VMware view with VSA

Similar Questions

• VMware View with mixed processors on hosts

  Hello

  I have a client with an existing vmware view environment. the hosts are of 3 years older AMD servers, which will be replaced in the coming years.

  because of performance, we will move from AMD to Intel.

  We have a picture of office of parent in a floating pool automated with linked clones.

  When you start windows on a new processor architecture, you will receive a message that the hardware has changed a you must restart.

  So the question how it reacts, when using quickprep.

  everyone experiences with that? This working group or failure of deployment process?

  Greetings from vmworld Barcelona

  Ah, I see. Yes, once the Parent virtual machine was launched on the new hardware, the two processors exist in Windows. Windows clean up one old is why it stays in place which prevents the message from appearing again.

  -Mike

• Automation of VMWare View with PCOIP 5.0

  Hello

  I am trying to automate the execution of applications in VMWare View Client (PCOIP). However, I'm stuck with sending the keys to applications. I tried in vain on the keyboard to screen, SendKeys, keyboard hook to this effect. I also read VIX API documentation but I don't think that it works for me because I don't have administrator rights. Please notify.

  Kind regards

  Amjad Ali

  I'm not sure I understand the question either, but I had some success using AutoIT (http://www.autoitscript.com/site/autoit/) for automation in the past. Using this, you can compile a script as an executable to run in the virtual machine.

  If you do not have rights admin on the virtual machine, you can still use the Run value in the registry for the current user to start an application when you connect. Have you tried to put the path to the executable file that you are trying to launch in the HKCU\Software\Microsoft\Windows\CurrentVersion\Run?

  You might be able to use both of these ideas and set the path to an AutoIT executable in the HKCU Run key to get the automation level you are looking for.

  Dave

• VMware VI3, VMware View with Novell eDirectory integration

  Hello

  We are a COMPUTER consulting company and we have a lot of colleges and universities using Novell looking at VMware VI3 and VMware VIew.

  (1) for VMware VI3 tabs of permissions must be able to connect to an LDAP server to Active Directory only.

  (2) for VMware VIew 3, the VMware Agent should be integrated into the Novell Client for Windows...

  We did a little proof of concept with VMware View, and each time that the Novell Client are causing a lot of problems with VMware View Agent. It's bad because these 2 projects has been more than 10000 thin clients. They decided to Citrix XenDesktop used instead.

  It'll be great if you can built your product with the architecture of Novell.

  Best regards

  Eric Champagne

  IT Director

  Adaris Technologies / www.adaris.ca

  Yes, it would be nice

  a question: you say that a decision was made to use XenDesktop: are you still using VMware VI3? or XenServer?

  Jose

• Is it wise to use VMware View with Citrix branch repeater?

  Guys,

  Is it possible to use Citrix branch repeater for VMware View 4.5? Seems that it is not possible or is meaningless, I Googled, but impossible to find clues.

  Thoughts?

  Thank you

  Laughing out loud

  If you want a RODC so make sure you use the branch Repeater, but I guess you want to use it for WAN acceleration.  If so you must keep in mind that Citrix using ICA and the BR which accelerates.  View uses RDP and PCoIP (I hope you use PCoIP) PCoIP is UDP based and a BR who would not help.  Cisco's web acceleration products that could help.  Also, I hope that you will see an Accelerator for PCoIP in 2011.

  -Gunnar

• VMWare View with RSA SecurID integration

  Hi all.

  We try to make VMware View to authenticate users through RSA SecurID according to the attached document. However, it is not clear where to put the node Secret file that is generated on the RSA Authentication Manager server? It is exported in the form of .rec file and is protected by a password, but server configuration view has all fields to load the node secret file. Should I simply rename the securid .rec file and put in %SystemRoot%\System32\securid? But how to do View Server to decrypt this file by using the password then?

  On the RSA server, I see in the newspapers:

  2010-03-12 08:05:49U-

  ---

  /viewservername.company.com-

  ---

  12/03/2010 03:05:49U verification of node doesn't have a rsa - ace - server.company.com

  RSA doc says

  "An incompatibility between the secret of node stored on an authentication manager and subsequently stored on an Agent Host may occur if you delete and re-create an Agent Host, or if you accidentally delete a secret file of the nodes. The incompatibility prevents messages between devices which is decrypted and causes the Agent Host deny access to all users who attempt to log on. Node of that check failed is recorded in the audit trail.

  Hello

  for me it is look like this attached image.

  MCP, VCP

• VMware vs vmware view vs. horizon wdm

  Hi dear friends

  I need to know what is withholding wdm of vmware with vmware view with view horizon (features, tools and technical sheet)

  If there is this a document please show me

  They are essentially the same product, with more recent versions (which contain additional features) coming out under a slightly different name - the order you listed them is also the order of the liberation. VMware VDM has been renamed to VMware View, and when it is included in the Suite of the Horizon, it was changed to Horizon of VMware View. Why do you specifically, the licensing options?

• VMware View is over-equipped?

  Hello!

  Having a small company of VMware View seems MUCH too complicated and overengineered. Can this be true?

  I mean that the alternative is a pWindows machine to connect to a machine vWindows with mstsc.exe. I know it is not completely the same, but it is also very long path between a solution that works out-of-the-box and VMware View with much installation of the client OS, directory servers, see security, view connection server, server transfer from view, the slim viewers, tool view composer and General everything that is necessary to get this working.

  And then it only works for Windows desktop computers. Using something like the console in vSphere client redirection is able to display all the OS' are - even Android!

  (Ok! Forcing my employees to use for their daily work vSphere client would proberbly many resignations ;-)) but I is possible!

  Am I missing something here? I mean VMware-view-evaluators - Guide.pdf is 152 pages (!) - long 'mstsc.exe remoteserver' is just... a line?

  Is there a simple solution for this. It's like building a spaceship to get a Coke to the nearest 7-11. It's 'just' a shutoff Holy crap! :-)

  Best regards

  -Green Morten Hermansen

  Don't forget when you are dealing with 10-50 VM that is not for to be honest.

  You see a company of 10 or 20 depending on what lines you have you can find a service provider where they can provide you with da (computer desktop as a Service) and which would reduce as much cost

  I did a small deployment without costly storage and costly servers and the system worked well.

  Then give the user a Zero-Client and boom!

• The simplest configuration of vmware view?

  Good evening

  We have a small project with 5 desktop computers (= Users) and we think that it would be a good place to test VMware View.

  Unfortunately, it seems that we must implement the 4 servers to serve 5 customers:

  • See connection to the server
    
  • VMWare vCenter Server with View Composer
    
  • ESX Server
    
  • View transfer server
    

  What is the most simple and functional solution for VMware View with 5 users?

  The only software they use is a simple accounting tool that works very well with 100 k of memory...

  We hope that we can install a simple solution like this:

  HP (server) hardware with:

  • ESX Server with:
    
    • 1 x Windows 2008 R2 with Active Directory and the file server
      
    • 1 x Windows 2008 R2 with VMWare View to serve the 5 office users
      

  Unfortunately, there are no pre-sales VMware does support form / email (we hope that there is a customer support).

  Therefore, it would be great if someone can help us to answer this question.

  Thank you very much in advance,

  Kind regards

  Thomas

  I also wonder how this bake-off will go. I hope that the victories of view! In order to achieve this please take a good look at the documentation of the view. I also highly recommend that you take a look at the guide to optimize Windows 7 to see: http://www.vmware.com/files/pdf/VMware-View-OptimizationGuideWindows7-EN.pdf

  This will show you how to build a good image of Win 7 basis for review. Also note that it is strongly recommended that you build your base images starting from zero and NOT P2V them. You can quickly and easily build images for operating systems Windows using MDT 2010 update 1. This tool is free and is Microsoft. I strongly recommend that you take a look. In addition, many optimizations for Win7 and view are also good for use with Xen. Good luck.

• VMware View 4 - PCoIP - scanning is very slow

  When you scan from a USB scanner from a heavy client without VDI, it takes 7 seconds. When you use VMware View with PCoIP 4.0, it takes 52 seconds.

  Any suggestions?

  Rgds

  M

  I sent an email to teradici support and they checked the speed was closer to the USB 1.1 instead of 2.0.   If you PM me your email I'll send you the conversation

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• VMWare View vs. VMWare VDM2

  I have looked in VMWare View but can't find any documentation online about the benefits of VDM view.

  Can someone point me in the right direction.

  Thank you, John

  I would recommend the release notes for VMWare View with this link.

  http://www.brianmadden.com/blogs/brianmadden/archive/2008/12/02/VMware-releases-their-new-VDI-product-view-3-here-s-a-60-second-overview.aspx

  Mike

• ThinPro with VMware View USB Redirection

  Hi all:

  I'm trying to configure my workstation (t620 ThinPro 5.1 running) to start required services necessary for USB with VMware View forwarding at startup.  I tried to add the command to /etc/rc.local and created my own init.d script, but none of these options automatically launch services.  Run manually /etc/rc.local and the custom init.d script launches the services successfully.

  Has someone managed to get the necessary USB redirection services running at the start?  Any guidance is appreciated.

  Thank you.

  Solved my problem... changed under USB Manager Remote Protocol of VMware View.  Updated this setting caused VMware services to run at startup.

• VMWARE HORIZION VIEW 6.0: it does not serve any which RDS (using PCoIP) session to my zero Teradici Clients but it works with Horizon of VMware View client 3.0.0 from my computer

  Hi all

  I'm testing view Horizon 6.0 Service sessions (Windows 2008 R2) RDS through PCoIP. I think that my setup is just because I can connect via Horizion View Client (installed in my laptop or my Android smartphone). But when I try to connect from a Client Tera zero, 1 or 2 (with the latest firmware), at the same time I did logon, I still have this error:

  "View server connection has no return of available virtual desktops."

  Could someone tell what can be wrong?

  Concerning

  As a result of this discussion "Re: RDS support is included in Vmware View (broker)?" I saw that I must spend my customers zero to 4.5.1 firmware. Once I did, Tera 2 Zero Clients work very well but do not have customers zero 1 Tera.

  I expect response from Teradici.

  Concerning

• VMware VIew 5.3 with SQL 2008 R2 Express

  Hello world!

  I'm about to deploy VMware View 5.3.

  I'll use a linked clone pool with 100 workstations.

  Can I use SQL 2008 R2 Express X 64 for the composer?

  Y at - there any restrictions I can find in the future?

  Oh, I give bad link VMware View the database to screen sizing & #187; myvirtualcloud.net . Yes, he should be allowed to use Express even for 100 clones, but only for the View Composer database. AFAIK it is recommended not to use SQL Express for vCenter database if you want to run more than 50 virtual machines, BUT it is old recommendation and with the current SQL Express limited 10 GB and 1 CPU or 4 cores, you can also use it to vCenter database I think.

• Problems with the module supplier of personalized identification information and overview of VMware View Client working together

  I have a Horizon of VMware View client that connects me HVD Windows 7. So when I give view client Vmware Horizon my credentials, it auto logs me. I also created a custom credential provider that works on Windows 7 PC. When I install the custom in the HVD credentials provider, it works if I am already connected to HVD and I simulate CTRL + ALT + DELETE. Can I use my credential provider to "unlock" in. However, if I disconnect of HVD and try to connect using VMware Horizon View client to connect to Windows 7 of HVD, it gets stuck on the screen of the tile. I see the VMware SSO user tile but nothing happens when I click it. Then, I use my provider of customized credentials to connect. I expect to bypass my ISP credentials on the first connection and self as before.

  Anyone have any ideas?

  Thanks for your help.

  OK, I did some more troubleshooting and discovered that it was a problem with auto connection set to TRUE on my side of custom credentials provider (I pbAutoLogonWithDefault to TRUE). Since I still like it TRUE, I had originally set it to FALSE and then change for REAL once my credential provider was used.

  Thank you!