VMWare Server Auto walk stop VM
The documentation states that you must activate this option when installing VMServer 2. I installed 3 times now looking for AN option in addition to the locations on the disk and can't find anything. In the management console, there are options for start/stop with the host, however, virtual machines any "off" to start. The documentation says "Note to allow the virtual machine to be started and stopped on a Windows host, you must also select Allow virtual machines to start and stop automatically with the system during the installation of VMware Server.»
Can someone tell me the buttons to activate this option?
Thank you
Bill
If you select a computer and then click "Move up", it should become "activated" when it hits the sections 'Specified order' or 'Any order' and you can then change the settings to set the start or stop (as long as you have administrator privileges). Please see the attached screenshots.
A witch hunt to start during the startup of the host if you have virtual machines on a data store that is not available at startup, for example sometimes if it's on an external or drive network rather than local.
--
If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.
Tags: VMware
Similar Questions
-
Muy buenas a todos, as tal
Estoy con el tema virtualizacion, uso linux, para ser exactos Debian Lenny 5. Me dio por test Vmware, pero me estan leaving some as otros problemas. For example the virtual machine detengo cuando, me sale el siguiente error:
SR-the tests: ~ # /etc/init.d/vmware restart
Stop the VMware autostart virtual machines:
Machines virtual done
Stopping VMware management services:
VMware Virtual Infrastructure Web Access
The Agent Host VMware Server done
Stopping VMware services:
Fact VMware authentication daemon
Machine virtual communication interface fact
Virtual machine monitor fact
Networks bridged on/dev/vmnet0 fact
Fact the host network detection
DHCP server on/dev/vmnet1 done
Network invited only on/dev/vmnet1 done
DHCP server on/dev/vmnet8 done
NAT service on/dev/vmnet8 fact
Network invited only on/dev/vmnet8 done
Virtual ethernet fact
Starting VMware services:
Virtual machine monitor fact
Machine virtual communication interface fact
Virtual ethernet fact
Networks bridged on/dev/vmnet0 fact
Host only network on/dev/vmnet1 (background) fact
DHCP server on/dev/vmnet1 done
Host only network on/dev/vmnet8 (background) fact
DHCP server on/dev/vmnet8 done
NAT service on/dev/vmnet8 fact
VMware Server Authentication Daemon (background) made
Shared Memory available is
Starting VMware management services:
VMware Server Host Agent (background)
VMware Virtual Infrastructure Web Access
From the VMware autostart virtual machines:
Machines virtual done
En Web Access, como to can see, not me lo arranca, y no alguna idea is donde could fact el problema?
Por otro lado, (no porque se, teoricamente is not access could) the virtual machine, estoy UN rato en ella cuando me sale el siguiente error:
Alguien sabe a what debe este tipo error of?
Muchísimas gracias a todos, cordially
Buenas
I think that you can try desinstalarlo, reiniciar todo y test.
Debian suele tener things muy por lo luxury that has lo mejor you can serve también UN apache mas recompilar real desde www.apache.org
If this answer is util, por favor su marca used notificador.
Gracias / looks
-
VMware Server VM stopping when administrators log VMware Server version 1.0
Hello
In our environment, we have 3 servers VMware with 3-4 virtual machines running on each server in VMware (Version 1.0.5).
When disconnect us from VMware Server some of the virtual machine are stop down and in one case stop the VM. Has anyone encountered this problem before?
Servers running VMware Server on has a good specification & there are enough resources on each of the servers.
I'd appreciate any help.
Thanks in advance, P
Hello. Go to the Options tab in the settings of the virtual machine, and then select start/stop on the left side. In the right part, change the account of Virtual Machine in "Local System account". This will keep the VMS running when you disconnect.
Good luck!
-
Script in VMWare Server to stop, save and reboot the virtual machine
Hello!
I want to create a script from windows vista Pro (which is my vmware server host) this judgment of a virtual machine before you save it and restart the virtual machine after.
Does anyone know how to do this? This is my first script, so I don't know how to start...
I saw this link:
http://www.Petri.co.il/virtual_script_startup_shutdown_vmware_servers.htm
But it seems to be for VMware Server 1.X because I can't found the vmware-cmd in the server vmware 2.0 folder.
Thanks for your help!
I don't know if you are receving notifications to your PMs, just I have sent you a PM >
-
VMware Server on windows 7 host, will not autostart invited after upgrade to vista
I have upgraded vista to winodws 7. I had to reinstall vmserver 2.01 for networking. The last problem is that Vmserver auto start the guest.
I changed the options for start/stop of the virtual machine settings.
This worked under Vista 32-bit, but not under Windows 7 RTM 32-bit.
any ideas?
I am currently using vmrun to start from a batch file
Follow-up: I could get this to work, although the causes escapes me and the fix is not pretty:
1. Remove VMWare Server
2 remove folders vmware related in c:\program files (or installed path)
3. manually remove all references to "vmware" of the registry
4 reboot.
5 reinstall the server vmware to the default locations.
I tried everything but the manual registry clean. (Standard warning blow your system here) Once I did this and reinstalled, now auto-start for clients with the host properly operating system.
I hope this helps someone else.
-
Fedora to access VMware server 2 web
Hello
I had problems with the interface web vmware server 2. When I first install vmware server 2 on a clean system, it works fine. However, after a reboot, the web interface is more accessible to the general public.
When I do
"netstat - anp |" grep vm ' I see port 902 listening however ports 8222 and 8333.
SELInux is disabled, I also turned to IPtables and ip6tables as well as fedora firewall.
I tried rerun vmware - config.pl, however this does not resolve the issue. I also tried to restart the management interface and that does not work either.
When I restart the vmware service, everything seems fine:
Stop the VMware autostart virtual machines:
Virtual machines [OK]
Stopping VMware management services:
VMware Virtual Infrastructure Web Access
VMware Server [OK] host agent
Stopping VMware services:
[OK] VMware authentication daemon
Virtual machine communication interface [OK]
Virtual machine monitor [OK]
Networking networking on/dev/vmnet0 [OK]
Detection of network host [OK]
DHCP server on/dev/vmnet1 [OK]
Host only networking on/dev/vmnet1 [OK]
Networking networking on/dev/vmnet2 [OK]
DHCP server on/dev/vmnet8 [OK]
NAT service on/dev/vmnet8 [OK]
Host only networking on/dev/vmnet8 [OK]
Virtual Ethernet [OK]
Starting VMware services:
Virtual machine monitor [OK]
Virtual machine communication interface [OK]
Virtual Ethernet [OK]
Networking networking on/dev/vmnet0 [OK]
Network invited only on/dev/vmnet1 (background) [OK]
DHCP server on/dev/vmnet1 [OK]
Networking networking on/dev/vmnet2 [OK]
Network invited only on/dev/vmnet8 (background) [OK]
DHCP server on/dev/vmnet8 [OK]
NAT service on/dev/vmnet8 [OK]
VMware Server Authentication Daemon (background) [OK]
Shared Memory available [OK]
Starting VMware management services:
VMware Server Host Agent (background) [OK]
VMware Virtual Infrastructure Web Access
From the VMware autostart virtual machines:
Virtual machines [OK]I watched acroos the forums and tried quite a few options, but do seem to be getting anywhere, I was wondering if anyone has any other ideas.
I use a 64-bit version of vmware.
Thank you
Hello
I had same problem - Fedora 14 64 bit & vmware 2.0.2... and nothing on google :-/
Because I have not found a solution for this problem, so I wrote this post (my first btw :-))
After you install vmware (and patch before), everything works well before the first server to restart. After reboot - web access (port 8222 & 8333) has not worked.
For me, it has worked:
(1) check if vmware - spend is running (when vmware service is started):
# ps to the | grep vmware - pass
--------------------------
root of 1752 0.0 0.6 50760 225708? SSL 14:36 0:01 / usr/lib/vmware/bin/vmware-hostd - a d u - /etc/vmware/hostd/config.xml(2) If vmware - spend does not, try to run vmware - pass manually (without the-d (demon) parameter):
# / usr/lib/vmware/bin/vmware-hostd - a u /etc/vmware/hostd/config.xml
--------------------------
(there was no mistake as.. libvmomi.so.1.0: no such file or directory)
(3) copy (or link) libraries starting from/usr/lib/vmware/vmacore/and/usr/lib/vmware/lib/to /lib64/
# cp /usr/lib/vmware/vmacore/libvmomi.so.1.0 /lib64/
# cp /usr/lib/vmware/vmacore/libvmacore.so.1.0 /lib64/
# cp /usr/lib/vmware/lib/libexpat.so.0/libexpat.so.0 /lib64/
(4) just try to restart the vmware service or server; I had to run vmware - config.pl new - vmware crashed.
If this isn't the case, vmware - always come running after you restart, try to rerun manually and wait minute (if it is started).
I already had virtual machine in vmware, so I got another problem...
VMware-get started, but just for a minute. After a minute, he wrote something as... out of memory. I tried to rename my vm and vmware has worked well (WebAccess Inc.) ...
So... Here is the solution to another problem...
5) simply to stop the vmware service
judgment of vmware for the service #.
6) Rename the library libxml2 vmware based
# mv /usr/lib/vmware/lib/libxml2.so.2 /usr/lib/vmware/lib/BAD-libxml2.so.2
VMware will skip this library and use a for/lib64 /...
(7) restart the server and try out it
-
Oracle listener does not not on vmware server 2 guest OS Centos
The command completed successfully -
VMware Server 2.0 CIFS data store bug?
I posted this problem a few weeks ago, but I still can't solve, then I write it again with new information on the problem. I think it could be a bug in VMware Serever but I am not certain about it.
I use VMware server 2.0.2 (b203138) with a Windows 7 Ultimate x 86 as vmware server host and configuration of the NAS data store. The data store hosts all virtual machines, including the ones configuration files, and it's a shared folder located in a Windows Server 2008 Enterprise x 86 SP2. The network mode working group, not in mode active directory.
Symptoms of the problem:
If you stop or restart the host server, when it is once again the CFS data store is unusable and VMS are inaccessible, even if all of them were arrested at the time of the restart.
The option to update the data store does not solve anything.
If the NAS data store is deleted and recreated from scratch, the machines are still not accessible. It is also necessary to remove and re-add the VMs.
If you only reboot the VMware services then you lose not the NAS data store or virtual machines.
If you only reboot the NAS then also you don't waste either the data store, or virtual machines, although they were in operation when you rebooted the NAS; the same happens if you stop communication network between the host server and the NAS.
A delay in starting services VMware does not solve anything.
I tried the start VMware services in manual mode, to be sure that there is full access to the NAS before starting the service, but VMware is still losing the NAS data store and virtual machines, this isn't a problem with permissions to access the network or network connectivity.
Any help would be much appreciated. Thank you.
This applies to all the BONES that I know. VMWare server 2.x just keeps the security attributes for authenticated access to CIFS shares underlying network based data stores you set.
I see some information that it's actually worked in server 1.x version, but I can only confirm.
I don't know if it is a bug or by design since this behavior has persisted through several versions 2.x, it can be design to users of reader for commercial versions.
Good luck
Peter
-
Hello
I have a centos 5.4 with server 2.0.2 vmware server installed on it. I am running two virtual machines on it: Microsoft windows xp pro sp3 and Centos 5.4 (the two 32-bit).
I have the last time, my virtual machines are automatically shut down, for example: I start the two vm at night and in the morning they are turned off.
Often happens that vmware-mngm service is not accessible, I'm trying to access on browser, but is not accessible. After I restarted the service vmware-mngm, it works, but aflte some operations with virtual machines, it gives me an error and stop responding again.
SELinux is disabled
getenforce
People with disabilities
After I log in Panel of vmware server I get this error:
The server cannot complete a request (HTTP 0).
Ok
The server encountered an unexpected condition which prevented him from meeting the demand. If the problem persists, contact your system administrator.
After the mgmt-vmware restart I can connect. I have attached the log files in a zip archive.
Help, please!
Thank you
Hello
first of all, check the host with a tool like memtest memory. Maybe the RAM is not ok.
After that, perhaps your problem is this one: http://communities.vmware.com/message/1326842#1326842
In above discussion, the solution is the following: http://communities.vmware.com/message/1431577#1431577
Let me know if it works for you.
A saludo/best regards,.
Pablo
Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. MUCHAS gracias!
-
Can I run a machine virtual de VMware Fusion, VMware Server 2?
I looked at a bunch of documentation confusing but couldn't find a clear overview of what VMware Server 2 does in fact.
I hope that I can take the virtual machines that I've created with VMware Fusion and download them on VMware Server 2 on a server somewhere and run it from there.
Is this possible? Is there any clear, simple documentation that indicates how to proceed?
Thanks for any information you can give me!
Hello
If you run the virtual machine in fusion directly in vmware server, these are the steps to follow:
(1) find out where are the fusion virtual machine files.
(2) stop & remove merge (do not remove fisically hd!) virtual machine.
(3) copy files of the virtual machine of fusion to the vmware server host (with the .vmx file and the hard should be enough) in the directory you designate as data store for vm vmware server files in the installation of vmware server.
(4) use the "adding a virtual machine to inventory" to navigate to the file .vmx of the virtual machine that you copied before
(5) the machine running and try. (if a question arises, you say that you copied the VM).
Maybe you should do some additional steps as reconfigure it the virtual machine under vmware virtual network install, but there are minor and easy changes.
Here is some information about the files that make up a virtual computer: http://www.vmware.com/support/ws55/doc/ws_learning_files_in_a_vm.html
A saludo/best regards,.
PabloPlease consider awarding
any useful response. Thank you!! -
Por favor considered premiar
Las useful responses. MUCHAS gracias!
-
In my configuration of VMware Server 2, I would like to create a role that helps users where all they can do is create, start, and stop the virtual machine. Nothing more. Can what privileges I give to make sure that they can do it without problems?
Thank you
Try the following - works for me:
Data store-> Browse Datastore + file management
Virtual machine-> inventory-> create
Virtual machine-> Interaction-> all the
Virtual machine-> Configuration-> add existing disk + add new disk + add or remove devices
Resources-> Machine virtual Assign to the Resource PoolIf you get errors, take at look at the hostd.log file as it should show you the details of the exception which is quite easy to find what a privilege you need to grant.
Guy Leech
VMware vExpert 2009
---
If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.
-
VMware Server 2 VM does not start due to problems of Hyper-V
I ran Hyper-V and wanted to move to VMware. I downloaded VMware Server 2 to test because it's free (until we start with real solutions VMware).
So I installed VMware parallel with Hyper-V (remove role, install vmware, install the role), converted all virtual machines Hyper-V with VMware Converter and removed Hyper-V (remove all virtual machines, remove the Hyper-V server, stop services, remove role, restart).
Now I run VMware Server, start a virtual machine and get this error:
"VMware Server and Hyper-V are not compatible. You must remove the role Hyper-V on your system before running VMware Server. »
We have a Dell PowerEdge 2970, 2 x Quad AMD Opteron, 16 GB of RAM with Windows Server 2008 64-bit.
Try:
bcdedit /set {current} hypervisorlaunchtype off
Then restart.
-
I was unable to boot VMware-server - 2.0.1 - 156745.i386.rpm with my new fedora 11 due to the following error... any idea?
-error-
/usr/bin/vmware-config.pl
Ensuring services for VMware Server are stopped.
Stopping VMware services:
None of the vmmon modules pre-built for VMware Server is suitable for your
kernel running. Do you want this program to try to build the vmmon module for
your system (you must have a C compiler installed on your system)?
Using compiler "/ usr/bin/gcc". Environment variable CC to override.
What is the location of the directory of C header files that match your running
kernel?
/lib/modules/2.6.29.4-167.FC11.i686.PAE/build/include
Extract the sources of the vmmon module.
The construction of the vmmon module.
Using 2.6.x kernel build system.
do: enter the directory ' / tmp/vmware-config3/vmmon-only '.
do /lib/modules/2.6.29.4-167.fc11.i686.PAE/build/include/ - C... SUBDIRS = $PWD SRCROOT = $PWD. modules of
make [1]: Entering directory ' / usr/src/kernels/2.6.29.4-167.fc11.i686.PAE'
CC /tmp/vmware-config3/vmmon-only/linux/driver.o
In file included from /tmp/vmware-config3/vmmon-only/linux/driver.c:31:
/tmp/vmware-config3/vmmon-only/./include/compat_wait.h:78: error: conflicting types for 'poll_initwait '.
include/Linux/poll.h:67: Note: previous declaration of 'poll_initwait' is here
In file included from tmp/vmware-config3/vmmon-only/./include/vmware.h:38,
from /tmp/vmware-config3/vmmon-only/linux/driver.c:99:
/tmp/vmware-config3/vmmon-only/./include/vm_basic_types.h:108:7: warning: "__FreeBSD__" is not defined
In file included from tmp/vmware-config3/vmmon-only/./include/vcpuset.h:103,
of tmp/vmware-config3/vmmon-only/./include/modulecall.h:37.
of tmp/vmware-config3/vmmon-only/./common/vmx86.h:33.
of tmp/vmware-config3/vmmon-only/linux/driver.h:29.
from /tmp/vmware-config3/vmmon-only/linux/driver.c:101:
/tmp/vmware-config3/vmmon-only/./include/vm_atomic.h:329:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmmon-only/./include/vm_atomic.h:333:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmmon-only/./include/vm_atomic.h:401:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmmon-only/./include/vm_atomic.h:407:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmmon-only/./include/vm_atomic.h:506:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmmon-only/./include/vm_atomic.h:595:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmmon-only/./include/vm_atomic.h:684:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmmon-only/./include/vm_atomic.h:773:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmmon-only/./include/vm_atomic.h:775:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmmon-only/./include/vm_atomic.h:860:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmmon-only/./include/vm_atomic.h:862:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmmon-only/./include/vm_atomic.h:945:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmmon-only/./include/vm_atomic.h:947:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmmon-only/./include/vm_atomic.h:1028:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmmon-only/./include/vm_atomic.h:1030:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmmon-only/./include/vm_atomic.h:1223:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmmon-only/./include/vm_atomic.h:1227:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmmon-only/./include/vm_atomic.h:1536:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmmon-only/./include/vm_atomic.h:1663:7: warning: "_MSC_VER" is not defined
In file included from tmp/vmware-config3/vmmon-only/./include/vm_basic_asm.h:46,
of tmp/vmware-config3/vmmon-only/./include/rateconv.h:45.
of tmp/vmware-config3/vmmon-only/./include/modulecall.h:40.
of tmp/vmware-config3/vmmon-only/./common/vmx86.h:33.
of tmp/vmware-config3/vmmon-only/linux/driver.h:29.
from /tmp/vmware-config3/vmmon-only/linux/driver.c:101:
/tmp/vmware-config3/vmmon-only/./include/vm_basic_asm_x86.h:62:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmmon-only/./include/vm_basic_asm_x86.h:177:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmmon-only/./include/vm_basic_asm_x86.h:346:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmmon-only/./include/vm_basic_asm_x86.h:453:7: warning: "_MSC_VER" is not defined
In file included from tmp/vmware-config3/vmmon-only/./include/vm_asm.h:43,
from /tmp/vmware-config3/vmmon-only/linux/driver.c:103:
/tmp/vmware-config3/vmmon-only/./include/vm_asm_x86.h:486:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmmon-only/./include/vm_asm_x86.h:779:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmmon-only/./include/vm_asm_x86.h:820:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmmon-only/./include/vm_asm_x86.h:922:7: warning: "_MSC_VER" is not defined
In file included from /tmp/vmware-config3/vmmon-only/linux/driver.c:119:
/tmp/vmware-config3/vmmon-only/./common/hostif.h:53:7: warning: 'WINNT_DDK' is undefined
/tmp/vmware-config3/vmmon-only/Linux/driver.c: in function 'LinuxDriverSyncCallOnEachCPU ':
/tmp/vmware-config3/vmmon-only/Linux/driver.c:1423: error: too many arguments to function 'smp_call_function '.
/tmp/vmware-config3/vmmon-only/Linux/driver.c: in function 'LinuxDriver_Ioctl ':
/tmp/vmware-config3/vmmon-only/Linux/driver.c:1987: error: 'struct task_struct' has no member named 'euid.
/tmp/vmware-config3/vmmon-only/Linux/driver.c:1987: error: 'struct task_struct' has no member named 'uid '.
/tmp/vmware-config3/vmmon-only/Linux/driver.c:1988: error: 'struct task_struct' has no member named 'fsuid '.
/tmp/vmware-config3/vmmon-only/Linux/driver.c:1988: error: 'struct task_struct' has no member named 'uid '.
/tmp/vmware-config3/vmmon-only/Linux/driver.c:1989: error: 'struct task_struct' has no member named 'egid.
/tmp/vmware-config3/vmmon-only/Linux/driver.c:1989: error: 'struct task_struct' has no member named 'gid '.
/tmp/vmware-config3/vmmon-only/Linux/driver.c:1990: error: 'struct task_struct' has no member named 'fsgid '.
/tmp/vmware-config3/vmmon-only/Linux/driver.c:1990: error: 'struct task_struct' has no member named 'gid '.
/tmp/vmware-config3/vmmon-only/Linux/driver.c:2007: error: too many arguments to function 'smp_call_function '.
make [2]: * /tmp/vmware-config3/vmmon-only/linux/driver.o error 1
make [1]: leaving directory ' / usr/src/kernels/2.6.29.4-167.fc11.i686.PAE'
make: * http://vmmon.ko error 2
make: leaving directory ' / tmp/vmware-config3/vmmon-only '.
Unable to build the vmmon module.
For more information about how to troubleshoot module, please
visit our Web site at " " http://www.VMware.com/go/UNSUP-Linux-products "and "
" http://www.VMware.com/go/UNSUP-Linux-tools ". "
The execution is canceled.
Look here for the patch to module 2629 vmware servers: http://communities.vmware.com/message/1261181
It worked for me with F11, although I'm not 64-bit.
Jeff
-
Simple player for VmWare server?
Hello
I'm under VmWare server 2.0 on my desktop Ubuntu, I often need to configure new virtual machines to test.
My qyestion is: is there a quick way to run a VirtualMachine (for example the player) or I have every time to start the server? Can we install VmPlayer with VmServer?
Thank you
The Player and Server products fit together. However...
On the Web console VI for the virtual machine, there is a command to create a shortcut on the desktop. When you double-click the shortcut and enter your credentials, it will open a console for this virtual machine. If the virtual machine does not work, it will be started. Or you can use the vmrun utility.
Close the console doesn't stop the host, of course. If you want to stop it, you will need to use the web console to VI, the vmrun utility, or just simply the guest to close.
Good luck!
-
Adding a new interface vmnet to VMware Server 2.0 via command line
Hello
I am running the following:
# vmware vmware - v snake
VMware Server 2.0.0 build-122956
Snake vmware # uname-a
Linux 2.6.18 - 92.el5PAE #1 SMP snake.kw kills Jun 10 19:22:41 EDT 2008 i686 i686 i386 GNU/Linux
Snake vmware # cat/etc/redhat-release
Release of centOS 5.2 (Final)
I'm having problems trying to add a new switch Virutal. I go about it the wrong way - or is she even care?
/$ vmnet2 hostsvc/net/vswitch_add
2009-02-08 16:22:42.681 "App" 3086431936 WARNING: = BEGIN if METHOD does not CALL DUMP PU =.
2009-02-08 16:22:42.681 "App" WARNING-Invoking 3086431936 on
vim.host.NetworkSystem:networkSystem2009-02-08 16:22:42.681 "App" 3086431936 WARNING-Arg vswitchName:
"vmnet2.
2009-02-08 16:22:42.681 "App" 3086431936 WARNING - Arg spec:
2009-02-08 16:22:42.681 "App" 3086431936 WARNING: Error Msg: "the operation is not supported on the object."
2009-02-08 16:22:42.681 "App" 3086431936 WARNING: = END has NO METHOD CALL DUMP =.
{(vmodl.fault.NotSupported)
dynamicType = & lt; unset & gt;
MSG is "the operation only is not supported on the object".
}
The reason for this - I want to set up an new HostOnly adapter on the system. I don't see a way to do this via the VI Web Access console.
I am more happy to be told RTFM, if the appropriate section of the FM is highlighted
Any help would be appreciated.
Thank you
Kevin
I'm not supported, but there is little valuable documentation on this unfortunately set command.
To change the network, such as the addition of interfaces more host-only, simply launch vmware - config.pl even if doing so requires all VMs running to be break-stop unfortunately.
---
If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.
Maybe you are looking for
-
Hi all I'm noting the problems to sync my Iphone contacts with Gmail. I followed all the steps in order to clarify my Gmail account and its synchronization options. Accordingly, I find most of my contacts in Gmail, but it happens that some of the con
-
Navigation tabs on the left side of the screen.
I have Windows 8. When I moved my cursor on the left side of the screen in the corner up or down. Down would take you back to the start screen and the top takes back you to the last app that opened its doors. OK I did an update and they are gone. The
-
Plugins installed disappear when I restart my computer
I am running Firefox 3.6.13. I had a file corruption problem and had to reformat the image of the factory and then reinstall all my software. I used mozbackup firefox backup settings. I have restored and he handed my favorites and passwords very well
-
Sometimes my y-50 makes rattling
This sometimes makes clicking noise so my y50, at various times, a bit like having something to do with a fan. When my computer is running, and you can hear the fans speed up, it disappears. for now, they usually click once a second someone knows wha
-
change the name of the computer on the network from a PC ToshibaUser
I want to change the name that appears on the network after installation of vista to stop reading ToshibaUser-PC