VM IP not accessible from outside network

Similar Questions

• Two questions - cannot save the printer shares with the error code 0x000006d9 and part of the Machine is not accessible from the network of working groups

  I think this are problems, but here is the separately questions, first of all - the basics:

  4 PC network using the working group with two Windows 7 (ultimate) and two xp.  Everything worked fine with the a previous vista / xp 3 network.  All except the Windows 7 Desktop behave well. The network is connected with a modem cable to a 5XT netscreen NS (firewall hardware to the outside and the inside hub), a netgear wireless access point and Windows workgroup use (as mentioned above).  Name all is correct on all machines, all the discovery settings are in place and each has Norton Internet security for its local protection services. Upgrades of Windows 7 have been computer vista laptop connected wireless and wired desktop previously running XP Professional sp3.  XP conversion was assisted on the desktop of the wizard upgrade Laplink PC Mover.  Applications executed in appearance on the two level computers.

  On the desktop - I can't share printers. When I use "networks and printers" in the start menu to share on a printer I get code 0x000006d9 error saying something like the configuration cannot be saved.  All local jobs printing works well.

  On the desktop - the name of the computer records also of all as on the network (it is discovered and mapped by each PC) but when I try to access it from any other machine I get a general error says something like "check your spelling of the name mannequin." This desktop computer Win 7 can browse shared folders on the network of and write about everything.  Somewhat added data - this device can ping all others in the network sucessfully but none get a ping successfully into the offending machine either with ip address or computer name (times out waiting for a response or said the name is not found).  He himself can ping successfully.  It accesses the internet very high hand.

  Solutions have been attempted without a firewall (Firewall Norton Smart Internet - 2010), with the firewall and various changes to authorization.  A final discovery was that Windows Firewall will not allow because BFE is not able to start - error 5 - access denied (this was discovered by train to allow a possible solution because of some internet chatter that the Windows Firewall must be running to implement shared printers).  All other dependencies are running to get a break on why BFE is not (it turns on the Win 7 laptop as well as the firewall).  Authorizations have been verified in the registry for settings of firewall and BFE (ports, permits, etc.) have also been looked at with a very critical eye.  SFC has been run with no problem.  All ports for net drivers, Win 7 networking and other actions are open in the firewall.

  Then people - I did some internet research and I tried a lot of suggested solutions nothing doesn't.  My apologies in advance if a person provides a solution and I say "tried".  Any help is very appreciated

  You can mark this as resolved problem!
  The program involved, causing this error is firewall Windows, here is what you need to do to fix this...
  If like me you have disabled windows firewall, I use Security Suite of ZoneAlarm, you will need to re-enable the firewall to share the printer.

  If you have disabled or turned off the Windows Firewall. (and in my case this error was caused by exactly that)
  Step #1 - disable any other firewall can be installed. Stop to load at startup and restart your PC.

  Step #2 - go to the tools of Admin folder > Services > Windows Firewall > double click and is it set to manual or automatic and keep it.

  Step #3 - open Control Panel > system & security > Windows Firewall > enable or disable the Windows Firewall > (Enable) turn on the Windows Firewall > save
  Then go to Restore Defaults > click on restore default button > save
  (you only do this IF you have changed the settings of the firewall, but it is always a good idea and will ensure that there are no problems during the proceeding)

  Step #4 - click Control Panel Home > view devices & Printers > Select / click on your printer > screen printer properties > share > share this printer > OK

  Step #5 - go back to firewall Windows and the tower he walks back > save

  Step #6 - go back to Services > and the Manual value Windows Firewall (or turn it off if you want, I recommend the manual)

  Step #7 - reboot and re-enable your firewall preferred to start at startup > Reboot

  Step #8 - take a deep breath and sigh of relief! :)

• IPSec Tunnel upward, but not accessible from local networks

  Hello

  I have an ASA5520 and a Snapgear. The IPSec tunnel is in place and works very well. But I am not able to access the local LAN on both sides. Here are a few setups:

  SH crypt isakmp his

  Active SA: 1
Rekey SA: 0 (A tunnel will report 1 Active and 1 Rekey SA during rekey)
Total IKE SA: 1

1   IKE Peer: 10.10.10.2
Type    : L2L             Role    : responder
Rekey   : no              State   : AM_ACTIVE

  Crypto/isakmp:

  crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto map IPSECTEST_map0 1 match address IPSECTEST_cryptomap
crypto map IPSECTEST_map0 1 set peer 10.10.10.2
crypto map IPSECTEST_map0 1 set transform-set ESP-3DES-SHA
crypto map IPSECTEST_map0 1 set nat-t-disable
crypto map IPSECTEST_map0 1 set phase1-mode aggressive
crypto map IPSECTEST_map0 interface IPSECTEST
crypto isakmp enable outside
crypto isakmp enable IPSECTEST
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 3600

  Route SH:

  C    172.16.3.0 255.255.255.0 is directly connected, VLAN10
C    10.10.10.0 255.255.255.0 is directly connected, IPSECTEST
C    192.168.112.0 255.255.254.0 is directly connected, inside

  access-list:

  IPSECTEST_cryptomap list extended access allowed object-group DM_INLINE_PROTOCOL_1 172.16.3.0 255.255.255.0 object 172.20.20.0

  and here's the scenario:

  

  If I make a ping of the asa to the Remote LAN, I got this:

  ciscoasa (config) # ping 172.20.20.1
  Type to abort escape sequence.
  Send 5, echoes ICMP 100 bytes to 10.172.20.20.1, wait time is 2 seconds:
  No route to the host 172.20.20.1

  Success rate is 0% (0/1)

  No idea what I lack?

  Here's how to set up NAT ASA 8.3 exemption:

  network object obj - 172.16.3.0
  172.16.3.0 subnet 255.255.255.0

  network object obj - 172.20.20.0
  172.20.20.0 subnet 255.255.255.0

  NAT (inside, outside) source static obj - 172.16.3.0 obj - 172.16.3.0 destination static obj - 172.20.20.0 obj - 172.20.20.0

  Here's how it looks to the ASA 8.2 and below:

  Inside_nat0_outbound to access extended list ip 172.16.3.0 allow 255.255.255.0 172.20.20.0 255.255.255.0
  NAT (inside) 0-list of access Inside_nat0_outbound

• RND4210 ReadyNAS 'your NETGEAR storage space is not accessible from this computer... »

  Hi all

  First time poster here.

  My uncle died in November and he had this NAS device in his office. On the back it says RND4210 ReadyNAS but do not know what version or model or something else.

  I got to download RAIDar, but now I have done that and it detects that the NAS very well on my network, it comes up with the following message appears:

  "Your NETGEAR storage space is not accessible from this computer. Please check your network settings. »

  Any help would be appreciated.

  Everything is now resolved.

  Although it is on the same network, it took my PC to also have a wired connection. I moved closer to my hub and plugged here rather than steal my PC ethernet and putting my PC into a Wi - Fi.

• Capsule of the airport is not accessible from the internet

  Capsule of the airport is not accessible from the internet

  He could be reached at any time and has now stopped working?

  How have you tried?

  Three common methods... that you use?

  Airport drive - remote (3 methods)

• FOJ 8500 909 g will not fully install, not accessible from the computers in home wireless network

  I bought an Officejet Pro 8500 909 g which worked well on our home network for 18 months.  Desktop is 32-bit Windows 7 with a USB cable.  Two wireless devices are 64-bit Windows 7.  Printer suddenly has not recognized the cartridges and frozen with the message "problem with the ink cartridge.  Called HP (unassisted) and tech support of holders of the contract of service - without help.  They sent a refurbished (even) model which I can't install on USB or wireless connection completely.  Yesterday, I was able to print at least one 3 machines on the network (not every machine wireless).  Today, I can not print even the USB device.  5 days lost uninstall then reinstall the printer software, router, etc.  Connected wireless network.  Printer says it is on the wireless network.  HP Solution center is not accessible because the "printer is not completely installed. Help?

  Hi EWQuince,

  The information you have given it seems that the printer is not on the same network as the computer. If the printer was on the same network as the computer, the IP address would be 192.168.1 instead of 192.168.33. You must run the printer Wireless Setup Wizard and make sure that you connect it to a network, the computers are connected. Once you have the printer connected to the same network all your problems should be solved.

  To connect to the wireless network

   

• vmware site is not accessible from other hosts

  The host is Windows 7, and the guest is CentOS. I managed to put in

  openSSH and apache on the rise and the site is visible to the host, but I can't

  access it from outside my LAN (I have a router) or inside my local network (since one

  another computer of course). How to configure Vmware & window7 then I have

  can access my virtual server on the internet?

  If you did what I said in my reply to you the other day this subject, you should be able to access by other computers on your local network, but not in itself for WAN connections and you will need to set up your router correctly to enable connectivity on the Internet virtual computer.

  You did as I suggested and read Chapter 14 you have a knowledge of virtual networks and then bridged Network Adapter to the virtual machine value and disable auto fill in the virtual network Editor?

  If this is not the case, go back and read: Re: vmware is accessible from the host machine, but not on other computers

  BTW, in the future do not start a second thread for discussion of the matter.

• Windows Vista Home Edition not accessible PC in network

  Hello

  I have Windows Vista Home edition installed on a PC. I shared a few folders on the network. I gave all security and permission to everyone to read and share share the contents of the folder.

  But when someone from the network wishes to access a shared folder on this computer by writing (\\abc-PC) in the Run dialog box, system gives an error "network path was not found".

  I disabled the firewall and anti-virus to this PC.

  Network is configured by a network of professionals expert. So no question of network.

  Some people said that this is a limitation of Vista Home, but I do not.

  Please help me.

  Thanks in advance.

  Thanks Krish

  Hi Krish,

  Work on a domain network?

  Make sure that the computer is turned on and that you have enabled file sharing and printers on your network

  Follow the steps mentioned in the link below

  Solve the problems - and printer-sharing files

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-and-printer-sharing

  Make sure network discovery is on

  1. open the network and sharing Center by clicking the Start button, clicking Control Panel, clicking Network and Internet, and then click Network and sharing Center.

  2. If network discovery is off, click the arrow to expand the section, click turn on network discovery, and then click on apply.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, see the link below

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/Networking-home-computers-running-different-versions-of-Windows

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• (writable) storage space that is not accessible from the BB or via the desktop file Explorer to

  Hello

  I have a html file that are uploaded after the application starts. I would use the browserfield to view these html pages.

  Help I need is;

  • Is there an internal writable directory where I can store my html files and access it from browserfield, at the same time, it should not be accessible from the file Explorer.
  • How to read the files here using fileconnection
  • What should I write in browserField.requestContent("???");

  Html files must be not accessible because they have some logic that I do not want to expose to the end user.

  Many thanks in advance,

  Godwin

  BB OS is much older. If you want to work with the use of the modern system of BB10

  as I said, if you need files in writing you will need to use encryption.

• Local database not accessible from the console of the enterprize Manager

  Hi all.. I have a strange problem, please help
  
  I have installed hv oracle 9i on my pc. It is related to a db server and a local database (for scott schema) is also installed on the pc. with console of oracle enterprise manager, I was and want to access the two databasses. (db server and local)
  I can access the database server of db as sys: attributes are...
  
  Host: 10.4.34.59
  Port: 1526
  SID: grid59
  
  attributes for local db
  ---------------------
  Host: e5687g7665
  Port: 1523
  SID: ora123
  
  the two dbs are accessible from sql plus, but when I write scott, tiger on the console, it says 'no listener'... on the net manager oracle I HAV already added the address for pc local db.
  Thanks in advance, please help

  Hello
  It's very strange, using tnsping you get the listener, so I don't understand why sqlplus returns 'no listener '.
  You have run the tnsping and sqlplus from the same computer and same ORACLE_HOME, right?
  You have several installed Oracle customers?

  Liron Amitzi
  Consultant senior s/n
  [www.dbsnaps.com]
  [www.orbiumsoftware.com]

• New virtual local network not accessible from the vpn

  Cisco ASA 5510 helps static routes.  I created a new vlan internal and added the path correct for the ASA.  Internally the vlan is fully accessible, but when I connect to the VPN I can't communicate with the systems in this regard.

  The access policy dynamics and associated ACLs are fine. A system related to this policy, but not on the new VLAN is accessible through this policy.

  What Miss me?

  Hello

  Please let us know what kind of tunnel are you talking about:

  1 lan to lan tunnel

  2. site of tunnel site

  You must ensure that the new VLAN is part of the interesting traffic and nat is free.

  Add the new vlan interesting traffic will ensure that the tunnel is trigged for the new VLAN.

  Do the new vlan a part of nat exemption ensures that traffic is through the tunnel and natted not routed to internet and so lost.

  Also you can check if the program and for the tunnel decaps multiply or not when you try to move traffic from the new VLAN. You can check which form the "sh cry counterpart his ips."

  I hope this helps.

  Kind regards

  Anisha

  P.S.: Please mark this thread as answered, if you feel that your query is resolved. Note the useful messages.

• Homepage not accessible from remote computers

  Hello
  I just installed version 10g 2 x, but I am not able to access XE home page of other computers on my network even though I configured XE that this is possible.
  
  I'm under Oracle_Server_Linux 5,6.
  I accepted all the default values during the installation of XE.
  Using Firefox, I've traveled to http://127.0.0.1:8080 / apex
  
  Then I sailed in the homepage of/home/administration/Manage_HTTP_Access
  and selected "access: Available_from_local_server_and_remote_clients.
  and then you click on Apply_Changes, which seemed to complete successfully.
  
  The help of the host on which the XE is installed, I am able to use Firefox to access http://192.168.0.102:8080 / apex from which I expected to find, and that works fine. But when I try this from a remote computer, the connection fails.
  
  I'm sure the network itself works because ping and ssh work between computers.
  
  Someone has ideas on how diagnose and fix this probem?
  
  Thanks, Tcharles.

  When he works to the host, but not remotely, a likely culprit is your firewall.

  The port of the Apex and the database listening port, if you also want the remote database connections, must be added to your firewall exceptions list.

  A quick check to see if the port is blocked, try a telnet to the host and port.

  $ telnet 192.168.0.2 8080
  ...
  $ telnet 192.168.0.2 1521
  ...
  

  And to be sure that the correct port is in use, check with a "lsnrctl status", you should see an entry for endpoint listens for http and ip address and port number as well.

• How can I update iPhoto if it is not accessible from the UK store

  When I run the iPhoto application it tells me that it won't start unless I update to the latest version of the App Store. When I click on 'Upgrade' it tells me that it is not available on the App Store of UK. Has anyone found a way around this?

  Thank you.

  If you have previously bought iPhoto, it should be in your list of purchases made on the App Store. If you do not see, it may be under hidden purchases. You can try to download it from there.

  If you have not deleted your hard drive during the upgrade to OS X 10.10.3, iPhoto can be in your Applications folder.

  Also check this thread (see response to Terence Devlin) cannot be updated iPhoto 9.6 to 9.6.1 after 10.10.3 day!

• WAG320N FTP server not accessible from the internet.

  I had a problem with my WAG320N for quite awhile.

  I add a hard drive 1, 5 TB usb port and I can access to the LAN.

  Now I want to take a step further and be able to access it from the outside.

  I enabled the FTP server and Internet access.

  I was play within the parameters of safety etc. but with no luck

  Why you changed the ip address of the router to 192.168.1.2. ?

  Try to update firmware of the router. After upgrading the firmware, reset the router and re - configure from scratch. Now, simply activate the FTP server on the router and check.

• Computer laptop XP does not appear in the network of Vista laptop

  My cell phone based on Windows-XP does not appear in my laptop Windows Vista-base and is not accessible from this Vista computer, but it appears in the network adapter connected to the network wireless by a double dashed line. At the same time, the laptop Vista appears in computers on the XP network and is accessible from there. I have already applied Windows XP - SP3 hotfix KB 922120 to XP laptop and checked the firewall on both machines (Exceptions) settings, and they seemed OK. Also, I checked the HKML restrictanonymous DWORD value data value data (0) of the XP machine.

  Can someone help me with this? Thank you so much in advance.

  Hello
  Maybe this can help.

  To get best results connect to each computer system screen and set all the computers to be on a bearing the same name of Working Group , while each computer has its ownunique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

  -----------

  If more control is needed to take a look at this page http://windows.microsoft.com/en-US/windows-vista/Share-files-and-folders-over-the-network-from-Windows-Vista-Inside-Out

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET