Similar Questions

• Cannot SSH in vmware player (can use the local IP address but not external IP)

  As above

  Cannot SSH in vmware player (can use the local IP address but not external IP)

  Am new to vmware, so if you need information to help me on what you'll need to tell me how to get

  See you soon

  Vodkaholic27, let me start with the layoff of vodka for a bit and then set Virtual Machine network card to bridged and then assign a static IP address that is appropriate for the guest as the physical LAN operating system is the host.  Then in the local physical network for static IP address router you assigned in the guest OS configure it to allow Port Forwarding on the appropriate port.  Then, you will be able to access from outside local physical host network.  If it's just on the other system on the physical LAN to the host that you want to access the guest you need not set up the Port Forwarding on the router on the local physical host network, simply use linked by a bridge to the network adapter in the Virtual Machine.  If you use NAT to the NIC of the Virtual Machine, then you need to set Port Forwarding in the virtual network Editor.

  Note: The virtual network Editor is not installed by default in Vmware Player 3.x and later versions.

  ==========

  To install the missing virtual network Editor, the command prompt:

  VMware-player-*.exe -e c:\vmptmp
  

  Then in the c:\vmptmp folder find the file c:\vmptmp\network.cab and extract (double-click on the .cab file) vmnetcfg.exe (virtual network editor) file in the working directory of VMware Player usually 'C:\Program VMware Player' or ' C:\Program Files (x 86) \VMware\VMware Player.  You can create a shortcut and place it with the shortcut of VMware Player, if you want to access it more easily.  Note: there are some for all the files to be extracted to then access the network.cab file.

• 4 devices using the same mac address in the ARP Table. Explanation

  Please tell me why four devices connected to the router shares the same mac address was shown on the arp table? I know this has to do with the firewall and owner of listening devices, but why all using the same mac address instead of him? I'm trying to understand this scenerio. Please advice.

  Internet 16x.1x.2x.1x - 0050.5486.5f60 ARPA Ethernet0/0

  Internet 16x.1x.2x.1x 1 0040.1017.2d64 ARPA Ethernet0/0

  Internet 16x.1x.2x.1x 11 0040.1017.2d64 ARPA Ethernet0/0

  Internet 16x.1x.2x.2x 216 0040.1017.2d64 ARPA Ethernet0/0

  Internet 16x.1x.2x.2x 88 0040.1017.2d64 ARPA Ethernet0/0

  Internet 16x.1x.2x.2x 166 0040.1017.2d64 ARPA Ethernet0/0

  No problem at all... I guess she gave us the opportunity to learn that a little on the proxy-ARP and the potential for problems, it can cause.

  Paresh

• Can I use Firefox to connect to an active web device using only its IP address?

  I can type the IP address in the URL instead of a URL field?

  Yes, you can use the IP or the resolved domain name. An address using IP directly would bypass the DNS problems. The device would need a static IP instead of a dynamic IP address, however, or you need to update from time to time.

• I decided to change to a fixed IP address, but I was told to check first our intruder devices

  original title * search for the intruder

  Hello, in the last month, we have every time new problems of sending e-mails with attachments, particularly to the Hotmail and G-mail accounts. The emails simply cannot, without any error message. Reason is that I think that we are on the blacklist every time again. I decided to change to a fixed IP address, but I was told to check first our intruder devices that can use our computers. My question is: How can I do this?

  Hi HelenPeterse,

  Thanks for posting your query on the Microsoft Community.

  Are you still facing the question to send Emails?

  1) go to your user accounts and see if there is all unknown accounts that are administrator. If so, delete the accounts. Make sure that you have an administrator account that you created and change the password if you are the only person who knows the password.
  Then, remove all the accounts that you are not familiar with or don't want on your computer. Do not remove a network Service or Local Service account.
  Do not delete the account administrator, or system or comments. However, you can disable the guest account.

  (2) change your passwords every day until you know you're is more compromised.

  (3) right click on the taskbar and open the tasks to the top manager. Go to the users tab. There you can see if there are other users logged on to your computer. If you are not familiar with users, select the account and disconnect the user.

  (4) get your computer course before you go out on the internet. Only to connect to the internet when necessary. You can disable your router if you are not on your computer.
  If you use wireless, make sure that you use the most secure authentication type.
  Change the passwords on routers as most ships with a password. Change the router password so that no one else has the password. Check with the documentation for the router on how to change your password.

  Hope this information helps and if you have interviewed more associated with Windows do not hesitate to post on Microsoft Community we will be happy to help you.

• Using VMWare Studio 2.6.0 to manage virtual machines on a host ESXi 4.1.0

  Hi all

  I'm having a problem connecting to our 4.1.0 ESXi host using VMWare Studio 2.6.0 (and it is quite possible that the problem is that I'm badly understand what VMWare Studio is supposed to provide). What I would do is create/configure/manage the virtual machines on our ESXi server from within Eclipse, similar to what I can do with vSphere client. However, when I open the Explorer of VMware Studio and try to set up the connection, I still get the error message "Connection to xxx.xxx.xxx failed. Difficulty of connection settings and try again or cancel. "I use the default port of 5480 number and the same references that I use in the vSphere client.

  So, my questions are: I use the incorrect port number? I am using a configuration that is known not only not for work (ESXi 4.1.0 + VMWare Studio 2.6.0)? Or am I completely misunderstanding what VMWare Studio and is not?

  Please specify!

  I think you misunderstand what did the Studio. It's simply a VM construction kit. Once created, the OVF Studio is out of the picture. He does, eventually, put some components in the virtual machine to manage addresses network, proxies, updates, etc. but above all, he was only VMs.

  The Eclipse of Studio plugin is simply another user interface in the Studio build system and will work only if it points to a Studio running. It will not serve the goal of the vSphere client.

• What is the use of Vmware vcenter device? and when it can be used? is it free?

  Hi guys - when can we see VMware vcenter device an option? Is it free?

  Is that it is contemporary with the linux version of VMware vcenter windows version with Sql express?

  When we use this? Why not to choose windows VMware Vcenter license version if it is available for free? (up to max. 5 hosts and VM 50 s for how long we can use this in our environment)

  Kind regards

  Abhishek Singh

  According to me, there's no difference between vCenter through windows & device licenses.

  You will get vCenter license (as a whole) and now its your choice to deploy vCenter either on windows or deploy the same form of appliance. Once deployed, you must apply the license.

  If you opt for the vCenter Foundation, you will get the same set of features you deploy the VC under windows or as an appliance. It is the same for the standard vCenter license. If you deploy on windows, you need windows license as well.

  Reference: purchase of VMware vCenter Server: virtualization systems management | United States

  Let me know if you need any clarification

• The use of StudioCLI to import EGGS/OVF in VMware Studio

  Greetings,

  I wonder if I can import Windows OVA/OVF file in VMware Studio using 'studiocli '?

  root@Studio:/mnt/NFS/OVF/win2k8r2# studiocli - I file:///mnt/nfs/ovf/win2k8r2/winserver81/winserver81.ovf win2k8r2x64 - N - verbose

  To help build the instance name: winserver81.1

  VMware Studio version - 2.0.0.1017 build 185256

  Description - VMware Studio 2.0.0

  Import of VM in Studio...

  Download file:///mnt/nfs/ovf/win2k8r2/winserver81/winserver81.ovf...

  file:///opt/VMware/www/build/winserver81.1/exports/ovf/winserver81.ovf download and conversion to vmx...

  WARNING: cannot find the partition root or boot disk system folder. Please ensure that the operating system is installed

  WARNING: unable to mount the file system drive, so could not create profile

  WARNING: Studio cannot create profile generation of vm

  Failed: Studio could not download the VM or profile

  Cleaning of... Deleting the temporary files.

  I went through the discussion and someone said that currently only currently manage the ext3 file system studiocli. If this is true, is there another way I can import Windows VMware Studio VMS?

  Thank you very much in advance!

  Alex

  Please try after command for your virtual machine with the option of profile-. But make sure that vmdk files should be present in the same directory.

  studiocli - I /root/Win2k8.ovf--profil /opt/vmware/etc/build/templates/windows/2008/x86/build_profile.xml n NewVMName

  for example, studiocli - I /opt/vmware/www/build/Windows.1/exports/ovf/Windows_vApp.ovf--profil /opt/vmware/etc/build/templates/windows/2008/x86/build_profile.xml n win2k8_2

• ABANDONED (VMware Studio: Feature requests / user wish list)

  DISCONTINUED
  NO UPDATE WILL HAPPEN TO THIS POST MORE!
  I HAVEN'T THE TIME MORE to DO.

  -------------------------------------------------------------------------------------------------------------------------------------------

  Hello

  I start this thread to catch all the useful features we want for a new version of VMware Studio

  VMware Studio is a great tool and becomes better and better and I think it is important to

  go back to the developers...

  The current will for the next version ( after v2.6 ) is:

  (this thread post will be updated when new FRs coming)

  P1 = highest priority-> 'very important '.

  ....

  P4 = lowest priority--> "nice to have".

  P1 (the order within this group is random)

  • EN #004 = > update to a specific version number! ("vamicli update - install ' can handle only"later"")

  • EN #012 = > removing instance in the interface of Studio user must check if there is a build in use that uses this instance as starting point (see: http://communities.vmware.com/message/1591910#1591910 - number 02)

  • EN #014 = > instance count should be specific to a profile (each profile starts an instance own counts) (see http://communities.vmware.com/message/1594279#1594279)

  • EN #019 = > support multi-core for the build process (see: http://communities.vmware.com/message/1606373#1606373)

  • EN #029 = > update-deposit only without the need to build the whole VM (http://communities.vmware.com/message/2064155#2064155)

  • EN #030 = > linux: Support for Ubuntu 12.04 LTS - 64 bit ( )http://communities.vmware.com/message/2130452#2130452 and http://communities.vmware.com/thread/400325?tstart=0( )

  P2 (the order within this group is random)

  • EN #006 = > possibility of several repositories for updates on customer site (e.g., an operating system, one for applications etc..)

• EN #009 = > additional scripts running before launching studiocli (see: http://communities.vmware.com/message/1590658#1590658)

• EN #020 = > studio: "studiocli - newos" command should be more resistant (see: http://communities.vmware.com/message/1550502#1550502 and http://communities.vmware.com/message/1611736#1611736 and http://communities.vmware.com/blogs/vmwarestudio/2010/09/27/adding-new-os-support-ubuntu-10041-server-i386)

• EN #022 = > web gui/console: improve the proxy settings in the user interface of VMware and the dialog box (modify network settings) console (see: http://communities.vmware.com/message/1618697#1618697 )
• EN #024 = > enable the use of the ISO image of windows custom (see: http://communities.vmware.com/message/1682344#1682344 and http://communities.vmware.com/thread/299596?tstart=0 and http://communities.vmware.com/message/1683960#1683960)
• EN #026 = > Bug in the UI of VMware Web proxy settings (see: http://communities.vmware.com/message/1683210#1683210)
• EN #031 = > linux: supported for Debian Squeeze 6 - 64 bit
• EN #032 = > studio: VAMI update to manage special characters (see http://communities.vmware.com/message/2097433#2097433( )
• EN #033 = > studio: update password encryption (see http://communities.vmware.com/message/2097433#2097433( )

P3 (the order within this group is random)

• EN #013 = > add a ' disk space info-box "in the Studio at the top of the Studio Web Interface

  • window Info: display the available disk space and to update every 5 minutes and after each build process

  • Info box: turns yellow (warning) when less than XX MB of free space available to build Studio

  • Info box: turns red when (critical) less XX MB available to build Studio space

• EN #021 = > Installation with several ISO is not possible because you can use a single ISO file in the profile atm (see: http://communities.vmware.com/message/1612052#1612052)

• EN #025 = > VM created by ESX server cannot be seen and used by studio to build a paralytic (see: http://communities.vmware.com/message/1682344#1682344)
• EN #027 = > more usability to Studio GUI (http://communities.vmware.com/message/1698671#1698671)
• EN #028 = > best VAMI Service handling in the Studio GUI (see: http://communities.vmware.com/thread/302382?tstart=0 ( )
• EN #015 = > instance count must be permanently even when you remove one instance (behavior in the Studio v1) but give the ability to reset the counter for a specific profile (see http://communities.vmware.com/message/1594279#1594279)

P4 (the order within this group is random)

• EN #003 = > Linux: prevent cloning / copy of a VM (more or less matter of license in order to avoid the misuse of a trade device)

• EN #005 = > linux: separate a/var partition support in the build process

• EN #001 = > edit the "starting point" of a profile in the Web UI

Feel free to add your ideas about this or

Send them to me by PM

(I will update this post when get a new FRs/wishes)

Concerning

Thomas

|

|

|

|

-changes to this post of thread-

2013-04-03: stop the message playback

2012-10-15: back EN #030 at P1, moved down EN #001, EN #003, 005 # EN to P4 and EN #015 P3 and EN #007 solved

2012-08-20: added EN #032 and EN #033

2012-06-20: the resolved issues moved down, added FR #029, 030 # and #031

2011-02-21: added EN #028

2011-02-14: added EN #027

2011-02-10: changed some info text

2011-01-21: change the priority of EN #023, added new links to EN #024, EN #010, EN # 011

2011-01-20: added EN #023, 024 # EN, EN #025 026 # EN

2010-10-31: changed thread

2010-09-28: EN #022, added new link to EN #020

2010-09-21: added EN #021

2010-09-17: added EN #020, changed FR #011 prio

2010-09-08: added EN #019

2010-09-06: added EN #018

2010-08-27: added EN #017, EN #016

2010-08-20: EN #015, added FR #014

2010-08-19: added EN #013

2010-08-18: EN #012 added added EN #011, added FR #010, rejected EN #007

2010-08-17: addition of priorities for all the wishes, EN numbering for a better view of all communication, added FR #004, added FR #009

-issues-

• EN #007 = > linux: the value of hostname in console UI (already available in 2.1)

• EN #008 = > extensible VMware Studio do!

• EN #002 = > linux: integration of LVM2 to be more flexible in the disk hard sizing

• EN #023 = > support for Windows server 2008 R2 (see: http://communities.vmware.com/message/1682344#1682344 and http://communities.vmware.com/message/1612579#1612579)

• EN #010 = > linux: Support for Ubuntu 10.04 LTS - 32 bit (see: http://communities.vmware.com/community/vmtn/vam/studio/blog/tags/10.04 and http://communities.vmware.com/community/vmtn/vam/studio/blog/tags/10.04.1 and http://communities.vmware.com/community/vmtn/vam/studio/blog/2010/10/05/adding-new-os-support-ubuntu-10041-server-i386)
  

• EN #011 = > linux: Support for Ubuntu 10.04 LTS - 64 bit (see: http://communities.vmware.com/thread/289033?tstart=0 and http://communities.vmware.com/message/1612579#1612579 and links in regards to the EN #010)

• EN #016 = > interface console: control problem of validity for the network configuration (the validity is checked only rudimentary, because what follows is not a mistake (see screenshot)):

• EN #017 = > Studio GUI, GUI from VMware: Support for browser Chrome (Google)
  

• EN #018 = > allow more characters in the instance ID naming. At present, only 11 characters are used. (see: http://communities.vmware.com/message/1604659#1604659 )

You were talking to the blue login screen on the console vm? Which also also allows hostname setting when you choose to configure a static IP address under configure the network. Definition for DHCP host name is not a supported use case.

• m276n: print from a mobile device using a wired connection on the printer

  Hello

  I am considering buying the printer m276n for use in the home. I have a small Home Office on the top floor of my house which is out of range of my wifi signal but has a wired connection to the same router that broadcasts the wifi signal. I want to put the printer and connect it via a wired connection to the network. I know that it works perfectly for all windows home computers that are attached to the same network (wired and wireless), as long as I give you a fixed IP address to the printer.

  But since we use mobile devices more and more (apple and android) it will be a nice to have to print those as well. I watched Eprint Airprint movies, but all tell me that the printer must be connected wireless. Is it a necessity or my proposed wired installation will work just as well?

  Hi @MartijnS ,

  I see by your post that you would like to know if you can use the ePrint Airprint functionality with the printer and when it is configured on the network via an Ethernet connection. I can certainly help you.

  The ePrint and Airprint feature work when a printer is connected to a network. It can be wired or wireless to the router.

  Here is the document with a little information for print from an Apple Mobile Device.

  The documentation shows also wireless, but again, it works through a wired too.

  I hope this helps.

  Have a great day!
  Thank you.

• VMWare Studio is stuck with the transitional VM does not complete the PostInstall script.

  Hello

  I ran into a situation where the Studio VM got stuck with the post-installation script control that went wrong. The failure is shown in the Studio hanging as shown below.

  Build-a-failed/hung:

  2009-11-30 10:57:29 more than 30 minutes are elapsed during the configuration of the virtual machine.

  2009-11-30 10:57:29 if there is an abnormally long time to commissioning of your virtual machine

  2009-11-30 10:57:29 to complete, please check that the construction is progressing

  2009-11-30 10:57:29 observing the < 192.168.122.75 > console of the virtual machine being put into service.

  2009-11-30 11:28:06 more than 30 minutes are elapsed during the configuration of the virtual machine.

  2009-11-30 11:28:06 if there is an abnormally long time to commissioning of your virtual machine

  2009-11-30 11:28:06 to complete, please check that the construction is progressing

  2009-11-30 11:28:06 observing the < 192.168.122.75 > console of the virtual machine being put into service.

  What's happened is that the transitional VM has restarted before the post-installation script came out. However, in the past, I had noticed that the VM Studio that recognizes and cleans. In this case, there no cleaning. A previous generation succeeded as shown below. My question is if there is any command the virtual machine of comments/provisional, which 'determine' the completion of the Post-Install, so the Virtual Studio machine can pick up and transfer/package the bits of the vmdk disk images and give me a successful build? I know that all the elements of post-installation script had been completed successfully.

  If the build was successful:

  2009-11-30 05:01:41 if there is an abnormally long time to commissioning of your virtual machine

  2009-11-30 05:01:41 to complete, please check that the construction is progressing

  2009-11-30 05:01:41 observing the < 192.168.122.75 > console of the virtual machine being put into service.

  2009-11-30 05:18:11 the transient VM is now in offline mode. Post-OS Setup log file recovery...

  2009-11-30 05:18:11 installation is complete.

  2009-11-30 05:18:11 post-OS installation error checking...

  2009-11-30 05:18:12 VM carrying host provisioning to Studio; This may take a few minutes...

  2009-11-30 05:53:15 provisioning host cleaning...

  2009-11-30 05:53:15 checking if provisioning session is still alive and the transient virtual machine is always on.

  2009-11-30 05:53:36 Unregistering transitional VM configuration host.

  2009-11-30 05:53:36 remove transitional VM configuration host.

  2009-11-30 05:53:38 the development of the virtual machine.

  2009-11-30 05:53:38 packaging of the virtual machine.

  In the normal flow, you shouldn't have to do something special for "cessation of distribution".  The VM output should be in/opt/vmware/www/build / < instance-bld > / export dir in the VM Studio when using Studio to build a W2K8 device without your installed application. The Studio build process is now out of the picture. You can then copy or import the virtual machine to your platform of choice virtualization, power, install your application, closing. And copy (or distribute) the VM whenever you want.

• How to increase the size of the disk partition VMware Studio.

  Hello

  I installed the VMWare Studio unit on ESX 4.0 host system. I've been running more disk space for builds, so I wanted to provide more space for the SCSI in ESX, Edit-settings of the Virtual Appliance. I increased the size to 256 GB SCSI disk.

  I then went to the guest VMWare Studio system, and the device/dev/sda5 displays always only 30 GB, and 12 GB is exhausted. How can I make the Guest OS from VMWare Studio unit see the increase in size?

  I tried to use "parted", but this fails because/dev/sda5 is mounted. "' I can't umount/dev/sda5 as/dev/sda5" is ongoing. " I am aware of the 1004047 of the Knowledge Base article, but it is of no use, because is not specifically for VMWare Studio unit.

  Thank you.

  If you have a lot of disk space on the ESX Server, yes creating and adding a new virtual disk (vmdk) to the VM Studio is the way to go. Mount the new drive for the Studio colleagues OS (Ubuntu), and the key is/opt/vmware/www/build simple installation on the new disk to create the new space drive for Studio use. Don't forget to back up your existing data in this directory first. See http://communities.vmware.com/thread/244715?tstart=0 for the similar explanation. Let us know how it goes.

• New installation of OME 2.2 lists all the names of devices such as rfc.private.address.invalid.query

  Hi all

  Really hope someone can help with this. I just do a fresh install of OME 2.2 including the fix on a sweet victory 2012 R2 Std VM without updates. When I perform the usual out-of-band and SNMP discovery all my devices are listed with the names of device 'rfc.private.address.invalid.query '. This second generation on this site as I feared that Windows updates (previous installation has been patched) had caused the problem, but I got the same results.

  I have FX2 chassis (CMC Firmware 1.40) with blades FC630 (iDRAC 2.40.40.40), Compellent storage and N4064F switches. I have all the devices record correctly but all with the same "Device Name" as "rfc.private.address.invalid.query". This isn't my first installation of OME, so I am quite confused as to why this is happening? The site in question uses Cisco Nexus 9 k switching so do not know if there are potential problems out there?

  I also looked at the link below:

  

  Thanks in advance for all you can give me advice!

  Best regards

  Victor

  Hi, thanks for the request.

  Another thing to check is the DNS server, if it is to have entries appropriate for your devices. If you do not use / configure the domain name, and then try to opt for the method of NetBIOS name resolution in OME. To do this, go to "manage-> discovery and inventory--> tasks--> discovery common calendar" and select "NetBIOS" for name resolution.

  

  We know results.

• Fixed ip address but no domain name

  You can configure a server that is not intended to host a Web site, but only a few features such as sharing files, ftp, calendar, etc., with only a fixed IP address? If Yes, what is the simplest step by step through OS x.app for el Capitan?

  The short answer is: Yes you can! However, do not use the local point in your full domain name as it is reserved for the Hello. I would also advice against the use of the private area of dot, but rather to get and use a registered domain space. The reasoning behind it: you may change your mind later, normally sooner rather than later!

  Now for the nitty gritty: there are several excellent resources available on the net and in the App Store.

  I will quote a couple for you:

  http://krypted.com/guides/El-Capitan-Server/ by Charles Edge , who is also the author of a few very good books

  I highly recommend the three books by Reid Bondonis available on the App Store for El Capitan. They are worth every penny.

  Then there's the series of video tutorials by Todd Olthoff at http://www.toddolthoff.com/technology/ECS10.11.html

  In addition, directly from Apple, you can and should https://help.apple.com/serverapp/mac/5.1/#/apd6015d9573 for a lot of information.

  Finally, last but not least there are a multitude of resources available to Apple - Support - manuals

  HTH

  Leo

• Can I delete my old Firefox sync account if I have a new one that uses the same email address?

  Hello

  I took off all my devices a synchronization of the old account and set up a new synchronization. In this process, I used the same as before email address.
  I have no use of my old account of synchronization, so the question is:
  Can I remove the old account from synchronization (via https://account.services.mozilla.com/ ) and - implicitly - all associated data without affecting my new account of Firefox (and its data) somehow?

  Thank you!

  Even if you use the same email address the two synchronize the old and the new are separated. As long as you are sure that all devices use new synchronization then the old one is no longer necessary.

  Here is the main article for help on the new sync

  • Synchronize your bookmarks Firefox, history, passwords, etc.
    • https://wiki.Mozilla.org/identity/Firefox-accounts
    • The methods used to identify you and to verify the details are quite complicated, with synchronization of the former using coupling codes, as explained in detail in these articles on cryptography in sync
      https://blog.Mozilla.org/Warner/2014/04/02/pairing-problems/
      https://blog.Mozilla.org/Warner/2014/05/23/the-new-sync-protocol/
    • Easier reading on the new sync https://blog.mozilla.org/services/2014/02/07/a-better-firefox-sync/
      And more techie information https://github.com/mozilla/fxa-auth-server/wiki/onepw-protocol
  • This applies to the new sync
    Why can't I synchronize my passwords?
    This is a problem of security and may be overcome in a future version of Firefox or synchronization. It is one of the reasons for some users can stay on the synchronization of the former. Both versions offer slightly different regarding how and what features they will sync.