Volume balance

Similar Questions

• echo of power through my speakers to the audio system

  On June 17, 2012 I started having headaches back echo feed through my laptop (Latitude D600) speaker system, it was the first time I've ever had this problem. The first thing I did was run the Microsoft Fixit Audio Play Back. The results were no problems found. Then I ran IOBit Advanced System Care. No problem found the results. Then I opened a system audio through Control Panel, clicked on a video and worked the tools of control volume & balance read audio voice while listening to the video. Cause no effect on the problem. Then, I uninstalled and reinstalled Adobe Flash Player & Java. Results still have the problem. Extensions in Firefox extension Adblock Plus, Ghostery & WOT. Disabled Extensions Microsoft Net Framework Assistant & Zone Alarm engine research. Permit Plugins, Java Deployment Toolkit, Java platform. Disabled Plugins, Microsoft DRM, VLC Web plugin, Windows Media Player in Dynamic Link Library, & Windows Presentation Foundation. Need help on what to do next.

  Thank you Eagle Fulton

  You probably have the "listen" checked.  Listen to is like a mixer that mixes the microphone and speakers.  Set too hard, that he's giving your comments

  Course, if I knew what OS you have, I could tell you wjere is but I don't

  We are not in a position to help unless you help by providing us with as much information as possible.

  Suggestions for asking for help on a site.

  http://support.Microsoft.com/kb/555375

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/what-information-to-post-in-the-Windows-Update/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

• New engine audio speakers are volume levels asymmetrical, even if I double checked all the connections and checked through balances of speaker system preferences. Help, please?

  I have an old desktop iMac to less than 1 year, I've upgraded to El captain of Yosemite.  Just fine, except the quality of the internal speakers.  Yesterday, I received speakers brand new engine audio 5 +.  Hooked by instructions.  Between the speakers volume levels are completely unbalanced. His active in Preferences system - balanced in the Middle, 50-50.  Verified in applications/utilities-audio MIDI output, everything is correctly set.  I can get pay only by the reduction in volume of the speaker on the right to almost nothing, but then I have no more volume than offer the internal speakers.  Any solution would be greatly appreciated.

  You use the audio output from your Mac an entry in your speakers or you cross an external DAC first?

  I also have the A5 speakers +, and I also use their USB D1 DAC which then audio output runs to the speakers.  Yosemite was a constant headache with my setup, but appears to have been eliminated with El Capitan.  I installed OSX to El Capitan, as well as later make a clean-install of El Capitan purely for my wanting a clean and in both cases, the sound system was very good.  Those who speak of fantastic, better that I have owned yet.

  Can you be more specific with how your output of iMac is done?  As usually, always check, then check your connections in your speakers and make sure that the audio cables are intact and not frayed.  If you use the headset, ensure that the headphone cable is robust and doesn't look like not to is damaged/twisted.

  You can consider getting the audio DAC AudioEngine to manage your Mac, as it is much better than one built-in that comes in your iMac.  I use it on my new iMac 5K that I received a few weeks ago.

  http://audioengineusa.com/store/digital-audio-converters/D1-24-bit-DAC

• Lack of access to the balance of audio volume control

  The balance function is 'available', but now hidden in Windows 7. Is it possible to use a script or macro to quickly access the balance control? W7 the access sequence for me is 1) Windows task bar (click to view)--> Start (button)--> Control Panel (list)--> material & audio (hyperlink)--> system (hyperlink) change sounds--> reading (tab)--> helmet (icon)--> properties (button)--> levels (tab)--> Balance (button)--> press '1' (scroll bar) and the key '2' (scroll bar)!

  A previous post, "can not balance sound in Windows 7", addressed to this situation with a label that showed more frustration a question. The response was useless for recommended action reduces the string above: click right volume (icon)--> (list) of sounds--> reading (tab)--> helmet (icon)--> properties (button)--> levels (tab)--> Balance (button)--> press '1' (scroll bar) and the key '2' (scroll bar)!

  My comments are: 1) I could not designed access more complicated if I had a degree in software development. 2) what's up with "Key 1" and "key 2"? People have a left ear and right ear. (3) I read that more than 10% of the American population live with hearing loss. The loss is not symmetrical. A balance of ready-access control is an important element.

  Please consider to improve this feature.

  Hello
   
  Can you tell us if there is a volume icon in the system tray, if not then please follow these steps below to activate the volume icon in the system tray.
   
  1 right click in the taskbar near the time display and you'll get a context menu.
  2. click on properties.
  3. under the system always icons display, check the volume.
  4. click on apply.
   
  Also note the way the quickest way to change the volume of your computer speakers is to click the speakers button in the notification area of the taskbar
  Right-click on the "speaker" icon and select the open volume mixer.

  1. on the speaker, once you get the properties of speaker.
  2. Select the levels tab.
  3. here, depending on the output device, you can goahead and balance the left and right output device.
  4. it's only the easiest to access the balance of volume.
   
  If you want to suggest changes in the design here is the link you can make reference to: Microsoft Connect - back products and bug reports. Microsoft...
  https://connect.Microsoft.com/dashboard/Info/

  Thank you, and in what concerns:

  I. Suuresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forumand let us know what you think.

• Volume mixer is not a balance slider

  order balance of speakerphone (vista/windows7)?

  Control of game XP window had a slider for adjusting the balance for wave and "play control".  Also known as the sndvol32.exe I'm under the rc of windows 7 and the volume mixer (sndvol.exe) isn't a balance slider more.  I realize I can go manually in the adjustment of the balance, but it's a pain since I seem to have to do it so often. Y does it have a shortcut to the file .exe for this window "balance"?  Or is there a way I can back my window "control playback?

  I really want to have to pay $18 (US) for the third-party mixer program. I downloaded a free freeware program, but most are really hideous (ruins of the flow of windows 7), inflated with icons, or does not work for what I need to.

  Go to control panel of-> sound-> sub tab 'Read' select 'Properties' of your device. (Speakers, headphones)
  Then, you will be on a tab "properties of speaker.  Select 'levels this option will allow you to change the balance.

  Hello jacks33177,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is a problem installing Windows 7 positions and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro?ITPID=sprblog

  Thank you

  Jack

  Jack
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to download volumes of GL budget balance in OBIEE

  Hello

  When I run the GL dashboard

  and click on the actual vs. budget, I'm unable to see all the data.

  Please can someone advise me how to do to download data GL Balance Budget OBIEE.

  Concerning

  REDA

  We use OLIVIER 7.9.6.3 and OBIEE 11.1.1.5

• Equalization of the volume and Itunes game issues

  All my songs are upgraded using mp3gain and play at the same level on my computer.  But when streaming, the volume is in every sense.  Push me bananas!

  Tried the Sound Check and while I note that all the songs now sound more calm, the volume between tracks still differ as before.  I have not yet found a rhyme or reason to which his songs more or less than.  Does not appear to be linked to the question of whether a song has been balanced or not.  I also tried each song tags mp3gain stripping and stripping all BUT tags mp3gain and doesn't seem to work.

  So, is there a solution?  Someone at - he found a motive or reason for the difference?  I love everything which relates to the product but this.

  Thank you.

  He is not an Apple product. You should talk with the developer.

  http://projects.sappharad.com/MP3Gain/

• Camileo H10 - White Balancing does not work

  I bought this recorder in December 2008. I tested some records inside, outside and I found, that White Balancing does not work.
  I can put it in automatic or manual, but all videos are little pink. Is this a firmware problem or is it a bad piece? Where can I get the new firmware?

  Thanks for the reply

  Hello Bunak

  Toshiba has released the new update and you can find it on Toshiba support and download page under http://eu.computers.toshiba-europe.com > support & downloads
  On the drivers download page please choose the criteria for follow-up:

  Product type options
  Family digital Imagin
  Range of digital video cameras
  Camileo H10 model
  OS operating system practice
  Type of driver Firmware update

  So here you can find the update to Firmware version 1.1. Last modification date is 12/02/08.

  In order to provide the best quality, update Firmware for Camileo H10 results with feature upgrade as follows him.

  1 give input MIC (improve the volume of MIC)
  2. set the focus window (improve the AF)
  3 tune AE to avoid exposure
  4 tune matrix color and saturation (performance of color)
  5. set the noise filter (improve the noise level)
  6. grant WB (improve the AWB)
  7 change the string from the user interface in CZ

  Here the steps how to upgrade the F/W (Firmware):

  First of all, there are two different language version of the UI (User Interface) of the EU & UK and EEMEA version. Please select the appropriate according to your language file instead.

  -EU & UK F/W version 1.1 include: English, Deutsch, Español, Português, Italiano and French, Dutch
  -EAST F/W version 1.1 include: English, Czech, Greek, Hungarian, Polish, Russian, Turkish, Slovak

  * Files of F/W 1.Copy to an SD card *.
  -Format SD card. Make sure that the FAT file system is selected before formatting.
  -Copy the F/W (zburnT_C10.run.elf and DCIM folder) files in the root directory of the SD card
  (PS: there is another folder and file in the DCIM folder, please, do not change the content of this)
  DCIM folder)

  * 2. Firmware Update (Please make sure of course he didn't is no battery inside the unit and the power adapter is not connected to the camera) *.
  -Open the Panel first
  -Insert the SD card which has the F/W files
  -Insert the battery (make sure that the battery is full), then plug the power adapter to the camera.
  -Press the shutter button when the message press shutter to update to start the update process. During the F/W update of the LED will keep flashing. Do not remove the battery or disconnect the AC adapter during this operation, otherwise the camera will be damaged.

  * 3. Update has been completed *.
  -The LED will stop flashing once the firmware update completed (Please make sure that the flashing stop light)
  -Restart the unit remove before adapter, the battery and the SD card in camera in order to avoid the firmware update again.
  -Upgrade of the F/W was over.

  Please follow these steps and let me know if everything is Ok now.

  Good luck!

• Satellite Pro A10 - no sound and the volume is enough

  Hello

  Recently, the sound quality of my satellite Pro A10 began to get grainy and this which resembled your comments, but the volume was not high and not so long ago
  order completaly.

  Ive reinstalled the sound drivers and it worked
  perfect for about half a day and was silent again.
  I tried to use headphones and still no sound.

  help would be very nice.

  PS. Please excuse the wrong spelling: P

  Hey Buddy,

  Following suggestions:

  1. recovery of your machine COMPLETELY and check if it work s
  2. in the case of no success, try a BIOS update and check again
  3. If the previous steps didn t have worked, visit the following site and contact a service partner authorized in your country for material balance / repair:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Welcome them

• I have no./very low volume on windows media player

  I also no./down volume on hotmail, when I try to view parts enclosed/video downloads

  Hi AnthonyRicci,
   
  -Were you able to hear the audio without any problems in Media Player?
  -What version of Media Player do you use?
   
  Try these methods and see which one of them helps to fix the problem.
   
  Method 1: Make sure that the equalizer is balanced
   
  If the equalizer is rejected, you may experience sound related problems.
   
  To check this setting:
   
  a. click view, improvements, graphic equalizer. Once the graphic equalizer is displayed, make sure that all settings are at least halfway.
   
  Method 2: Check the settings of the sound
   
  Verify that your settings are correct. When other software programs, it is possible for bad programs adjust settings audio, causing problems with your sound.
   
  Method 3: Update Windows Media Player
   
  Try to update the media player to another version and check if it helps.
   
  For problems with Hotmail, post your request in the Forums of Hotmail.

• Low volume compared to my original Video Clip

  I just got my new 8 GB Clip more this week after using my original 2 GB Clip for 2 years and love it. Unfortunately, I noticed that the volume of the Clip Plus is a little lower than my video. I have done all the stuff with the control panel and the region (tried in North America and rest of the world, put the volume on 'High' setting) but is still not as strong as my old Clip. And forget the 'Normal' setting, it's just laughable how low that is. But if anyone has noticed this difference in volume between the old Clip and the Clip Plus? Is there a way to make it as strong as the old Clip most Clip? Thank you.

  IIRC the volume reduction was changed in an update firmware for the Clip V1. If I play my V1 Clip with firmware.18 50% in volume, it is about equal to my V1 Clip with firmware.35 to 75% of the volume. The volume of 100% full power even sounds good. I think that the scale has been changed for lower volume at least for sensitive IEMs who played too strong with smaller settings. I also believe that the balance of volume Clip + is equal or very close to the version of the software to scale in the Clip V1 and V2.

• Volume equalizer?

  Volume is uneven, some tracks are noisy (current dance floors, contemporary rock, etc.) while others are lower (more old analogue recordings ala pre-1990.) Oldies, etc...)

  Is there a function Compressor/Limiter that will increase the volume of securities less and turn down the hottest volume of titles, so there's a balance of consistency?

  I noticed that there were several messages about SanDisk low volume in general. They have dealt with the issue?

  To be honest, the volume at its peak level is more than enough when we are talking about headphones. It's when you plug the drive on your Hi-Fi, that volume is more insufficient.

  Any help is appreciated.

  If they are .mp3 files MP3Gain allows you to normalize the volume, but it does not work on .wma, .flac, ogg or .wav.

  SanDisk music players do not have a low volume; although on the contrary actually... unless you live in Europe or otherwise to give Europe in your region on the player. The EU has a ceiling of the defined benefits that all manufacturers of audio devices must meet in order to be able to sell their products in these countries.

  That being said, if you live in Europe there is a way around this limitation of volume.

  Eager to use this drive with a stereo system or large speakers, however, you must understand that this puts milli-watts of power. Enough for headsets or some phones, but it has not designed or equipped to do much else. It may need assistance in the form of speakers, a socket AUX in on your Hi-Fi (in order to tap into the amplifier it), or a headphone amp.

• Xperia Z5 too low ring volume

  Hi all

  I used Xperia Z5 almost 3 months and was very happy with my phone until I get 6.0.1. Now I have a very big problem with my phone, it's no longer stereo speakers.

  When I listen to music or watch the volume video game or the game is normal but it not balanced lounder very pregnant top speakers low and worse, is that when someone calls me my ringtone is really really too low it is not possible to hear it.

  I try to repair my phone with Sony comp. it did not work.

  Most likely, if I can't find a solution for this, I'm going to buy another phone and I buy never any phone Sony because I have exactly the same problem of my Xperia Z3 extracts + that is why I bought Z5, but I still have the same problem.

  Thank you

  BR

  I've tried change the ringer volume

• Dual bay JBOD integration: Volumes - Simple striped split vs vs

  The first option that I need to decide now is not put in shape, but rather if I want to set up as a Simple Volume, extending on Volume or Volume aggregated by bands. I demand to know: at what is Spanning and what is scratched? And besides, what is used for Simple? I know that I can get this information, but if you can relieve me of plowing through the mountains of unintelligible English composition work, so, I would be grateful: namely, what is the difference between a VOLUME and a PARTITION? and what it means to "mount" a volume?

  I have decidted to try an answer to these questions you asked, although I considered a risky business. Use of the Word may differ widely and wildly. I decided this because I was surprised to see a paragraph that uses the colon properly and correctly punctuated ' to know '.

  I start at the end: VOLUME and PARTITION. If the technical use of the terms in the jargon of computer geeks was the English standard, the PARTITION would be the place or address on the media which marked the end of a data structure. Similarly, the VOLUME would be data locations or addresses to which the data have been recorded. It is similar to the WALL and the ROOM. Use of the techniques of the terms did not differ much. When we talk of a PARTITION, we refer to a data structure that resolves the type, position and scope of a storage container. When we talk about a volume, an end to the storage location that have been defined for the storage of the data. Often, a drive letter is assigned to the volume. It is then a LOGICAL DRIVE.

  Note that many people uses the term PARTITION when they do in fact refers to the space between the partitions, actually a volume.

  It starts to get confused when you start under division in the PRIMARY and EXTENDED PARTITIONS. Suffice it to say that a primary partition refers to one set for its possible to maintain an operating system. He was confined to a volume that has been assigned a drive letter. The score of exrtended was intended for the non-executibles, i.e. data. Several volumes could be created within the partition, and more than one drive letter is assigned, one for each volume that is created. Each volume is a logical drive. Now-a-days, the distinction between primary and extended is blurry in use and (worse [?]), some operating system installers will allow you to install the operating system on an extended partition.

  Now, back to Simple, Spanning and striped.

  Simply referring to the fact that the entire volume is on a physical drive in either a primary partition or scope and size is fixed.

  Extending on refers to the fact that the fact that the partition is set to start on a physical disk and continue on one or several others.

  Striped refers to the fact that the contoller will deliberately write parts of the stream in defined segments, fixed size for each of the drives that are used for the volume.

  Now, to the subject of which simple, spanned, striped for use.

  Extending on is used especially when you have to have a very large space to store large files. On some systems, it is used as a convenient way to increase the size of a volume without requiring large data movement. Avoiding the passage of data avoids the time delay in particular with large files and the problem of data integrity of submitting the file for read/write operations.

  Interlacing is a form of Spanning. Covering appearance adds the notion of dealing with predefined segment length and balance the data across the physical disks. (I think here only to configurations using the entire disk for the game.) It is preferable to the covering simple (JBOD, for example) where data integrity is paramount. As implemented, it provides various means of correction and error detrection.

  Editing refers to the process of the operating system identify the drive and placing the instructions and data structures in place to enable disk reads and writes.

  My suggestions:

  If you need large and contiguous storage space, use a simple volume on a large drive. If you need speed, use the RAID 0 functions and make sure that you back up critical data frequenthy. For Windows, it is probably not a good idea for most users to use the readers more of 500 GB or 1 TB per RAID 0 set. Use the 'Quality of the company' readers, drives designed to operate continuously for long periods of time.

  I hope that gives you a starting point. Pease do not let it be the only place. You would be well served by reading and extensive consultations.

  Now, whether or not the discussion begins.... ;-))

  Tom

• Follow-up controls drive & optimizations of volume after FW upgrade to 6.0.6. ?

  This weekend I upgraded our 5.2.4H1 to 6.0.6 units. I can't find the exact wording right now, but I read somewhere that after the upgrade of the line to 6.x, disks are checked/cleaned rigorously with some new advanced algorithm to eliminate potential errors.

  Also, there should be some new algorithms to rearrange the volumes of the optimized volume load balancing.

  Can I follow this where newspapers?

  Car tracking events are not visible in the GUI or CLI events lists, until something happens.  Since this is a background process, and / if when a problem is encountered, the table will be the image of the player to one of the spare parts (13.2.3: commissioning of copy-for-parts of car-number of the disk to drive in car-number).  Mirroring is done to improve the performance of a reconstruction process.

  Regarding the volume of load balancers, this is discussed here: www.dellstorage.com/.../DownloadAsset.aspx

  -joe