VMware 5.5 u1 - iScsi adapter hangs the system

Similar Questions

• The card using PCI-GPIB hangs the system (Windows 7)

  Hello

  I am running Labview 11.0 (32-bit) on Windows 7 (64-bit) computer and card PCI-GPIB to communicate with instruments.

  Can I use GPIB to send commands to the device, but when I used "Measure and Automation" and analysis of the instruments he runs right first time, but if I scan again the system crashes completely (no reaction to any seizure).

  Same thing happens if I use I/O Assistant VI, I can get a response from the instrument and on the second call, the system hangs. Yet, I can send as many orders without any problem, so the source is in the reading stage.

  The PCI-GPIB card worked perfectly well for years on another computer running Windows XP.

  Someone already had this problem and what can be the source of it?

  I had a similar problem, but I just found out that the motherboard was not good...

  Try in another computer... Optionally, you can uninstall and install back the NI 488 drivers. 2...

  -Germain

• Bluetooth icon tray disappears after turning off the USB bluetooth adapter in the system tray

  You seem to have a problem with your bluetooth icon. If you cannot match something you can try to remove the device and then put it back. I tried it didn't work. Then, you may need to disable bluetooth adapter on the icon. But if you do that you cannot turn it back on because the bluetooth icon status bar disappears when the adapter is disabled. Also it does not appear in "peripheral" that the adapter is turned off. You must go to the C:\Program WIDCOMM software and double-click BTTray.exe to redisplay the icon, and then turn on the adapter. Come on Microsoft, surely it would be easier to just gray exit icon at its stop, then your right click the greyed to activate the adapter turn it back on. Simple really.

  Follow this link: http://social.technet.microsoft.com/forums/en-US/itprovistanetworking/thread/b09708cd-6c63-4073-b27f-f853aa5a5dc0/

• Not enough memory RAM for EDU-ICM-1301 - VMware - SAMPLE Training Services - on request in the system class: vSphere install, configure, manage course 5.5

  Hello

  I'm looking for the laboratory "EDU-ICM-1301 - VMware education Services - SAMPLE - in class on request: vSphere install, configure, manage course 5.5" but trying to follow the instructions

  LabFiles\vCenter GA Installer

  3. Double-click autorun.exe , click run.
  4. If the security warning dialog boxes appear, click run to continue.

  the installation does not work with because the memory is not enough.

  Have you ever tried this workshop?

  You have a solution for this problem?

  Thank you

  Hello

  Yes we have seen several times.

  The simple solution is to install ONLY the Client vSphere and not all vCenter Server.  Specified in the manual, but it is up to the user that installation of the client is the option left on the halfway point in the Setup user interface.

  Thank you.

• Unavailable WebGL, recommends updating the graphics driver, but try and graphics driver udated hangs the system. Now what? Works fine but on Google Chrome.

  WebGL demos do not work.
  "On the help/troubleshooting information", he says:
  "WebGL Renderer (WebGL unavailable)"

  He suggested upgrading my driver to the ' version 257.21 or newer. I tried the latest driver from NVidia, but it blocks my system.

  Chrome works well even if (for example

  Sorry to hear that the new driver crashes your system, but it's the problem to be solved here. Try reporting it to your manufacturer of computers or NVIDIA.

  For what it's worth, next version of Google Chrome passed our list rule and now is as demanding as NVIDIA 257.21 or newer:
  http://src.chromium.org/viewvc/chrome/trunk/src/chrome/browser/resources/software_rendering_list.JSON

• Scanner plugins CS6 audition freezes or hangs the system

  It seems that whenever I try to scan for VST effects, Adobe Audition crashes at 0% or freezes my system in 6500 + loading process using 100% of my memory (16 GB).

  Accordingly, there are no plugins.

  I tried these solutions:

  • Mobile VST folder to another drive and scan it there
  • Attempt to analysis of a folder empty
  • Update to the latest version of the hearing (problem existed before and after the huge Adobe update)
  • Tried to have only some, guaranteed to work the plugins in the folder
  • Hearing running as a system administrator and by ensuring that this folder are read-

  However, the result is always the same: no slowdown system or the progress leading to the accident.

  My system is Win7 64-bit.

  Is there a solution or at least a theory that could be the problem?

  Try to Audition for the release of your firewall. I gave him full access to the Internet and it worked for me XD

  Prior to that hearing could not scan at all the plugins. It crashed / frozen or stuck at 0% when I tried to scan.

  I hope that helps!

• How to add the software iSCSI adapter in vSphere, ESXi 5.0?

  Hello

  Please give me the steps to add the software iSCSI adapter in vSphere, ESXi 5.0.

  Thank you.

  Hello

  In an earlier version of VMware ESXi software iSCSI adapter was included in the list of the storage card, but is not in the case of VMware ESXi 5.0. In ESXi 5.0 iSCSI adapters are not listed by default and must be activated first before we go away from configuration.

  How to add iSCSI adapter in ESXi 5 check the link below

  http://www.google.co.in/#sclient=psy&hl=en&source=hp&q=How+to+add+Software+iSCSI+Adaptor+in+vSphere+ESXi+5.0+Site%3A+blog.srinfotec.com&pbx=1&oq=How+to+add+Software+iSCSI+Adaptor+in+vSphere+ESXi+5.0+Site:+blog.srinfotec.com&aq=f&aqi=&aql=&gs_sm=e&gs_upl=9181l21561l0l21875l33l30l4l0l0l0l736l10898l3-8.7.7.1l23l0&bav=on.2,or.r_gc.r_pw.&fp=1ad7a99e02298f12&biw=1366&bih=647

  or

  http://blog.srinfotec.com/?p=178

  concerning

  Rohit

• Computer hangs when you insert the adapter into the power outlet

  my computer working properly, when I plug the adapter to the power outlet the screen freezes no key work. What can I do? Please help me. I buy the new adapter "nt also works. my computer is toshiba is my Windows vista Home premium

  Hello
   

  The question you posted would be better suited in the Toshiba forums. View the query in the Toshiba forums for assistance.

  http://forums.Toshiba.com/T5/computers/CT-p/c_laptops

  Also get in touch with the manufacturer and get the material under test.

  Hope that helps.

• High resolution monitor and VMware Workstation, causing the system to hang

  I usually like VMware / WS... I used VMware / WS for many years with problems little / not serious - until recently.

  I'm under WS 6.5.1 on MS/Windows/XP/Pro/SP2 (host), and 2 guests of virtual machines: RHEL4 and MS/Windows/XP/PRO.

  Recently I bought a SAMSUNG T260 (1920 x 1200) high-resolution screen - I really like (I also used SAMSUNG monitors for many years with little / no serious problems).

  Currently, I am frequently (several times a day) see the two VMware / WS (all guests) and my XP any host COMPLETELY FREEZES up.  The only way out of this is perhaps a shutoff of the system and then restart.

  Needless to say it is (IMHO) a OFF THE CHARTS SERIOUS PROBLEM... with all fingers pointing to VMware / WS (TBD).

  Previously, I was running on a HP low resolution screen 1280 x 1024.  I can run for days/months/still without seeing the problem above.

  Also, I believe many/most/all lower resolution monitors is likely no other problems (be it).

  This is a 'system to freeze the scenario:

  1 pass to MS/Win/XP vm host RHEL (mode full-screen)

  2. press quickly on full screen non-plein screen

  3. If I do the above too fast my entire army system freezes up.

  Any body else see something like that?  Any ideas/help/suggestions will be appreciated.

  Mark

  PS/BTW - I've seen this problem originally under 6.0.3

  Are you running the latest drivers for your videocard host?  Video drivers are complex enough that they almost always end up containing pretty serious bugs and VMware video cards use is broad enough for us fires frequently these questions.  If upgrading the drivers didn't help not can you let us know:

  -What graphics card and cpu type is your host machine?

  -Don't you update of tools in two virtual machines?

  -What is your workload, particularly in the XP VM?

  -3D acceleration enabled in the XP VM is?

• software offline iSCSI adapter

  Dear community,

  I've implemented the following:

  ESXi host running VMware ESXi, 6.0.0 2809209

  VCSA device running 6.0.0

  I can't get my online iscsi adapter, as you see in the photo the adapter shows offline status adater and activate in the status of card details.

  I tried everything I could as the withdrawal/re-enabling but nothing works.

  Does anyone has an idea on how to solve this problem?

  Thank you

  Da

  OK, problem solved immediately after applying the update patch 1 for exi 6.0.0

  Thank you

  Da

• Powercli editable iscsi adapter logintimout?

  HI - is it possible to change the value of an adapter logintimeout software iscsi (iscsi adapter | properties: Advanced: logintimeout) via powercli?  We use a powercli script to run a new analysis of the adapters of iscsi on all our guests a at a time as needed.  Recommended by our SAN provider recommends that we put logintimeout to 60 seconds, but that the fact for 15-20 minutes for each host rescan.  Affecting the logintimeout value 5 seconds, temporarily, to analyze it again reduced the time to analyze again in 2-3 minutes per host, so I would include changing the logintimeout value in our script, but have not been able to find a way to do.  Thanks in advance for any ideas you may have.

  Hello, Kyle Powell-

  As with most everything that begins, «Can PowerCLI...» ', the answer here is, "can of course.  I didn't see a cmdlet 'standard' who will take care of this, so it's time for favorite of all, Get-view!  Something like:

  ## make the array of options to update on the ISCSI adapters$arrISCSIOptions = New-Object VMware.Vim.HostInternetScsiHbaParamValue[] (1)$arrISCSIOptions[0] = New-Object VMware.Vim.HostInternetScsiHbaParamValue -Property @{    key = "LoginTimeout"    value = 5} ## end new-object
  
  ## get all hostsystems, along with a few, choice propertiesGet-View -ViewType HostSystem -Property Name,ConfigManager.StorageSystem,Config.StorageDevice.HostBusAdapter | %{    ## get the HostStorageSystem for this hostsystem    $viewThisHostStorageSystem = Get-View -Id $_.ConfigManager.StorageSystem    ## for each ISCSI adapter in this host, update the InternetScsiAdvancedOptions    $_.Config.StorageDevice.HostBusAdapter | ?{$_ -is [VMware.Vim.HostInternetScsiHba]} | %{        ## reference:  http://pubs.vmware.com/vsphere-50/index.jsp#com.vmware.wssdk.apiref.doc_50/vim.host.StorageSystem.html#updateInternetScsiAdvancedOptions        $viewThisHostStorageSystem.UpdateInternetScsiAdvancedOptions($_.Device, $null, $arrISCSIOptions)    } ## end foreach-object} ## end foreach-object
  

  Thanks to Onyx for the bit of the method to use here, "UpdateInternetScsiAdvancedOptions()".  And, you can set the scope of these actions of config by getting fewer hosts, or less HBA per host, etc.

  In any case, what to do for you?

• promotion of iSCSI LUN with the VMFS data store

  Hello

  I moved an iSCSI on the website of DR SAN and fact volume so that it was accessible to the ESX host on the site of DR based on the IP address and made the new analysis of the adapter for iSCSI Software in the VI Client on the two hosts on the DR site and he discovered the LUN.

  I don't want to go to the Configuration, storage and add storage as this reformatted the volume and it has a VMware Server already on it running happily on the main site.

  How can I add the volume as a VMFS data store available on the two hosts as he is picked up automatically?

  Thank you

  Paul

  I guess it was a VMFS volume that was used by the ESX environment on main site you, Yes? If you have moved the LUN, i.e. the ESX hosts in the main site no longer have access so that the ESX host at the DR site do not have access, you will need to define EnableResignature = 1 under Advanced settings, LVM

  You restart the analysis for storage and you should access your VMFS volume. You will need to register your virtual machines with the new host.

  When complete set EnableResignature = 0

• How can I type of NETWORK adapter in the virtual computer a vCloud?

  I'm trying to write a script that compares the type of NETWORK card in vCloud NIC type in vCenter to work around a bug in vCloud 1.5.  I can get the type of NETWORK adapter in the virtual computer a vCenter by getting the vCenter VM up and running:

  
  

  $vcvm | Get-NetworkAdapter | FT-auto
  Name Type NetworkName MacAddress WakeOnLanEnabled
  ----              ----           ----------- ----------        ----------------
  Network adapter 1 isolated EnhancedVmxnet 00:50:56:01:00:33 True

  
  

  I do not get the same results when you perform an action similar to vCloud:
  $vcdvm | Get-CINetworkAdapter
  
  
  Connected primary index IPAddressAllocation IPAddress ExternalIPAddress VM
  ----- ------- ---------  ------------------- ---------       ----------------- --
  0 true true manual 192.168.10.30 nic1
  
  
  I can get all the other info NIC, such as the network, IP, MAC, etc, but not the type:
  ($vcdvm. ExtensionData.section) [2] .networkconnection
  
  
  Network: isolated
  NeedsCustomization: false
  NetworkConnectionIndex: 0
  IP address: 192.168.10.30
  ExternalIpAddress:
  IsConnected: true
  MACAddress: 00:50:56:01:00:33
  IpAddressAllocationMode: MANUAL
  Get_anyattr:
  VCloudExtension:

  For the moment, I get the type of NIC the vCloud himself database vCloud.  Thanks for any help.

  I use VMware vSphere PowerCLI 5.1 Release 1 build 793510

  I could tell you where to find it, but there is a bug in the API that shows only as PCNET32 anyway (sleep if she could be VMXNET3). Keep doing what you're doing with the database query.

  See you soon,.

  Jake

• Hardware iSCSI adapter connection problems

  HP DL385 G7 with 2 HP (Broadcom) NC550SFP Dual Port 10 GB adapters. ESXi 4.1 U2

  You try to bind material load NC550 adapters to the good network card.  When I list of the HBA association and the NIC.

  esxcli - list of server servername swiscsi vmnic vmhba d #.

  It displays the physical NETWORK card bad example vmnic0 which is a 1 GB card NETWORK configured as the VM network and network management

  I had previously assigned iSCSI Software for the two vmnic adapter in the NC550SFPs.  However when I list the cards for the iSCSI HBA software, it lists each NIC in the system.

  Tried to simply bind the correct physical NIC to the iSCSI HBA hardware

  esxcli - add a server servername swiscsi nic - n vmkx d vmhba #.

  where vmkx is the physical NIC for the NC550 and the vmhba # is the HBA for the NC550

  and it failed with: failed to add a network card

  Attempted to delete the incorrect association

  esxcli - server servername swiscsi nic remove - n vmkx d vmhba #.

  where vmkx is the nic which was displayed in the list for hba named vmhba #.

  and he returned: NIC is not bound

  Do not know where to go next...

  Hello

  In addition my property would be to disable the iscsi Software initiator - you want to use only the hardware iscsi adapters, don't you.

  Mixing software and hw adapter is not recommended method here, as far as I know.

  Reg

  Christian

• How to associate a VM for the second network adapter on the host

  Hello

  I have created a virtual machine and added a NIC that matches the first physical network adapter on the host Machine. I then added a second NETWORK adapter on the host. I would like to create the second network adapter on the same VM and map it on the second NETWORK adapter on the host. How can this be achieved.

  When I use the "Add Hardware", I does not enumerate the physical network adapters on the host to choose and assigns a VM mac address.

  Kind regards.

  VMware customers use virtual network adapters if you need for a great, a second deck on the host card, but how to do this depends on the host OS.

  For Linux, just run vmware - config.pl and choose to create a second bridged network adapter, choose the right pair of physics.

  For Windows, run vmnetcfg.exe (as an administrator), disable the automatic bypass and then manually fill the two physical network adapters (for example to create two VMnet adapters * with each mapping to a different physical NIC). You also need to restart the host VMware Agent services and VMware Server Web Access before these virtual cards will be available for use.

  Chapter 11 of the guide is a good reference for all this - http://www.vmware.com/pdf/vmserver2.pdf

  Guy Leech

  VMware vExpert 2009

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.