VMware ESX 4.0.0 in connection mit Windows Server 2008R2 Datacenter (4cpu) - license

Similar Questions

• How to activate the Internet connection on Windows Server 2003 is installed in the virtual machine in VMware Workstation 8?

  I have Windows Server 2003 is installed on a virtual machine in VMware Workstation 8. I need it to learn and practice the use of the Active Directory. I've also set up 3 Windows XP workstations connect to it, which means that they can communicate with Server 2003. What is lacking is the Internet connection on all of them. When I run ping 8.8.8.8 in one of these virtual machines, I get, 'Destination host unreachable.'

  I'm not sure, what if the problem comes from the settings in Windows or the settings of the virtual machine.

  Can someone help me?

  Thank you, guys. I was finally able to put in place. It was quite an ordeal to deal with IP addresses and virtual networks. Here's how I did (in the screenshots) in case someone else needs it.

  (I also confess that it is perhaps one of the ways to implement. Maybe there is an easier way to do it with DHCP...)

  1. in your computer where is installed VMware Workstation 8 begin the "Virtual Network Editor." It is located in the folder of installation of VMware Workstation. And implement the network following (VMnet2 in my case):

  

  2 then in VMware Workstation itself in the virtual machine when Windows Server 2003 is installed set up two network as connections:

  This one is for external access to the Internet:

  

  And this one for intranet communications AD:

  

  3. then in the machine virtual de Windows Server 2003 set up what follows for two network adapters:

  For Internet access:

  

  Then, you need allow this connection to share:

  

  And then for the ad access to workstations (ensure that the static IP address is in the range specified in the virtual network over VMnet2 network editor). I've also set up DNS to 127.0.0.1 because I installed on this Windows 2003 DNS server:

  

  4. from the Windows 2003 VM try ping 8.8.8.8. It should work now.

  5. go to each workstation, in my case, Windows XP, each in its own virtual machine and set up the network in the VMware Workstation as follows:

  

  6. then in the virtual machine, configure the network connection for Windows XP workstation. Don't forget to assign a new static IP address for each workstation, which not coinside with IP of the domain (this IP address must come from the range specified in the virtual network over VMnet2 network editor):

  

  7. try first ping the domain, in my case ping 192.168.237.128. And then Internet, ping 8.8.8.8. The two should work!

  Continue with steps [5-7].

• How to reset the password for administrator on windows server 2008 datacenter eddition before the login in vmware

  How to reset the password for administrator on windows server 2008 datacenter eddition before the login in vmware

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Remote access is installed, but refuses connections on Windows Server 2003. Why is this and how can I solve this problem?

  Reinstalled Windows Server 2003, configure remote access, unlocked the ports, and I can't connect with my Windows XP computer. I had no problem until I reinstalled.

  Hi DistrictDigital,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.

  Windows Server - general forum

• Level broker for connections to windows server 2012

  Dear,

  I would like to know if there is any risk that the upgrade of the OS of the server holding the broker for connections, web access and management of the profile of windows server 2008 R2 to windows server 2012 or more to enable support of HTML5 connector? Please tell us what is the scenario for these updates.

  Concerning

  Hi Habibgha,

  Hoping to upgrade the OS on-site? It should work, but I don't know if it has been tested. Assuming that your infrastructure servers are virtualized, perhaps you could take a snapshot or clone this virtual machine and try in a lab environment?

  Or you can work on a step-by-step approach, the first stage being, if your current farm is 8.0.1 you can upgrade all roles on your current server on 2008 R2 for vWorkspace 8.5, then build a new VM with 2012 R2 and install IIS and access to the Web of vWorkpace role. Create a new vWorkspace site web access on the new server just for the connector of HTML5.

  I hope that helps!

  Thanks, Sam

• Cannot connect to Windows Server Core after installation with VMWorkstation

  Yes, I chose not to add the ISO image later and now, I ran the installation a dozen times in all directions.

  Whenever the installation finishes I'm not given the option to enter a password instead, I am presented with an 'Other' account with a password set on it already which is unknown to me.

  Does anyone have this problem before?

  the5thace wrote: whenever the finishing of the installation I am not given the option to enter a password instead, I am presented with an 'Other' account with a password set on it already which is unknown to me.

  Well, when you make a Windows Server 2008 Standard (Server Core Installation) it seems to be quite normal to the «Different user» login  What I did after clicking on 'Another user' I typed in Administrator and no password and then clicked on the round right arrow button on the screen, the next screen has warned "the password must be changed before logging on the first time." and then click OK.  In the next screen, I entered the password and confirm the new password as was then able to connect.

• Habe seid langer Zeit die message beim update "connection mit dem Server wird available" und're bleibt immer auf die 2% are much schon tried hat helped kann einer mir nicht helfen yesterday?

  nichts geht schon seid days oder Wochen bleibt er immer mehr da Hangen

  Hi digitalphotodesign@online

  Please see the following KB Docs:

  • Connection errors. CS5.5 and later, Acrobat DC
  • Error download or update Adobe Creative Cloud applications

  If the problem persists, then please contact customer service regarding this issue.

  Kind regards
  Rahul

• ESX 3.5 U2 - Audio for a Windows Server 2003 x 32 for Citrix.

  OK, the inevitable is here. I need audio for my VM to do proof of concept.

  It is even possible in ESX 3.5 U2?

  Hmmm... I never thought of that before. We give our users access to powerpoint, but most of them use it... my boss would have said them difficult if they complained about not having his property.

  • Kyle

• ODBC 32-bit connection on Windows Server 64-bit Oracle 10 or 11

  Hello
  I have were implementation of VMware vCenter 4.1 (probably the product only well known and widely used with this deadly combination) and need to install Access ODBC for Oracle on the side of 32-bit Windows to install the Server Update Manager component, which is still a 32-bit application)
  
  The problem with the Oracle configuration is that in no case I found that a 32-bit ODBC registered pilot after installation (of the 32-bit client and 64 database server). I tried a third-party driver for oracle (e.g., easysoft). They recorded in the 32-bit ODBC Manager, but they have never had a successful login.
  
  Also if this requirement of vCenter is questionable (more debatable as this component 32 Setup is not allowed on a separate OS 32, not because she is separated, but because that is a 32 bit OS) I would make it work.
  
  Could suggest a way to get this working?
  
  Thank you
  Fabio Alfonso
  http://www.fabiodalfonso.com

  Fabio of Alfonso wrote:
  Hello
  I have were implementation of VMware vCenter 4.1 (probably the product only well known and widely used with this deadly combination) and need to install Access ODBC for Oracle on the side of 32-bit Windows to install the Server Update Manager component, which is still a 32-bit application)

  The problem with the Oracle configuration is that in no case I found that a 32-bit ODBC registered pilot after installation (of the 32-bit client and 64 database server). I tried a third-party driver for oracle (e.g., easysoft). They recorded in the 32-bit ODBC Manager, but they have never had a successful login.

  Also if this requirement of vCenter is questionable (more debatable as this component 32 Setup is not allowed on a separate OS 32, not because she is separated, but because that is a 32 bit OS) I would make it work.

  Could suggest a way to get this working?

  Thank you
  Fabio Alfonso

  When you install the client software for Oracle on Windows (which is needed to support the ODBC as the seat of ODBC Oracle driver more than the native client software) driver ODBC is NOT installed by default. You need to go back and do a "custom" installation and select "Windows components".

• Cannot import Microsoft Windows Server 2008 R2 with Hyper-V virtual machines to VMware ESXi 4.

  Hi team,

  I use VMware vCenter Converter Standalone to import certain Microsoft Windows Server 2008 R2 with Hyper-V virtual machines to VMware ESXi 4, using another Windows Server 2008 R2 as the machine Agent Converter. Well, the agent connects to the Windows VM source very well (I used the net use command to create a line of conduct...), perhaps no chance to connect to the computer target VMware ESxi 4 and make the converter doesn't work...

  Following is the error message:

  "Unable to connect to the host specified" from the converter agent machine. " It is perhaps because the host is not available on the network, there is a problem with the network configuration or management on this host services do not react. Check all components of converter to be able to connect.

  So, my question is; is it possible to create a work around (like the net use Windows command above) to make possible the connection of the converter Agent on Linux VMware ESXi 4 machine Windows machine, to directly import the virtual machines of Windows Hyper-V to Linux VMware?

  Thanks in advance,

  It's even easier than that

  Use this: http://www.winimage.com/

  Which will convert *.vhd *.vmdk, so you don't need to do all this... Of course, another way is to start the machines, leaving them on Hyper-V and go through the network and process virtual machine as physical machines and do a P2V on the network...

• Number of concurrent connections to remote desktop on Windows Server 2008 and 2012

  Dear,

  Can someone help me with what is the maximum number of concurrent connections on Windows Server 2008 (Standard & Enterprise) and Windows Server 2012 as well.

  Kind regards

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Connection error Active Directory Windows Server R2 2012

  Hello

  That's my problem, I have two servers both running Windows Server R2 Datacenter 2012 I installed AD - DS on one of them and allow the installation to configure the DNS settings, this server is also a DHCP server. On the server I want to connect to AD, I address DNS pointing to my AD server which is 192.168.1.60 and it's also getting an IP address from the DHCP server. But it connects to Active Directory, when I try the ping command on the domain name which is yewman.email he's trying pings an external IP address (which is my public ip address because I also have the yewman.email of real estate) how to fix this? It's the mistake of connection AD:

  Note: This information is intended for a network administrator.  If you do not have your network administrator, notify the administrator that you have received this information, which has been recorded in the C:\Windows\debug\dcdiag.txt file.

  The following error occurred when DNS was questioned about the resource record (SRV) service location used to locate an Active Directory (AD DC) domain controller for the domain "yewman.email":

  The error was: "the DNS name does not exist."
  (0x0000232B RCODE_NAME_ERROR error code)

  The query was for the SRV record for _ldap._tcp.dc._msdcs.yewman.email

  Common causes of this error are:

  -The DNS SRV records to locate an AD DC for the domain are not registered in DNS. These records are automatically saved with a DNS server when an AD domain controller is added to a domain. They are updated by the AD DC at set intervals. This computer is configured to use DNS servers with the following IP addresses:

  192.168.1.60

  -One or more of the following areas do not include delegation to its child zone:

  yewman.email
  E-mail
  . (the root zone)

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• VMware Player for Windows Server 2003 x 64?

  What is the latest version of VMware Player (free) that can be installed on Windows Server 2003 R2 SP2 Standard 64 bit?

  VMware-player - 6.0.7 - 2844087.exe

• VMware Tools on Windows Server 2008 R2

  Hi all

  I have 10 of VMware Workstation. Just installed Windows Server 2008R2 and cannot find the properties of VMware tools. I tried already re-stalling/uninstall and reinstall of VMware Tools, but when I click on the VMware Tools icon in the windows system tray I see on disable/output /. I see no VMware tools in Control Panel. What could be wrong? How can I access VMware tools?

  Don't worry, there is nothing wrong. Please take a look at KB VMware: VMware tools UI Toolbox is no longer available in the guest operating system

  André

• Question for ESXi or VMware Server guest operating system license

  Hello - I'm sure it's more a matter of Microsoft, but I have not found anything definitive - perhaps people who use really this out...

  My goal is to create two virtual servers from MS Windows 2008 Std 64 bit on the server of VMWare or ESXi installable. I bought Windows 2008 Std, 11 (a phyiscal and a virtual) licenses. Is I meet problems by using only 11 license to create two virtual servers? I'll have to buy another copy of MS Windows 2008 std 1 + 1 to create two virtual servers?    THX.

  -steve

  Its one of these licenses MS issues, but it relates to virtualization because you intend to virtualize it so here's the guide, you can check http://download.microsoft.com/download/F/C/A/FCAB58A9-CCAD-4E0A-A673-88A5EE74E2CC/Windows_Server_2008_Virtual_Tech-VL_Brief-Jan_09.docx and the best way to check is to call MS support for free since MS tends to change they licenses positions often is the only way to ensure that its accuracy.

  Product	Maximum allowed instances running in a virtual environment by license
  Windows Server 2008 Standard	One
  Windows Server 2008 Enterprise Edition	Four
  Windows Server 2008, Datacenter Edition	Unlimited
  Windows Server 2008 for Itanium Based Systems	Unlimited
  Windows Web Server 2008	One *.

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

  Kind regards

  Stefan Nguyen

  VMware vExpert 2009

  iGeek Systems Inc.

  VMware, Citrix, Microsoft Consultant