Computer hangs when you insert the adapter into the power outlet

Similar Questions

• The computer hangs when you use the DVD player

  Whenever I am playing a DVD, any DVD playing software that I use (Windows Media Player, Real Player, PowerDVD), the DVD plays fine until I move my mouse... then the computer freezes immediately. CTRL + ALT + DEL doesn't work. I have to use the power button to turn off the computer.

  I updated the DVD drive device driver; still crashes.

  I have a Dell Optiplex GX 280

  Windows XP SP3

  DVD is a teac dvd + rw dv-w58e

  
  

• Computer hangs when you try to watch live TV through windows media centre__

  Computer hangs when you try to watch live TV via windows media Center
   
   
   
  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 3081
  More information about the problem:
  BCCode: a
  BCP1: FFFFFA600C193FF8
  BCP2: 0000000000000002
  BCP3: 0000000000000001
  BCP4: FFFFF8000233499E
  OS version: 6_0_6001
  Service Pack: 1_0
  Product: 768_1
  Files helping to describe the problem:
  C:\Windows\Minidump\Mini112509-01.dmp
  C:\Users\user\AppData\Local\Temp\WER-132569-0.SysData.XML
  C:\Users\user\AppData\Local\Temp\WERCC53.tmp.version.txt
  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409
  

  Hi Eddie Hunt

  Welcome to the Microsoft Answers Forum!

  I suggest you try this method and check if it is helpful

  Method 1:

  Start your computer in a clean boot and check what third-party software or program is at the origin of the problem. To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to run check and clean boot if you have the problem.

  i. Click Start, type msconfig in the search box and press ENTER.

  II. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  III. in the general tab, click Selective startup.

  IV. under Selective startup, clear the check box load startup items.

  v. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  VI. click OK.

  VII. When you are prompted, click on restart.

  VIII. after the computer starts, check if the problem is resolved.

  If the problem is solved, check what third-party software or program is at the origin of the problem, referring to the link given below:

  Clean boot

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  i. Click Start, type msconfig.exe in the start search box and press ENTER.

  II. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  III. on the general tab, click the Normal startup option and then click OK.

  IV. When you are prompted to restart the computer, click on restart.

  Method 2:

  Install the latest codec package and check if that helps, link below will help you with the same:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=06fcaab7-DCC9-466B-b0c4-04db144bb601&displaylang=en

  Method 3:

  Update the graphics card. Steps to update the graphics card:

  i. click on start, type devmgmt.msc and then on enter.

  II. develop the graphics card and right click on the sub element and click on update driver.

  Link for reference: problems with watching TV on your computer

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• system gets hanged when I insert the cd in the drive

  MY SYSTEM GETS HANGED WHEN I INSERT THE DVD WHICH CONSISTS OF GAMES. MY SYSTEM BECOMES VERY SLOW AND GET STUCK BETWEEN CERTAIN PROCESSES.

  Hello

  ·         Did you make any changes before the show?

  ·         It happens with all CD/DVD or is it limited to the CD/DVD set you mentioned?

  I suggest that you run the fixit from the link below and if it helps:

  Your CD or DVD drive cannot read or write media

• Why Satellite Pro A300 does not start when you press the power button?

  Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

  In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
  Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

  What should I do to get a normal departure procedure?

  When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

  When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
  The same thing happen on my Satellite A300.

• PowerEdge T410 won't do anything when you press the power button / stop.

  My work has recently retired this t410 server. It worked without any problems when he was arrested. I had to remove and destroy the hard drives from the system. After that, I was allowed to bring home for my own use. I installed a new sata drive and plugged into the power supply and a free sata port on the motherboard. I get nothing when I tried to boot the system. This version has the unique power. Power light only lights up when you press the test button. System fan is going at full speed, but stops when you release the power button. Also on the control panel lights 1,2 and 4 and HDD power on and turn until the test button is released. There is a single green light lit on the motherboard, while it is plugged. Apart from that, I have no response when you press the main power button. Can anyone tell how to try to get it up and running again.

  -Who-

  I have not received the answers more so I think that this issue is ignored. So I'll let everyone know what finally happened. I solved my problem after a lot of electrical testing. I found a diagram of the arrangement of the power dell power supply pins and I made myself the best possible meter test. After several rounds of tests, I found several pins that did not have the right voltage. I bought a new power supply. I installed and replace everything. I plugged into the system and it auto fed on itself. I loaded from an OS and it works perfectly.

  Problem solved

• Have HP Pavilion dv2500, won, t turn on. When you connect the power supply blinks blue.

  Have HP Pavilion laptop dv2500, p/n kn997ua #aba, does not illuminate. When you connect the power supply blinks blue.

  Now you can take the laptop at best buy or Wal-Mart and get them to plug a power cord. This will give you an idea if you need to buy a power cord or not.

  Again, you can always buy the power supply cord and if it does not return.

  THX

• images dialog box is empty when you insert the memory card

  This is after you have inserted a card high capacity in the player, which hung the memory slot.  Now just insert a regular memory card, the dialog box appears, but there is nothing in it.

  Sorry if the info seems confused but maybe the
  answer is here somewhere.

  FWIW... There used a similar problem with a Sony memory
  Stick... the solution is to insert the stick into the drive and
  Restart the computer... somehow this would reset the
  stick.  I don't know if it will work for you.

  You may also check your AutoPlay settings...
  If you insert the card and go to... Start / my computer...
  and right-click on the drive letter for the location of in the map is...
  choose... Properties / AutoPlay tab...

  Choose... Mixed content...
  Tick... Select an action to perform
  On the left, click on the default button / apply / OK.

  Give it a try...

  It is possible that your media player is not compatible
  with the SDHC technology. The best is maybe to buy
  an external drive that is compatible SDHC or download
  Unit photo using a USB cable.

  Regarding the card... have regular SD, you tried to manually
  Download the pictures?

  If you connect the device to your PC via a USB cable, turn
  on the camera... then go to... Start / my computer... it may be
  listed as a drive letter...

  If_yes_right click on the drive letter and select... Explorer or
  Open... This should display the directory of the memory card.
  You can copy and paste or drag and drop the files from there to a
  folder on your hard drive.

  (The same steps work if you have a media player...
  When you go to... Start / computer... the media slots
  Drive should be listed under... "Removable disk" with a drive
  letter.)

  Finally... the AutoPlay Repair Wizard can be worth a try:

  Microsoft Autoplay Repair Wizard
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=c680a7b6-e8fa-45C4-A171-1b389cfacdad

• "this file does not have a program associated with it" message when you insert the sd card

  When I insert an SD card into my computer, I get a message that says f:\ that this file does not have a program associated with it... I know I can set default programs with the types of files in the Control Panel, but how do you recognize what to do when I insert an SD card in the computer?

  Windows 7
  The problem is caused by the automatic game changing options, this can sometimes happen when you install a new program, but they can easily be changed back. Click 'start' at the bottom left, go into "default programs" on the right side of the list (under computer / doc/images etc.) select "Change AutoPlay settings.
  You will find prob some of the sections had the new auto run program, just edit those you want (or all) "ask me every time", you will find that when you insert an sd card, you get the options normal download, copy, etc. as usual.

• Blue screen when you insert the DVD - M40X

  Hello
  I have a new computer laptop toshiba satellite M40x-183. (with DVD super multi)
  After ten days of buying it, I found a problem when playing some DVD and CD, when I insert the dvd I got a blue screen saying... There is an error and windows can stop harmful to your pc and I have to contact the support then start dumping from 100% to 0%...
  I have tried the dvd in many other dvd players and it works perfectly. Team support here told me that this type of dvd player are unable to process this format how it happens so that older toshiba and other laptop brands can do!
  Is there a solution to this?

  Hello

  Well, as the support service team say that the DVD player is not able to read this format.
  But I can't give you a good answer why it s not possible to play this DVD. It s a simple fact that there are many DVD and CD formats on the market and number of readers is not able to play some formats.
  Have you tried to play burn DVDs? I recommend you to test the DVD from other manufacturers. I use TDKs and it works correctly.

  Good bye

• How can I get rid of the error code 0 x 80010108 when you insert the SD card

  My SD card is good and I can access images using my computer to start up. I can also see my saved photo gallary pictures. What I can't do, is when I insert the SD card and select images I get the above error message. Help.

  I would say that you have two choices,

  Photo Gallery of windows open before inserting the sd card,

  Then click on import, then insert the sd card.

  Or you can click on the Start button and click computer.

  Insert the sd card,

  He appears as a removable disk that you can right click and click Open,

  Then manually, copy and paste the files in a folder or an existing one,

  Do not use auto play close the dialog box or use the Windows Explorer instead.

  Oops, that's three choice :)

• check the trigger quantity - at hand when you insert the order quantity

  Jin
  I have problem with trigger, I use the OE schema
  I have the form master / detail for orders and Order Details, that I need when I insert the order quantity to check the quantity available for each product using the trigger
  I use oracle 10g developer
  any help would be appreciated
  Thank you very much

  2MEO wrote:

  Bamba says:
  What is the structure of your database? and this code that you write?

  don't tell that you don't know how write the SQL query :)

  Thank you for your quick response
  I can write the SQL query
  I use these lines:

  SELECT quantity_on_hand
  INVENTORIES
  WHERE Product_ID =: Product_ID;
  IF: quantity > Quantity_on_hand THEN
  MESSAGE ("the inventory is not enough");
  END IF;

  Why do you think I can't write same SQL query?
  Thank you Bailey

  The query is bad :) there is no INTO clause

  Write it on quantity WHEN-VALIDATE-ITEM and KEY-NEXT-ITEM

   declare
     vquantity number;
  begin
   SELECT quantity_on_hand
    into vquantity
    FROM INVENTORIES
   WHERE Product_ID = :Product_ID;
  
   IF :quantity > vquantity THEN
      MESSAGE ('the inventory is not enough');
       raise form_trigger_failure;
   else
      null; -- or next_item if you are using KEY NEXT ITEM trigger
   END IF;
  
  Exception when no_data_found then
    message('Invalid product ID');
   raise form_trigger_failure;
  END;
  

• Blue screen when you unplug the power of the computer dell laptop XP

  I have a dell latitude E6500... problems with blue screen when I unplug the laptop.  his past about 5 out of 10 times now.  Ive updated all recommended microsoft updates and it is still the case?  is there a driver for xp needed to solve this problem?  It only happens when I unplug the power cord and it happens as soon as I unplug

  Hello suncoastsrq,

  Usually, when we see problems during shutdown, the cause is something that loads at startup.

  To this end, I would recommend mode startup minimum troubleshooting as seen in the following articles:

  http://support.Microsoft.com/kb/310353

  http://support.Microsoft.com/kb/316434

  Please note that after refine us the cause, it is important that we return to a normal startup and manually delete the startup program.

  In addition, if we can get downloaded discharge, the community has access to them and will probably be able to determine the cause.

  You can download the dump Auggy's previous suggestion?

  Let us know.

  Best regards

  Matthew_Ha

• Tecra A4 does not light when you press the power button

  When I press the power on button it turns green for 4/5 seconds then turns off.
  "I do all the tests the support on the page:
  
  * Press on and press and hold the Fn key and press the F5 key repeatedly. If an image appears on the display, this indicates that the image has been activated to a connector for a monitor outside, causing only appear to be off the computer.

  * Connect the adapter to the computer.

  * Remove the battery and unplug the AC adapter and then connect only the AC adapter. Make sure that the power adapter is one that comes with the computer. Try to turn on the computer again, without the battery in the computer.

  * Plug the power adapter into a different plug.

  * The battery, ensure that there are enough energy to start the computer.

  * Press and hold the power switch for 10 seconds (to make sure that the computer is turned off). Wait five seconds, and then tap on and again, hold the switch for three seconds (turn on the computer).

  * Ensure that nothing beats (a sliding plastic cover) in the path by pressing the power switch.

  * Disconnect all devices (printers, pointing devices, keyboards, etc.) connected to one of the ports on the computer.

  * Remove any additional memory, beyond the computer built in memory, or the first module of memory in the computer. If the computer starts correctly, reinsert the memory and turn the computer back on. If it does not start successfully, memory can be inserted incorrectly, it may be defective or the support of memory may be damaged. "Try to replace the module memory."
  In vain:]

  You know? THX

  Hello

  There must be a hardware malfunction.
  You have tested a lot and nothing has worked
  I think there is not much to do, you all tired and I guess the authorized service provider could help you

  If your warranty is valid all should be done for free, so don t you worry and ask the experts ;)

• Tecra 9100 blue screen when you disconnect the power supply

  Hi people,

  Im having a major problem, Ive had a major problem with my tecra 9100, when I unplug the power cable and try to use the laptop on battery, the blue screen comes up saying NMI: channel check / IOCHK

  then the computer shuts down, it restarts only properley if I plugged power of ext,
  also something to note, when I unplug everything first, he's not str8, its only when I try to use the laptop, which is pressing a key

  If someone knows something about this could you please let me know

  Thanks carl

  Hello

  This has been already discussed here in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13784

  Check the sanremo poster, which refers to the knowledge base article Microsoft!