Voicemail will not play through bluetooth car

Similar Questions

• clip + will not play through the car usb connection

  I just bought a clip + to play in a car I just got.  The car has a USB connector that allows radio control to the player.  I loaded songs, all mp.3 off, on the 8 GB drive and tried to play through the car.  He plays for a few seconds then stops and freezes apparently.  The title of the song appears on the radio, but after a few seconds it seems to be stuck and nothing happens and the controls to change the songs don't work, as totally frozen. .  The Player keeps alternatiing between saying 'read' and 'write '.  This is my first mp3 player so I have no idea.  If the 8 GB is too big?  The player is 80% of the full

  What USB mode on the Clip (under settings) is set to?  You can try to change the setting to the other USB mode.

• Speaker blackBerry VM-605 Smartphones will not play through the car radio

  Greetings:

  My new pairs of speakerphone VM-605 fine with my Tour 9630 (Verizon) and works fine for calls via the microphone/speaker.  However, I can not play music files or Slacker Radio by radio of my vehicle.  I followed the instructions and all the right lights are lit on the WM-605.  I have it tune the freq announced by the VM-605 and the station with no signal broadcasting already there, but then nothing happens.  I repeatedly hit the FM button and tried different freqs, but no joy.

  Help!

  I just play a song first, then power up the VM 605 once he turns on and says connected press the FM switch and listen to it on the radio.

• IMAPS will not play through radio

  I have cards will not connect with radio either bluetooth or cable

  Hello paddymac2,

  Thank you for using communities of Apple Support.

  I understand that you do not hear the guests of navigation Maps through your car stereo.  If this is correct, then I suggest you activate the option "Allow HFP Prompts" as shown below.

  Allow guests HFP

  When supported by your car, hands free (HFP) allows navigation invites you to play through your car speakers when the iPhone is not selected as the audio source. With allow HFP lit guest, you can have your car stereo source on a non Bluetooth such as your car radio or satellite entry but still receive turn-by-turn directions on your iPhone or iPad via your car stereo speakers.

  The HFP function depends on your car stereo and your iPhone or iPad must have iOS 7. 1 or a later version. If you don't see the HFP parameter when your iPhone is connected to your Hi-Fi, check with the manufacturer of your stereo.

  Use the cards and Bluetooth on your iPhone or iPad

  On the other hand, if your iPhone is not recognized by your car radio, and then follow the troubleshooting in the link below:

  Help to connect your iPhone, iPad or iPod touch with your car radio

  Take care.

• FUZE 8 GB will not play through a usb cable, passage in charge mode

  Is it possible to plug a USB cable into the ROCKET and make him play through it?  I have an FM transmitter in my car with a remote control, but it works only if connected with a USB cable. I now use it via the headphone jack but want to use the remote control. I just upgraded to firmware hoping it was a bug, but will still support once the USB cable is plugged. Thank you

  I'm not sure what you mean by "Play through the USB Cable"

  Inside that cable companies have four sons:

  Two provide 5 volts, which will load the "rocket" but still allow him to play.

  Two others are the USB data lines, which will allow your PC to read and write data files.

  While these are connected the "rocket" appears as a storage device and play any music.

  There is no audio cable in the USB cable stock.

  When I connect the "rocket" in my car, I have only power connected, it plays music very well and recharges its battery too.

  Even if the "rocket" is connected to anchor the Sansa, you can not play music if the USB cable is connected to

  a computer. There are additional connections in the 30 dock connector line out pins, like headphones

  selector and a few pins communications for the remote, but the stock USB cable does not work

  touch these extra pins. So unless you have a Sansa dock, or maybe one of the Altec-Lansing dock units.

  You probably don't have access to people.

  I hope that helped.

  LyleHaze

• iTunes will not play with Bluetooth speaker

  I use iTunes on a system Windows 10 12.4.3.1. My computer is associated with a high fidelity of iLuv speaker. Audio is not iTunes plays through the speaker very well, but iTunes wants to play through my laptop speakers. I disabled them even, but again, it won't play via Bluetooth speaker. I also changed my reading settings in Live Audio iTunes, which seemed to work for others, but it doesn't change anything for me.

  What bit system you have?

  64, maybe try to download this - iTunes 12.1.3 for Windows (64-bit-for older video cards)

  32, maybe try to download this - Download iTunes 12.1.3 for Windows (32 bit)

• Bluetooth will not play through JBL S200

  MY IPad 9.5.3 running tells me that it is connected to this unit, but there is no sound.  Restore volume on each device control is no different.  I don't have this problem with my Mac or my iPhone.  Someone else?

  You have the sound muted on the iPad?

• Song of synchronization will not play on the car stereo. Help

  I sync music from my windows media on a USB drive. The music on the usb key will play only on computers, but not in my car stereo. What is the problem?

  Hi, Sandra THURMAN,.

  1. What is the format of the music files?

  2. have you checked with different car stereo?

  3. can play you music on your car radio with different USB drives?

  I suggest you to copy the music files directly from the music folder and check how it works.

  Follow the steps mentioned below:

  a. right click on the music files from your computer and select copy.

  b. open the USB drive, then right click on the USB and select Paste.

• Microphone will not play through speakers on my Vista x 64 laptop! + Solved +.

  Hello. I have a problem with my audio controls. I prefer to play my DS and other devices through the speakers of my laptop, but the problem is that my entry is silent and don't try even to tell me to go to the Control Panel, the only setting under 'levels' for my speakers the volume. Is it all fix regedit or driver for it? According to my specs is there anything hardware related, a pilot, or is this something that Toshiba screwed with as they put in place the operating system?

  Thank you.

  My system features:
  Toshiba Satellite M305D-S4831
  Vista Premium x 64
  Processor: AMD Turion Dual-Core RM-70
  Sound card: Conexant HD SmartAudio 221
  Memory: 4 GB of RAM

  I gave up Vista for windows 7 RC1 and it works perfectly now!

  Hi Sniper

  There is not an option at this time in Windows Vista to enable this feature.  It will have to be an option that is enabled through software/driver for your sound card.  You can consult the site Web of Conexant and see if they have an updated driver or a software package that could add the feature you're looking for.  Please let us know if you have any other questions.  Thank you. Shane
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Voicemail will not play

  Voice message received. Also received email notification. Click the voicemail, message would not apply.

  Update Skype to 7.2.59.103.
  Checked the status is online.
  Voice mail activated is correctly set up.
  Signed out and back in.
  Double-checked updates, status and Setup.
  Message would not apply.

  I tried to chat with technical support. Has been through all this without result.

  SOLUTION

  In Win7, click Start > computer
  Under the 'Tools' menu, click 'options of folders... ". »
  On the "Général" tab, check the option 'show all files '.
  Under the "View" tab, select "Show hidden files, folders and drives.
  Close dialog box.
  Navigate to the computer > Local drive (C > users > username > AppData > Roaming > Skype > username > voicemail)
  Press Ctrl + A.
  Press DELETE, and then click to confirm.
  Now listen to your voicemail.

• AfterEffects cc 2015 will not play through soundsticks

  Just upgraded to AfterEffects cc 2015 and cannot get the audio playback and preview to come through my Harmon Kardon soundsticks.

  AfterEffects CC 2015

  iMac Intel Core 3.5 GHz 17, 32 GB of ram

  10.9.5 OSX

  I can get audio through built-in speakers, but it's not the quality I expect - all other audio comes through the soundsticks.

  I work on an animation project, have come to rely on the soundsticks working with AfterEffects during preview and cleaning.

  Worked fine before the update.

  SoundSticks do not appear in the preferences: Hardware Audio/preferences/AfterEffects

  If I set preferences default input/output of the system, I get no sound at all, if levels and waveforms to register.

  If the value built in output I get only the built-in speakers.

  Any ideas? Is there something that I am missing?

  Thank you!

  I had the same problem.  What you need to do is to go into Setup Audio MIDI on your OS X and in audio devices change the .hz to a lower setting soundsticks - 48000 or 42000.Hz.  Now, they work fine on my machine.  I hope this helps, it's really frustrating when an update of something effects greater than audio playback with a warning message and I feel your pain!

  M

• background sound will not play through...

  Forgive me if this has been asked before... I typed in "background" on research for reminder only, and he gave me 0 results.

  in fact, I get a kick out of this...

  but, I have together audio as 20 second clip, continuously in a loop until a selecttion is made and it starts up fine, and it thus loop. However, when I select any selection on my menu, the clip starts at 0:00 new is there anyway to scroll all the menu choices on the screen given without it restarts?

  I chose different settings in the properties of the menu and still nothing.

  -This is just an excerpt from yet, or do you have built the project on disk or .iso and tested in software or hardware players (or both)?  If you have not tested with a mounted .iso image or a RW, please try to see if all goes well.

  -Jeff

• serious discs will not play on the cd player or car drive?

  When I burned a cd of music with windows media player, the disc will not play on my cd player or car player! Help!

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-sound/burned-CDs-will-not-play-in-CD-player/48cecc76-0A15-4c16-952d-f388244387f9

  See the response by Diana d.

  Tom Ferguson

• USB sync will not play on the sync in car package

  I have CDs that I ripped to my playlists and then synchronized on a usb key.  Will play on the computer, but not in the vehicle.  What I am doing wrong that the USB sync will not play in the vehicle?

  CIA

  Hello

  1. have you ripped music files and synchronize directly on USB?

  2. What is the file format of the files that you ripped?

  3. are you able to play the songs in a different computer?

  This problem normally occurs when the radio does not support a specific file format. If you are able to play the songs to another computer, I you suggest to use third party software to convert .mp3 files and then check with the question.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information helps. Response with status so that we can help you.

• Why audio will not play when to jog through the window of sequence?

  I only noticed this recently, but for some reason, jogging frame-by-frame in the sequence window will not play the audio portions of the project. Is there a way to fix this in Adobe first Pro CC 2015?

  Audio is playing while Scrubbing verified?

  

  MtD