Transition of accessible technology among desktop computers has stopped working
When I start my laptop I get "transition technologies accessible between desktop computers has stopped working" on my Vista...
How can I fix it?
Hello
This error message is not known to me and it seems that there are not many details about this error.
Have you checked if you can set the BONE to this early time before this error message appeared?
Check it!
Tags: Toshiba
Similar Questions
-
Why my blackberry 7.1 desktop software has stopped working?
my blackberry 7.1 desktop software has stopped working... .everytime when I open the software, it shows an error: he has stopped working... I also did the clean boot but nothing happned... Help, please!
Hello
Thanks for asking! If I understand correctly, your blackberry desktop software does not work. I suggest you follow the troubleshooting steps to check if this may help.
You receive an error message on the computer?
Try to uninstall and reinstall the Blackberry Desktop software and check if this may help. Make sure you download the latest version when reinstalling. For more information, you can consult the site of the manufacturer. Also contact Blackberry support if that's not enough.
http://us.BlackBerry.com/support/apps-and-software/downloads.html
Check out the link:
http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-programJust reply with the results. I'd be happy to help you further.
-
"Remote Desktop connection has stopped working" problem on Windows 7.
When I try to connect to one of my Windows 2003 servers from my Windows 7 Ultimate pc, I get an error:
"Remote Desktop connection has stopped working". It has something to do with the NLAapi.dll. If I rename this dll, TS works very well. I used the dll from another computer running Windows 7 RC and it works too, but in one of these two cases, while it corrects the TS connection, it causes other errors, maily with the network and sharing Center. Long story short, I think that there is a bug with nlaapi.dll. I can connect properly to my boxes of Windows XP SP3 servers. I ran all the updates on my 2 k 3 box, but still does not work.Here is the log of the event viewer:
Name of the failing application: mstsc.exe, version: 6.1.7600.16385, time stamp: 0x4a5bce80
Name of the failed module: NLAapi.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdfc9
Exception code: 0xc0000005
Offset: 0x000000000000c138
ID of the process failed: 0xf90
Start time of application vulnerabilities: 0x01ca55cc39bf05f0
The failing application path: C:\Windows\system32\mstsc.exe
Path of the failing module: C:\Windows\system32\NLAapi.dll
Report ID: 7772b4f0-c1bf-11de-bfa2-001d60a28de8Hi dekopolis,
Thanks for visiting the site of the community of Microsoft Windows 7. The question you have posted is related to the Server 2003 and would be better suited in the Community (Insert here). Please visit the link below to find a community that will provide the support you want.http://social.technet.Microsoft.com/forums/en-us/categories/ Shawn - Support Engineer - MCP, MCDST
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Remote Desktop Connection has stopped working since 7 for 2008
Hello
Dears I have strange problem and I have read everything discussed here, but it's not helping
I have asus laptop with Windows 7 Home x 64 N53SM
everything beautiful, and up-to-date
Remote Desktop works well also
one problem I can't use desktop remotely from my laptop to any server that is running windows server 2008 exactly... .other version 2003 work ok
When I try to access to any server ruin win 2008 Server and put the server ip and password user name years and hit enter I see the error message
Remote Desktop Connection has stopped working and computer laptop freez second then back with this message
(Remote Desktop Connection has stopped working)
A problem caused program stop working correctly
Windows will close the program and notify you if a solution is availableThis is the complete log of the event viewer
Results for: Microsoft product: Windows operating system; Version: 6.1.7600.16385; Event ID: 1000. Event source: Application error;
===========
Name of the failing application: mstsc.exe, version: 6.1.7601.17514, time stamp: 0x4ce7ab44
The failed module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
Exception code: 0xc0000374
Offset: 0x00000000000c40f2
ID of the process failed: 0 x 1418
Start time of application vulnerabilities: 0x01cd48bcf13be48a
The failing application path: C:\Windows\system32\mstsc.exe
The failed module path: C:\Windows\SYSTEM32\ntdll.dll
Report ID: 39102a22-b4b0-11e1-a89a-005056c00008===========
Please help me to solve this problem without need format :)
Hello
As you try to desktop connection remotely from Windows 7 to Windows Server 2008, it would be preferable to send the same in the Technet community for more help.
http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads
Hope the information is useful.
-
Smartphones from blackBerry Desktop Manager has stopped working
"Desktop Manager has stopped working", that's what I get when trying to sync my curve. He will get through the address book but stops each time on the calendar. Any suggestions?
Hmm. Maybe it's something in your Calendar database is corrupted. Your device has never been synchronized before? There is a way to clear the Calendar database. So if you have your device to sync with Outlook, after it is cleared from the BlackBerry, you can try to synchronize again.
To clear the Calendar database, you can go to the Office Manager. Backup and restore | Advanced. On the right, select the Calendar database and click the clear button. Then try to synchronize again
-
SOLVED blackBerry Smartphones: BlackBerry Desktop Manager has stopped working
Hello.
Let me start by saying: I have a footstool to laptop Dell Vista 64-bit with 4 gig ram. I have Desktop Manager v 4.7 installed and work much to sync my Outlook calendar and my Blackberry.
From a week ago, the synchronization process gets all the way to the end and I get a message saying:
"BlackBerry Desktop Manager has stopped working" and I have the choice of "check online for a solution and close the program" or "close program". When I click on "view problem details I get this:
Signature of the problem:
Problem event name: APPCRASH
Application name: DesktopMgr.exe
Application version: 4.7.0.37
Application timestamp: 49c1b7ab
Fault Module name: StackHash_6d57
Fault Module Version: 6.0.6001.18000
Timestamp of Module error: 4791 has 783
Exception code: c0000374
Exception offset: 000aada3
The system version: 6.0.6001.2.1.0.768.3
Locale ID: 1033
Additional information 1: 6 d 57
More information 2: a8064b034a1a2f2f618d075073f8fe42
3 more information: 2dc5
Additional information 4: dbcf31406c7084dbad1f33e2de526f4eRead our privacy statement:
http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409Any ideas?
I found this on another site:
(1.) start the Desktop Manager software
2.) connect the blackberry using the USB connector
3.) select "backup and restore".
4.) select "Advanced".
5.) look at the list of information to be displayed in the window "device memory" on your computer
6.) select "calendar all" and delete it
7.) go back to the main screen and synchronize them.
8.), everything should work fine!Essentially, it's a data file of damaged calendar on the Blackberry device, apparently.
-
Error on blackBerry Smartphones: Blackberry Desktop Manager has stopped working
I use Desktop Manager 4.7.0.32 with a Blackberry Bold (9000); I sync with Outlook 2007 and I am running Windows Vista 64-bit Ultimate w / SP1. Synchronization worked well for many years with previous blackberries, but the synchronization problem appeared after a year or two of use with my previous camera curve. I replaced the curve with the bold thinking which damaged equipment could be the problem (one too many drops).
However, the problem persists. While it seems I can synchronize with success a way (from PC to BB), Director of office falls down to halfway through synchronization of calendar entries in a synchronization two-way, unless there has been no new entry calendar on the BB. The error is an error generated windows inidcating: Blackberry Desktop Manager has stopped working.
I tried every solution I could find on the web, namely:
- Uninstalling and reinstalling Desktop Manager, making sure that I run the installer as administrator.
- My Blackberry wiping and reinstalling the operating system (I use 4.6.0.162)
- Delete the Intellisync folder
- Run scanpst on my Outlookpst file
- Clear the entries of calendar on the Blackberry (temporary solution only)
The latter is the only approach that has produced no results. If I delete the entries on the Blackberry, the
process synchronization adds them correctly, and the next time I run the synchronization, it works without a hitch. As soon as I did all the entries on the BB unit however, Desktop Manager crashes again, and the only way I can make it work is to clear the entries on the Blackberry and start over.
I'm several months and both handsets of BB has invested in this issue now. I have a new fancy camera, but am recorded in writing of the appointments on paper when I am out of the office because I know they used to synchronize if I enter them at BB. Type of defeated half the point of a blackberry...?
Getting desperate here. Help is appreciated.
Brad
Hello Brad!
I had the same annoying problem that you guys have described here.
After trough fishing a lot of post and forums I found a very surprising solution for another type of BB and a different version of the DM on XP and not Vista. Being desperate I tried and miraculously it worked!Start the DM BB and go - Syncronize - set - synchronisation - synchronization (button) - calendar - Advanced (button) - mapping fields (field mapping button) and I got rid of the synchronization between the flag "alarm" and the "free occupied" and the fields "invited".
I did it and now everything works perfectly.
I have a BB Bold, Vista Ultimate (32 bit), MSOffice 2007 (PRO) and a DMv4.7.
I hope it will work for you also.
Kind regards
Steve -
Curve 8900 on T-Mobile. Fune Sync worked until a few days ago. Recently used the Blackberry site to update all the software after that I received a message on my phone to do so (http://na.blackberry.com/eng/update/). Now, in the middle of synchronization (Bluetooth or USB), Windows tells me that "Blackberry Desktop Manager has stopped working". It always stops working at the stage where Desktop Manager treats the device calendar.
I tried all the stuff I can think: uninstalling and reinstalling, Outlook Update, disable Windows Defender, USB and Bluetooth, used the T-Mobile site and the EDGE of the site... nothing. Help!
Desktop Manager v5.0.0.11
Handheld Software v4.6.1.231
Windows Defender is DISABLED
Synchronize with Outlook 2007
Could mean that the calendar on the BlackBerry database is corrupted. Are the entries in Outlook until data on the BlackBerry? If so you can try out the BlackBerry database, and then synchronize again. To clear the database on the BlackBerry, go to the backup and restore | Advanced. On the right, you will see the BlackBerry databases. So you can choose the calendar, then click on the delete button. That will remove all entries from the BlackBerry calendar. Then try to sync.
-
Currency converter Desktop Gadget has stopped working
The conversion of currency gadget has stopped working - it has been frozen on the same values for 4 or 5 days. On HP Pavillion running Windows 7.
Hi Denny,
If you're still experiancing this issue and feel that it may be a database issue. Please provide your comments here http://mymfe.microsoft.com/Windows%20%207/Feedback.aspx?formID=195
-
Bing desktop app has stopped working and was closed
Whenever I start my computer, I get the message boot up 'Bing Applicatoin Office ceased to operate and was closed. I still see as a Bing backgroung page updated, but bing entry window disappears and is closed.
I don't know what to do to solve this problem, but to uninstall this app buggy and a replacement product.
Any ideas?This only adds to the other Microsoft issues of my I. E. Explorer 9 constantly generating a message "XXXy (website) has stopped responding relatives or retrieve web page.
Hi Alex,
Thanks for the reply.
Please uninstall and reinstall IE9.
How to install or uninstall Internet Explorer 9?
http://Windows.Microsoft.com/en-us/Windows7/how-do-i-install-or-uninstall-Internet-Explorer-9
Post back with the result.
-
Creative cloud desktop application has stopped working
I had several problems with creative cloud since I moved from CS 5.5. To be honest I spend most of my time trying to convince myself all the CC because benefits that it is intrinsically reliable and most unstable - especially when approaching deadlines. And no matter whether Mac or PC. I have a Mac at home and a PC at work. Trying to problem solve errors that constantly make my user experience simply horrible.
This time around the creative Cloud application stopped working a couple of days without apparent reason. I uninstalled the old version and downloaded the latest version, then I could update the other applications. I clicked on the .exe file - absolutely nothing! All ideas welcome.
Hello
See the system requirements system requirements | Adobe Creative Cloud
You can also consult Re: Creative Cloud Desktop works not?
Concerning
-
HP Pavilion: Before port USB on HP desktop computer has stopped working
My HP desktop computer is about 2 years old and has two USB ports on the front and a number on the back. I had no problem with any of the ports until I used a USB in the port now broken and caused a power outage that now this port doesn't recognize any USB device. It says "USB device not recognized. The last USB device you connected to this computer worked badly and Windows does not recognize. »
I tried to uninstall and reinstall the USB ports on the Device Manager and have lived all the suggestions on the HP support site and the Microsoft support site. The defective USB key must have caused damage to the track. I hope you can suggest something that I can do to get it working again.
Hello
The only port on the front is damaged. The USB key must have damaged only this USB port. I'd like to reuse this memory bar.
You need to replace the USB module, two ports USB 3.0 of housing as the two front ports use the same module and connections to the motherboard.
You will probably need to go to HP for the part.
You should be able to get access to the component by removing the front bezel. Remove the side panel also. You should see the connection of the cable and add him the USB 3.0 connector front on the motherboard.
Jay
-
Intel Turbo Boost Technology Monitor 2.0 has stopped working
What this means and why do I need it. There is no instructions on how to restart the Intel Turbo Boost Technology Monitor 2.0
The program indicator appears on my screen and will not remove or it will switch to another position. AND she will not close. That is what it is?
Hello
Were there any changes (hardware or software) to the computer before the show?
Method 1: Perform the steps in the article mentioned below and check if the problem persists.
http://communities.Intel.com/thread/23562
Method 2: If the problem persists, contact the support of the intel to get help.
http://www.Intel.com/p/en_US/support?IID=HDR+support
Hope this information helps.
-
BlackBerry Smartphones Blackberry Desktop Software has stopped working
On the audit of the system requirements for BB DM, I found mention of Microsoft .NET Framework 3.5.1.
On checking my system, this was not enabled. Once activated, the DM BB seems to work as before. This has happened previously causes the problem that I am not the wisest?
-
WVC54GCA Firmware Upgrade desktop application has stopped working
Hello
I've recently updated the firmware on 2 of my 3 cameras WVC54GCA version «v1.1.00 build 02» Cameras flashed fine and still have network connectivity and everything seems in good condition. The «Internet home monitoring Camera» Software Office stopped working for both cameras. The third camera still works fine!
The software detects the cameras and allows me to put in the necessary adjustments; However only shows a black video window. After installation they cameas are listed in the status of camera window, but the eye little view is not "verified" green.
Help!
You updated the firmware on the camera, I suggest you to reset the camera, Power Cycle it and re - configure from scratch.
Maybe you are looking for
-
Hello, I have a question about the creation of Photo of HP software. East - the possible result of photo Edition of project save a graphic file (JPEG, BMP, etc.)?
-
convert datalog reference to "generate report object Referecnce.ctl".
I inherited a LV6.1 code with a lot of reports. The former reference number of datalog used to refer to the reports has been updated report object Reference.ctl. In the original code, the first step is to check if the number of datalog was not "a pat
-
CanoScan 5600f scanner a document
I'm scanning three pages. Analysis of the first page in PDF format (as it is supposed to), but the second page analysis as an image. A third page then analyses in PDF format. Any ideas why this happens? I have to open the image in another program,
-
Get help to use local help and support Help Center for XP sp3
Help and support center does not open, msg says help and support service does not work, but check indicates it is enabled, but error msg says 1083, the program does not work?
-
Windows Mail