VLAN / s on ASA5510

Similar Questions

• Expand the production VLAN behind ASA5510 to the remote site and 2821

  I have a 5510 ASA and here to contact one of the subnets behind this ASA out to my house which has a modem cable, a switch/router wireless and then behind that I have a router 2821.  I have read and it seems that L2TP can be the way to go, but can not find config examples.  Yet once again, I'd extend an and nail a permanent connection of one of VLAN in the production network to the bottom of my house using my cable modem and the 2821.  Examples of configuration would be very appreciated!  In addition, any recommendations for the IOS 2821 would be very appreciated.  Finally, the L2TP looks like how I need to go?  I enclose a very basic Visio diagram of what I'm trying to do.  Thank you, john

  You must L2TPv3.

  ASA does not support but will pass L2TPv3 borrowing.

  At work, you will need to add another router. L3 switches does not support it.

  The configuration of a router would be:

  Pseudowire-class test

  L2TPv3 encapsulation

  IP local interface loopback0 (this will be the source of the tunnel, can use any interface with the IP address access remote xconnect)

  !

  int fas0/0.30

  (do not put an ip address here)

  encapsulation dot1q 30

  pw-class xconnect X.X.X.X 1000 test

  X.X.X.X is the IP the remote router interface, it serves to "interface local ip" in the remote configuration

  Make sure that corresponds to 1000 (VC ID) on both sides

• App 5.1 server does not not on different VLANS

  Helloooo

  I just installed a new server and I use the server application. Everything seemed to work fine until I moved my iMac to a VLAN different. Profiles and update settings do not push to the iMac and sit at a stadium in waiting. Also to register the new iMacs on the server I get to the login server window and it crashes it and does not authenticate. Screen opens by saying that I can open a second window and registration. When I try to register, I get an unknown error and that it fails. It seems timeless. I tried to change a lot of settings prescribed by other users, but nothing helped. Someone at - it advice on what could be the problem.

  See you soon

  Sean

  Hello

  I took the easy on this way and bring a USB ethernet to my mac so that I have two physical interfaces. An in each VLAN.

  There are other ways to do this, and this is a good article:

  https://blog.Pivotal.IO/Labs/Labs/using-deploystudio-across-Subnets-a-Path-Not-t Aken

  Kind regards

  Erik

• Satellite Pro U400: How to configure the VLAN for the Marvell Yukon LAN control.

  Hi all
  I need to access the 2 VLANS with the controller LAN Marvell Yukon 88E8072 for my Satellite Pro U400. I installed the necessary Configuration utility network Marvell tell me after installation, VIRTUAL local network settings must be mounted in the Device Manager (Windows 7, right click on computer, properties, click device/network management adapters/double on Marvell Yukon 88E8072 PCI-E Gigabit Ethernet Controller), I can't find a thing to configure here but wake-on-LAN.

  Any suggestion? Thank you!

  Michael

  Hello

  I think that in this case, you can use a network switch.

• 2910al - 48G Switch: problem with the VLAN

  Hi all,

  I write a new message because I don't know what is happening on my SW series 2910al - 48G and v1910 - 48G.

  I put on the main core SW VLAN 610 and I put to this VLAN IP addreess 100.110.10.1 24-bit etc and it worked fine until yesterday. I change only PLEASE and I enebale STP - loop protect for ports in the range 1-52. (now I rolback this settings as was before)

  

  STP configuration

  

  Now, every PC that has for a long time what IP range 100.110.10.1 24-bit works fine, but new PC have problem with to get the new IP address. I tested it add a static and same address does not work.

  Introduced in second v1910 SW - 48 G VLAN as below

  I connect this flexible switch this \port SW 2910 - G 48, 46 (Vlan 610 tag) <>- at v1910-48G\ port 50 SW (Vlan 610 tahgged) other ports on this switch I put not marked.

  Configuration file for sw v1910 - 48G looks to below:

  #
  activate default domain system
  #
  LLDP enable

  #
  domain system
  disable the access limit
  Active state
  Disable Idle-cut
  self-service-url disable

  #
  rstp STP mode
  enable STP
  #
  NULL0 interface
  #
  GigabitEthernet1/0/1 interface
  hybrid type port link
  port hybrid vlan tagged 610 620
  untagged port hybrid vlan 1
  #
  interface GigabitEthernet1/0/2
  access port vlan 610
  #
  interface GigabitEthernet1/0/3
  access port vlan 610
  #
  interface GigabitEthernet1/0/4
  access port vlan 610
  #
  interface GigabitEthernet1/0/5
  access port vlan 610
  #
  interface GigabitEthernet1/0/6
  access port vlan 610
  #
  interface GigabitEthernet1/0/7
  access port vlan 610
  #
  interface GigabitEthernet1/0/8
  access port vlan 610
  #
  interface GigabitEthernet1/0/9
  access port vlan 610
  #
  interface GigabitEthernet1/0/10
  access port vlan 610
  #

  #
  interface GigabitEthernet1/0/49
  hybrid type port link
  port hybrid vlan tagged 610 620
  port hybrid vlan 1 10 untagged
  #
  interface GigabitEthernet1/0/50
  hybrid type port link
  port hybrid vlan tagged 610 620
  port hybrid vlan 1 10 untagged
  #
  interface GigabitEthernet1/0/51
  hybrid type port link
  port hybrid vlan tagged 610 620
  untagged port hybrid vlan 1
  #
  interface GigabitEthernet1/0/52
  hybrid type port link
  port hybrid vlan tagged 610 620
  untagged port hybrid vlan 1

  etc...

  Could you help me when I made a mistake?

  THX

  The problem was that solve this problem.

  I have blocked all ports. It was a problem. I change several settings and everything works well.

• Problem VLAN HP Mini 110-4101er

  Hello. We have a level 2 + switch with VLAN. This netbook is unable to obtain an IP address from the DHCP server. Parameters default network has been applied. The same thing with another HP laptop with the same NIC Realtek. But another Acer netbook works fine on the same switch port. We do not know why.
  
  Any help would be appreciated.

  The problem is resolved. Had to download the new drivers and the utility of diagnosis on the Realtek site. With the help of the utility put in place of VLAN ID 0. Everything works fine.

• Ping GS752TP Cant VLAN IP

  I have a switch are not currently connected to the network, which will be repalce one switch of aging there address static IP address 10.100.6.225 and created a virtual local network 50 that will be for the devices of shoretel, put in place a VIRTUAL LAN, whose 10.100.50.227 and active in IP Routing IP address.

  The new switch has a gbic for current media converter will disappear, but I have all ports currently left the vlan1 and ports 1-46 Untagged on vlan 50, if I connect a pc on any port 1-46 I can ping 10.100.6.227 but not 50.227, what don't get me? and how do I configure port 48 which will have a shoretel switch on the network connected on 50?

  Thank you

  Hi Dakota68,

  Sorry for the late reply,

  Please check if the VLAN ID 50 is defined as the PVID for ports 1-46 by going to

  Switch > VLAN > advanced > Configuration of Port's PVID.

  The PVID column for the port 1-46 should say '50' (VLAN ID for VLAN.50)

  Please see more on page 113 here PVID:

  http://www.downloads.NETGEAR.com/files/GDC/GS728TPS/GS7xxTS_GS7xxTPS-SWA_1Mar12.PDF?CID=wmt_netgear _...

  And Yes, I recommend that you create another virtual local network for servers.

  Try and let us know if it works

• Compatibility of VLAN with Cisco

  Hello

  We just bought 10 x new Netgear switches (all M4100) to add to an existing Cisco infrastructure.

  Simple configuration with only 6 Valns.

  5: Admin, 30: VOIP, 101: management, 100: a set of Workstations, 102: second series of Workstations, 200: IPTV, 400: Internet, 401: Wireless Management

  All I wanted to do was: 2 last ports each switch netgear = T and all the VLANS. I have not identified all ports if I want to use in the appropriate vlan

  101 of VLAN is my Managementt Vlan. (Need to configure inter vlan routing for this to work)

  I only turned on three switches up to now and all three do not work. They work for a while and that packets but do not receive all.

  What I am doing wrong?

  What I need to get rid of the original vlan1 on the netgear?

  Is that what I need config in the STP to make these compatible with Cisco (300 and 400 series) switches.

  I use an optical backbone on Cisco and Netgear switches.

  Sincere greetings,

  OLAF

  Hi Moussa,.

  Thanks for reaching out.

  We got it working.

  Step 1: upgrade to the latest firmware.

  Step 2: Forget the MISTLETOE.

  We had a few questions about the old firmware - causing links to trunk have some incompatibility with their tag and removed the images between Cisco and Netgear brand.

  After the upgrade of the firmware that we had access to "switchport mode access" and "switchport mode trunk" orders fixing the access port and trunking issues.

  Thank you Mr President,

  OLAF

• VLAN greyed, cannot be changed

  

  

  We have a Netgear GS108PEv3 which is installed in a remote office. It has a 802. 1 q configuration as follows:

  P1, 2, ID no marked 6-10

  P3, 4, 7, 8 untagged ID 20

  Tag 10 and 20 P5

  I need to change the configuration of VLANS. I browsed the Web GUI and used the 'Prosafe' utility, but in both radio buttons are grayed out.

  The switch still works in its current configuration, but I need to change it. Can I recover from this, or a switch corrupted & need default reset?

  Yes, I unfortunately had to go to the site & the selector. From now on, it's job & variable remote, but I have to say that my confidence in the future is not high...

• For access to the VLAN specific after VPN

  Hello

  I have a SRX5308 and have set up a PPTP VPN server. I have four VLANS configured, say:

  10.0.A.0/24

  10.0.B.0/24

  10.0.C.0/24

  10.0.D.0/24

  and setting up the PPTP server is giving VPN clients

  10.0.F.20 - 29

  I am able to connect to the server and surf as "from the network. But how can I set up a road (?) so I'm able to access (or logically be attached to) devices on 10.0.A.0/24 my VPN client network?

  I have searched high and low for this but didn't find clear instructions on how to do it.

  Any help would be appreciated.

  Thank you

  Joakim

  Ah yes, that would explain

  IPSec is very easy to set up, don't be scared by the many parameters - you won't really do much with then. In regard to the full domain name, you will define in the client, you connect since so little matter where.

  With the Netgear IPSec client, it is really easy and the support team can help you make it work... There is a 30 day free trial so you can test it.

  There is also a free third-party client called Shrewsoft, it is quite easy to set up too, but some features seem to be difficult to make it work, I would recommend the official client to Netgear, but if you want to give shrew a go, I've written a small guide just in time for a very basic client-to-box installation with it.
  http://www.hexnet.se/srx5308-IPSec-VPN-with-shrew-soft/

  I think that there were some problems with the Shrew and certain firmware even if, at some point given, you couldn't perform mode config (i.e. what shrew own manual shows) but I can't work with the latest firmware of the srx5308... But I didn't spend too much time on this, I'm sure that it can be understood.

• VLAN ACL M4100

  Dear Sir

  We want to create an access list to isolate our Wifi network invited all the other vlan.
  When I do, diseapper of the other SSID of our laptops.

  I applied to the access list to our direction to SVI comments in

  ! Description of the system "M4100 - 24 G - POE + ProSafe 24 port Gigabit L2 + Managed Switch w ith PoE +, 10.0.2.13, B1.0.1.1"
  ! Version of the software system "10.0.2.13".
  ! System Up Time "28 days 22 hours 39 minutes 58 seconds"
  ! Other packets QOS, IPv6, routing
  ! Current SNTP synchronized time: SNTP last attempt status is not successful
  !
  database of VLAN
  VLAN 99 200-208 455-456 999
  VLAN 99 name 'TEST '.
  name of VLAN 200 'Clients '.
  name of VLAN 201 "Telefonie.
  name of VLAN 202 "guest."
  name of VLAN 203 'fr '.
  the name of VLAN 204 "TD."
  VLAN name 205 "DMZ".
  VLAN name 206 'printers '.
  VLAN name 207 'media '.
  VLAN 208 name 'Wireless '.
  VLAN name 999 "3com".
  VLAN 1 1 routing
  -Other - or ITU (q)
  VLAN 200 2 routing
  VLAN 201 3 routing
  VLAN routing 202 4
  VLAN routing 5 203
  VLAN routing 204 6
  VLAN routing 205 7
  VLAN routing 206 8
  VLAN routing 9 207
  VLAN routing 10 208
  VLAN routing 11 455
  VLAN routing 12 456
  VLAN routing 99 13
  output

  network mgmt_vlan 203
  IP http secure server
  Configure
  time range
  default IP gateway - 10.253.255.1
  level of 483f42190380e8780a9d32a3c63d31b86d6ad49b870db8306af86a9ce3e06cd9a39f66e666e86f0aaab777b0ab9fe571908247c31d904463d1a0767400f8e763 user name 'admin' password encrypted 15
  level password user name "secit" encrypted 15 912ba98d721224814ea15db6dec1701819e75dfcafa635831e9eab148c105c20ba85dc61882dd47a65eb66dff6cf0005a1a2232b6957ec898cd6187c6bdbb510
  line console
  output
  -Other - or ITU (q)

  line telnet
  output

  ssh line
  output

  spanning tree bpduguard

  !

  IP access-list ACL_Wizard_IPv4_0
  output

  IP access-list Deny_Guest_Intervlan_Routing
  deny ip 10.253.2.0 0.0.0.255 10.253.0.0 0.0.0.255
  deny ip 10.253.2.0 0.0.0.255 10.253.1.0 0.0.0.255
  deny ip 10.253.2.0 0.0.0.255 10.253.3.0 0.0.0.255
  deny ip 10.253.2.0 0.0.0.255 10.253.4.0 0.0.0.255
  deny ip 10.253.2.0 0.0.0.255 10.253.5.0 0.0.0.255
  deny ip 10.253.2.0 0.0.0.255 10.253.6.0 0.0.0.255
  -Other - or ITU (q)
  deny ip 10.253.2.0 0.0.0.255 10.253.7.0 0.0.0.255
  deny ip 10.253.2.0 0.0.0.255 10.253.8.0 0.0.0.255
  deny ip 10.253.2.0 0.0.0.255 10.253.9.0 0.0.0.255
  deny ip 10.253.2.0 0.0.0.255 10.253.11.0 0.0.0.255
  IP 10.253.2.0 allow 0.0.0.255 0.0.0.0 0.0.0.0
  output

  class-map correspondence ClassVoiceVLAN ipv4
  game of vlan 201
  output

  Policy-map PolicyVoiceVLAN in
  class ClassVoiceVLAN
  Assign-queue 3
  output

  output

  interface 0/1
  Description "ACCESSPORTS.
  participation of VLAN include 200-201
  VLAN tagging 201
  -Other - or ITU (q)
  output

  interface 0/2
  VLAN 201 votes
  policy - PolicyVoiceVLAN
  bandwidth 1000000
  pvid VLAN 200
  participation of VLAN include 200-201
  VLAN tagging 201
  IP mtu 1500
  output

  interface 0/3
  VLAN 201 votes
  policy - PolicyVoiceVLAN
  bandwidth 100000
  pvid VLAN 200
  participation of VLAN include 200-201 204
  VLAN tagging 201
  -Other - or ITU (q)
  IP mtu 1500
  output

  interface 0/4
  VLAN 201 votes
  policy - PolicyVoiceVLAN
  bandwidth 100000
  pvid VLAN 200
  participation of VLAN include 200-201
  VLAN tagging 201
  IP mtu 1500
  output

  interface 0/5
  VLAN 201 votes
  policy - PolicyVoiceVLAN
  bandwidth 1000000
  pvid VLAN 99
  participation of VLAN include 99 200 - 201
  -Other - or ITU (q)
  VLAN tagging 201
  IP mtu 1500
  output

  interface 0/6
  VLAN 201 votes
  policy - PolicyVoiceVLAN
  bandwidth 100000
  pvid VLAN 200
  participation of VLAN include 200-201
  VLAN tagging 201
  IP mtu 1500
  output

  interface 0/7
  VLAN 201 votes
  policy - PolicyVoiceVLAN
  Description "ACCESSPORTS.
  pvid VLAN 203
  -Other - or ITU (q)
  participation of VLAN include 200-201
  VLAN tagging 201
  output

  0/8 interface
  VLAN 201 votes
  policy - PolicyVoiceVLAN
  bandwidth 100000
  pvid VLAN 200
  participation of VLAN include 200-201
  VLAN tagging 201
  IP mtu 1500
  output

  interface 0/9
  VLAN 201 votes
  policy - PolicyVoiceVLAN
  bandwidth 100000
  pvid VLAN 200
  -Other - or ITU (q)
  participation of VLAN include 200-201
  VLAN tagging 201
  IP mtu 1500
  output

  interface 0/10
  VLAN 201 votes
  policy - PolicyVoiceVLAN
  bandwidth 100000
  pvid VLAN 200
  participation of VLAN include 200-201
  VLAN tagging 201
  IP mtu 1500
  output

  interface 0/11
  VLAN 201 votes
  policy - PolicyVoiceVLAN
  bandwidth 100000
  -Other - or ITU (q)
  pvid VLAN 200
  participation of VLAN include 200-201
  VLAN tagging 201
  IP mtu 1500
  output

  interface 0/12
  VLAN 201 votes
  policy - PolicyVoiceVLAN
  bandwidth 100000
  pvid VLAN 200
  participation of VLAN include 200-201
  VLAN tagging 201
  IP mtu 1500
  output

  interface 0/13
  VLAN 201 votes
  policy - PolicyVoiceVLAN
  -Other - or ITU (q)
  bandwidth 100000
  pvid VLAN 200
  VLAN automatic participation 1
  participation of VLAN include 200-201
  VLAN tagging 201
  IP mtu 1500
  output

  interface 0/14
  VLAN 201 votes
  policy - PolicyVoiceVLAN
  bandwidth 100000
  pvid VLAN 200
  VLAN automatic participation 1
  participation of VLAN include 200-201
  VLAN tagging 201
  IP mtu 1500
  output

  -Other - or ITU (q)
  interface 0/15
  VLAN 201 votes
  policy - PolicyVoiceVLAN
  bandwidth 100000
  pvid VLAN 200
  VLAN automatic participation 1
  participation of VLAN include 200-201
  VLAN tagging 201
  IP mtu 1500
  output

  interface 0/16
  VLAN 201 votes
  policy - PolicyVoiceVLAN
  bandwidth 100000
  pvid VLAN 202
  VLAN automatic participation 1
  participation of VLAN include 201-202
  VLAN tagging 201
  IP mtu 1500
  output
  -Other - or ITU (q)

  interface 0/17
  VLAN 201 votes
  policy - PolicyVoiceVLAN
  bandwidth 100000
  pvid VLAN 200
  participation of VLAN include 200-201
  VLAN tagging 201
  IP mtu 1500
  output

  interface 0/18
  VLAN 201 votes
  policy - PolicyVoiceVLAN
  bandwidth 100000
  pvid VLAN 203
  participation of VLAN include 200-201 203
  VLAN tagging 201
  IP mtu 1500
  -Other - or ITU (q)
  output

  interface 0/19
  VLAN 201 votes
  policy - PolicyVoiceVLAN
  bandwidth 100000
  pvid VLAN 206
  VLAN automatic participation 1
  participation of VLAN include 201 206
  VLAN tagging 201
  IP mtu 1500
  output

  interface 0/20
  VLAN 201 votes
  policy - PolicyVoiceVLAN
  bandwidth 100000
  pvid VLAN 999
  participation of VLAN include 200-201 204-207 455-456 999
  -Other - or ITU (q)
  VLAN tagging 200-201 204-207 455-456
  IP mtu 1500
  output

  interface 0/21
  VLAN 201 votes
  policy - PolicyVoiceVLAN
  bandwidth 100000
  pvid VLAN 455
  VLAN automatic participation 1
  participation of VLAN include 200-204 455-456
  VLAN tagging 200-204
  IP mtu 1500
  output

  interface 0/22
  VLAN 201 votes
  policy - PolicyVoiceVLAN
  bandwidth 100000
  -Other - or ITU (q)
  switchport mode trunk
  switchport trunk vlan native 456
  pvid VLAN 456
  VLAN automatic participation 1
  participation of VLAN include 200-204 456
  VLAN tagging 200-204
  IP mtu 1500
  output

  interface 0/23
  VLAN 201 votes
  policy - PolicyVoiceVLAN
  bandwidth 100000
  switchport mode trunk
  switchport trunk vlan native 456
  pvid VLAN 456
  participation of VLAN include 200-204 456
  VLAN tagging 200-204
  IP mtu 1500
  output

  -Other - or ITU (q)

  interface 0/24
  bandwidth 100000
  switchport mode trunk
  switchport trunk vlan native 999
  pvid VLAN 999
  participation of VLAN include 200-208 455-456 999
  VLAN tagging 200-207 455-456
  IP mtu 1500
  output

  interface vlan 1
  Routing
  DHCP IP address
  output

  interface vlan 200
  Routing
  -Other - or ITU (q)
  IP 10.253.0.1 255.255.255.0
  output

  interface vlan 201
  Routing
  IP 10.253.1.1 255.255.255.0
  output

  interface vlan 202
  Routing
  IP 10.253.2.1 255.255.255.0
  IP access-group Deny_Guest_Intervlan_Routing vlan 202 in
  output

  interface vlan 203
  Routing
  IP 10.253.3.1 255.255.255.0
  output
  -Other - or ITU (q)

  interface vlan 204
  Routing
  IP 10.253.4.1 255.255.255.0
  output

  interface vlan 205
  Routing
  IP 10.253.5.1 255.255.255.0
  output

  interface vlan 206
  Routing
  IP 10.253.6.1 255.255.255.0
  output

  -Other - or ITU (q)

  interface vlan 207
  Routing
  IP 10.253.7.1 255.255.255.0
  output

  interface vlan 208
  Routing
  IP 10.253.8.1 255.255.255.0
  output

  interface vlan 455
  Routing
  IP 10.253.255.2 255.255.255.0
  output

  interface vlan 456
  -Other - or ITU (q)
  Routing
  IP 10.253.11.1 255.255.255.0
  output

  interface vlan 99
  Routing
  IP 10.253.9.1 255.255.255.0
  output

  IP management vlan 203
  dhcp service
  pool IP dhcp "Telefonie.
  Rental 7 0 0
  Server DNS 8.8.8.8 8.8.4.4
  router by default - 10.253.1.1
  Network 10.253.1.0 255.255.255.0
  domain secit.be
  b-node NetBIOS node type
  output

  -Other - or ITU (q)
  pool IP dhcp "guest."
  Rental 0 12 0
  Server DNS 8.8.8.8 8.8.4.4
  router by default - 10.253.2.1
  Network 10.253.2.0 255.255.255.0
  secit domain name - guest.be
  b-node NetBIOS node type
  output

  pool IP dhcp 'media '.
  Rental 0 12 0
  10.253.3.2 DNS Server 8.8.4.4
  router by default - 10.253.7.1
  Network 10.253.7.0 255.255.255.0
  secit domain name - media.be
  b-node NetBIOS node type
  output

  pool IP dhcp "TD."
  Rental 0 14 0
  10.253.3.2 DNS Server 8.8.4.4
  router by default - 10.253.4.1
  Network 10.253.4.0 255.255.255.0
  -Other - or ITU (q)
  secit domain name - td.be
  b-node NetBIOS node type
  output

  pool IP dhcp "internal."
  Rental 7 0 0
  10.253.3.2 DNS server
  router by default - 10.253.0.1
  Network 10.253.0.0 255.255.255.0
  domain fixitsolutions.local
  b-node NetBIOS node type
  output

  output

  Maybe it's the DHCP packet filtering.

  For help, try to add a rule to allow DHCP packets.

  Example: (this is obviously NOT the exact rule to filter only the DHCP packets, but just a simple rule for the test)

  IP access-list Deny_Guest_Intervlan_Routing
    permit udp 0.0.0.0 255.255.255.255 0.0.0.0 255.255.255.255 eq 67
    permit udp 0.0.0.0 255.255.255.255 0.0.0.0 255.255.255.255 eq 68
  
    deny ip 10.253.2.0 0.0.0.255 10.253.0.0 0.0.255.255
  
    IP 10.253.2.0 allow 0.0.0.255 0.0.0.0 0.0.0.0
  
  output

  If this ACL works (you can get the DHCP address), then you will need to write the ACL right, something like (this is just an example):

  IP access-list Deny_Guest_Intervlan_Routing
    ! DHCPDISCOVER
    permit udp 0.0.0.0 0.0.0.0 eq 68 255.255.255.255 0.0.0.0 eq 67
    ! DHCPOFFER
    0.0.0.0 eq 67 255.255.255.255 0.0.0.0 eq 68
    ! DHCPINFORM
    permit udp 10.253.2.0 0.0.0.255 eq 68 255.255.255.255 0.0.0.0 eq 67
    ! DHCPACK
    0.0.0.0 eq 68
    permit udp 10.253.2.0 0.0.0.255 eq 67 255.255.255.255 0.0.0.0 eq 68
    ! Internal traffic
  
    deny ip 10.253.2.0 0.0.0.255 10.253.0.0 0.0.255.255
    ! Internet traffic
  
    IP 10.253.2.0 allow 0.0.0.255 0.0.0.0 0.0.0.0
  
  output

• The proSafe (JGS524E + GS116E) Switches: Configuration Management Web GUI in VLAN specific

  Hello

  I use a JGS524E and a GS116E. The two are connected via a 802. 1 q uplink with all defined VLANS in him.

  A 802. 1 q other interfaces goes to a pfsense firewall, which serves as a router and dhcp server for each VLAN that I use.

  How can I configure the switches plug are in one VLAN specific and get his IP address of the dhcp server in this VLAN?

  At present, it seems to be random access: it is not predictable that range from intellectual property, it takes its IP configuration via dhcp...

  How management function works internally?

  Thank you

  Markus

  Hello

  Thank you. I tried it out, but the behavior seems to be a little different:

  I configured a static IP address for the switch (10.1.0.13 / 24). I have access to the switch web gui via the ip address of the host of a host directly connected (connected via a trunk port, where I put 1 VLAN on the trunk), but it is all the same, what VLAN that I use:

  When it is connected to the VLAN 1 I have access, but also through 10 VLANS, VLAN 20 and so forth (assumed, I configure my computer appropriate staticly in the IP network, for example 10.1.0.20 / 24). So it seems not be limited only to the VLAN 1. You have access to each vlan, only the IP configuration must be in the same network.

  I'm not sure, how it behaves when cascading the two switches, I have not tried.

  If this information can be useful for other users with the same question about this switching product line.

  For me, this behavior is not very well implemented from my point of view. For security reasons, you must limit access to the administration, for example by allowing access from a specific hardware port or a vlan. With the effective implementation, centralized management for a cascade topology is not easy to set up, perhaps because the behavior is not very clear and not documented in the manuals.

  Mentioned on the edge: there is no available TLS/SSL encryption when accessing the web gui (not https). So the password is transmitted in clear text... not a very good idea, I think.

  Thanks a lot for your help.

  Best regards

  markusd112

• Support vlan missing R6250

  Hi guys,.

  Are there any chance to get r6250 to support the vlan in update close?

  The specifications of this router is excellent, good speed - memory support for usb 3.0 everything is cool. But I miss a lot of support of vlan.

  My fiber optics connection request 10 for ppoe and vlan VLAN 20 for iptv.

  Already tried fw custom (like dd - wrt and tomato that adds vlan) but the performance is not good as the original (usb share and other things) and wifi speed is far away...

  BTW, the source code for the firmware is offline or not available.

  Please add support for vlan ASAP (r6250, v6300 v1 and v2) are missing.

  To date, group VLAN / bridge is now supported on the latest firmware of the R6250.

  Here is the link to the release notes.

• Assignment of VLAN dynamic by using the WC7520 controller

  Hello

  I use a few AP WNDAP360 for awhile and consider adding a WC7520 controller.

  However, I would use an assignment VLAN dynamic using a RADIUS server.

  Whereas it is possible with the 360 in stand-alone mode, it is clear to me if this can be done by using the WC7520 controller.

  The (obsolete?) reference manual said not a Word to this topic...

  Is there someone to share experiences with the 7520 and this type of configuration?

  Hello

  Thanks for your help!

  After reading the articles you suggested, I was still unable to find a definitive answer, so I asked pre-sales support and quickly received the following response from Tech Support level 2:

  There was a feature request to ask to implement, but it looks like it will not be implemented for the WC7520. Also, there is a feature request for the WC7600 which looks more promising, but still not possible currently and is not guaranteed to be implemented.

  In short: no, it is not possible, will not be on the WC7520 and could become so on the WC7600.

  Too bad, and it makes the much less interesting WC7520 for me, but at least it clearly quickly.

• VMware Distributed Switch with VLAN

  Hi again,

  A lot of work with VLAN now.

  But just a quick Questions. Is there a documentation or HowTo Guides how to set up vSphare VMware Distributed Switch with several VLANS on a Switch GS724Tv4?

  

  But soon, I try to add a host or network, it is empty.

  This is probably an easy problem of VMware, but I try here first to see if someone has document guide HowTo so I can start with.

  Thank you

  Christian

  Never mind about this,

  I found the problem on my own, but perhaps a documentation would be great to have. But it's a good start to have the right license of VMware, before you start.

  * I was just out of luck when I thought *.

  / Christian