VMWare ESX 3.5 does not VCenter performance reports

Similar Questions

• ESX 3.5 does not start with two intel cpu on an ibm HS21 blade 5420

  I have 4 ibm HS21 blades that I bought recently and ESX 3.5 does not start on them if I have both CPU intel 5420 installed. It will start if I remove one of the CPU. This also occurs if I try ESXi.

  I have two blades I bought 8 months ago that work well with both CPU is installed. Blade models are very similar, "old" is hs21-8853a1c new knives is hs21-8853g3u.

  I have updated the bios and the controllers. At this point, I shot two blades of the additional processor so that I can use them but I would really like to put back them.

  Any thoughts?

  David,

  Welcome to the forums!

  Could check you if two microprocessors are executing a different step? If so, then the debate may be relevant here .

  Sanjana-

• VMware VDM Web Access does not support your operating system (Windows7 beta)

  I got this message when connecting to the Server Desktop VDM:

  "The unmet requirements."

  VMware VDM Web Access does not support your operating system'

  my version: Office: Windows 7 beta with IE8

  I works perfectly with Vista Business SP1 (as host operating system) with IE7:

  VMWARE VDM Client version 2.1.0 build-596

  How can I solve this?

  Thank you.

  I'm not sure that there is a way to solve it.   The beta version is not in the operating systems supported on page 22 of the VDM 2.1 guide.

  http://www.VMware.com/PDF/vdm21_manual.PDF

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• VMware View Manager "service does not work correctly."

  Location:

  I have 2 view connection Server 5.1.1 (VCS01 and VCS02) and VMware vCenter 5.0 1 u1 (VC01). The vCenter server is added to the view configuration and works without a problem. I don't use composer in this configuration, and I have a certificate installed, valid SSL on 3 servers.

  question:

  If I could connect the console administrator from view of VCS01 and I change something of the setting in "View Configuration\Servers\vCenter servers" vCenter server, vCenter server service turns red in the dashboard view admin with the status: 'the service does not work properly. This produces a few minutes later.

  

  The setting I changed allowed caching of size on a particular server.

  If I check the log on the second server View (VCS02), I see the following errors:

  714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > VC_OUTAGE:Url [Audit]: https://vc01.DomainName.x:443 / sdk
  2012 11-15 T 14: 11:24.493 + 01:00 WARN (0AFC-0100) VirtualCenter < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] https://vc01.domainname.x:443 / sdk is currently unavailable - attempt to reconnect
  2012 11-15 T 14: 11:25.960 + 01:00 WARN (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] problem in VC operation: "Authorization to perform this operation was denied." [com.vmware.vim25.NoPermission]
  2012-11 - 15 T 14: 11:25.984 + 01:00 INFO (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [Audit] VC_OUTAGE:Url: https://vc01.DomainName.x:443 / sdk
  2012 11-15 T 14: 11:25.984 + 01:00 WARN (0AFC-0100) VirtualCenter < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] https://vc01.domainname.x:443 / sdk is currently unavailable - attempt to reconnect
  2012 11-15 T 14: 11:25.985 + 01:00 WARN attempt to reconnect (0AFC-0100) previous VC < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] didn't work, will wait before trying again.
  2012 11-15 T 14: 11:41.111 + 01:00 WARN (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] without the permission of Sciez VC.
  2012 11-15 T 14: 11:42.566 + 01:00 WARN (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] problem in VC operation: "Authorization to perform this operation was denied." [com.vmware.vim25.NoPermission]
  2012-11 - 15 T 14: 11:42.569 + 01:00 INFO (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [Audit] VC_OUTAGE:Url: https://vc01.DomainName.x:443 / sdk
  2012 11-15 T 14: 11:42.570 + 01:00 WARN (0AFC-0100) VirtualCenter < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] https://vc01.domainname.x:443 / sdk is currently unavailable - attempt to reconnect
  2012 11-15 T 14: 11:42.570 + 01:00 ERROR (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] exceeded maximum number of VC reconnection attempts.
  2012 11-15 T 14: 11:42.571 + 01:00 ERROR (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] permission to perform this operation was denied.
  2012-11 - 15 T 14: 11:43.021 + 01:00 INFO (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [Audit] VC_OUTAGE:Url: https://vc01.DomainName.x:443 / sdk
  2012 11-15 T 14: 11:43.021 + 01:00 WARN (0AFC-0100) VirtualCenter < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] https://vc01.domainname.x:443 / sdk is currently unavailable - attempt to reconnect
  2012 11-15 T 14: 11:44.501 + 01:00 WARN (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] problem in VC operation: "Authorization to perform this operation was denied." [com.vmware.vim25.NoPermission]
  2012-11 - 15 T 14: 11:44.503 + 01:00 INFO (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [Audit] VC_OUTAGE:Url: https://vc01.DomainName.x:443 / sdk
  2012 11-15 T 14: 11:44.503 + 01:00 WARN (0AFC-0100) VirtualCenter < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] https://vc01.domainname.x:443 / sdk is currently unavailable - attempt to reconnect
  2012 11-15 T 14: 11:44.504 + 01:00 WARN attempt to reconnect (0AFC-0100) previous VC < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] didn't work, will wait before trying again.
  2012 11-15 T 14: 11:59.630 + 01:00 WARN (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] without the permission of Sciez VC.
  2012 11-15 T 14: 12:01.072 + 01:00 WARN (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] problem in VC operation: "Authorization to perform this operation was denied." [com.vmware.vim25.NoPermission]
  2012-11 - 15 T 14: 12:01.074 + 01:00 INFO (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [Audit] VC_OUTAGE:Url: https://vc01.DomainName.x:443 / sdk
  2012 11-15 T 14: 12:01.074 + 01:00 WARN (0AFC-0100) VirtualCenter < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] https://vc01.domainname.x:443 / sdk is currently unavailable - attempt to reconnect
  2012 11-15 T 14: 12:01.076 + 01:00 ERROR (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] exceeded maximum number of VC reconnection attempts.
  2012 11-15 T 14: 12:01.076 + 01:00 ERROR (0AFC-0100) < ConfigureHostsCbrc-8f714f2e-55dd-48b3-8a39-ac825f59a6cd-1352984469542 > [ServiceConnection25] permission to perform this operation was denied.

  Once I reboot VCS02, the State turns green again in the view admin console. So I have a workaround, but I wonder if there is a fix or is it a (UN) known error?

  I had similar errors when I enabled cached host and had to give my user VC the privilege to change the configuration advanced options for guests. It's so she can allow the CBRC in advanced settings. (not in the documentation).

  It seems however, that your VC username missing certain necessary rights. I suggest double check for you rights user VC and take a look at your logs of VC. It should give you some info.

• VMWare Virtual Center Server does not start after Windows Update

  Help!  I'm under vCenter 5.1 on Windows 2008 R2 with SQL Server 2008 R2 Standard.  I have applied the latest updates for Windows (critical only) as it applied Service Pack 3 to SQL 2008 R2.

  Now the vCenter Service does not start.  It generates error 7024 in the Windows system log:

  The VMware VirtualCenter Server service stopped with the error special service that the system cannot find the specified file...

  and error 1000 in the Windows application log:

  Could not initialize the VMware VirtualCenter. Closing...

  PS - I confirmed that the SQL instance is running.

  Absolutely nothing has been done except the Windows and SQL updates.  Everything worked fine until this point.  Ko an article deals with a "space" condition, but there are a lot of available space.

  I have attached the file vpxd.log, he created.

  Clues?

  Thank you.

  OK it turns out that the WWW service is interfering with vCenter Service on Port 80.  The thing is that the WWW service has been set to manual start.  Somehow during the upgrade Windows or SQL, one of them decided to turn auto-start. After the reboot, the conflict occurred.  Once I put the WWW back service to manual start the vCenter service started OK.

• 64-bit RHEL on ESX 5.5 does not work.

  Hello world

  Recently I bought the PC practice ESXi.

  The processor is Intel i7 4770

  Card mother MSI Z87 - G43

  CPUID/MicroCode 306c 3/17

  V1.7 BIOS Version E7816IMS

  ME Version 9.0.30.1482

  I installed Windows 7 Ulitmate on it. In VMware workstation, I installed ESX5.5 then when I try to install 64-bit Redhat Linux on ESX.

  It gives me the error "this virtual machine is configured for 64-bit guest operating systems but 64-bit operation is not possible." This host does not support Intel VT - x"

  But in settings virtualization BIOS settings are enabled.

  Enabled Intel virtualization technology

  Intel VT - D active Tech

  Can anyone help me regarding it.

  Thank you

  Vikrant

  In addition to the functionality in the BIOS of the host, you must pass the virtual host to ESXi. Open the VM ESXi settings and enable 'Virtualiser EPT-x/Intel VT or AMD-V/IVR' in its settings, "CPUs".

  André

• VMWare Update Manager Server does not work after changing name of host/IP

  I have Virtual Center 2.5 update 4 and Manager Update on two separate servers.

  I had to rename and change the IP of the Server Manager to update, and now the Server Update Manager does not work.

  Here are two mistakes that I get, when you try to activate the plugin Update Manager:

  "The server took too long to respond" or "VMWare Update manager cannot accept applications because VirtualCenter.

  Server is not reachable, or it's the database is not reachable

  by train to stop'

  That's what I did to change the host name:

  -J' uninstalled virtual UpdateManager 1.0 Clients Center customer.

  -I stopped the Service VMware Update Manager on the update server

  -J' I renamed the update server changed its IP address and the host name and then rebooted the server (without starting the VMware Update Manager Service)

  -J' changed the value of the fields

  dbo. VPX_EXT_CLIENT. URL

  dbo. VPX_EXT_SERVER.UR

  -in the vCenter (on the vCenter server) database reflecting the new name of the server (the new hostnameis to pings to the vCenter server)

  -J' restarted the vCenter Server

  -J' started the Service VMware Update Manager on the update server

  -J' installed the client plugin update manager Virtual Infrastructure client

  -J' have TRIED to activate the plugin, but I got a warning about an untrusted certificate (I guess it happened also when I installed the client for the first time, and everything worked) and then I got two errors:

  sometimes "the server has taken too much time to react" and a few other times "the VMWare Update manager cannot accept applications because VirtualCenter.

  Server is not reachable, or it's the database is not reachable

  by train to stop'

  I think that there are a few other references to the host name of the Update Manager, which I have not changed, on the vCenter server or Manager Update server...

  Does anyone have an idea what do I do?

  Thank you in advance.

  I would try just reinstalling the update on existing installation manager.  Do not overwrite the database in the process so that you shouldn't really lose anything.  Not the plugin, but since the Update Manager vCenter installation media.

  Give that a try and let us know how it goes.

• Latest vmware image of ReactOS does not have in TP

  Hello

  I just wanted to try ReactOS VMware last image in the TP and it does not work in there.

  Without upgrading hardware to HW10, I eventually see a driver to install for a sound card, and then a crash VM asking to restart windows.

  From there on, I get a blue screen with the 1st error.

  Upgrade to HW10 keeps giving me the blue screen.

  Of course, this could be a problem on their part ReactOS, but thought it may be a scenario of debugging interesting to see why it crashes.

  Download here:

  ReactOS - browse /ReactOS/0.3.15 on SourceForge.net

  Select specific VMware image.

  --

  Wil

  Huh.  I tried ReactOS 3.0.15 with the Tech Preview workstation and got the same BSOD as you report it (no surprise, it's practically the same virtual environment) and also got the same race of BSOD this virtual machine under WS 9.0.x, isn't what we broke up recently, at least.  If I remove the USB controller, however, it works very well... that if the USB controller is present it seems reliable BSOD.  Could very well be a bug in ReactOS...  Please let us know if you find something else to this topic!

  See you soon,.

  --

  Darius

• problem with Boot Camp, VMware Fusion 3, ethernet does not (not driver)

  Hello guys,.

  I have Windows 7 Pro 64 bit installed in Boot Camp and I'm running as a virtual machine using VMware Fusion OSX 10.6.6 3.1.2.

  The problem I have is that the ethernet does not work under VMware, even with VMware Tools installed.  Device Manager shows no driver installed.

  I googled and found a lot of suggestions to add ethernet0.virtualDEV = "e1000" to the simultaneous file, but I looked and this line is already there.

  I tried reinstalling VMware, VMware Tools, the Boot Camp drivers, NIC Add/Remove VMware settings, change NAT to the deck and vice versa. Nothing works.

  Any suggestions?

  The CARD is an Intel PRO 1000 MT and uses the E1G6032E.sys driver that is located in the:

  C:\Windows\System32\DriverStore\FileRepository\nete1g3e.inf_amd64_neutral_7f08406e40c6ede2

  You will need to copy the 3 files to a temporary folder or on the desktop to be able to access it from the device for a manual installation manager.

• Custom main screen does not properly perform fields center

  I have a CustomMainScreen, but it is not completely central, field layout (they are a bit too left when Field.FIELD_HCENTER is applied to the field)

  Screenshot:

  

  Code:

  this.label_field = new CustomLabelField("Welcome to Test App",Field.FIELD_HCENTER);
  

  import net.rim.device.api.ui.Color;
  import net.rim.device.api.ui.Font;
  import net.rim.device.api.ui.Graphics;
  import net.rim.device.api.ui.component.LabelField;
  
  public class CustomLabelField extends LabelField
  {
      private int _newcolor = Color.BLACK;
      private Font _font = Font.getDefault();
  
      public CustomLabelField(String label)
      {
          super(label);
      }
  
      public CustomLabelField(String label, long field)
      {
  
          super(label,field);
      }
  
      protected void paint(Graphics graphics)
      {
          graphics.setColor(this._newcolor);
          graphics.setFont(_font);
          super.paint(graphics);
      }
  
      public void setColor(int newcolor)
      {
          this._newcolor = newcolor;
      }
  
      public void setFont(Font newFont)
      {
  
      }
  }
  

  Thank you!

  The code you have looks like it must be placed correctly, with a slight concern:

  graphics.setFont (_font);

  By doing this I think that you can change the font size.  Now the LabelField will already told the Manager how big it is, and it will be based on the police, he said.  You change it.  I assume that you make it smaller.  So presumably the LabelField has been fitted out with a larger font, your smaller font does not fill the space.

  However, you do not want to set the font in your object, that the definition of the police may cause to the new provision, which will cause a repaint, which will set the police, resulting in a new provision, another painting,...

  Then try something like this:

  SerializableAttribute public class CustomLabelField extends LabelField
  {
  private int _newcolor = Color.BLACK;
  _font private policies = Font.getDefault ();

  public CustomLabelField (label As String)
  {
  Super (label);

  this.setFont (Font.getDefault ());
  }

  public CustomLabelField (label As String, long field)
  {
  Super (label, Field);

  this.setFont (Font.getDefault ());
  }
  ....

  If this doesn't help, can you say what Manager you add this?

• The VMware Tools ISO image does not exist or is not accessible

  I have a few virtual machines with a yellow exclamation mark on the vmware tools icon indicating that they can be updated. When I try and update vmware tools manually, I get the error: "VMware ISO image tools exist or is inaccessible. See the error of the stack for more details on the cause of this problem". Below in the window of the error stack, I see messages, 'called 'VirtualMachine.MountToolsInstaller' or object < servername > ESXi '192.168.3.39' failed. Cannot install VMware Tools. An error occurred trying to access the image file ' / usr/lib/vmware/isoimages/windows.iso ' to install VMware Tools: 0 (input/output error). If your product comes with the module of VMware tools, VMware ESX to reinstall, then try again to install the VMware Tools package in the virtual machine. »

  I got messages stating I must check vmtools directory symbolic links and I think that those who are present. I also tried to manually navigate to the image file, but it seems that there is a problem any with the file system. See the images below:

  

  ESXi installed on a USB key. The directory of the iso images is corrupt? Can anyone help me on how can I fix? Should I just replace the USB key, or is there another way?

  See the input / output error on the screen usually indicates a faulty drive (or in this case device USB). I wouldn't waste a lot of time and replace the USB key.

• Expansion vDisks in HP CommandView &amp; ESX you see does not change

  Hi all

  Recently added records and developed a vDisk Optional HP (HP P6300 EVA), but the other storage does not appear in the client vSphere for use.
  Am I missing something here?
  Any input would be greatly appreciated.
  Kind regards
  Nash

  Welcome to the community,

  after resizing the vDisk in CommandView (and in the meantime for him at the end of the expansion), rescan the vmhba in "Configuration"-> "Storage adapters" on your ESXi hosts and then open the properties of the data (on the ESXi server) store and increase/develop its site (i.e. extend VMFS partition).

  André

• link action in the dashboard does not see my reports

  Hello world

  I'm trying to build a dashboard that the first page has several links to pages, each page has several report

  the question am facing is when I'm creating the link of Action and eyebrows through it, I don't see / my reports does not see the link of action

  no idea why?

  If you have tried to create Action link to a BIP report via access BI content you will notice you get an error message.

  My work around has been to use navigate to a Web Page and then use the URL to the report when I open the report in the browser

  w

• Image_Item does not work in reports 10 g

  We cannot use ImageItems in our report.
  We had a table with a few images of a column with Datatype Longraw. Because we cannot use it with forms/States 10 g, we cahnged the column of the Table to the Blob and migrate data with Import/Export. In the forms, we have no problem, we can view old photos migrated, we can import new images with Webutils Client_Image.Read_Image_Item and we can display these new images as well.
  
  But now we have a problem with the reports. Our report has an element (new tbl_nameSET) in the application and that the point is displayed in the report. If the report is run for a record with an upsized Image, it works fine, but with a new Record and a new Image_Item imported, the report omits (on the server) with the following information in EM:
  MIT Fehler finished: REP-69: Internet Fehler REP-62203: Internet Fehler beim read the document - unable to make RenderedOp for this operation.
  
  It is a very small value but with 2 images (both are small).
  
  Any ideas out there?
  
  Kind regards
  Mark

  Found the solution by myself.
  The problem is not in the reports, it is within forms. The Image_Item must be the type of file "BMP" instead of "JFIF".
  That solved the problem.

• VMware vsphere replication appearing does not in vcenter?

  Here's what I've got so far.

  2 esxi host
  1 vcenter
  1 Chief invited

  vCenter
  -Data Center
  -esxi1
  -freebsd (guest operating system)

  -esxi1
  -vcenter
  -replication

  I installed the replication ovf file and it is running. but when I go to my host of burst and right-click on it I don't see replication downstairs. as you can see, I created a data center in vcenter and added two esxi host. What Miss me? anything to fix this? I do not see the clone function, but I don't see the functionality of replication, as shown here.

  http://www.yellow-bricks.com/2012/09/17/back-to-basics-install-configure-and-use-vSphere-replication/

  Hello

  Have you used customer web vSphere to deploy the unit of replication vSphere, if no, you will not only get vSphere Replication option.

  VMware vSphere 5.X Configuration and deployment of basic replication | vDiscussion

  Concerning

  Mohammed Emaad