volume does not contain a recognized file system

Similar Questions

• USB flash drive receives an error "volume does not contain a recognized file system" in Windows 7

  I plugged my USB on a windows 7. He always invites me to analyze and correct or cancel. I cancelled each time, but I got bored with it popping up each time, so I said to investigate and fix.  A loading screen came so I waited patiently. After that it asks me to format my USB flash drive. I can't format it but because I have files from work to home and all my other personal files out there. So I cancelled the format, but every time that I plug it into my computer it asks t format. I even plugged in on a computer running windows XP and wanted to get in shape. When I try to run it without formatting as it is said, "E:\ is not accessible. The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupted. "My question is... what we Windows 7 to my USB and how can I recover my data?

  This is common with USB drives used on different operating systems. It happens alwaysto me when I use my drive to work (which is managed since my MacBook Pro) on Vista and Windows 7 client computers. Like you, I learned the hard way you must cancel the digitization of Vista/Win7. The only thing to do at this stage is to connect the player to a computer that can read the files OR use the software of data recovery on it to get the files. I believe that Recuva can do it for free. Format the Flash DRIVE, then start again. Either way, you don't want to use a USB key as a single backup of important files because - as you have unfortunately discovered - stuff happens.

  http://www.Piriform.com/Recuva

  http://www.elephantboycomputers.com/page2.html#Backing_Up

  MS - MVP - Elephant Boy computers - don't panic!

• The Volume does not contain a recognized file system

  On my USB connection, windows asks to format. When I try to format... .Windows shoes "Windows is unable to complete the format."

  I don't have all the data in the USB... I want to just format... Please guide me the steps of formatting.

  (PS - 1) I tried to format through disk management, but it does not work.

  (2) I tried various applications... .but they often want activation for formatting.

  Hello

  Thanks for posting on Microsoft Community. You can try to format the flash drive by following the listed below as follows:

  1. Connect your USB to the computer and open Windows Explorer to check the drive letter of the flash player.
  2. Press the Windows key + X on the keyboard, and then select command (Admin) prompt. To open the command prompt in Administrator Mode.
  3. In the command prompt type Format and respective of drive letter and : , then press enter. Example: Format D: (if the letter assigned to your flash drive is D.)
  4. You may be prompted to type the name of the volume. Type the name of the flash player.
  5. You will be asked permission to start the formatting. Type y and press ENTER.
  6. The flash drive will be formatted.

  If the problem persists please perform the same steps on another computer.

  Hope the helps of information. Let us know if you need help with Windows problems. We will be happy to help you.

• MBR - Volume does not contain a file system recognized - after bootrec options

  I was unable to install the Vista SP2 (as it appeared later, because of a Grub boot loader installed by Linux). I tried to reconfigure the bootloader and the partitions (which allows to boot directly into Windows), but after several bootloader configurations (load different partitions as well as MBR) and some partition resizing (resize incl. NTFS partition). Windows unbootable.

  I tried Windows Rescue Disk:

  Bootrec /fixmbr succeeded

  Bootrec /fixboot did not work until I made the /scanos (including iedentified, after having disassembled the NTFS Linux partition and putting the flag of boot loader in the MBR and the default option of grub in Windows, there are 1 installation of Windows in C:\windows).

  If I then repeated bootrec /fixboot he gave the message that the volume does not contain a recognized file system.

  I also did bootrec /rebuildBCD (after renamed it bcd), ultimately without success.

  In total, the situation of 'better' I reached was either a Windows startup with a cursor flashing something happens (apparently find the partition but not any which boot file or OS); or the spare arriving to determine that there is a partition of Windows Vista, but (following the first option to simply repair the system) 'no errors detected. " The second option here, "Restore to a previous point" refers to that there is no previous such restore point.

  It took me about 24 hours now to finally get SP2 installed, but obviously with only murkier.

  Hi Willem W,.

  I suggest trying the (step 1 in the link) Startup Repair and then manually rebuild the BCD (Boot Configuration data) using Bcdedit.exe (step 3) in the article below and check if this solves the problem

  Error message when you start Windows Vista: "the Windows Boot Configuration data file is missing required information".

  http://support.Microsoft.com/kb/927391

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows does not load because registry files system is missing or damaged. error code: 0-xC0000001

  My computer laptop lenovo has a problem. I am not able to start windows. So, I asked for Lenovo recovery DVDs. Now, when I tried to boot from this system recovery DVD, I get the following error after loading the file screen. Please help ASAP!

  Window Boot Manager
  =====================
  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windows installation disc anf resart your computer.
  2. choose your language settings, and click Next
  3. click on the your computer Lair

  If you have not this contact your system administrator or computer manufacturer

  File: \windows\system32\config\system

  Status: 0 xC0000001

  Info: Windows failed to load because the registry files system is missing or damaged.

  Hi Walter, thanks for the quick response.

  Message system ther said however to fix it with the windows installation disc.

  So I'll be able to get a copy of the cd to the Microsoft Vista operating system? I can try with that and I hope that he can solve the problem.

  Hey Santosh Panda

  I'm sorry, but microsoft does not include disks of vista for the oem brand computers

  your manufacturer already provided you the means to reinstall vista

  There must be a reason why your "Reinstall vista" drive recovery lenove does not work

  and we cannot help you with that

  Lenovo can

  Walter, the time zone traveller

• the windows boot configuration data file does not contain a valid entry os

  Hello

  I got this message when recovery... I can't get the windows... I have the CD recovery, but when I boot it... It gives me this message

  the windows boot configuration data file does not contain a valid entry os

   

  
  How do I solve this problem

  Hello

  Assuming that it's just a problem with the recovery media, here's another solution, you can try.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( it must be the same version that originally shipped with your laptop - IE if your laptop comes with Windows 7 Home Premium, that is the file you need to download ) from the link below and use an app like ImgBurn to burn the ISO correctly file on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  The source of the Image is - Digital River.

  Images of Windows 7.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software you may need are located by entering your full model number or Nr here.

  Kind regards

  DP - K

• 'System.DateTime' does not contain a definition for 'HasValue '.

  I develop a lightswitch application. But me make mistakes trying to build the application:
  using System;
  using System.Collections.Generic;
  using System.Linq;
  using System.Text;
  using Microsoft.LightSwitch;
  namespace application
  {

  partial public class Section
  {
         
  SectionDisplay_Compute partial Sub (Ref DateTime result)
  {

  If ((this. Course! (= null) & (StartDate! = null) & (teacher! = null))
  {

  Assign the result to the value of the desired field

  result = String.Format ("{0} ({1}) [{2} - {3}]", Course.CourseName, Teacher.UserName, StartDate.ToShortDateString (), ((StopDate.HasValue)? ") StopDate.Value.ToShortDateString (): "'));

  }

  }
  }
  }
  This is the code. Get the following errors

  Error 1 'System.DateTime' does not contain a definition for 'HasValue' and no extension method 'HasValue' accepting a first argument of type 'System.DateTime' could be found (missing are you a using directive or an assembly reference?)
  Error 2 'System.DateTime' does not contain a definition of 'Value' and no extension method 'Value' accepting a first argument of type 'System.DateTime' could be found (missing are you a using directive or an assembly reference?)
  anyone help me please in this ASAP?

  Hello

  What operating system is installed on the computer?

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums. You can follow the link to your question:

  http://social.msdn.Microsoft.com/forums/en-us/categories/

  Hope this information helps.

• Windows 7 Installer error "Setup could not use the existing system partition because it does not contain the required free space.

  Repeatedly tried to install the upgrade to windows 7 and pure install and get the error message on all partitions available "Setup could not use the existing system partition because it does not contain the required free space.  All 3 partitions on a single disk have over 90 GB and separated from the disc more than 65 GB of free space according to the properties of the disk and initial screen during installation.  Tried to reformat a partition empty all reinstall Xp sp3 without result.  What can I do?

  Remove the data cable of all drives except the drive that you want to install Windows 7 on.

  Remove all external devices.

  Delete all partitions on the disk leave all of the disc as "unallocated".

  Boot from the Windows 7 DVD and then install, when you reach the point where it asks you to select a drive, click the "Advanced" option and create a new partition (at least 50 GB) to install Windows and continue with the installation process.

  Also: http://social.technet.microsoft.com/Forums/nb-NO/w7itproinstall/thread/1b1adc74-3d94-4897-a3c1-7aabde44fe4b

  JS
  http://www.PAGESTART.com

• During the installation of Windows 7 Ultimate, get error, "the installation program could not use the existing system partition because it does not contain the need free space."

  When installing win7 ultimate, {install} error message indicates "Setup could not use the existing system partition because it does not contain the free space required... I have 500 GB free, ram 4 GB 2.4 ghz quad... any help?"

  If you have any external storage devices such as external hard drive or thumb drive, unplug them, they might interfere with installation.

• "" File to error message "does not contain a 32-bit software" what xerox workcentre pe220 installation' pilot

  Original title: xerox workcentre pe220'drive does not work

  I need help. I downloaded xerox workcentre pe220' 32-bit disk. When I try to install, it's been declined (Advisor: folder does not contain software for 32-bit)

  I use windows 7 ultimate 32 bit.

  Could you help me?

  Thank you

  Liana Almeida

  my email: * e-mail address is removed from the privacy *.

  or * address email is removed from the privacy *.

  Hello

  Follow the steps below and check.

  a: Right-click the installation file.

  b: then select run as administrator.

  Hope this information helps.

• Deployment error iTunes (ios Device): the project 'Oracle_ADFmc_Container_Template' does not contain a system called "Oracle_ADFmc_Container_Template".

  I'm trying to deploy my application on an iOS device. Can I deploy on the end Simulator.

  When I deploy, I get the following error:

  [18: 03:34] run command-line path: / Users/username/jdeveloper/mywork/appName/deploy/iOS1/temporary_xcode_project /.

  [18: 03:34] run command line: /Applications/Xcode.app/Contents/Developer/usr/bin/xcodebuild-guichet Oracle_ADFmc_Container_Template archive - archivePath /Users/username/jdeveloper/mywork/appName/deploy/iOS1/Destination_Root/appName.xcarchive CODE_SIGN_IDENTITY = "company name".

  [18: 03:41] orders for next generation failed:

  [18: 03:41] command-line execution failed (return code: 65)

  [18: 03:41] undeployment.

  [18: 03:41] - incomplete deployment.

  [18: 03:41] could not build the iOS application pack.

  [18: 03:41] deployment failed due to one or more errors returned by ' / Applications/Xcode.app/Contents/Developer/usr/bin/xcodebuild'.  What follows is a summary of the returned error:

  Command-line execution failed (return code: 65)

  Orders for next generation failed:

  Check dependencies

  (1 failure)

  If I run the same thing since the terminal I get this error:

  xcodebuild: error: the project 'Oracle_ADFmc_Container_Template' does not contain a system called "Oracle_ADFmc_Container_Template".

  Anyone know what is happening here? I am running MAF 2.01 and XCode 5.1

  It turns out that the error is a bit misleading. The name of the certificate is incorrect.

• Download of AIR for IOS via the Application Loader I get the following error - the package does not contain a file Info.plist.

  I publish a .fla in the AIR for IOS.

  I'm in 2014 CC, so first I need to know what AIR I should publish in?

  more recent is AIR 14.0.0.178 for IOS

  IOS deployment type is App Store

  published with no error.

  I see that the following files included app.xml and .swf

  I converted the .ipa to a zip file

  Download through the Application Loader, I get the following error

  The package does not contain a file Info.plist.

  Here is the infoplist for that and convert the .ipa and the info in a zip file?

  I converted the .ipa in a zip file and the intoplist file is NOT THERE how to generate this?

  Any help here?

  the most recent is 16 +, Download Adobe AIR SDK

• Vista SP1 does not update problems and System Restore returns a message "system restore was not entirely successful. File system and the setting of your computer has not changed"with the error code (0x80071AA7)

  0rignal title: Vista SP1 didn't update problem

  So, recently, I was on my computer of gf and noticed she had some updates, it could use his computer which included the SP1 update.  So I went through the process trying to update his computer and he has been a disaster and have had many problems and seems to have tried everything.  It has a Dell inspiron 1525 and has no CD and no key for its program of Vista.  I burned a Vista recovery disk and tried troubleshooting by using that, but have not had much luck.  When I use the Startup Repair tool there is no nothing.  So I tried to use the restore of the system with the Description of "install: Windows Vista Service Pack 1.  He had a restore point saved just before I tried to update to SP1.  Whenever I chose this method, it's but the whole process then in the end it says:

  "System restore was not entirely successful.  File system and the setting of your computer have not changed. "

  then he begins to list the details with the error code (0x80071AA7) and then gives me the option to close or 'Run System Restore"once again that is an endless loop, because I just end up with the same error each time.  If anyone has had this problem and bring myself through it.  I don't want to reinstall windows because it seems simply ridiculous and plus that she a lot of pictures on his computer and I want to get rid of those.

  If you need more information please let me know and evil provides everything I can

  Hello
   
  Follow the steps and check if the problem persists.
   
  Step 1:
   
  I suspect that your security program may be responsible for this. I would suggest you temporarily disable all security software and try the system restore.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note : Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:
   
  As for installing updates is concerned, I you should install them after you put your computer in aclean boot State. There could be a third-party software in conflict with updates. Clean boot helps eliminate these conflicts.
   
  Note: Restart your machine as usual by following step 7.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Tecra 750DVD: HARD drive does not contain valid FAT or FAT32

  Hi people, been problems since a week now.
  Old hard drive died so installed a new.
  Set startup disk in and it all starts to load and then I get the message "Windows 98 has detected that C does not contain a valid FAT partition FAT32 ot. There are several possible causes.
  Then at the bottom of the three options
  Device not found driver: "MSCDOO1."
  Invalid device CDROM drivers selected
  then
  To get help, type HELP and press ENTER
  A:\ >

  When I type FDISK all I get a message that says
  No fixed disk present.
  So I'm stuck.

  Any ideas suggestions? Can't see a way past it.
  Everyone?

  Thank you

  I assume that you have placed this HARD drive in the laptop, but you have not formatted it.
  If you want to install a Win98 HARD drive must contain a FAT or FAT32 file system.
  I recommend booting from the Windows XP CD and format.

• The food does not contain an image valid podcast.

  Hello

  I asked this question before and the control point was that the image is in https. We addressed it now and the image is http, but I always get the error the food does not contain an image valid podcast. Podcast images must be at least 1400 x 1400 pixels.

  Flow validates correctly as well, although when tested in iTunes, the episode does not show.

  Here is my feed - http://feeds.feedburner.com/accenture/stagemanual

  Thanks in advance.

  I checked in the Podcasts connect and the error is not with the image, but it complains that it cannot download episodes of your EDI. This is because the URL of your media file is

  http://link.videoplatform.limelight.com/Media/?Mediaid=01bc098836b64009915f2aa89 00aa4ab & amp; width = 480 & amp; height = 321 & amp; playerForm = player

  It is a Flash drive. You can't use a player incorporated - you must provide a direct link to the media file. and it's not Flash. For video, it must be .m4v, .mov or .mp4. The file should play in a browser when you enter the URL, not force a download or appear in a player.