VMware clusters and extending on L2

Similar Questions

• How the doc "Setup for failover clustering and microsoft services U1 cluster" fits into the roadmap of documentation?

  Hello

  Starting on the route from VCP 4. Read a lot of discussions here with shiny things; Thanks to all who contribute.

  Is something I can't work on my own how this file: http://www.VMware.com/PDF/vSphere4/R40/vsp_40_mscs.PDF

  Is part of the roadmap of documentation: http://www.VMware.com/PDF/vSphere4/R40/vsp_40_esx_roadmap.PDF

  Should I just consider that last?

  Thank you

  It has to do with availability solutions.

  You can protect aid comments clustering or using the solution services that protect the virtual machine (such as VMware HA and VMware FT).

  André

• Requirements VMware HA and DRS.

  On vmware site I was just brushing my knowledge on VMware HA and DRS and found a conflict. Someone can it confirm please.

  One of the requirements for VMware vmotion and DRS turns "the virtual machine configuration file must not reside on a VMFS located on the shared data store. . . "(Ref: http://www.vmware.com/support/vc13/doc/c2vmotionreqs12.html) "

  But VMware HA says one of the requirements as "cluster-enabled VMware HA, all virtual machines and their configuration files to .

  reside on the shared storage (Fibre Channel SAN, iSCSI SAN, or NAS iSCSI SAN), because you have to

  ' be able to power on the virtual machine on any host in the cluster " (Ref: http://www.vmware.com/pdf/vmware_ha_wp.pdf ( )

  What does that mean? Or the constraint of VMware vmotion is wrong? I'm just confused!

  The first link is-old vMotion applies to Virtual Center 1.3 and ESX2.

  "The virtual machine configuration file should not reside on a VMFS located on the shared data store '... This applies to 2 ESX hosts. At the time, the virtual machine configuration (.vmx) file was located locally on the ESX host, run the virtual machine in/home/default vmware...  This file have been moved to the local directory on the target host during vMotion...

  This was changed to ESX3, who, with Virtual Center 2, introduced also HA...

  For HA to work all the VM files must reside on the shared storage. This makes all slender VM files available to other hosts of clusters at all times. (difficult to extract different files from a host of dead).

  / Rubeck

• ESX3.5U4/VC2.5 - move vmdk to adequate data store and extend the drive on the virtual machine

  ESX3.5U4/VC2.5 - move vmdk to adequate data store and extend the drive on the virtual machine

  Objective: move vmdk to store data with adequate storage and then increase storage D: 20G to 100G

  Converter is not available on this architecture. Can I migrate cold vm to the different data store, no prob.

  Question: Without use of the converter, method 3 can be used without a secondary vm? In other words, just by using target vm offline, online, offline? Or is it a problem of signing/OS disk on the Windows Virtual PC?

  I need to move vmdk in different LUN and extend drive vm windows on D: (non-OS drive). Is this possible via the single procedure? Options?

  To use method 3 to http://communities.vmware.com/thread/81121 requires available vm 'secondary', I did not.

  Method 3? Using of vmkfstools and another VM of Windows to extend a drive

  o stop the VM to resize

  o log in the console ESX Server via Putty

  o Type? vmkfstools? X & lt; new size of drive & gt; vmfs/volumes / & lt; storage volume name & gt;. / & lt; virtual server name & gt;. / & lt; the virtual disk name & gt;? That is to say. /vmfs/volumes/Storage1/my_vm.VMDK new disk size can be specified in kilo, mega, or gigabytes and will be the total size of the new disk. So if you want to increase a virtual disk of 20 GB of 24GO you would put 24000 m or 24g

  o the second virtual machine to help stop

  o change the second virtual machine settings and add the first virtual machine hard drive

  o power on the second VM and load the disk management snap-in and verify that the first virtual machine disk has unallocated on it space

  o select Start, run and enter diskpart.exe

  o the command? the list of volume? This will show you all the volumes.

  o select your volume based on the results of the list volume command, IE. ? Select volume 1?

  o type the command? extend? to extend the volume

  o check again the disk management snap-in and the volume is expected to be expanded with a greater ability

  o stop the second VM and remove (do not remove) the record of it

  o turn your first VM and the new space should be there and ready to use.

  Also, I'm already aware of Dell extpar:

  http://www.RTFM-ed.co.UK/?p=1310

  http://support.Dell.com/support/downloads/download.aspx?c=us & CS = 19 & l = in & s = DHS & ReleaseID = R64398 & formatcnt = 2 & starts = 83929

  for VI3, vmoiton of storage is made by RCLI plugin or a 3rd party

  I prefer the plugin

  http://www.virtualizationadmin.com/articles-tutorials/VMware-ESX-articles/VMotion-DRS-high-availability/storage-VMotion-SVMotion-VI-plugin.html

  In addition, if the option to increase the size of the disk in the VIC is grayed out, it sounds like a permissions issue.  Finally, you can not extend the disc using the VIC, if the customer in question has a snapshot.

• sleep and extended problem solved!

  Hi all.
  Finally I solved my problem (see "sleep and extended in windows XP" for more details).
  I uninstalled everything on HP printer because Windows XP plug-and-play service does not load the Power Manager settings if it is not the printer.

  Now I understand why the HP software does not work properly, you know?

  See you soon.

  Gianluca

  It seems that the HP software has adopted some features of the operating system. Normally, it is very good for the manufacturer to give the features more functions.

  But if there is a third software such as Power Saver from Toshiba could occure problems because the energy saver adopts XP power settings and it administer very dominate. If the HP printing software was not able to adopt the settings of MS!

  Hans Bye

• Sleep and extended in Windows XP

  My computer will not sleep or hibernation any more (maybe if I installed a HP psc). I want to know why.
  Thank you
  HP psc = HP printer Scanner Copier

  [Edited by: admin on 16/09/04]

  Do you know how can I restore the stand-by and extended functions?

• Registration for the Standard warranty and extended

  I have registered my system to the Standard warranty and also fact of registration for extended warranty Service (2 years) and _got message for registaration successful for both, standard warranty and extended warranty_. But on the verification of the details of my system to it always says my system is NOT REGISTERED and the guarantee here it shows only 365 days and not 3 years!

  Can someone pls help and inform me of the email address of contact of the Toshiba research customer service records and warranty extensions?

  * After how many days they are updating the registration information on ? *.

  Maybe something went wrong during registration or the system not updated status. As Jeffrey has already suggested, eventually the data was not updated and you have to wait one, two day (s).
  If we can't change the status of the guarantee, contact the service provider to authorize to clarify this issue!

  Concerning

• Table of clusters and the cluster is a bar counter, how can I change the color individually?

  Table of clusters and the cluster is a bar counter, how do I change the color of the bar individual meter for each element of the array?  I just realized that you cannot change the properties of an element of the array without changing everything.  For scale, I had to make digital for each graduation of the scale indicators so that each measure meter in the table in the cluster has individual scales.  I also had to do some calculations for each barmeter to display the correct proportions of 0 to 100% on the scale.  Now, I'm stumped on the color of the bar counter.  Basically, if the value exceeds a set value, the meter bar should turn red.  It must be in a table to be infinitely scalable.

  Thank you

  Matt

  And yet anothr approach...

  Right click on the bar of > Options to fill > maximum fill.

  

  The fill color of the same color as the background color, then make the background color transparent.

  Drop a box of color BEHIND the bar and the size correctly.

  He has this strange background 3D with flat bar, but what the Hey, his relatives. If its important a custom color box.

  Ben

• WAP300N as bridge and extender

  Is it possible to use the bridge and Extender mode at the same time with 2 WAP300N access points? I currently have a home network, where I have 2 access points wireless enabling to connect wireless devices and are bridged also to connect 2 cable networks. I want to know if I can get the same thing with 2 WAP300N devices.

  Hi, jochem.harteveld. Apparently, you can select a mode of operation at the same time.

• Question and Wireless N router and Extender G

  Hi all

  I would like to install internet ADSL2 + wireless in a hotel. I was thinking of doing this:

  Buying a router Wireless N ADSL2 + and extending it by buying a Wireless Extender G. Now when you visit the Extender G page it indicates the routers supported etc, only G routers are listed. Routers Wireless N do not work?

  If someone has a better idea to solve my problem please, say so.

  Internet to the 1st floor and must be extended to 4 other floors. The 1st floor to ceiling 2nd floor should not be a problem and the 2nd to 3rd and from 3rd to 4th should also not be a problem.

  Just buy a router Wireless G with Speedbooster and 3-4 Wireless G expanders?

  Thank you!

  Yes the Wireless G Extender works with the wireless G router. That you are considering buying an N series router, then you can go for an Access Point WAP200, you can set this access point in Repeater mode, and it will solve your purpose.

• How can I delete a partition and extend the other partition space?

  I have four partitions on my Windows 7 computer. And now, I find that the partition partition F has about 45 GB of free space. But the D partition is almost full and gives always notice the disk space is low. So, is that I can delete this partition F and extend my D partition with free space? Please, give me a solution. Thank you!

  Don Glen

  There is a 3rd party good master tool called easus partition 9.3 (free to try).  It changes the childs play.  BTW, 4 partitions are the maximum by HD

  http://www.partition-tool.com/?ad&gclid=COP4qK-ivL8CFWMQ7Aod2mgAHg

• What is the difference in the alta application and extend the alta?

  Mr President.

  What is the difference in the alta application and extend the alta?

  Concerning

  Alta application means - you change your application to alta and using only Alta Skin default skin

  While Extending means that you use your own skin (custom CSS file) that extends alta means you use alta, but you changed it for some components

  Ashish

• Can I have VMWare Player and Virtual Box to the same PC?

  Can I have VMWare Player and Virtual Box to the same PC?

  Can perform the same two times?

  Hello

  Yes, that's correct.

  --

  Wil

• PowerCLI script for datacenter clusters and is, ANDS vm guests in a CSV file.

  HI -.

  I need help to write a script powercli that collect information vcenter such as the list of each Datacenter and its clusters, hosts and vm in a CSV file.

  Thanks in advance!

  -Philippe.

  You can do something like this.

  But be aware that it will not report VMHost, Clusters and data centers that do not have any virtual computer in them.

  {foreach ($dc in Get-Data Center)

  foreach ($cluster Get-cluster-location $dc) {}

  foreach ($esx in Get-VMHost-location $cluster) {}

  Get-VM-location $esx |

  Select @{N = 'Center'; E = {$dc. Name}},

  @{N = "Cluster"; E = {$cluster. Name}},

  @{N = "$vmhost"; E = {$esx. Name}}, name

  }

  }

  }

• Linux VMware Tools and their dependencies

  Hello

  I want to install VMware Tools on one Linux Virtual MACHINE created with Workstation 10.x for Windows.

  Ce Linux distribution drift since Ubuntu 13.10.

  Je would like to know What packages are needed for a correct installation et configuration of these Tools.

  Also, I have would like to know If there is a Ubuntu repository where to download and install the latest version of these Tools.

  Thank you

  Good bye

  What is the difference between VMware Tools and Open Virtual Machine Tools?

  Copy and paste this question into Google!

  By chance, you have your repository in order to always download the latest version?

  I use only VMware tools and always uninstall first Open Virtual Machine Tools and also use - clobber-kernel-modules = if necessary when installing the VMware Tools on the distributions that have Open Virtual Machine Tools installed.