VMware-server screen of the console value

Similar Questions

• Are there known problems of VMware Server transition to the Workstaton

  Hello

  As VMware Server end of support announced ( http://www.vmware.com/support/policies/lifecycle/general/index.html) I was looking at transition to VMware Server 2 of VMware WorkStation. I have a Red Hat Linux host machine that has a VMware Server running on it with a single virtual machine. I was hoping to find out what are the problems might face to make the transition from one environment to another.

  I am aware that the server and the workstation cannot co exist on the same system, so basically I need to uninstall the server and install the work station. I am also aware that virtual machines are generally compatible between the two products. I also read on the comparison between products. ( http://vmfaq.com/entry/5/ )

  Are there other traps?

  Thank you

  Varun

  Hello

  You can download the VIX API (it contains the text console vmrun command - he didn't need a desktop case to run) from here.

  If you install the VIX API in a remote machine (not here where the workstation it is installed), you will be able to administer the computer zone in a passing distance.

  Of course, you can do the same thing on the workstation itself locally, using vmrun/vix it is included with workstation.

  Here you will find a tutorial on using vmrun to administer the virtual machine.

  Hope this helps

  Best wishes / Saludos.

  Pablo

  Please consider to assign all useful or correct answer. Thank you!! - Por favor considered premiar any respuesta correcta o util. ¡¡MUCHAS gracias!

  Virtually noob blog

• Distorted screen of the console using Ubuntu Linux on Satellite C70-B-212

  Hi all

  I have a problem with Linux on my laptop Satellite C70-B-212. The videochip Intel Graphics 4400 is supported by Linux, but on this laptop, it gives very distorted output on the console screen. I see a few vertical lines on the screen showing a few ghosts strange images of the output.

  The Office of exit itself seems to stop smoking well, until I have a screen and move it to the bottom of the screen. You can see the top of the screen some distortion in the upper line.

  In Windows everything works fine. When I use the parameter 'nomodeset' turns off the kernel mode setting these lines do not appear. But then, I expect that 3D hardware acceleration is disabled too.

  I suspect that this is a timing issue with the screen of the computer. Just a very minor lag on the clocks or sync.
  It could be just my laptop and then it just cloud be replaced or maybe it has to do with the series.
  Anyone seeing the same issue on this model or series.

  Having Linux on C70-B-212.
  Who can verify this by starting Linux liveCD on laptop C70-B-212.

  Thank you

  Marco

  Hi Marco

  It sounds like a driver problem => kernel.

  You can try a kernel later maybe?
  Do you know that you are using atm?

  in terminal type:

  uname - r

  Course Fedora uses 3.16 nuclei which is a very recent (if not the most recent) output.

  Some Ubuntu distro oriented have test of nuclei in the repositories, you will have to add it manually.
  Maybe it's worth a try?

  Tom BR

• Migration of DHCP: Old name of the server appears in the console, but OK on server DHCP itself

  Last night, I've migrated our production from 2008 to 2012 R2 DHCP servers. Monitoring the migration pretty well thanks to all of our test environments and PROD so guide. Check the DHCP logs on the new server, everything seems to go OK, but there is a question that we can not understand:

  -In the DHCP console on our desktops, I right click on DHCP for 'add a server... '. »
  -Select the "this authorized DHCP server: ' and I see the new name of the server and the INVESTIGATION period.
  -Now, DHCP in the console, the FORMER name of the server appears under the node.

  I thought enter ADSIedit and change the name of the DHCP server might help, but it didn't.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home

  MSDN forums:

  https://social.msdn.Microsoft.com/forums/en-us/home

  See you soon.

• question when you click Server tab in the console

  Hi am in weblogic 10.6.0 so I have a problem when I click on the server tab in my console it takes long to open tab mybe 30 mins and she no longer display this error message in red

  A server is a WebLogic Server instance that runs in its own Machine virtual Java (JVM) and has its own configuration.

  This page summarizes each server that has been configured in the current field of WebLogic Server.
  Message icon - timeout error occurred while interacting with the WLS_REPORTS. Limited information is available.
  Message icon - timeout error occurred while interacting with the WLS_FORMS. Limited information is available.
  Message icon - timeout error occurred while interacting with the WLS_REPORTS. Limited information is available.
  Message icon - timeout error occurred while interacting with the WLS_FORMS. Limited information is available.

  I turned off the pc and restart it and it market

• Fill area of the screen with the first value in the record group

  Hi guys, what the title essentially says. I have a display element that is populated by the by selecting the appropriate option in a LOV. Is there a method that I can put in when a new instance of the form or something else to fill the screen with the first item in the record group used to fill the lov to ensure when the load form display area is not empty. I know I have to hard just in code, but I would have the value come from the record group.
  
  
  Thank you
  
  Published by: user13390506 on August 25, 2010 05:39

  This works very well for me:

  Created a record group (RG1) with the following order of selection:

  select table_name, table_name from user_tables order by 1
  

  Created a button on the Web that are running the following:

  PROCEDURE pop IS
     rg_id RecordGroup;
     gc_id GroupColumn;
     col_val VARCHAR2(1000);
     n number ;
  BEGIN
  
     rg_id := Find_Group( 'rg1' ); 
  
     IF Id_Null(rg_id) THEN
     Message('Record Group rg1 does not exist.');
     RAISE form_trigger_failure;
     END IF; 
  
     n := Populate_Group( rg_id) ;
     gc_id := Find_Column( 'RG1.TABLE_NAME' ); 
  
     IF Not Id_Null(gc_id) THEN
       col_val := GET_GROUP_CHAR_CELL( gc_id, 1 );
       message(col_val);
     End if ;
  
  End;
  

  I guess the record_name.column_name at the top of case...

  François

• VMware vSphere - ESXi - cannot leave the console VM access?

  I'm under ESXi 4.1 on a server of Dell T110

  I connect to ESXi with vSphere

  vSphere is running within a VM in Windows 7

  The Windows 7 VM is running in VMware Fusion on my Mac OS X system

  When I'm in vSphere and I selected a virtual machine and I click on the tab console on some systems the VM console release me when I press control + keys command as it should.

  pfSense (FreeBSD), Ubuntu Server and Windows Server 2008 (before installing VMware tools) behave like that. I can't get out of their screen of the console. I must stop these VM out of their access to the VM consoles.

  Windows 7, Windows Server 2003, Ubuntu Desktop, etc, that all behave as I expect. When I press control + command keys I am released from the VM console and I am able to navigate in vSphere.

  After I install VMware Tools on Windows Server 2008 I don't have to press anything to be released from the VM console can I just move my mouse outside the console and interact with vSphere, which is what I expected.

  Shouldn't be able to leave the console VM using Ctrl + Cmde in any virtual computer if VMware Tools is installed?

  Anyone know what could be causing this device or a way around it?

  Thanks in advance.

  If the tools are installed as you have seen, you can safely move out of the console.  However, without tools, have you tried to release the cursor?

• The console screen

  How to stop the screen from the Console that appears on the desktop page every time that I start the MacBook Pro?

  Then, it remains on the platform. I tried some logical ways to remove it, but it always returns.

  Would be grateful for the help, thanks.

  Sara

  What means 'logic' have you tried?

  Have you tried all methods/locations listed here:

  http://www.Macworld.com/article/2047747/take-control-of-startup-and-login-items. HTML

• VMware 2.0 error: the remote device or resource does not accept the connection

  Hello

  I'm new to VMWare and have not installed any softaware in a few years.

  I downloaded and installed VMware 2.0 on my laptop that runs Windows 7 Enterprise.

  The installation completed successfully and rebooted without problems.

  When I click on the icon to go to the homepage of the VMware Server I get the following error, which I can not solve: -.

  The device or resource (mw7sisuox4hwzy) is not configured to accept connections on port "8333" (where mw7sisuox4hwzy is my host name).

  Can someone help me.

  Thank you

  your local administrator username and the password will be able to access.

  iDLE-jAM | SC 2, SC 3 & VCP 4

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points

• How to upgrade to vmware server

  I want to upgrade my vmware server 2 to the newer version I downloaded the current vmware server and start the installation.  The installation process asks me if I want to repair or remove.  I thought I'd have a got a msg asking if I wanted to upgrade.  Am I missing something?

  Go ahead and uninstall/remove.  Then install the new version.  Be sure that all your virtual machines are closed (non-suspended) before uninstalling.

  BTW, what version you are currently running?  (What build?)  Are you sure that you are actually updating the version/version number?

• VMware Server and T-Mobile Huwaei BroadBand Stick

  Hi all

  I came across this post in discussions of woskstation and its exactly the same question that I see:

  http://communities.VMware.com/message/1509413

  The problem is that I can't turn off the VMware USB Service on my host machine, because there is no. Anyone of you experts can tell me how to disable this in VMware Server please?

  Or do you want to know what part of VMware Server may be in conflict with my stick to wide band and advise me on how I can have as much mobile broadband and vmware server running on the same host machine.

  Thanks in advance

  the installation of fixing VMserver USB part is not trivial - see

  http://sanbarrow.com/network/cmdguide2workstation.html

  who wrote for my computer, but it applies as well to VMserver.

  Have you tried to re - install?

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

• Can I run a machine virtual de VMware Fusion, VMware Server 2?

  I looked at a bunch of documentation confusing but couldn't find a clear overview of what VMware Server 2 does in fact.

  I hope that I can take the virtual machines that I've created with VMware Fusion and download them on VMware Server 2 on a server somewhere and run it from there.

  Is this possible?   Is there any clear, simple documentation that indicates how to proceed?

  Thanks for any information you can give me!

  Hello

  If you run the virtual machine in fusion directly in vmware server, these are the steps to follow:

  (1) find out where are the fusion virtual machine files.

  (2) stop & remove merge (do not remove fisically hd!) virtual machine.

  (3) copy files of the virtual machine of fusion to the vmware server host (with the .vmx file and the hard should be enough) in the directory you designate as data store for vm vmware server files in the installation of vmware server.

  (4) use the "adding a virtual machine to inventory" to navigate to the file .vmx of the virtual machine that you copied before

  (5) the machine running and try. (if a question arises, you say that you copied the VM).

  Maybe you should do some additional steps as reconfigure it the virtual machine under vmware virtual network install, but there are minor and easy changes.

  Here is some information about the files that make up a virtual computer: http://www.vmware.com/support/ws55/doc/ws_learning_files_in_a_vm.html

  A saludo/best regards,.
  Pablo

  Please consider awarding

  any useful response. Thank you!! -

  Por favor considered premiar

  Las useful responses. MUCHAS gracias!

• SLED 11 host - VMware Server 1 upgrade to VMware Server 2, former VM work now "(invalid).

  The other day, I upgraded my work, the latest installation of VMware Server 1 to the latest VMware Server 2 for linux 64. Everything went perfectly with the installation, except for the little matter that now my Windows Vista, Windows XP SP 3 and my VM Windows 2000 are listed as "not valid" in the inventory. They have never worked.

  What is the best way to start troubleshooting this?

  Sorry we couldn't get you go - I'm sure we could give enough time.

  If you have installed from the rpm package you should just be able to uninstall via an RPM EI and then will delete the virtual machines and their associated files.

  Guy Leech

  VMware vExpert 2009

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Install VMWare Tools running under VMWare Server 2 Server

  I have converted a physical server using VMWare converter 4.

  When I start VMWare server 2 using the vmdk file converted - I need to install VMWare tools on this server.

  How do I do that?

  If you return to vCenter Converter, which you can do it from another machine that installed him as long as he has access to hard and you .vmx files product, there is an option to "configure the Machine' rather than 'Convert the Machine' and this should allow installation of the tools in the image. If the converted image actually starts on the server 2.0 then there is an option in the web interface (https://yourserver:8333) to install VMware Tools when the prompt is selected in the left pane.

  Guy Leech

  VMware vExpert 2009

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• VMware Server VM stopping when administrators log VMware Server version 1.0

  Hello

  In our environment, we have 3 servers VMware with 3-4 virtual machines running on each server in VMware (Version 1.0.5).

  When disconnect us from VMware Server some of the virtual machine are stop down and in one case stop the VM. Has anyone encountered this problem before?

  Servers running VMware Server on has a good specification & there are enough resources on each of the servers.

  I'd appreciate any help.

  Thanks in advance, P

  Hello.  Go to the Options tab in the settings of the virtual machine, and then select start/stop on the left side. In the right part, change the account of Virtual Machine in "Local System account". This will keep the VMS running when you disconnect.

  Good luck!