VMware View 4 - PCoIP - scanning is very slow

Similar Questions

• Automation of VMWare View with PCOIP 5.0

  Hello

  I am trying to automate the execution of applications in VMWare View Client (PCOIP). However, I'm stuck with sending the keys to applications. I tried in vain on the keyboard to screen, SendKeys, keyboard hook to this effect. I also read VIX API documentation but I don't think that it works for me because I don't have administrator rights. Please notify.

  Kind regards

  Amjad Ali

  I'm not sure I understand the question either, but I had some success using AutoIT (http://www.autoitscript.com/site/autoit/) for automation in the past. Using this, you can compile a script as an executable to run in the virtual machine.

  If you do not have rights admin on the virtual machine, you can still use the Run value in the registry for the current user to start an application when you connect. Have you tried to put the path to the executable file that you are trying to launch in the HKCU\Software\Microsoft\Windows\CurrentVersion\Run?

  You might be able to use both of these ideas and set the path to an AutoIT executable in the HKCU Run key to get the automation level you are looking for.

  Dave

• VMware View 5 PCoIP get a black screen on wide AREA network

  Hello community,

  I got a VMware View 5 Infrastructure with a vCenter Server, a connectionserver of view and some clients such as VMs.

  Internally, everything works - connections PCoIP and RDP do their job very well.

  Know that we want to publish the vDesktops over the WAN. Users must connect to the virtual machines in their laptops or iPad (or iPhone) at home. So, we have configured our firewall to open the IP Wan (194.209.166.xy) to the internal IP (192.168.199.xy). A DNS entry for view.xy.com shows the IP WAN. If the WAN connection to infrastructure display RDP works - but PCoIP connections shows a black screen after 10 to 30 seconds after logon. We never see an interaction of oder break Windows. The screen is black after the logoninformations in the client view.

  We have configured the connectionserver display settings as described in some articles here... 7

  The external url HTTPS: https://view.xy.com

  checkbox activ: tunnel connection secure user desktop

  PCoIP external url: 194.209.166.xy:4172

  checkbox activ: use pcoip gateway secure for pcoip Desktop connections

  We have forgotten to do some settings or is it an another workaround to work with PCoIP over the WAN?

  Kind regards

  Freddie

  Cross video related to the above article. It describes exactly the configuration you are working. If you have any questions on this subject, let us know and someone on this forum will help you.

  Select this option.

• Satellite P300D - 15 c - software of 3D scanning is very slow

  Hi I am using scanning software 3d (www.david-laserscanner.com) on my Satellite P300D - 15 c with Vista.

  When I use the selection tool in the 3d window, it becomes very slow. It takes like 20 seconds to select a shape.
  When I run the program in windows safe mode, it goes quickly without any problems.

  I installed the latest drivers for my card video (ATI Mobility Radeon HD 3650), but it does not help.

  What could be the problem and what the solution?
  Lemman

  Hi Lemman,

  I think that this problem has nothing to do with Toshiba and it s in the wrong place for this question here... I would recommend contacting the manufacture of this scanning software. Maybe it s a known issue and they can help you in a few minutes

  The only thing you can do is to reinstall Windows using the factory settings. If the problem exists, you must contact the manufacture.

  Good luck! :)

• Test environment for VMware View 7 - PCoIP Protocol does not work properly

  We test VMware View 7 with as many Thin Clients and customers zero (Teradici)

  When we try to connect via RDP Protocol, it works fine. When we try to connect via the PCoIP Protocol, desktop display seems to blink (about 2 times per second) and display resolution is not acceptable. So, there is a problem with the Protocol (broker or Office VM)

  There are no firewall in the middle.

  Desktop virtual has a clean install.

  So... anyone have the same number? or similar?

  How much video Ram?

  You can increase the video Ram.

• VMware VIew 6 (PCOIP): Windows Client and web browser connects, Android and Ubuntu - don't

  Hello colleagues!

  VMware Horizon Client 3.4.0 build-2769709

  VMware View 6.1.1 construction-2769403

  VMware vSphere 6.0.0 2776511

  That's what's wrong: used SecurityServer and connecting to the server. External connection - via a router. When it is connected to a vmware PCOIP Protocol (Internet) outside of the view with a Windows client and a web browser, it works fine. But when connecting from Android or Linux (Ubuntu 14) load the desktop does not occur. Android immediately displays the message 'connection to server lost', Ubuntu delivers all messages - I'll be back on the screen to select a pool table.

  Which connection via MS RDP connection protocol is correctly to all customers.

  In the settings ConnectionServer in PCOIP Security Gateway set up the external address of the router.

  Redirect them router ports:

  -TCP 80,443,8443,4172,32111

  -UDP 4172,32111

  Any ideas?

  In security settings server in 'URL of PCOIP' was FQDN, but it must be the IP address.

• VMware view connection failed with status 502 code

  2014 01-20 T 12: 14:40.545 - 03:00 INFO (1248-128 C) < 4748 > [MessageFrameWork] program "wswc - VMware View Client" started, version = 5.4.0 build-1219906, pid = 0 x 1248, buildtype = release, usethread = 1, closeafterwrite = 0

  2014 01-20 T 12: 14:40.576 - 03:00 (1248-1080) INFO < logloaded > [MessageFrameWork] Plugin "wswc_command - VMware View Manager of server connection commands" load, version = 5.4.0 build-1219906, buildtype = output

  2014 01-20 T 12: 14:40.576 - 03:00 INFO (1248-0F68) < logloaded > [MessageFrameWork] 'wswc_http - VMware View Client HTTP Handler' Plugin loaded, version = 5.4.0 build-1219906, buildtype = output

  2014 01-20 T 12: 14:40.576 - 03:00 INFO (1248 - 16 B 4) < logloaded > [MessageFrameWork] 'wswc_pcoip - VMware View Client PCoIP Interaction Handler' Plugin support, version = 5.4.0 build-1219906, buildtype = output

  2014 01-20 T 12: 14:40.576 - 03:00 INFO (1248 - 16 B 8) < logloaded > [MessageFrameWork] "wswc_rdp - VMware View RDP Manager" Plugin support, version = 5.4.0 build-1219906, buildtype = output

  2014 01-20 T 12: 14:40.592 - 03:00 INFO (1248-16BC) < logloaded > [MessageFrameWork] "wswc_tunnel - Secure Tunnel of VMware View Client" Plugin loaded, version = 5.4.0 build-1219906, buildtype = output

  2014 01-20 T 12: 14:40.592 - 03:00 (1248-1698) INFO < logloaded > [MessageFrameWork] 'wswc_rsa - VMware View Manager RSA' Plugin support, version = 5.4.0 build-1219906, buildtype = output

  2014 01-20 T 12: 14:40.592 - 03:00 INFO (1248-062 C) < logloaded > [MessageFrameWork] Plugin "wswc_ui - Manager of user interface of the VMware View Client", version = 5.4.0 build-1219906, buildtype = output

  2014 01-20 T 12: 14:40.592 - 03:00 INFO (1248-07F8) < logloaded > [MessageFrameWork] 'wssm_uimanager - VMware View Host UI Framework' Plugin loaded, version = 5.4.0 build-1219906, buildtype = output

  2014 01-20 T 12: 14:40.592 - 03:00 INFO (1248 - B 17, 0) < logloaded > [MessageFrameWork] Plugin 'ws_winauth - support for VMware View infrastructure Windows Authentication' support, version = 5.4.0 build-1219906, buildtype = output

  2014 01-20 T 12: 14:40.592 - 03:00 (1248-128 C) INFO < main Thread > [wswc] Option 'ServerURL' set by GPO

  2014 01-20 T 12: 14:40.592 - 03:00 (1248-128 C) INFO < main Thread > [wswc] Option "Domain_name" set by GPO

  2014 01-20 T 12: 14:40.592 - 03:00 (1248-128 C) INFO < main Thread > [wswc] Option "DesktopLayout" set by GPO

  2014 01-20 T 12: 14:40.592 - 03:00 (1248-128 C) INFO < main Thread > [wswc] Windows Client started

  2014 01-20 T 12: 14:42.919 - 03:00 (1248-1024) < MessageFrameWorkDispatch > [wswc_command] year HTTP error error: status code = 502.

  Use the instructions in this KB: KB VMware: VMware View Client configuration to work around the Internet Explorer proxy settings

• Very slow view using OS x client for Windows 8 RDP

  I'm having a problem of strange performance to help the customer to view for OSX and connecting to a remote desktop in Windows 8. I'm the last side connections to the same remote workstations using a windows on the excellent work of the RDP client and client and server versions. No performance problems. I'm a bit at a loss as to what could be the issue.

  Context menus in Office remote work quickly but running programs, opening and closing of windows, etc. is very slow. No conflicts or hogging on the remote system, nor the client resources. All connections PCOIP or RDP sessions to other workstations (which are all Windows 7) work perfectly without any problems. Any help in troubleshooting is appreciated.

  Hello

  When connecting to the remote with the Protocol RDP of Mac View Client Desktop, it will use the image of high quality as a default value for the connection of the DRC. MS RDC app is a very old application, there is no new version for so long and there are no updates to improve the performance of this specific to the new Windows operating system (Win8/8.1/2012). Perhaps the reason for the performance on Windows 8 with the DRC issue.

  If you are using the RDP protocol client Mac view, please change display settings for the Remote Desktop Connection (RDC) first app. And then reconnect directly remote desktop via IP (without customer view) to check if the performance is somewhat improved.

  Menu at the top of the app DRC: DRC-> preferences-> display

  Try to change some parameters like the attached screenshot shown.

  

  If it works, you can replace the template file RDP for the Mac View Client app with steps below:

  1. download the attached template file ' vmware - view.rdp.

  2. copy and replace the file in the Applications/VMware view Horizon Client/Contents/Resources/vmware-view.rdp

  3. exit view Mac Client app

  4 restart Mac View Client and connect to Windows 8 desktop via RDP Protocol

  Thank you.

• VMWARE HORIZION VIEW 6.0: it does not serve any which RDS (using PCoIP) session to my zero Teradici Clients but it works with Horizon of VMware View client 3.0.0 from my computer

  Hi all

  I'm testing view Horizon 6.0 Service sessions (Windows 2008 R2) RDS through PCoIP. I think that my setup is just because I can connect via Horizion View Client (installed in my laptop or my Android smartphone). But when I try to connect from a Client Tera zero, 1 or 2 (with the latest firmware), at the same time I did logon, I still have this error:

  "View server connection has no return of available virtual desktops."

  Could someone tell what can be wrong?

  Concerning

  As a result of this discussion "Re: RDS support is included in Vmware View (broker)?" I saw that I must spend my customers zero to 4.5.1 firmware. Once I did, Tera 2 Zero Clients work very well but do not have customers zero 1 Tera.

  I expect response from Teradici.

  Concerning

• Problemas con vmware view 4.1 y terminales EVGA 'pcoip '.

  Hola todos,

  I hope to be escuentren very well

  Tengo una consulta en mi tengo vmware virtual center 4.1 entorno y vmware view 4.6

  Estoy put changing Terminal wyse working RDP por q a q el performance pcoip terminals are mucho mejor

  Tengo problemas con some las teminales cuando intentan a1 pcoip an Office Máquinas con esta version of vmware tools "vmware, Inc. product version: 8.3.17.15269, en todas estoy using esta version of officer discovers 4.6.0.366101.

  El problema're q despues el usuario type is the clave para a1 al servidor view appears una pantalla negra como por 5 segundos y despues devuelva has the pantalla inicio donde No. conectamos con el conexion server.

  If yo misma pcoip terminal uso para conectarme a otra Máquina virtual q tiene otra lower vm tools version has the 8.3.17.15269 TR conecta sin problemas. por lo q the diff q veo unica are the vmtools una Máquina a otra... pero todas no is como eso porq I have did a cluster con unas 60 vm con esa version of vm tools. Esto solo pasa con las pcoip terminals porq TR uso una wyse normal con esta version of vm tools 8.3.17.15269 if works

  Saludos,

  Hola Warrenjc

  Te cuento than amendments nosotros y paso el tema esta originado in el orden en what instalan drivers, vmware tools y officer see.

  Well as h. para y no tengas problemas you recommend respetes a raja tabla el orden of deployment of same segun lo indica vmw.

  ES decir.

  1. Instalar the vm.
  2. Instalar vmware tools.
  3. Agent view instalar.

  Fijate if asi you works adecuadamente.

  If haces algun cambio a nivel parches, plots etc, to be replaced by Recomiendan desinstalar todos los compontentes y volver a instalarlos en orden.

  Espero esto resuelva you question.

  Diego Quintana

• VMWare View slow slide windows when you use two monitors

  I am experiencing very slow slide of windows from one monitor to the other when using VMWare View Client. I followed all the documentation on configuring dual monitors in VMWare View and I removed the background images, Windows 7 Setup, configure the video settings for better performance. Not sure if I'm missing something. Help, please.

  Hi Joshua,.

  Here are KB which may help you if you have not seen that.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2010359

  Concerning

  Mohammed

• VMWare View 4.6 PCoIP tunneling problem. UDP is not get tunnel

  
  Hello

  I have the black screen "classic" - question.
  So, when I try to connect to a virtual desktop, I am well auhtenticated, I can select a pool of offices, but once the bureau is launching,
  I just get a black screen and afterawhile it times out.

  I read the manuals, the document http://communities.VMware.com/docs/doc-14974 , written by Mark benson; Watched the video; Checked and re-checked the 3 magic steps;
  Blog reading Sláger, Paul http://paulslager.com/?p=1300 and still I'm stuck. I read the (some the) logs from the login view, view Security Server, View Client and Agent of the view server.
  None of the newspapers I read gave me all significant errors that would have solved this for me. Admitted, 'full' newspapers - trace State, there's a lot that wasn't exactly clear to me.

  I have simplified our mitigation debugging environment to be as follows:

  See connection to the server,
  running on Windows Server 2008 R2 (Datacenter) 64-bit VMware View Server connection 4.6.0 - 366101,.
  Checkboxes for both "Tunnel secure HTTPS: connection to Tunnel secure usage on the desktop" and "PCoIP Secure Gateway: use PCoIP PCoIP Gateway Secure connections to desktop" have been checked.

  View secure server,
  running on Windows Server 2008 R2 (Datacenter) 64-bit VMware View Server Security 4.6.0 - 366101,.
  has been paired with the login server and the two aswell "HTTPS Secure Tunnel: external URL" as "PCoIP Secure Gateway: PCoIP external URL" has been set to a virtual IP address in the firewall external dmz with a dst - nat on the real IP address of the Security Server.

  The reviews are pointing to the virtual IP address of the Server Secure View.

  Since it is not a production environment, I installed a bunch of Wireshark to see traffic;
  I ran traffic snooping on the view connection server, see Security Server, View Client and the virtual desktop connected
  at the same time and have verified that traffic TCP PCoIP on get 4172 port of talked about between my security server host <>client - and the
  securityserver <>- virtual desktop just fine. TCP traffic seems to be in the tunnel. But what bothers me is the wireshark on the virtual office reveals that the virtual office is trying
  to talk subject port 4172 - UDP back directly to my reviews host IP traffic. Because this is not allowed by the firewall, the virtual office propably does not work...

  But all scenarios describe only the Security server could handle all pcoip-traffic with the agent of the view (as shown in the documentation of the Architecture in Figure 5-6), so that no direct connection between the Client of the view and the view Agent is necessary... I can't work. But it is possible, right?

  Any ideas what I could do wrong?

  Help really appreciated.

  It works in the way that you described in your original post. There is no obligation for the virtual office send UDP responses to the client. They will be sent on the Security Server, which will forward them to turn to the customer.

  Something must be configured incorrectly.

  Check very carefully the UDP traffic in your wireshark traces. The client, you should see 4172 TCP for the VIP of your SS. You should then see 4172-UDP to the same VIP. You should see the UDP of SS response to the customer data. The destination for this data answer UDP port must be the source port used for the UDP request. The source for the response data port must be 4172.

  Then check your wireshark SS track. You should see the same customer traffic and you should see a similar PCoIP conversation between the SS and the virtual office. From the virtual desktop, the SS looks like a customer. PCoIP UDP must be sent to the SS, when it is properly configured.

  Client - TCP 4172-> SS - TCP 4172-> Virtual Office

  Customer - UDP 4172-> SS - UDP 4172-> Virtual Office

  Customer<-UDP 4172--="" ss=""><-UDP 4172--="" virtual="" desktop="" (the="" 4172="" here="" is="" src="" port,="" the="" dst="" udp="" port="" will="" be="" the="" source="" port="" of="" the="" udp="" request="" packets="" above)="" 4172--="" virtual="" desktop="" (the="" 4172="" here="" is="" src="" port,="" the="" dst="" udp="" port="" will="" be="" the="" source="" port="" of="" the="" udp="" request="" packets="">

  If you have verified that you can connect to the same virtual desktop with PCoIP then this problem will not be something to do with the virtual office or agent of view etc.

  Check your display settings, network, firewall and NAT.

  Select this option.

• VMware View 4.5 Client slow in WAN

  Hello

  We tested VMware View 4.5 Client in WAN and it seems to be slow.

  Not too big gap between RDP and PCoIP.

  How much bandwidth needed a client VMware View 4.5 normally, a normal desktop, non-multimedia user?

  Thanks Mike,.

  Here are some notes more - in addition to sizing guidelines, it may be wise to adapt some of the PCoIP session variables - see the knowledge base article http://techsupport.teradici.com/ics/support/default.asp?deptID=15164&task=knowledge&questionID=348Teradici.

  In addition, for MPLS to check if the load balancing has been configured for the link?  Per packet load balancing results in fragmented packets that should not be used with PCoIP Protocol.  If you need load balancing MPLS consider using instead the load balancing and the destination.

  If you have not already done so, do not hesitate to ask the team to Teradici - you can send an email to [email protected].

  Stu

  Teradici Systems Engineering

• my computer is very slow and the sound is crackling and move icons on their own i have norton security and scanned and it came with a few flaws, but has not yet sorted

  my computer is very slow especially on the startup sound is crackliing and when you watch videos it jumps a little icons often have moved when I start I have norton security and it did an analysis complete and it came with a few things but has not yet sorted

  Hello

  Try to update norton antivirus defination files and run a full system scan in SafeMode (http://support.microsoft.com/kb/315222).

  I hope this helps.

• View. PEF (Pentax RAW format) files on Surface RT is very slow

  Hello
  View. PEF (Pentax RAW format) files on Surface RT is very slow. It takes about 10-15 seconds to open a file (with the Photos (Metro UI) application files Explorer). It's all simply amazing. I don't really understand why it is so long.
  I don't think that the reason of this problem come from my SD card (SanDisk Extreme Pro UHS-1, 95 MB/s) or my USB cable.
  I tried to change the mode (MSC, PTP) USB on my DSLR (Pentax K-5), but the same problem.
  Is there a solution?
  THX.

  Hello

  If the question is limited to PEF File Format, then you may have to check the size of the images as. PEF files are image format of high resolution that may take more time to load compared to other image formats.