Volume of Windows 7

Similar Questions

• Is it possible to adjust the sound volume of Windows to more than 100%?

  Hello

  I have a very simple question:

  Is it possible to adjust the sound volume of Windows to more than 100%?

  I explain why I need to do this:
  I can watch DVD files or .avi with my computer and VLC, that allows to adjust the volume to 100%. Some DVDs have a very low sound. So if I set VLC to 200% volume and the system volume to 100%, I can watch movies in good sound conditions. Then, my computer speakers are strong enough for me watching a movie.

  However, I have a problem with VSD: I use VOD with Windows media player and that player does not allow me to adjust the sound to more than 100%. So I put the sound of Windows media player at 100%, the sound of Windows to 100%, but the sound is very low.

  Please don't tell me to buy speakers, mine are pretty strong, and I find it uncomfortable to plug the speakers.

  Please don't tell me to use a software that increase the volume of the file I want to watch VOD.

  Is there a way to increase the sound volume of Windows to more than 100%?

  Please don t tell me this, please don t tell me that. You want to hear other people's opinions or what?

  AFAIK all sound level settings in Windows are synchronized and if you change the sound level in the properties of the speaker at the same level will appear in the Windows for the Volume Mobility Center and the maximum level is 100%. No more than that.

  As you already wrote the sound level can be increased in combination with Windows and some players.

  Is there any other way to watch these videos, but using WMP?

• Problem with the mixer Volume of Windows: no longer shows the green bars for the application

  Hi all!
  Sorry for my bad English, but it is not my mother language: s
  I have a PC with Windows Vista Ultimate SP2 x 32 with this issue: the volume mixer show me the green bar (indicating the volume level) for the speakers and not for other applications like windows media player, for example.
  Perhaps this screen explains more: http://img11.imageshack.us/img11/4538/immaginevfo.jpg
  I hope someone can help me (if someone understands how I speak English: S)

  Thanks, TheDarkTrainer

  Hi TheDarkTrainer,

  Thanks for posting your question on the Forums of Windows Vista.

  I need more information to help you better.

  1. What is the brand and model of the card its installed on the computer?

  2 - is the first time you encounter the problem?

  For single channel sound cards, you will only be able to see the green bar for Master Volume control and not for other applications such as Windows Media Player.

  Controls on other applications are given to control the volume of the special request regarding the Master Volume control.

  For example, if you scroll the bar to set the Master Volume to 100% and then play a music file in Windows Media Player. You can try to open the mixer Volume and increase/decrease the volume for Windows Media Player, you will notice that the master control will set the green bar accordingly and don't let not the green bar to cross the bar of the Windows Media Player.

  If you disable the control Volume for Windows Media Player, it will automatically make the green bar will disappear from the Master Volume control.

  However, if you have several applications running on the machine at the same time and using the sound card, you can try to change the levels on different controls to see the effect.

  With several cards his channel as sound blasters, it would be possible to see the green bar on individual applications also.

  Hope the information will help. Please post back and we do know

  Thank you & best regards
  Ashish Gupta - Microsoft Support

  ===================================
  Calm sea never make skillful sailors!

• I accidentally deleted a volume in Windows 7! How can I recover the data?

  I accidentally deleted a volume in Windows 7! How can I recover the data?

  I created a retractable partion on "D" Drive and later to try to remove it and accidentally I clicked on "D" drive instead of the new partition! "."
  Any ideas to recover data?
  Thank you
  Amal

  Hello

  You can try this free program; no warranty if.

  http://www.Piriform.com/Recuva

  See you soon.

• Strange location of volume control window

  Usually, when click on the systray icon volume control slider window appears very close the systray.

  In my windows volume slider window is displayed in the center of the screen.

  How to change this when it supposed to be back?

  /JAS

  If you have an AMD/ATI graphics card and if it used to work well and if the problem started after an update of the video driver:

  See if this helps:

  http://thepcenthusiast.com/how-to-fix-restore-volume-control-center-screen-Windows/

  Another way to open the Catalyst Control Center is to click with the right button on an open office area and:

  

• How to extend my C drive volume in Windows 7, so that the disc I want to merge in drive C is not adjacent to the C drive, please help

  How to extend my C drive volume in Windows 7, so that the disc I want to merge in drive C is not adjacent to the C drive, please help

  Jackin salvation,

  Welcome to the Microsoft Answers community.

  When resizing of volumes in Windows7, you must be aware of the following criteria:

  • Only you have the possibility to reduce or enlarge NTFS or RAW (unformatted) partition using Windows 7 tools.
  • When you shrink a partition, files not movable as a page file or a shadow storage area are not resettled. This is why you cannot reduce the size of the Windows beyond volume where these types of files. If you need to reduce the volume, you will need to remove, move or delete the page file or the shadow first storage area, and then reduce the volume and then add the page file or shadow storage on the disk area.
  • If enough bad clusters are found on the disk partition will not shrink.
  • You must be logged on to an administrator account in order to resize Windows Volumes in windows 7.
  
   

  Windows 7 Partitions or Volumes of shrinkage

  This section shows must shrink a Windows volume or partition. To do this, we must open the Windows 7 disk management tool. The following steps will guide you in this process.

  1. Click the button on the Start Menu in the bottom left of your desktop , and then click the Control Panel menu option.

  2. When Control Panel opens, click on system and Maintenance category.

  3. When opens in system and Maintenance category, scroll down and click on Administrative Tools.

  4. Double-click the computer management icon. The console of the computer management will now open. Down, you will see a category called storage and under this category will be the disk management icon, as shown below.

     
  5. Click on the disk management icon, and you will now be in the disk management utility as shown in the figure below. This utility you can see all the partitions on your computer and format, delete, create, develop or resize them. For this tutorial, I'm going to resize the partition E: of 16 GB so that when completed, there is a 8 GB partition and provides another 8 GB of free space I can use for other purposes.

     
  6. To shrink the partition, just click with the right button on the partition that you want to work with and select reduce . In this example, I click right on the E: partition and in the menu that appears, I select shrink.

  7. A screen similar to the one below appears. This screen indicates the size of the current partition you, how you can reduce it to a field where you can enter a specific amount to reduce, and then how big partition will be once it shrinks. By windows 7 default enters the maximum amount that you can reduce the volume, but if you want to change this amount, do so by entering the amount in MB in the enter the amount of space to shrink in MB: field. When you are satisfied with how windows 7 will shrink the partition, click the minimize button.

     
  8. Once windows 7 is complete decreases the volume, you will be in the disk management screen, but now the partition size will be the size you requested as shown below.
  

  Now that you have reduced the size of your volume of Windows, you can close the computer management console.

  You have now finished reducing your score and you have the extra space available for use as required.

  Windows 7 Partitions or Volumes extension

  This section shows that you must extend a Windows volume. To do this, we must open the tool of disk management where we can resize our volumes. The following steps will guide you in this process.

  1. Click the button on the Start Menu in the bottom left of your desktop, and then click the Control Panel menu option.

  2. When Control Panel opens, click on system and Maintenance category.

  3. When opens in system and Maintenance category, scroll down and click on Administrative Tools.

  4. Double-click the computer management icon. The computer management console will now open. Down, you will see a category called storage and under this category will be the disk management icon, as shown below.

     
  5. Click on the disk management icon, and you will now be in the disk management utility as shown in the figure below. This utility you can see all the partitions on your computer and format, delete, create, develop or resize them. For this tutorial, I'll extend the E: partition so that it uses the rest of the available space on the disc 1.
     
     
      
  6. To extend the partition, he just click right-click on the partition that you want to work with, and then select the Extend option. In this example, I click right on the E: partition and in the menu that appears, select Extend.

  7. A wizard appears as shown below. Press the Next button to continue.

     
  8. A new screen, shown below, is displayed allowing you to select the free space available on your local hard disks that you can use to extend the space of the selected partition. It is important to note that Windows 7 allows you to extend a volume using free space on the same drive as well as the other disks. I strongly suggest that you do not extend a volume on a disk with free space of the other. It is because if one of the disks has a hardware failure, then all data on this volume will be removed. Rather just to use the free space on a drive that contains the volume you extend
     .

     

     As discussed in step 5, for this tutorial we are going to extend my 8 GB partition (drive E :) to the total size of disk 1 using all the available space. As disk 1 is only available free space on my computer, windows 7 automatically select as shown in the image above and use the maximum amount available to extend the partition. If there were other drives with free space that they have shown during the selection available . If you want to extend the volume to a lower amount you can change in the Select the amount of space in MB: field. In the contrary case, press us the button Next .

  9. You will be now be presented with a confirmation screen. If you are sure you want to extend the volume, press the Finish button. Otherwise, press the back button to make changes or the Cancel button to cancel this operation.

  10. Once Windows 7 completed to extend the volume, you will be on the screen disk management, where you can see the amount that you have extended with the new size. An example of this is shown below.
  

  At this point, you can close the Management window of the computer that your task is completed.

  Hope this information is useful.

  Let me know if it worked.

  Thank you, and in what concerns:

  Umesh P - Microsoft Support

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Volume controls Windows 8.1 does not

  I have known problems with control of volume with Windows 8.1. I have noticed, regardless of which player media I use, that the volume in the drive control does not affect the output up to what he gets 10 or less (out of 100). When you do that, it falls drastically to where I imagine the volume level of 10 would be properly. This happens even when my main laptop volume is defined.

  I do not use any kind of volume normalizer limiter/compressor in one of these programs, nor I use all Windows Communications volume reduction options (mine is set to "Do nothing"). I also use not all enrichment equalization loudness on this sound card, since she is not even in development options. It is native to the Windows OS.

  I use the programs include: Windows Media Player, GOM Player, and VLC Media Player.

  The main volume of the laptop still work correctly, but I would like to have control of the audio volume and individual programs. It is of course apart from the fact that it should operate correctly regardless of how I want to use them.

  Has anyone else noticed and lived this glitch? Can anyone offer any advice that might explain or correct this problem?

  Thanks in advance.

  1, windows has never been set to use several media players, he told

  problems with the operating system... In addition, chk this link microsoft on volume control.

  https://TechNet.Microsoft.com/en-us/magazine/2009.05.wincon.aspx

  Also, try to run or cmd, type: DXDIAG run Direct X audio tests

• Disco of VmWare Converter problema su spazio - ERROR: failed to create a snapshot of a volume of the source. Possible causes include not seen all NTFS volumes on Windows XP or Windows 2003 source systems with no is not enough free space on the disk.

  Buongiorno,

  Devo connvertire con vmware converter one Nt Server con AC 450MO di spazio libero su disco C: ntfs file system e

  Ricevo this error:

  ERROR: Impossible to take snapshots of a volume of the source. Possible causes include not seen all NTFS volumes on Windows XP or Windows 2003 source systems with no is not enough free space on the disk.

  He problema e che no ho the possibility di līberō altro spazio.

  Some suggestions?

  Grazie in pre-empted.

  Anni fa it era questa versione di VMware Converter: https://dl.dropboxusercontent.com/u/2197180/coldclone.3.03.iso che permetteva the clonazione a freddo. :-)

• Determine the free space on the volume of Windows

  CF 8 does load means simple to determine disk space on a volume under Windows 2003? I did via CFEXECUTE cmd.exe "dir/w" and the result of analysis, but there must be a better way. Maybe w / Java object?

  Try using java.io.File. Read the api for applicable exemptions.
  http://Java.Sun.com/javase/6/docs/API/Java/IO/file.html#getFreeSpace)

  
  
  

  
  
  Total = #byteConvert (total, "MB") #.
  free = #byteConvert (free, "MB") #.
  

• I have no./very low volume on windows media player

  I also no./down volume on hotmail, when I try to view parts enclosed/video downloads

  Hi AnthonyRicci,
   
  -Were you able to hear the audio without any problems in Media Player?
  -What version of Media Player do you use?
   
  Try these methods and see which one of them helps to fix the problem.
   
  Method 1: Make sure that the equalizer is balanced
   
  If the equalizer is rejected, you may experience sound related problems.
   
  To check this setting:
   
  a. click view, improvements, graphic equalizer. Once the graphic equalizer is displayed, make sure that all settings are at least halfway.
   
  Method 2: Check the settings of the sound
   
  Verify that your settings are correct. When other software programs, it is possible for bad programs adjust settings audio, causing problems with your sound.
   
  Method 3: Update Windows Media Player
   
  Try to update the media player to another version and check if it helps.
   
  For problems with Hotmail, post your request in the Forums of Hotmail.

• Purchasing licenses in volume for Windows XP

  I understand that Microsoft, selling more than XP, but you can downgrade to XP from Windows 7 proffessional.  I am in need of 10-20 licenses of Windows XP and would like to know what my options are.  Individual purchase a copy of Windows 7 and it downgrade to Windows XP or go with volume licensing.

  XP is not available as a retail sale. You must speak with Volume Licensing.

• The audio volume with Windows XP Pro. Result of the SP3 distorted audio recorder?

  Hello.

  Is it me or don't drop result audio volume of my WAV in a Windows XP Pro update. SP3 sound recorder? Is this a bug in this program or something else?

  Also, does anyone know a good free audio program that will make lots more low audio volume in a bunch old WAV files? One is a pain in the abdomen end-to-end. :(

  Thank you in advance. :) Ant @ Ant links fed quality (http://aqfl.net) and The Ant Farm (http://antfarm.ma.cx).

  Audacity will do what you want - a good. Its freeware and is a full blown audio editor. You need to normalize your track and to use a negative value to reduce the volume.

  http://Audacity.sourceforge.NET/

  One thing though: If your wav file already has a built-in distortion (that is to say "clipping" - when some parts of the song go above 0 dbl and so distort) nothing you do will get rid of the break of the said.

  You can see this by looking at the waveform track in Audacity. Is there is no flat areas where there should be highs, and they are above 0dbl then your track is cut off and there is a high risk of distortion. Is there is no flat areas (only the peaks) then your track should be ok (as long as they are not above 0dbl) and you can 'normalize' it.

  Try Googling "normalize batch file" (or similar), you can find what you want.

  See you soon,.

  Denys

• Need help as soon as POSSIBLE! I can't turn the volume on Windows Live Movie Maker and video is slow

  I'm reading a file .mov on Windows Live Movie Maker 2011 Version (Build 15.4.3555.0308). I had to install the media player codec pack (version 4.2.3.1001 the file) in order to get the video to play on WLMM and he finally managed to where I could see the video, but now will not play sound. I went into Edit and the Volume of the video and mute is activated, but he won't let me not reactivate the sound by clicking on it. The scroll bar can slide backwards, but does not make a difference. Already, I went and "repaired" Windows Live Movie Maker in my programs. The video has sound when he played on Windows Media Player isn't the video or the speakers.

  In addition, the video is very slow and jumpy. It's almost as if it was in slow motion or something.

  Help, please!  I need to have this video made as soon as POSSIBLE. I need to be able to start editing here tomorrow!

  Thank you
  Tamara

  I'm reading a file .mov on Windows Live Movie Maker 2011 Version (Build 15.4.3555.0308). I had to install the media player codec pack (version 4.2.3.1001 the file) in order to get the video to play on WLMM and he finally managed to where I could see the video, but now will not play sound. I went into Edit and the Volume of the video and mute is activated, but he won't let me not reactivate the sound by clicking on it. The scroll bar can slide backwards, but does not make a difference. Already, I went and "repaired" Windows Live Movie Maker in my programs. The video has sound when he played on Windows Media Player isn't the video or the speakers.

  In addition, the video is very slow and jumpy. It's almost as if it was in slow motion or something.

  Help, please!  I need to have this video made as soon as POSSIBLE. I need to be able to start editing here tomorrow!

  Thank you
  Tamara

  ========================================
  Apple QuickTime. MOV video files were problematic
  in all versions of Movie Maker. Best bet would be to convert
  the. MOV files to the. Before you import into WMV format
  Movie Maker.

  There are to many converters available on the net... both retail
  and freeware... the following freeware converter is an example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)
  (* Read * all * the installation screens... it)
  may be a few items you want to unmark *)

• SAN reports nearly full volume. Windows reports volume only 50%

  PS6000 v7.0.9

  2 host of 2012 R2 Hyper V Server Cluster

  The volume is 620GB

  Director of Group reports 525GB in use

  Management of Windows disk and the two report 349GB in use failover cluster manager.

  Why the difference and where/how I have not these 175 GB?

  Because you use iSCSI to the EQL which is a block of storage. The EQL is not that someone gave above deleted. If a deletets OS given it just the brand like deletet in the allocation table.

  Think when formatting a disc format and NOT the quick HELP. The operating system writes zeros and for storage, it looks like valid data... but the OS it will appear as free space later. For the EQL Volume, that means 100% usage.

  Windows 2012R2 supports unmap aka space recovery. It depends on your FW EQL and HIT Version and a few other dependencies as Thinpro Volume on the EQL iirc. With that you say the EQL blocks can be removed to obtain a logical space left.

  Concerning

  Joerg

• Cannot increase the size of the volume of windows

  Hello

  I increased the size of the volume in Dell EqualLogic Group Manager (GUI). On windows, I see that volume capacity is 200, but it does not increase the size of 200 GB. After scanning disk total size shows that only 100 and not any unallocated space available size. Is - this 2012 windows bug? don't know where to start troubleshooting. The server cluster connection is via iSCSI.

  I see unreserved space EqualLogic, but not in windows,

  Thank you

  Hello

  It * should * work, but it seems that perhaps services cluster prevents the operating system of new reading ability.  Could take a failover or even restart the cluster nodes so that it can see the new space.

  If you have the support of MS, it would be worth a call to them as well.