Vista windows desktop HP oxoooooo8E Stop
my hp desktop computer always freezes last BSOD said STOP OXOOOOOO8E please help
Hello
Check with HP, their drivers support and documentation online and ask in the forums of HP on known issues.
Support HP & drivers
http://welcome.HP.com/country/us/en/support.html
Contact HP
http://welcome.HP.com/country/us/en/contact_us.html
HP forums
http://h30434.www3.HP.com/PSG/
========
Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).
We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
for the office or in the Documents folder and download them from there.
ZIP or download the content of the C:\Windows\minidump
Use SkyDrive to upload collected files
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65
--------------------------------------------------------------------------------------------------------------
Two main causes of this blue screen video drivers and BIOS - check with the system manufacturer
Site for graphics (Video) card and BIOS, then on site of the manufacturer of the device for the last video. It may be
other pilots to check there. Disable the installation of self as those who are older and if
Updates Windows suggests a pilot just HIDE. Antivirus is another possibility.
See methods of update driver generic in the next message.
BCCode: 8th 0x0000008E is the same as 0x1000008E
Cause
Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.
Common exception codes are:
0 x 80000002: STATUS_DATATYPE_MISALIGNMENT indicates that an unaligned data reference was encountered.
0 x 80000003: STATUS_BREAKPOINT indicates that a breakpoint or ASSERTION was met when no kernel debugger was attached to the system.
0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.
Solve the problem
If you do not have to debug this problem, you must use certain basic troubleshooting techniques:
- Make sure you have enough disk space.
- If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
- Try changing video cards.
- Check with your hardware vendor for updates to the BIOS.
- Disable the BIOS memory options such as implementing caching or shading.
If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.
If you do not know the specific cause of the exception, consider the following:
- Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
- Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.
If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.
If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.
Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.
The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved.chk, which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.
You can solve the problems of BIOS by upgrading the version of the system BIOS
BCCode: 8th 0x0000008E is the same as 0x1000008E<-- read="" this="">-->
* 1151.html? order = date http://www.faultwire.com/solutions-fatal_error/kernel-mode-exception-not-HANDLED-0x0000008E-
=============================================
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm
MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html
-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens. (If necessary)
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
http://www.winvistatips.com/disable-automatic-restart-T84.html
-------------------------------------------------------------------------
It comes to my convenience store generic bluescreen:
Here are a few ways to possibly fix the blue screen issue. If you could give the info to blue screen
This would help. Such as ITC and 4 others entered at the bottom left. And another error
information such as the STOP codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.
As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002
or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000
It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table - free
BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.
You can do without if needed fail or the Vista DVD or recovery command prompt mode
Options if your system was installed by the manufacturer.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx
You can try a system restore to a point before the problem started when one exists.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
-------------------------------------------------------------------------
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228
The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).
Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html
-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm
How to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html
How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx
-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233
Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htm
Understanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692
Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033
-------------------------------------------------------------------------
In some cases, it may be necessary.
The Options or Vista recovery disk Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.html
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
Tags: Windows
Similar Questions
-
Ive had this problem for a while now... imnew for vista because it's a new computer.
I've sorted it but I'm not sure how and now the problem is back.
When I right click on my desktop and go to personalization , then thecustomization and appearances I get error "windows internet explore has stopped working" and I get the options"restart this program" and "find a solution for this problem" if I don't find a solution nothing happens and if I restart the program it closes it.
Im not sure what to do as I installed all the updates, a little bit mast service Pack2, but now I can not install more as if I'm going toStart > all programs > windows update if I try to update I get the same error...
some can help me please.
Sally.
Hello
Sorry we don't communicate via this forum.
You need a real antivirus because these are the two antispyware. You have the PCtools antivirus
on the computer or just their toolbar in Internet Explorer?-------------------------------------------------
If there is no antivirus on the computer here is what I use and recommend (except for one
program like Prevx, you don't want more than one antivirus on the computer program
much less running because they interfere with each other and lower security). Each combination
of her below you will warn of malware without toolbar from PCtools running online.Here's what I use and recommend: (these are alll free and very effective versions.)
Avast and Prevx proved extremely reliable and compatible with all I have
launched on them. Microsoft Security Essentials and Prevx have also proven to be very
reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
Operation of the network.Prevx - Home - free
Windows Firewall
Windows Defender (is not necessary if you use MSE)
Protected IE - mode
IE 8 - SmartScreen filter WE (IE 7 phishing filter)
I also IE always start with asset if filter InPrivate IE 8.
(It may temporarily turn off with the little icon to the left of the + bottom
right of IE)Two versions of Avast are available 5.x and 4.8 x
Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
disabled - click OK
http://www.avast.com/free-antivirus-downloadAvast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
Finish those you don't use).
http://www.avast.com/free-antivirus-download#TAB4Or use Microsoft Security Essentials - free
http://www.Microsoft.com/Security_Essentials/Prevx works well alongside MSE or Avast
Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->PCmag - Prevx - Editor's choice
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspAlso get Malwarebytes - free - use as scanner only. If you ever think malware and that
would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
(not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
never find anything of note that I started to use this configuration.I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Windows Live Messenger 2009 stops on Windows Vista Business
Hello
For some time I have been using a desktop computer with Windows Vista Business (32 Bit) and for a few months now Windows Live Messenger 8 kept stop without reason. I rejected, given that it happened only once a day, I have so open again and kept using it.
Recently I installed the version 2009 (14.0.8064.206), when Microsoft announced it through Messenger itself. Since I don't Live Messenger stops very often, sometimes it takes about half an hour after I connect, sometimes even when I'm not logged in. The message is "Windows Live Messenger has stopped working", no code error, no file name.
I have spent at various sites and tried the following without result:
Removal of the installation, run the clean installation tool and reinstalling
Repair the installation of Live Messenger
clear the Cache of Contacts
Run as administrator
Compatibility mode for Windows XP SP2Is there anything else I can try? Please let me know.
Thank you
Angel
-MCP
Hi Angel,
You are welcome. Yes, please relay the State after the clean boot, as it will help to exclude all background programs. Please also pass on the model of your PC. Also, here are a few additional things to check.
1. Please check if you have the latest version of Adobe Flash installed.
2. Please also relay if the problem occurs when you try to share a file, using a Webcam, or by sending an Instant Message only.Thank you
Mary
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I use Bit Defender and Windows Security Center keeps locking things up through anti-virus and anti-spyware monituring and Bit Defender is on for it to not recognize (that is - I checked). Verification of reliability and said performance "setting up windows Security Center to stop monituring" them. How can I do this?
http://Windows.Microsoft.com/en-us/Windows-Vista/using-Windows-Security-Center
-
How to disable vista windows remote desktop
How to disable the windows vista Remote Desktop Home premium
http://www.howtogeek.com/HOWTO/Windows-Vista/turn-on-remote-desktop-in-Windows-Vista/
Do the above in reverse order.
See you soon.
Mick Murphy - Microsoft partner
-
I need activate vista windows aero them but them deleted on my computer and Desktop Manager disable on mine :(
Please see the following article with a Mr. fixit and other solutions for a missing aero theme:http://support.microsoft.com/kb/945000.
This is an art. that addresses both the disabled and disabled aero Desktop Manager problem and a possible solution:http://support.microsoft.com/kb/934561.
Here is another article on troubleshooting problems with Aero and Desktop Manager:http://www.mydigitallife.info/2006/12/17/get-and-enable-windows-vista-aero-glass-transparency-effect-and-desktop-windows-manager-dwm/.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
"Remote Desktop connection has stopped working" problem on Windows 7.
When I try to connect to one of my Windows 2003 servers from my Windows 7 Ultimate pc, I get an error:
"Remote Desktop connection has stopped working". It has something to do with the NLAapi.dll. If I rename this dll, TS works very well. I used the dll from another computer running Windows 7 RC and it works too, but in one of these two cases, while it corrects the TS connection, it causes other errors, maily with the network and sharing Center. Long story short, I think that there is a bug with nlaapi.dll. I can connect properly to my boxes of Windows XP SP3 servers. I ran all the updates on my 2 k 3 box, but still does not work.Here is the log of the event viewer:
Name of the failing application: mstsc.exe, version: 6.1.7600.16385, time stamp: 0x4a5bce80
Name of the failed module: NLAapi.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdfc9
Exception code: 0xc0000005
Offset: 0x000000000000c138
ID of the process failed: 0xf90
Start time of application vulnerabilities: 0x01ca55cc39bf05f0
The failing application path: C:\Windows\system32\mstsc.exe
Path of the failing module: C:\Windows\system32\NLAapi.dll
Report ID: 7772b4f0-c1bf-11de-bfa2-001d60a28de8Hi dekopolis,
Thanks for visiting the site of the community of Microsoft Windows 7. The question you have posted is related to the Server 2003 and would be better suited in the Community (Insert here). Please visit the link below to find a community that will provide the support you want.http://social.technet.Microsoft.com/forums/en-us/categories/ Shawn - Support Engineer - MCP, MCDST
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Windows Vista - Windows Explorer has stopped working :(
From the start of the base, I then selected each program one by one and then restarted the computer. I thought that if I disabled it "Windows Audio Endpoint Builder" and "Windows Audio", the problem stops... anyone... anyone? Flight Simulator is not the same without her lol...
Moderator Forum Keith has a few suggestions along this line to
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps. Good luck.
- -
Disabled Windows Desktop Manager
I have a laptop Windows Vista (Home Premium) and we were all working fine until recently I noticed that the windows Classic theme was back. Also, when I had it color and appearance of windows aero settings is blackened and 3 small windows are not displayed. After you run the difficulty Microsoft is Aero and visualization problems. He said that the Director of Windows desktop has been disabled. As you can see below, I tried many things to get it working again;
* Microsoft Fix its Aero and visualizations
* Use of CMD: Net Start/Stop uxsms
* I also checked the services.msc and Windows Desktop Manager and themes are running.
* The new values of string in REGEDIT
* Another user account
* System restore
If someone could help it would be greatly appreciated so I can recover my aero theme.
Thank you.
I have a laptop Windows Vista (Home Premium) and we were all working fine until recently I noticed that the windows Classic theme was back. Also, when I had it color and appearance of windows aero settings is blackened and 3 small windows are not displayed. After you run the difficulty Microsoft is Aero and visualization problems. He said that the Director of Windows desktop has been disabled. As you can see below, I tried many things to get it working again;
* Microsoft Fix its Aero and visualizations
* Use of CMD: Net Start/Stop uxsms
* I also checked the services.msc and Windows Desktop Manager and themes are running.
* The new values of string in REGEDIT
* Another user account
* System restore
If someone could help it would be greatly appreciated so I can recover my aero theme.
Thank you.
Thanks anyway. I solved this problem by using an application called vista Glazz who patched theme files if you are able to use third-party themes on your machine.
-
Why my blackberry 7.1 desktop software has stopped working?
my blackberry 7.1 desktop software has stopped working... .everytime when I open the software, it shows an error: he has stopped working... I also did the clean boot but nothing happned... Help, please!
Hello
Thanks for asking! If I understand correctly, your blackberry desktop software does not work. I suggest you follow the troubleshooting steps to check if this may help.
You receive an error message on the computer?
Try to uninstall and reinstall the Blackberry Desktop software and check if this may help. Make sure you download the latest version when reinstalling. For more information, you can consult the site of the manufacturer. Also contact Blackberry support if that's not enough.
http://us.BlackBerry.com/support/apps-and-software/downloads.html
Check out the link:
http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-programJust reply with the results. I'd be happy to help you further.
-
Vista hangs at the closing screen
Hello
Be sure and check with your security/Antivirus/antispyware managers and their forums that some of
those check removable drives and other devices that can cause a system hang you see.What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Desktop German sms stopped working
I get a message "Desktop German sms stopped working" whenever I start my computer. I tried with the updates, but it does not work. How can I get rid of him?
Try a system restore to a Date before the problem began:
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
http://www.windowsvistauserguide.com/system_restore.htm
Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.
See you soon.
Mick Murphy - Microsoft partner
-
SOLVED blackBerry Smartphones: BlackBerry Desktop Manager has stopped working
Hello.
Let me start by saying: I have a footstool to laptop Dell Vista 64-bit with 4 gig ram. I have Desktop Manager v 4.7 installed and work much to sync my Outlook calendar and my Blackberry.
From a week ago, the synchronization process gets all the way to the end and I get a message saying:
"BlackBerry Desktop Manager has stopped working" and I have the choice of "check online for a solution and close the program" or "close program". When I click on "view problem details I get this:
Signature of the problem:
Problem event name: APPCRASH
Application name: DesktopMgr.exe
Application version: 4.7.0.37
Application timestamp: 49c1b7ab
Fault Module name: StackHash_6d57
Fault Module Version: 6.0.6001.18000
Timestamp of Module error: 4791 has 783
Exception code: c0000374
Exception offset: 000aada3
The system version: 6.0.6001.2.1.0.768.3
Locale ID: 1033
Additional information 1: 6 d 57
More information 2: a8064b034a1a2f2f618d075073f8fe42
3 more information: 2dc5
Additional information 4: dbcf31406c7084dbad1f33e2de526f4eRead our privacy statement:
http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409Any ideas?
I found this on another site:
(1.) start the Desktop Manager software
2.) connect the blackberry using the USB connector
3.) select "backup and restore".
4.) select "Advanced".
5.) look at the list of information to be displayed in the window "device memory" on your computer
6.) select "calendar all" and delete it
7.) go back to the main screen and synchronize them.
8.), everything should work fine!Essentially, it's a data file of damaged calendar on the Blackberry device, apparently.
-
Error on blackBerry Smartphones: Blackberry Desktop Manager has stopped working
I use Desktop Manager 4.7.0.32 with a Blackberry Bold (9000); I sync with Outlook 2007 and I am running Windows Vista 64-bit Ultimate w / SP1. Synchronization worked well for many years with previous blackberries, but the synchronization problem appeared after a year or two of use with my previous camera curve. I replaced the curve with the bold thinking which damaged equipment could be the problem (one too many drops).
However, the problem persists. While it seems I can synchronize with success a way (from PC to BB), Director of office falls down to halfway through synchronization of calendar entries in a synchronization two-way, unless there has been no new entry calendar on the BB. The error is an error generated windows inidcating: Blackberry Desktop Manager has stopped working.
I tried every solution I could find on the web, namely:
- Uninstalling and reinstalling Desktop Manager, making sure that I run the installer as administrator.
- My Blackberry wiping and reinstalling the operating system (I use 4.6.0.162)
- Delete the Intellisync folder
- Run scanpst on my Outlookpst file
- Clear the entries of calendar on the Blackberry (temporary solution only)
The latter is the only approach that has produced no results. If I delete the entries on the Blackberry, the
process synchronization adds them correctly, and the next time I run the synchronization, it works without a hitch. As soon as I did all the entries on the BB unit however, Desktop Manager crashes again, and the only way I can make it work is to clear the entries on the Blackberry and start over.
I'm several months and both handsets of BB has invested in this issue now. I have a new fancy camera, but am recorded in writing of the appointments on paper when I am out of the office because I know they used to synchronize if I enter them at BB. Type of defeated half the point of a blackberry...?
Getting desperate here. Help is appreciated.
Brad
Hello Brad!
I had the same annoying problem that you guys have described here.
After trough fishing a lot of post and forums I found a very surprising solution for another type of BB and a different version of the DM on XP and not Vista. Being desperate I tried and miraculously it worked!Start the DM BB and go - Syncronize - set - synchronisation - synchronization (button) - calendar - Advanced (button) - mapping fields (field mapping button) and I got rid of the synchronization between the flag "alarm" and the "free occupied" and the fields "invited".
I did it and now everything works perfectly.
I have a BB Bold, Vista Ultimate (32 bit), MSOffice 2007 (PRO) and a DMv4.7.
I hope it will work for you also.
Kind regards
Steve -
Transition of accessible technology among desktop computers has stopped working
When I start my laptop I get "transition technologies accessible between desktop computers has stopped working" on my Vista...
How can I fix it?Hello
This error message is not known to me and it seems that there are not many details about this error.
Have you checked if you can set the BONE to this early time before this error message appeared?
Check it!
Maybe you are looking for
-
How to restore my personal toolbar in Firefox 4.0b6?
When I installed the 4.0beta6 (3.6.9 or 10, I think), it wiped out my personal toolbar. It seems I found a response to restore once, but now I can not find.
-
Problems with ad-hoc internet compirtir
Saludos has created ad hoc red una y al end el proceso no me da the internet sharing option is can activar in otro sitio, Gracias y saludos nuevo
-
Saving data during monitoring continues to supply
Hello I started to learn the LabView recently and I worked on this small code. The idea is to monitor the power supply voltage and data current and Records in a spreadsheet when there is a change in voltage/current continuous playback or change volta
-
There shared certificate truststore is BB OS 7 +?
My company explores opportunities to develop its application for the BB platform. For iOS, we learned the hardway that ther eis no shared truststore X.509 client-side only certificates obtained by a soft for use by the user in other applications. For
-
Hello Can someone help me pick the good IOS for router cisco 3660 for this module to be recognized by the router. I think the following IOS would work are these correct? c3660-ik9o3s - mz.12.4 - 4.T c3660-ik9o3s - mz.12.2 - 15.ZJ Thank you