VMware and UPS (power of groups)
Someone at - it a configuration suggested for the use of VMware Workstation with a UPS?
The configuration on which I set is to install the utility on the host Machine and the Virtual Machine (s) UPS. The inverter is connected to the host via a USB port. The utility will stop the host on the blackout after n minutes. To start a virtual machine it takes the reins of USB, for example, the UPS utility.
On the power supply failure, i.e., on battery, the virtual machine is forced to suspend, releasing control of the inverter to the host Machine. After a few minutes, the host machine is stopped by the UPS utility. Logic looks good, although a bit convoluted.
Hope my explanation is clear.
Everybody brings something similar, something different?
Concerning
k
In general, I don't have the physical host directly communicate with the ups. In part it depends on what type of software your using UPS. I have a Tripplite and it has a 'server' and a client application. The server app is installed on the machine that is physically connected to the USB cable from the UPS. The app server can send a stop signal to any computer that is running the client application. If the physical host server application and my virtual machines have the client application. I put the threshold for virtual machines to close earlier than the host. (e.g.: 10% battery remaining closed when VMs.) Host stops when 5% remaining). This gives the VMs sufficient time to stop before the host stops. (Most of the VMS I don't suspend). No need to have to go the 'control' between the VM and the host.
For other brands of UPS, they can call their version of the software a "network" version and sometimes is not on any CD included, but you need to download or pay for it.
Tags: VMware
Similar Questions
-
WinXP
user belongs to a domain and user does not belong to the local administrator or power users groups, or any custom group and the user is not part of the domain administrators group, but user show that it is adminI did a gpupdate/force and restart twice PC
Yet, user indicate it is always admin when we right click on Start menu and see the possibility to open all usersHi elena_ad,
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link:
http://social.technet.Microsoft.com/forums/en/winserverManagement/threads
-
Hi all
I have two business units who want to have a view of their grouping. Create a dashboard for each cluster, or is there another way to approach this problem.
See you soon
Hi, I noticed that this thread has not been answered.
I then there is, we copied the main dashboard VMware and selected a default service for her (Cluster/Datacenter).
I hope this helps. Please try it first on a system of staging (lab).
File has been attached.
Gaston.
-
I'm new to VMware and need help.
I'm new to VMWare and barely installed ESXi 6.0 created a host but now I can not install Windows 2012 r2. Cannot access the ISO. Do I need the plugin integration customer or what. I called tech support and they would not help because I am on trial. Any help would be great. Thank you
You select the ISO in the settings of the virtual machine and select 'connect at Power On "? Alternatively, you can connect the ISO in the current state (power on) and then press CTRL-ALT-INS to 'hot' start the virtual machine.
André
PS: If it still does not work, check that you have a bootable ISO image, for example not only a picture of Service Pack.
-
How to develop and reduce lines or groups of lines in figures?
How to develop and reduce lines or groups of lines in figures?
Thank you
Casey
Select the rows (or columns):
Then, place the cursor on one of the row headings (the numbers on the left):
so that you see the carat facing downwards, then click here to bring up the context menu for the lines:
then select "hide selected rows.
-
Qosmio X 500 does not start and the power LED is flashing every 5 seconds
Hello
I need help my X 500 does not start now. I tried to launch the NB as usual and suddenly the X 500 start or even power up.If I press the power button / stop it makes no noise, the power LED on the button and the second power LED just bliks once and turns on and keep blinking every 5 seconds.
I tried to:
* Remove battery and power up with AC only
* power only to batteries
* remove the battery power button hold for 30 seconds and over power with AC, battery only athenbut it did not help.
I checked the LEDs AC & battery, but they do not blink, they are just RED, so there is no problem in battery or AC.
No idea where could be the problem?
Thanks for help
FrantisekHello
The failure of RAM could be the reason for this behavior of the laptop.
Remove the RAM modules with good modules tested and check the functionality of the laptop.
In the case of RAM isn t the troublemaker, the motherboard could be affected.Good luck and share your experience with us.
-
having changed the password problems and the power on password
problems in the password can be changed and the power on password screen. my code is 50793279 please help
Hello
Come in:
45691879
Concerning
-
Someone else did this happen to them? My MacBook Pro (early 2011) making a loud beep sound and the power and turn off several times while he was installing the new os 10.11.2 update this morning? Everything seems to work fine, I've just been caught unawares. I've never had such a thing happened to me in updating my mac. Someone else?
can happen
I think the install dialog says that the mac can shut down and put into service once more.
If its works well it should be good.
-
Forgot administrators and the power on password for my hp pavilion g6 with windows7. Halt # 80147381 thank you.
Hello
Try: 35825907
-
Mirror and rotation of whole groups of components layout
How it is possible to rotate or whole groups of mirrored components? If you select a group of components and apply the mirror or rotation on each component group feature is mirrored or rotated separately and not as a group.
Hi Nils,
It is not really possible.
If you enable a group of components and try to turn, each component will be rotatet for herself and not as a group.
Other customers also wanted him have changed, they have created a post in our forum for the exchange of idea.
If you like this idea a cudos and write an own post in this forum. If you have enough fans, our R & D will try to implement this in the future of the versions.
Best regards
-
When sending emails to the bcc and access to a group, I hit the button send and dates back to the Inbox without sending. I even changed users on my pc and it always does. I closed temporarily add-ons thinking that would help, but did not seem to make a difference. Can I have a virus?
Hello
- E-mail are what customer you referring?
If you use Windows live mail, then the number you posted is related to windows live and will be much better suited in Windows live forums. Click on the link below.
Windows Live Solution Center
-
KDL-46XBR9 shuts off and the power light flashes red
KDL-46XBR9 shuts off and the power light flashes red
It flashes ten times, then rehearsals.
-
XP is unable to complete the loading and the power of travel.
XP is unable to complete the loading and the power of travel. It will restart in Mode safe with no problems and then restart to normal safe mode. All programs and everything seem to work OK. CHKDSK/r was run from the installation disk and indicates disk errors have been corrected. Restart the hibernation or standby also works. Ntbtlog.txt is still crushed by the boot of good last and there is no help. It's very long and repeat the load lines and has-no-charge several times! Any ideas what to watch?
I have lived with this for a few months and reinstalled XP and then new service Pack 3. Nothing done until this difference
Hmmm...
NVIDIA drivers are definitely outdated.
If the system just stops (literally goes off), I suppose a marginal connection inside, an out-of-date driver or a heat problem.
You can carefully and without requiring too much force, remove one reinstall all you cable and connection inside including your RAM and all other devices installed just do one thing at the time, so you don't mix. One thing at a time... Unplug it and plug it in again.
If she runs in Mode safe, your it would mean that the system uses the default XP video drivers (that is why everything is so GREAT in Mode safe).
When you start normally and will charge drivers NVIDIA, things will run more hot. Will increase the time on the CPU and video card. Make sure that all your fans are running, and the system is properly ventilated and ventilated.
If the CPU or processor on the video card is a problem of heat it just stop - no warning, no newspaper, no nothing. Cool that turned off for awhile and it could work again for a bit.
I use the NVIDIA site and let scan them online take a look at your video system and see what he suggests for drivers and consider their analysis if they offer a new driver.
It is recommended to run the scan NVIDIA with Internet Explorer.
Here is the address of the NVIDIA page:
http://www.nvidia.com/download/Prescan.aspx?lang=en-usRead the instructions, and then click the GRAPHICS DRIVERS button to start the scan.
You must be on the 275.33 version and you are now on 178.13 (from you given msinfo).
6.14.11.7813 driver version<---- nvidia="" version="" 178.13="" from="">---->
Your msinfo32, video section should look like this when you are finished:
6.14.12.7533 driver version<--- the="" latest="" nvidia="" version="">--->
-
Access to the use of memory and processing power charge connect 6224 via SNMP.
Hi support them
Is it possible to access the use of memory and processing power charge connect 6224 via SNMP? If possible, should the mib I use?
Thanks in advance
Rogerio
When looking through the available MIB found in the zip file for download of the latest firmware. I see that the MIB fastpathswitching mentions 'agentSwitchCpuProcessGroup '.
MIB fastpathlogging has 'agentLogInMemoryConfigGroup '.
There is no reference document material about what offer different MIB.
I hope this helps.
-
HP Pavilion dv3t notebook. Each time get adapter connect to the laptop, it takes at least 10 minutes to get the AC adapter and power indicator light on. Sometimes it does not light on all day. It always happens any with the battery or not.
If I start the laptop with the light on the AC adapter and the power light, no matter how I move the power cord, it maintains support, works very well.
But if I start the laptop without the light on the AC adapter and the power led on even with the, i.e. start with the battery as power, no matter how I move the power cord, the led on the AC adapter and the light, i.e. no charge. He stops until the battery drain.
I believe that the AC adapter is good. But I have no idea why he has trouble in the light on the AC adapter and the power light on after to connect to the laptop.
Dv6 had a somewhat similar problem that was treated with a BIOS upgrade. I watched the latest BIOS for your laptop and there is nothing about a problem of load, however. If it works very well and also a long time that you turn it on with the AC plugged in but only has a problem with loading when you connect the adapter Windows runs, I'm tempted to say that it is a software problem as a problem with Windows power management. Maybe if you remove the hard drive, power supply, switch it on with battery only, then plug the adapter when you run in a pre-Windows environment, we can see if the same problem occurs. If it was my cell phone, I would also like to do the update BIOS level, just to see if maybe it would affect something. I could also try to run it from a Linux Live disc any and see if the same problem occurs in another operating system. Last resort I would begin focusing on the issues of possible material, as a module of taking bad AC, which is an other replaceable part that requires no welding.
Maybe you are looking for
-
Satellite Pro L20-someone ' one can tell me if I have a problem with the screen?
Hello I have a Pro L20 - PSL25E and I recently had problems with the screen, it was intermittently flickering/lose color and whiting almost (when the color fades white vertical lines begin to appear).This seemed to worsen after that I dropped it (onl
-
How to make an impression Nexus 7 tablet from Verizon Wireless to smart Photo 6520 printer?
I recently bought a Nexus 7 Tablet and do not know how to print emails and attachments to our HP photo smart printer 6520. It does not have a Windows operating system so I don't think I need print drivers. Any help will be appreciated. Thank you! Kim
-
The music stops when locking the keys
I have a weird problem with my Sansa Clip: it freezes when I lock the buttons. When he plays music I press and hold the home button to make it to lock the buttons. I get the message ' press on and hold the home button to unlock. the screen goes black
-
Win 7 - closing button displays updates to deal with but no updates ever treated on "stop".
Latest windows 7 Windows Update works fine in the sense that the traffic updates are treated and updated correctly. But there are 3 or 4 weeks, I noticed the power off button displaying the exclamation symbol and when I got "high" on the button it d
-
Epson scan cannot be started.
Window appears indicating that epson scan cannot be started. There may be a problem with the network settings. Having checked that the settings can not find the problem.