VMware Workstation 10.0.3 on Debian Wheezy compilation error

Similar Questions

• Remote SSH to ESX 4.1 (running in VMWare Workstation) is not possible

  I installed VMware Workstation 7.1 (latest) on Debian 5 (64-bit).  In which I installed ESX 4.1

  I followed the article to allow ROOT access on the server SSH (to ESX) http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 8375637

  However, when I try to access the SSH server on the ESX Server from a remote system (for example my workstation that is on the same network) I get

  "Error (connection refused) network.

  Any ideas on that?

  Dirk

  To allow anyone to use the "Promiscuous" mode:

  # chmod 777  /dev/vmnet*
  # cd /lib/udev/devices
  # mknod vmnet0 c 119 0
  # mknod vmnet1 c 119 1
  # mknod vmnet8 c 119 8
  # chmod 777 vmnet*
  

• installation of vmware workstation 6.5 on windows 10 error

  After you install vmware workstation 6.5 on windows 10 it gets error and restart. Is vmware workstation 6.5 support windows 10? FAILED TO INSTALL. vmware workstation 6.5 on windows 8, 8.1 and 10 support. ALL SUPPORT. I still don't understand...

  VMware Workstation 6.x do not support Windows 10 and will never support Windows 10.

  VMware Workstation 6.x reached "end of support" four years, October 1, 2011: Matrix.pdf product lifecycle

  We produce updates for release until its date of "end of support".  A product may not work properly with host OSes, processors or comments OSes that are not compatible with the product, especially the things that have been published after the date of "end of support".  We put a huge amount of effort to ensure that new hardware and operating systems works with each new major release of VMware Workstation, but we cannot go back and update any previous version of product to add support for all hardware and operating systems more recent.  If we tried to do this, VMware Workstation cost much more that it is today, simply because of the amount of work required to maintain!

  You need to upgrade your installation of VMware Workstation to something more recent, or downgrade your host operating system to a version compatible with VMware Workstation 6.5.

  I hope this helps!

  --

  Darius

• Cannot install VmWare Workstation [index.htm error]

  Greetings and respect, community.

  I'm having a problem installing VMWare Workstation 7 or 8...

  Errors occur before the installation can be performed.

  I enclose the photos.

  During installation, vmware1.jpg comes up with an error.

  When I click Yes or no, vmware2.jpg sometimes... And all I can do is to kill the process...

  Can you assist?

  I deleted TEMP files. I changed the TEMP/TMP by default default path. I did everything that I could find about this error.

  Windows 7 32 bit fully implemented to date.

  Q6600 2.4 GHz Quad Core

  4 GB DD3 Ram

  1 GB nvidia GTS250

  Programs running in the status bar:

  Shadow Defender, FRAPS, Asus GamerOSD, Volumouse, Unlocker Assistant, Nokia Ovi Suite, an Astrology, LightScribe Control Panel program, Realtek HD Audio manager, the Bluetooth Manager, Nvidia settings, software informer, Badoo Desktop 1.6.38, Karen Replicator, Norton DNS, VLC Player [listening mass effect 1 OST], MagicISO Virtual CD/DVD Manager, Comodo Internet Security Premium 5.5, Task Killer, Virtual CD v10, Malwarebytes Antimalware 1.51.2.1300, Sandboxie Control , TuneUp Utilities, power icon [Windows 7], Action Center [Windows 7], the [Windows 7] connection icon, its icon [Windows 7], Auslogics Disk Defrag, Usb Safelly remove, Dropbox, Bittorrent client.

  How I read it, it is rather:

  Setup.exe /s /v "ADDLOCAL = ALL/qn".

  "/Qn" passage to the installer should (hopefully it) bypass the Setup screens and install completely in the background.

  André

• Shared folders compile error - VMware Tools 9.6.0 - Ubuntu 13.10

  I am running Ubuntu 13.10 as a guest in Windows 7 using VMware Workstation 10.0.0.

  When you try to install VMware Tools 9.6.0 I get this compilation error:

  Using 2.6.x kernel build system.
  do: enter the directory "/ tmp/modconfig-wX4US5/vmhgfs-only.
  / usr/bin/make /lib/modules/3.11.0-12-generic/build/include/ - c... SUBDIRS = $PWD SRCROOT = $PWD. \
  MODULEBUILDDIR = modules
  make [1]: Entering directory ' / usr/src/linux-headers-3.11.0-12-generic'
  CC [M] /tmp/modconfig-wX4US5/vmhgfs-only/backdoor.o
  CC [M] /tmp/modconfig-wX4US5/vmhgfs-only/backdoorGcc64.o
  CC [M] /tmp/modconfig-wX4US5/vmhgfs-only/bdhandler.o
  CC [M] /tmp/modconfig-wX4US5/vmhgfs-only/cpName.o
  CC [M] /tmp/modconfig-wX4US5/vmhgfs-only/cpNameLinux.o
  CC [M] /tmp/modconfig-wX4US5/vmhgfs-only/cpNameLite.o
  CC [M] /tmp/modconfig-wX4US5/vmhgfs-only/dentry.o
  CC [M] /tmp/modconfig-wX4US5/vmhgfs-only/dir.o
  CC [M] /tmp/modconfig-wX4US5/vmhgfs-only/file.o
  CC [M] /tmp/modconfig-wX4US5/vmhgfs-only/filesystem.o
  CC [M] /tmp/modconfig-wX4US5/vmhgfs-only/fsutil.o
  CC [M] /tmp/modconfig-wX4US5/vmhgfs-only/hgfsBd.o
  CC [M] /tmp/modconfig-wX4US5/vmhgfs-only/hgfsEscape.o
  CC [M] /tmp/modconfig-wX4US5/vmhgfs-only/hgfsUtil.o
  CC [M] /tmp/modconfig-wX4US5/vmhgfs-only/inode.o
  CC [M] /tmp/modconfig-wX4US5/vmhgfs-only/link.o
  CC [M] /tmp/modconfig-wX4US5/vmhgfs-only/message.o
  CC [M] /tmp/modconfig-wX4US5/vmhgfs-only/module.o
  CC [M] /tmp/modconfig-wX4US5/vmhgfs-only/page.o
  /tmp/modconfig-wX4US5/vmhgfs-only/inode.c: in function 'HgfsPermission ':
  /tmp/modconfig-wX4US5/vmhgfs-only/inode.c:1893:29: error: 'struct dentry' has no member named 'd_count '.
  DCount int = dentry-> d_count;
  ^
  make [2]: * [/ tmp/modconfig-wX4US5/vmhgfs-only/inode.o] error 1
  make [2]: * waiting unfinished...
  make [1]: * [_module_/tmp/modconfig wX4US5/vmhgfs-only] error 2
  make [1]: leaving directory ' / usr/src/linux-headers-3.11.0-12-generic'
  make: * [vmhgfs.ko] error 2
  make: leaving directory ' / tmp/modconfig-wX4US5/vmhgfs-only.

  Any ideas appreciated how overcome this problem.

  Hi, jjohanson

  Sorry for the late reply.

  Please upgrade your WS 10.0.1.

  Concerning

  Xisheng

• Someone at - it support 3D (Gnome3) to work in Debian Wheezy (or Jessie) under 11.0 Workstation?

  When I was running 9.0 Workstation that has not supported 7.x Debian, I was able to get 3D support working by jumping through hoops that is easy to find by a google search (which one on this forum very is there a current guide to enable 3D acceleration in Debian invited?), however, try as I might I can't get the same job under 11.0 Workstation which takes officially supported Debian 7.x.

  If I follow the steps documented, I get to a point where I can run the following command:

  GNOME-shell--replace

  And Gnome3 loads, however, it is less stable, in fact quite unusable, while it has worked flawlessly in WS9.

  I'm assuming that thexserver-xorg-video-vmware driver just doesn't work well with WS11 yet, but that's based on not very much Linux experience (maybe the driver is not the issue?), so I am interested in the thoughts of others. For now I have abandoned this dream.

  Cheers.


  To read the release notes. I just noticed that by reading the notes of 11.1 version.

  3D rendering is not available in some operating systems, if you use the hardware virtual version 11

  If you are upgrading a hardware virtual machine virtual version 10 or 11, you may lose some 3D features in the virtual machine.

  Workaround: operating systems for Windows, VMware Tools upgrade to the latest version, which comes with 11 workstations. For Linux clients, only the following distributions are currently supported for version 11 of virtual hardware:

  • 14.04 of Ubuntu LTS and above
  • 12.04.5 of Ubuntu LTS and above
  • Fedora 20 recent updates and more

  For other Linux distributions and versions, if you plan to use the 3D feature, downgrade the version of the virtual equipment to 10.

  So I lowered my virtual material 10, repeated that the hoop jumps in to re - build the xserver-xorg-video-vmware guy (Debian Wheezy) and now I'm all set.

  I noticed a little backward that Jessie seems to work initially with Hardware version 11, but there are currently only another question which makes using Jessie in VMware is not worth the effort, unless you're willing to cherry pick a few problems upstream and stop more pending.

• VMware workstation 7.1.4 failed on Debian

  Hello

  I'm trying to install VMware-Workstation-Full - 7.1.4 - 385536.x86_64.bundle under the Debian Wheezy (test version).

  I use the linux kernel "3.0.0 - 1-amd64.

  I have patched my kernel to compile the interfaces (with this patch and tutorial)-> http://Weltall.HelioHost.org/WordPress/2011/05/14/running-VMware-Workstation-player-on-Linux-2-6-39-updated/

  Compilation failed for the 'file system blocking'

  Starting VMware services:
  USB VMware arbitrator shall
  Virtual machine monitor makes
  Virtual machine communication interface is
  VM communication interface socket family is
  Block file system failed
  Virtual Ethernet is

  I saw during the compilation of these curious message

  Description: VMware virtual network driver.
  Author: VMware, Inc..
  depends on:
  vermagic: 3.0.0 - 1-amd64 SMP, modversions mod_unload
  ERROR: modinfo: module vmblock is not found
  file name: /lib/modules/3.0.0-1-amd64/misc/vmci.ko
  support: external

  /tmp/vmware-root/modules/vmblock-only/Linux/filesystem.c:348:4: warning: passing of argument 3 of 'kern_path' from incompatible pointer type
  /usr/src/linux-headers-3.0.0-1-common/include/Linux/Namei.h:76:12: Note: expected ' struct path *' but argument is of type ' struct nameidata *'
  /tmp/vmware-root/modules/vmblock-only/Linux/filesystem.c: in function 'FsOpGetSb ':
  /tmp/vmware-root/modules/vmblock-only/Linux/filesystem.c:622:4: error: implicit declaration of function 'get_sb_nodev '.
  /tmp/vmware-root/modules/vmblock-only/Linux/filesystem.c:622:4: warning: return makes pointer from integer without a cast
  /tmp/vmware-root/modules/vmblock-only/Linux/filesystem.c: at the highest level:
  /tmp/vmware-root/modules/vmblock-only/Linux/filesystem.c:48:23: warning: 'FsOpMount' used but never defined
  /tmp/vmware-root/modules/vmblock-only/Linux/filesystem.c:58:12: warning: 'FsOpReadSuper' used but never defined
  /tmp/vmware-root/modules/vmblock-only/Linux/filesystem.c:617:1: warning: 'FsOpGetSb' defined but not used
  make [4]: * [/ tmp/vmware-root/modules/vmblock-only/linux/filesystem.o] error 1
  make [3]: * [_module_/tmp/vmware-root/modules/vmblock only] error 2
  make [2]: * [branded] error 2
  make [1]: * [all] error 2
  make [1]: leaving directory '/usr/src/linux-headers-3.0.0-1-amd64 '.
  make: * [vmblock.ko] error 2
  make: leaving directory '/ tmp/vmware-root/modules/vmblock-only.
  Using 2.6.x kernel build system.

  You have a solution?

  Thank you for your help

  Try it - it works for the 3.1.4 VMware Player, so I think it will work the same for 7.1.4 workstation:

  http://communities.VMware.com/thread/324995?TSTART=180

• Cannot change the power state of VM: cannot...   (VMWare Workstation 7 on Debian Lenny)

  Hi all, I am new to this community. I recently installed VMWare Workstation 7 on a Debian Lenny (kernel 2.6.26.2 - amd64). I had no problem with it, but when I tried to start a Virtual Machine Windows Vista, which I created it, does not start. Error says windows "cannot change the power state of VM: could not find a peer valid to connect to". "" Any idea, please?

  Josber.

  It seems that the virtual machine has been suspended when your host is using a different screen resolution

  either change back to the resolution that you used when you suspenmded the machine virtual or delete the VMS.

  This will force the VM to do a cold boot

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• VMware Workstation 10.0.1 and Windows 7 VM crash on CentOS 6.5 host

  Just upgraded to 6.5 CentOS 64-bit (2.6.32 - 431.el6.x86_64). After the updates and reboot I launched VMware Workstation 10.0.1 as I normally and began my OpenVPN (Wheezy Debian) VM with all the problems. I then started my Windows 7 64-bit VM and the entire army what OS hangs and I have to reboot using the reset button.

  I was able to reproduce twice in a row. The Windows 7 VM seems to start fine and then when I type my credentials in and it starts to load the office which is when everything goes south and the host completely freezes.

  The Windows 7 VM has nothing too complicated installed in it. Some Epson software to start uTorrent and printer in network at startup. Steam does as well, but it is not auto-login or do anything really.

  I just did some testing of synthetic load and covered all 8 cores (much more than the usual load) up to 24 GB, 32 GB of RAM and 50% of CPU on the host computer and things remained stable. I thought that a second question could be RAM related because after a soft on boot the Windows 7 VM running I am to about 7 GB of RAM used on the host computer and from the WIndows 7 VM would put me over 8 GB, which resembled a number of nice where things might go wrong If it is RAM related.

  Log files:

  kdump(1): https://Paste.Fizi.ca/?f5c7c3e6945f8ce4#hPoN0VUJbPKA07hbDPWuE1D0e9FC7Ss8RNvF5Qv7yy0=

  vmware - 0.log: https://Paste.Fizi.ca/?05d42cd929bb5237#Zgbtlm7R+bZEHEOs5uSyA6Xin6FOOflWYWvNnHnxksM=

  Any ideas?

  Looks like I need to learn how to use the forum search tool.

  It is a dupe of VMware Workstation - 10.0.1 fails after the software update from RedHat-6.

• initializing iSCSI SAN in VMWare Workstation 9

  Hi all!

  I created an iSCSI Target (Debian Wheezy) and an iSCSI Initiator (CentOS 6). Installation of netinstall (of CentOS) on eth0 to LUN0 on eth1 worked very well. Adjusted BIOS on VMWare to boot from first e1000. At startup, the operating system tries immediately PXE boot, iSCSI not...

  Any big brain here know what I'm doing wrong? I got about 16 hours sunk trying to develop this project, so any help would be appreciated! Thanks in advance for your time!

  Here is the answer to my problem: VMWare Workstation 9 does not support iSCSI boot.  It requires 'PXE chainloading', where a gPXE (or iPXE), PXE loads image gives VMWare PXE allows to start an iSCSI target.  Here are some valuable pages, I found on the subject, even if none show my specific "PXE boot CentOS of Debian iSCSI in VMWare Workstation 9"... guess I am the only one to write this tutorial!

  PXE boot Ubuntu on an iSCSI drive

  http://www.Heath-bar.com/blog/?p=184

  Setting up PXE chainloading

  pxechaining - Etherboot/gPXE Wiki

  Using iSCSI on Debian Squeeze (initiator and target)

  http://www.HowtoForge.com/using-iSCSI-on-Debian-squeeze-initiator-and-target

• 'VMware Workstation does not support the multiple monitors feature in other guests'

  When I click the icon "Cycle multiple monitors", I get the message "VMware Workstation does not support the multiple monitors feature in other guests."  Google found me no hits on it.  Anyone know what that means or how I could get multiple monitors to work?

  The host OS is Windows 7 Professional x 64 with service pack 1 applied.  The guest operating system is Debian Linux, version 8, also 64-bit.

  $ uname - a

  Linux debianvm 3.16.0 - 4-amd64 SMP 3.16.7 - ckt9-3 #1 ~ deb8u1 Debian (2015-04-24) x86_64 GNU/Linux

  The virtual machine was created with VirtualBox, then exported to a .ova file, then imported into VMware Workstation.  VMware Workstation is version 11.1.2 build-2780323.

  -Steve

  Hi Steve and welcome on VMware communities!

  With your virtual machine turned off the power, go into the settings of your virtual machine and on the Options tab, under general, select the client OS type: Linux > Debian 7 64-bit.  Then try to turn your virtual computer and see if it works.  (8 debian is quite close to Debian 7.)

  See you soon,.

  --

  Darius

• Debian Wheezy with GNOME3 in Fusion VMS 6.0.1?

  Hi people,

  everyone runs debian wheezy 7.2 with GNOME3 desktop (mode not help!) in a virtual VMware Fusion 6.0.1 machine?

  If so, how it performs have you? I always get a hint of wheezy pointing me to insufficient material resources even if 3D acceleration is enabled in the settings of the virtual computer.

  Any idea what goes wrong?

  Greetinx

  priesemut

  Hi gnulikeaboss,

  because I don't have an answer to my question here (maybe I'm a bit impatient) I searched the web for hours and followed several links until I found this one:

  Powered by linux

  I completed all the steps, the author suggested and it really works for me now - great!

  I tried with 10 and 8 Virtual material. It works in both cases. I am moving just my new virtual machine on a server ESXi 5.5 and will see if it works there too.

  Good luck!

  greetinx

  Priesemut

• Workstation 8 vmware-workstation-server works not not on Ubuntu 11.10

  Hi people:

  Just, I have upgraded my Ubuntu 10.10 to 11.10 and replaced VMWare Server 2.0 with Workstation 8.02.  It seems that the vmware-workstation-server service is not running.  I'm unable to connect from a web page and the application vmware itself is not able to connect.  When I try to activate the dialog application vmware service I get the following messages in the terminal window where I ran vmware:

  update root@naplesubuntu:~#-rc.d: WARNING: /etc/init.d/vmware-workstation-server LSB missing information
  update - see rc.d: < http://wiki.debian.org/LSBInitScripts >
  Adding system for etc/init.d/vmware-workstation-server start...
  /etc/rc0.d/K01vmware-workstation-server->... /init.d/VMware-Workstation-Server
  /etc/RC6.d/K01vmware-workstation-server->... /init.d/VMware-Workstation-Server
  /etc/RC2.d/S03vmware-workstation-server->... /init.d/VMware-Workstation-Server
  /etc/rc3.d/S03vmware-workstation-server->... /init.d/VMware-Workstation-Server
  /etc/RC4.d/S03vmware-workstation-server->... /init.d/VMware-Workstation-Server
  From Workstation Server: fact

  If I disable the vmware application service, I get the following in the terminal window:

  root@naplesubuntu:~# remove any links of the system for etc/init.d/vmware-workstation-server...
  /etc/rc0.d/K01vmware-workstation-server
  /etc/RC2.d/S03vmware-workstation-server
  /etc/rc3.d/S03vmware-workstation-server
  /etc/RC4.d/S03vmware-workstation-server
  /etc/RC6.d/K01vmware-workstation-server
  Stop server workstation: fact

  If I believe that the service is running, but not doing anything, even though I do not see a specific process for this and there seems to be a vmware-workstation-server executable in/usr/bin.

  Not very well where to go from here.   I tried to uninstall and reinstall the workstation and even using a different port number for the Desktop server, but without any result.

  Suggestions welcome.

  Are you running other services on port 443 on this host?

• Re: Satellite keyboard Funtions vs. VmWare Workstation

  Hello

  I'm new to this forum...
  I recently bought a Toshiba Satellite U500-115.
  After you install all the programs I need, I noticed that the eco and the start/stop button lights buttons didn t work anymore.

  I uninstalled programs Toshiba - nothing works. So I installed win 7 pro x 64 again.
  Buttons worked!!

  I discovered that vmware workstation 6 and 7 are at the origin of this problem.
  As soon as I install the vmworkstation software the keys won´t work.
  Uninstall--> buttons work.
  I don't want to use both: buttons and vmware 6 or 7.
  It seems to work with vmware 5.x, but this version of vmware is officially not recommended to work with win7. It takes about 10 minutes push button vmware initially until the vm ware starts booting.

  Perhaps someone could confirm this problem.
  Hope of a quick solution!
  Concerning
  bachmayeah

  Maybe it sounds pessimistic now, but I don't think you'll have a quick solution to this.
  The feature tools and utilities Toshiba is tested with the own operating system preinstalled and not with some third-party additional party software.
  Can you imagine how these applications you will find there? Who should test the functionality with hundreds of other application? It is certainly not possible.

  I use VmWare, but I imagine that there is a problem where two applications met the other.

  Sorry, but I don't think that there is nothing you can do about it.

• Qosmio F50-111: control buttons stopped working using VMWARE Workstation

  Hello

  Since I've installed VMWARE Workstation v6.0.3, my touch buttons (play, pause, stop, media library, next, previous, updated muted and light webcam and dolby) stopped working.

  So I chose Restore my Vista before installing on my VMWARE of ve. It works again my buttons work...

  BUT I need to install this software (vmware) for my use of employment.

  I've tried remove and install then new value-added Package from Toshiba Web site, but it does not work.

  Please help me

  This means that applications (in TBS folder, such as TDspBtn.exe, TBSbtnSt.exe,...) start running, but stops immediately.

  Thank you for coming to help

  Here the solution:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=181231

  + After the installation of vmware workstation 6.x or 7 - the default setting is "Disable Autorun on the host". (you can find it in: Edit-> preferences-> devices). +
  + Clear hook and restart. After the reboot, the buttons should be working. +