Volume display shows options for the speakers and headphones

Similar Questions

• Audio comes through the speakers and headphones plugged headphones

  Audio sound plays through the headphons and speakers when headphones are connected.

  Any advice appreciated

  Hello again Nervuz,

  Thanks for the quick response!

  Based on the information you have provided, I recommend to uninstall and reinstall the audio driver for your desktop. To do this, please follow this document on follow-up with the IDT High Definition Audio Driverdownload and software uninstaller (Windows 8). If this does not work and you hear again audio to both the speakers and earphones, please follow the next step.

  The next step is to run a diagnostics using Automated Troubleshooting (Windows 8)program. This should help with the audio in question.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• The speakers and headphone devices are passed around. (speakers are now set as headphones)

  I was going through my sound settings and then all of a sudden the headphones and speakers device device swap and my sound sticks to the top and sometimes works and sometimes doesn't. Especially when im on the internet the sound does not work.

  Help, please!

  Its working properly now with the names wrong so I changed the name back to the speakers and now I hope that it stays that way

• Try to use the speakers and headphones

  • I have a Durabrand 5.1 speaker system and normal headphones with microphone included. The speakers plug in a headphone and headset (of course). I'm trying to figure out how make my computer recognize them both at the same time. Until my recent updates I could disable my speaker and sound was still coming through the headset but either headphones now have no audio or the speakers do not have. Realtek Hd Manager doesn't seem to like them both at the same time. At the same time I didn't need the microphone turned on the headset due to having a Logitech cam with a. Any help would be appreciated.

  Hi Xerosk,

  First try to run the Audio troubleshooter built into Windows 7 and check if it can find any question and fix. Access the link below and follow the steps to run the Audio troubleshooter in Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Also, make sure that the default sound device is set correctly for the audio device you are using. To set the default device, follow these steps:

  a. click on, and then type Sound in the box to start the search.

  b. click sound in the search at the top of the beginning menu.c results. Click the reading notice the check mark next to the default device. For most users, the default device is speakers. Make sure that the audio settings are configured as expected.

  Follow these steps:

  d. on the Read tab, select the playback device, click Properties, click the Advanced tab and make sure that the default Format is set to the value you expect. When you are finished, close this window to return to the previous window.

  e. on the Read tab, select the playback device, click on configure and make sure that the configurations are set correctly.

  f.Select the audio device you want as the default audio device and then click on set as default.

  g. click OK to save your settings and close the sound dialog box.

  Determine if you can now hear. If you can hear the noise, the problem is resolved.

  Also try to update the audio drivers supplied by Device Manager and check if it helps. You can access the link below and follow the steps to update the drivers on your computer.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  You can also contact relatek and check if you need to make changes in the settings in Realtek HD manager for the device to work.

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• my flash builder shows no option for the ios and blackberry application

  

  I can't read this info on my installation of FB, although installation details gives the version numbers for various components (on Flash Builder - press installation details), but if you go here: http://www.adobe.com/support/flex/downloads_updaters.html#flex4_5 you can find the 4.5.1 update that you have installed.

• Sound is comin from the speaker and headphones at the same time. How to solve this problem?

  Hello! I installed win7 professional and upgrade to ultimate and when I play a music or vdo sound is coming from the speaker and the headphones. I have a 3ghertz Pentium 4 with 1 GB of ram, and it runs the 32-bit version. And also the headphone option is not present in the peripheral reading option.
  Can any1 please please help me?

  We consider that your machine uses Realtek HD audio-
  (Older versions of Realtek HD audio drivers may have a slightly different form, but the)
  basics should be the same).

  There are two ways to set up the helmet when it is plugged into the façade decision-making;
  (1) in Realtek Manager of her go to Advanced Settings feature in the upper right of the window.
  Check the circle next to cut... plugged back.
  When this fact was you must also click on the yellow folder icon below the
  Device settings advanced and check 'Disable protection of jack façade' is clear.
  -Of the drawbacks of this method are that you do not get an option of separate settings for headphones.
  then they use the same environment as your speakers and EQUALIZER settings, but you can use both the
  speakers and the headphones if you wish.
  -Note that with this option, the helmet does not show in Sound Manager window.

  (2) advanced settings in the sound Manager go to Realtek device.
  The check box next to do advance... at the same time.
  This will disable the speakers when headphone is plugged in the socket of the façade,
  and return to the speakers when headphones are disconnected.
  Also check one or more of the boxes below, according to your need.

  -With this setting, there is an option for headphones in the two Windows Sound manager
  and Realtek HD Audio Manager.
  -With this setting, it does not matter which option to use in yellow folder as the setting icon
  is ' either / or '. You cannot run at the same time the speakers and headphones.

  -Note that with games the headset must be connected prior to spear the game, or
  the default set to the speakers.

• Speakers and headphones

  Hello

  I have a HP Pavilion 20 all in one computer. I need to know how to configure the system so that the speakers and headphones at the same time, to play the music. can some help me?

  Thank you

  Terry

  Hello Terry
  
  After looking into this for you, the most common way to have audio play among two different devices is to use a virtual audio device called Mix stereo. I found a YouTube video where someone shows how he installed the stereo mix on Windows 8 Preview of consumer. Unfortunately, read the comments below several users report that the referenced driver does not work for the operating system Windows 8 to address fully released.
  
  I'm not sure another way to have an audio reading of the two different devices on Windows 8.
  
  Some of my sources:
  How to turn on the stereo mix on windows vista/7/8
  Realtek audio speakers/HDMI switching

• Connection of the loudspeakers and headphones together on Qosmio G30

  My question is, if it is possible to use two different audio out on Qosmio G30. It has two connectors, but seems to be linked together. I want to use my Qosmio with virtual DJ, one audio channel speakers and one for the preparation of music (for headphones). I want to have music on the speakers and headphones to better mix.

  Is this possible, or should I buy an external sound card? Is it inside the map two-channel audio or not?
  Thank you

  Hello

  I'm sure that something like this is not possible. On two ports, you will have the sound of some. Music production you can not choose which port should be used for his outgoing.

• Given that I have install iOS 9.3.1 my iPhone 6 Plus is very slow, in the speakers and keyboard, I can't watch videos in YouTube or Facebook and sometimes do not work the volume buttons and lock

  Given that I have install iOS 9.3.1 my iPhone 6 Plus is very slow, in the speakers and keyboard, I can't watch videos in YouTube or Facebook and sometimes do not work the volume buttons and the lock. I rebooted my phone like 10 times and it does not work, I need help,

  Have you tried a forced reboot? Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. You won't lose anything.

  If this does not help, I would like to try a restore:

  https://support.Apple.com/en-us/HT201252

• How can I get the COMPLETE serial number to display? This number shows except for the 4 last digits.

  How can I get the COMPLETE serial number to display? This number shows except for the 4 last digits.

  Hi Infogoddess,

  Thank you for using communities Support from Apple! If you try to find the serial number of your iPod touch or another Apple product, you can find information and the steps in the following articles useful:

  iPod: how to find the serial number - Apple Support

  Find the serial number of your Apple - Apple Support product

  See you soon

• My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  Assuming that you have a valid SIM card in the phone, it is more often symptomatic of a phone that has been hacked or jailbroken to unlock.

  Where do you have the phone first?

• my external cd will not appear in the finder or on the desktop.  I went into preferences for the finder and intended to show the CD, I can load a blank cd and iTunes says and I burn on it then the cd will appear on the desktop.

  I don't see my external cd in the finder under devices, I can load a blank cd and iTunes says it's white and I can burn songs, then the cd icon appears on the desktop, went into preferences for the finder and ticked the box show the cd.  Help please?  CD has been disconnected and placed back started loading but no show, iMac says he had an attached cd when I search.

  CD/DVD players don't appear that a disk is inserted. It's normal.

• my sound works fine except when I play a video. When I click on the volume, then mix it bumps on speakers and system sounds, but not when you set windows media player

  When I imported my videos from my phone and then began to look at there was no noise. I clicked on the volume, and mix. adjusting the volume on the speakers and his system, it's a ding, but when I have not adjusted the volume on windows support no ding. It is not cut.

  Hello

  What version of Windows are you using?

  This is by design, when you try to adjust the bar its windows media player or WMP or the volume mixer you will not hear the sound of ding.

• I'm trying to set up an Ad Hoc network, but there is no option for the Ad Hoc network configuration when I go into the network and sharing Center.

  I looked at how to make a point of my computer because I have a usb wireless internet device for my laptop and I tried to get an ad hoc network setup but there is NO option for the CONFIGURATION of the NETWORK AD HOC when I go to network and sharing Center... what should I do?

  original title: ad hoc isn't here...

  Hi NickBean2,

  You can refer to the following articles and see if it helps.

  Set up a computer-to-computer (ad hoc) network
  Solve problems, find wireless networks

  Hope this information is useful.

• Dear all, in the follow-up to Massage exhange 2010 there is no option for selective date and time if we want to follow and check the delivery for 2 months mail report, then how, please guide

  Dear all, in the follow-up to Massage exhange 2010 there is no option for selective date and time if we want to follow and check the delivery for 2 months mail report, then how, please guide

  Hi Anandsable,

  The question you have posted is based on Exchange 2010, it is better suited in the Exchange Server forum. Please post your question in the following forum:

  http://social.technet.Microsoft.com/forums/en-us/category/ExchangeServer, exchangeserverlegacy.

  Hope the helps of information.