Volume on 8 GB Fuze problem

Similar Questions

• Freezing Sansa Fuze problem

  I have a 4 GB Sansa Fuze with the latest firmware and after about 6 months, he started to have this problem of gel. I don't know what happened exactly, but I unplugged it from my PC once, and when he went to 'Media refreshing' just of freezes and does not load. And now, when I plug it into my PC, it freezes on the screen that says 'Written' and hangs whenever I log on my user account. I believe that this is due to a damaged file from when I had a virus problem, however, because when it connects to my PC, it won't let me format.

  Thanks for the suggestions guys, but I could get my rocket using my Xbox 360 work. That's what I did:

  (1) I have connected to the USB cable from the "rocket" and then connected it to the USB for 360.

  (2) I went to my Xbox, the Control Panel, memory

  (3) I clicked the USB storage device and you click on configure to 360 (to 256 MB)

  The Xbox managed to erase all data, including files that never seemed to corrupt, and got, it works again. You may want to format again when you use your PC, or install a new firmware, because the device has been configured for Windows use after you configure it the 360

• Dell Xps 17 straight pregnant L702x a whistling noise + sometimes it loses volume? What is the problem?

  Hello

  I am faced with an irritating problem, I noticed that my right speaker sometimes will decrease volume, and then after awhile, it will return to normal volume / or I believe it loses low, which means that the sounds of the left speaker stronger, then the right speaker. Last night I noticed there was a crackling sound from the right speaker, it wasn't strong, but when the room is quiet then you could hear it. I don't know if the problem is on the right speaker.

  Can someone please guide me to know what's the problem, my warranty just ran out last month so I have to be on what the problem actually is the first

  James192131

  I didn't notice this before but my helmet is loose, for example if I plug my headphones into the Jack, you don't need no strength at all to stick it in and out.

  Maybe you should look into getting an extended from Dell warranty.

  If you ever decide to work on it, you can get the part with the audio of people parts (parts of Dell specialists). They also have the left/right speakers for $15. Their parts are mainly used, but a guarantee.

• The volume control in the mixer Volume for Skype is always set to very low for new calls.

  Hey all!

  It's really annoying to have to adjust the volume in the Volume mixer upside whenever there is a new call. I have no volume of speakers set to automatic in the options, and I have no idea what else controls the adjustment for volume.

  It is not enough that Skype (now a Microsoft product) can't understand the audio, I use as ANY OTHER program (i.e. for other programs to plug my headphones is enough sound to be redirected here but NOT for Skype. For Skype, that I have to go into settings and change the sound output device!). I use Skype for a few years due to its good call quality, but if I can't find a solution for this I have to change to another similar product.

  My system is a 64Pro of Win7.

  All ideas will be more appreciated!

  CAK

  Eureka!
  
  There is a setting in Windows 7, I don't know about other versions - (tab Communications/sounds/Control Panel that tells Windows to automatically reduce the volume of other sounds when the PC is used to place or receive calls.

  Skype is SO smart that it reduces the volume of itself too when there is an incoming call, and so all incoming calls have a lower volume.
  
  To solve the problem simply to set the option to "do nothing"...

  .. .and continue looking for alternative software replace Skype. Unfortunately Ms. are actively trying to destroy a good thing...

• Uninstallation of Volume license key

  Hi randy cayko,.

  It seems that your problem is similar, but differs from the original question. Please start your own question and provide the details of your problem so that we can help you.

  http://social.answers.Microsoft.com/forums/en-us/XPInstall/threads

  Thank you.

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  Uninstall the volume license key!  My problem is: I have an older version of windows xp, there is a stivker on what said designed for windows from microsoft 98' I'm trying my best to upgrade to all new windows stuff, keep in mind, I don't know anything about computers!  everything is upgraded to what I'm doing! but everthing that I said that I have a vlk that is blocked! I am trying to download internet explorer 8 and the service pack 2 update, and it won't let me do no more! Please help me! can you just send me a (easy button) or a way I understand, to remove or uninstall vlk! Help, please! Merry x - mas, randy.

  English version: http://support.microsoft.com/kb/328874/en-us

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Problem with driver

  My system often hangs during startup and whenever I have to search for solutions to windows problems and solutions it tells me that it is a driver problem. He told me to look in the event viewer and find the bucket from the fault to determine the device that is causing the problem. I went and found this:

  fault bucket 0x50_nvlddmkm. CNvDispChannelDmaHal::pushCmdDat + 12, type 0

  Does that mean something to someone? I tried a search on the forums and come up with no results. Would appreciate any help.

  James

  Hello

  Bug_Check BCCode: 50 0 x 00000050

  Update the Nvidia video driver:

  NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA Support - check with the support that she might be a known issue
  http://www.nvidia.com/page/support.html

  NVIDIA forums - also check for the forums it might be a known issue or others likely to have
  http://forums.nvidia.com/

  -----------------------------------------------------------

  If additional troubleshooting is required:

  For information on using BlueScreenView and MyEventViewer to troubleshoot Bluescreens see methods
  stated in this thread - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  -------------------------------------------------------------

  References to Vista also apply to Windows 7.

  Have you recently added any hardware? Have you updated any drivers just before this started? (Check
  Panel configuration-updates of Windows to see if all drivers have been updated it there all the time it started)
  Main likely culprits are video driver, other great drivers, memory and antivirus/antispyware/security
  products could be at fault as well as reader questions.

  Use the troubleshooter below and refer to the following message to drivers and memory when you get to
  These sections and then back to the resolution of the problems according to the needs.

  BCCode: 50 0 x 00000050

  Cause

  The BCCode 50 usually occurs after the installation of the installation of a faulty material or failure of
  material (usually associated with defective RAM, either main memory, L2 RAM or RAM video cache).

  Another common cause is a defective system service installation.

  Antivirus software can also trigger this error, as can a corrupted NTFS volume.

  Solve the problem

  Solve a defective hardware problem: If the material has been added to the system recently, remove it to see
  If the error recurs. If the hardware failure existing, remove or replace the faulty component. You must run
  Diagnostics of material provided by the manufacturer of the system. For more information about these procedures, see the owner
  Manual for your computer.

  Fix a defective system service: Disable the service and confirm that this resolves the error. If so,.
  Contact the manufacturer of the system service on a possible update. If the error occurs during the system
  startup, restart your computer, and then press F8 at the menu character mode that displays the operating system
  choice. In the Windows Advanced Options menu that results, select thelast known good Configuration
  option. This option is most effective when a pilot or a service is added at a time.

  Solve a problem of antivirus software: Disable the program and confirm that this resolves the error. If she
  is the case, contact the manufacturer of the program about a possible update.

  Fix a corrupted NTFS volume: Run Chkdsk /f /r to detect and repair disk errors. You must
  Restart the system before the start of the analysis of disk on a system partition. If the SCSI hard disk, check for
  problems between the SCSI controller and the drive.

  Finally, check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the error. Disable the cache in memory of the BIOS might also resolve it.
  
  BCCode: 50 0 x 00000050<-- read="" this="">
  * 1095.html? order = votes http://www.faultwire.com/solutions-fatal_error/page-fault-in-NONPAGED-Area-0x00000050-

  ------------------------------------------------------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Z2 turns on the volume in silent mode?

  Hello

  My Z2 phone began to turn for the notification and volume setting in itself. How to fix this bug?

  I went through the settings and set all sounds off, but after an hour or two, it's bacn at normal volume. Have had this problem for a week now.

  Have restarted the phone several times.

  Deleted all the apps.

  Nothing helps.

  @PetterPan,

  In the link that @uliwooly provided review #4, do not disturb. Although DND is activated you can have certain exceptions, such as calls and messages will still make noise if activated.

  Although it is in safe mode, do what you were doing before checking if the ringtones and notifications etc are still making the noise.

• Volume control causes trouble high priority thread

  A few weeks ago, when I was finishing my "Flix" app and adjust the priorities of the threads, I noticed that the wire audio high priority interfered with the volume buttons of the PlayBook. Specifically, it could support you on a volume button and nothing would happen, at least not for a second or two. It was as if the priority of the audio thread was so high that it prevented the OS to respond to the pressure on the hardware button to the user.

  This week, the behavior is quite different: the volume controls work fine, but as soon as you press on one of them, the audio wire starts to fight, and the audio gets all the "poppy/static ' y '.

  The really strange thing is that even though the notification of change of volume disappears from the screen, the sound remains ' poppy/static ' y ', as if the volume permanently change event interferes with the audio wire.

  I was wondering if the OS was lowering the priority of the thread on an event of volume change, but I think I have excluded that... when I ask the audio thread for its priority, remains at 63 before and after the events of volume change.

  So it is obviously very confusing... How the hell a single volume change event could interfere with the audio thread of the application until the end of the execution of the application? (Even if the application gets a "break" due to need extra buffer audio and video, as soon as the audio continues, it is always static'y)

  The other thing that may or may not be related, it's that last week my PlayBook prompted me that there is an update of the OS.  The strange thing is that the version of the update seems to be exactly the same as the version of the operating system I had, and it was only 3 MB. I can't help but wonder if this is somehow related to the change of behavior that I see.

  Any help would be most appreciated.

  Thank you!

  Daniel

  I finally understood how to prevent the volume control to cause audio problems.

  Here's the long answer:

  -My app plays WAV files back to back. There was a slight "couture" in the audio that I tried to get rid of.

  -A point I tried removed calls to snd_pcm_open and snd_mixer_open whenever a WAV file has been played, thinking that maybe something to do with the small gap in the audio.

  -I didn't know at the time, but I think it's when editing of the volume begun resulting in distortions on the audio.

  -Distortions are prevented by listening to events of volume change, and when it is received, ensure what I call snd_pcm_open and snd_mixer_open to the next WAV file playback.

• Adding additional iSCSI Volumes?

  I have a cluster of 2 esx 4.0 host connected to an equallogic SAN.  Currently, the ESX hosts are connected to 1 volume on the equallogic and he VM 10-15 running using equallogic volume.  I created a new volume on the equallogic and configured to allow access of the two hosts.

  My question is the following: to add the new volume for ESX hosts, should I simply go to each iSCSI host initiator and do a rescan "volumes"?  Is there any problem that would affect the other connected volume or the virtual machine; s that are on it?

  Thank you

  My question is the following: to add the new volume for ESX hosts, should I simply go to each iSCSI host initiator and do a rescan "volumes"?

  That should do it.

  Is there any problem that would affect the other connected volume or the virtual machine; s that are on it?

  I've never had one with EQ and renumerisations - you should be fine here.

• Levels of volume using the external cursor issues

  Hello

  I have a video player that requires all controls various outside the .swf via javascript and CSS.  The volume slider that I use will show a range of values depending on the position of the cursor.  What I need to do, is to have this past via ExternalInterface.addCallback("IsStatic",IsStatic), making a little now, however the actual value is not volume control.

  JavaScript:

  function thisMovie (movieName) {}

  If (navigator.appName.indexOf ("Microsoft")! = - 1) {}

  return window [movieName]

  }

  else {}

  return document [movieName]

  }

  }

  {$(function()}

  var cursor = $('#slider'),

  ToolTip = $('.tooltip');

  ToolTip.Hide ();

  Slider.Slider ({}

  range: "min."

  min: 1,.

  value: 35,.

  Start: {function (event, ui)}

  tooltip.fadeIn ('fast');

  },

  slide: function (event, ui) {}

  var value = slider.slider ('value'),

  volume = $('.volume');

  ToolTip.CSS ('left', value) .text (ui.value);

  If (value < = 5) {}

  volume. CSS ('background-position', ' 0 0');

  setVolume (value);

  document. Forms ["myForm1"]. Input.value = value/100; output to html field trial to see what value

  }

  ElseIf (value < = 25) {}

  volume. CSS ('background-position', ' 0 - 25px');

  setVolume();

  document. Forms ["myForm1"]. Input.value = value/100; output to html field trial to see what value

  }

  ElseIf (value < = 75) {}

  volume. CSS ('background-position', ' 0 - 50px');

  setVolume();

  document. Forms ["myForm1"]. Input.value = value/100; output to html field trial to see what value

  }

  else {}

  volume. CSS ('background-position', ' 0 - 75px');

  setVolume();

  document. Forms ["myForm1"]. Input.value = value/100; output to html field trial to see what value

  };

  },

  stop: {function (event, ui)}

  tooltip.fadeOut ('fast');

  },

  });

  });

  function setVolume (value) {}

  var intVolume;

  value = intVolume;

  thisMovie("VideoPlay").setVolume (intVolume/100);

  thisMovie("VideoPlay").setVolume (value);

  };

  With the AS3 value

  const DEFAULT_VOLUME:Number = 0.6;

  ExternalInterface.addCallback("IsStatic",IsStatic) ("setVolume", setVolume);

  in the init function

  setVolume (DEFAULT_VOLUME);

  function setVolume(intVolume:Number_=_0):void

  {

  var sndTransform = new SoundTransform (intVolume);

  nsStream.soundTransform = sndTransform;

  If (intVolume > 0)

  {

  mcVideoControls.btnMute.visible = true;

  mcVideoControls.btnUnmute.visible = false;

  }

  on the other

  {

  mcVideoControls.btnMute.visible = false;

  mcVideoControls.btnUnmute.visible = true;

  }

  }

  The Flash-based volume slider works without any problem.  The version of Javascript, when I go to move the cursor, the output shows a value of 0.02 a.99, I thought this would be the correct range to SoundTransform.  However, the actual result audio, it is that the audio goes to the else statement in the setVolume function and cut the sound.

  Summer banging my head on the wall with this one for awhile and I can really understand how to get only the volume not to mention finding anything similar via research.  Any help would be appreciated.

  Thank you!

  With a third look, in fact, this is probably what will do the job:

  slide: function(event, ui)
  {
            var value = slider.slider('value'), volume = $('.volume');
            setVolume(value);
            document.forms["myForm1"].input.value = value / 100;
            tooltip.css('left', value).text(ui.value);
  
            if (value <= 5)
            {
                      volume.css('background-position', '0 0');
            }
            else if (value <= 25)
            {
                      volume.css('background-position', '0 -25px');
            }
            else if (value <= 75)
            {
                      volume.css('background-position', '0 -50px');
            }
            else
            {
                      volume.css('background-position', '0 -75px');
            }
  }
  

• History a catalog between volume of sharing folders?

  Setup: I worked on my 'Volume A' images in the past.

  I set up just a pair of disks 1.5 to inside of my workstation (MacPro) and now have the same series of images, "Volume A", on one of the new internal drives. One of the new disks, 'Volume B' will now be my player 'work' to continue my editing on.

  Question: I want that history States AND my snapshots from the images that I had edited using 'Volume A' as my work drive is visible in history and snapshots ("Volume B") windows new drive '- Details exactly as they exist when I look back at history and snapshots of A Volumerendered! Is it possible for me to do this w/Lightroom 2?

  Now things:

  ( 1) in the "Volume A" history and snapshot windows I see all my details of mounting of the drive (original)...

  ( 2) whereas in the News ("Volume B") story reader and snapshot windows I don't see that the import of today (in the historical Panel) and 'Import', 'import 2' in the Snapshots Panel. It's NOT what I want to see. I want to see exactly what I, had made in windows history and snapshots of the original volume work! (I often go in back-and-forth between past history has weeks or months later, to experiment more, and then save the new pictures that I revisit work.)

  Any easy (or bypassed) fix to this?

  Thanks in advance, mm

  It is a confusing request to me.

  You want the story in both places? So, somehow, you can work on Volume B, and at other times to work on the Volume? I have a problem with this idea, it does not make sense to me.

  If I understand you correctly (and I'm not sure I understand you correctly), you want to copy your catalog of Volume for Volume B file, not to import new photos on Volume B. Original photos must be in both places, just the catalog file. This will give you access to your photos on the two volumes... via LR and then keep synchronized is an exercise that I leave to you, because I do not really think about the complexity of this.

  But, if you "often go back-and-forth between the history States several weeks or months later, to experiment more and then save new snapshot", you need only one catalog on a single Volume to do. Trying to recreate the configuration of your whole on Volume B is the solution "killing an Ant with a nuclear bomb.

• OMEN of HP laptop: my inst his cell phone works properly.

  So, I bought this computer some time ago, and I noticed now that my speakers is not working well. The sound reproduced by them sometimes (usually when I turn on the computer they work well) train, breaks down and makes strange noises. The volume also decreases. The problem does not occur with a wired headset. Any piece of what I need to do to fix this? Thank you.

  Hello

  Try the following.

  Download Realtek HD Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp75501-76000/sp75983.exe

  When finished, press and hold the Windows key and press R

  In the run window, type devmgmt.msc and press to enter.

  In Device Manager, expand sound, video and game controllers.  Right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp76501-77000/sp76608.exe

  When the reinstallation of Chipset has completed, restart the laptop.

  When windows has reloaded, open your download folder, right click on the installer of Realtek and select "Run as Administrator" to launch the installation.  When he finished, restart the computer again and let windows to load completely for a few minutes before checking it in.

  Kind regards

  DP - K

• Cannot install the update of El Capitan 10.11.3 (Stuck in gray screen)

  I have problems to install the update of El Capitan 10.11.3. Whenever I hit reboot the Mac tries to stop and gets stuck in a dark grey screen. The mouse cursor is visible and mobile. Special keys (sound, light) and layering seems to work.

  What I've tried so far:

  First time I waited like half an hour, then restart with start button / stop and normal startup.

  I tried to set the command: sudo/usr/libexec/repair_packages - repair - standard-pkgs - volume.

  The same problem.

  I unplugged all USB devices.

  The same problem.

  I tried to update in safe mode.

  The same problem.

  So what to do then?

  Are there protocols and where to find them? The update file may be corrupted, so how can I redownload it again? Any other ideas?

  This is an iMac mid 2011, 27 ", there are backups Time Machine.

  The root of the problem was perhaps not the update itself. For me, it was impossible to shut down or restart as normal. There was a problem with a program called SoundFlower maybe. I was not able to uninstall completely.

  I solved the problem for me in restoring a backup Time Machine and then applied the update.

• Can not start up and the utility disk first aid failed

  I have an iMac 27 "retina 5K (end of 2015) El Capitan (10.11.2) and 10 Windows via Bootcamp.   This morning when I had finished work on the Windows of the machine side, I tried to start in El Capitan, but it failed silently and turned off the machine itself about the 2 minute point.  I tried new and same problem.  So I checked if I could go back to Windows and ran 10 Windows without problem.  Then I started in the Mac recovery partition to run disk utility and it revealed a considerable number of errors on the Macintosh partition such as:

  -Previous ID in a string of hard link is incorrect (ID =-1130612101)

  (it should be 3164355194 instead of 0)

  Several of the above errors appeared with different numbers

  -Volume bitmap minor meds of repair for orphans blocks

  -County of block free invalid volume

  -Volume header needs minor repairs

  -Lack of notice of thread (id =-1130634630)

  Several of the above errors appeared with different numbers

  Finally the process 'done' with the 'first aid process has failed.  If possible to backup the data on this volume.

  Then I started in an installed USB version of the El Capitan, and while it was successful, he launched a warning when he mounted the volume that I had the problem with: "OS X cannot repair the disk"Macintosh HD"" but I was able to copy the files from this volume and even run applications that have been stored on it.  Tried to run disk utility and first aid in vain as above.

  So here are the questions.

  1 should I guess that nothing can do otherwise erase that partition and reinstall El Capitan?

  2 delete the partition and reinstalled El Capitan will affect my Bootcamp partition or the ability to use Win 10?

  3. I have a Time Machine backup. restore it re - will present the same problem?

  4. I have never had such a massive and unrecoverable failure on a Mac drive and I had used it the day before without problem.  Should I assume that the drive itself is defective and have it replaced?  I ran an Apple Hardware Test and were not problems.

  1 fix

  2. Yes

  3 NO.

  4 NO.

  Back up all data on this disc, including your Bootcamp partition.

• Is there a way of Pages to add comments to references?

  I use Pages 5.6.1. with OS X Yosemite. Add comments about the main text - I am editing a volume of articles - is no problem. BU I don't seem to be able to add comments to the notes.

  You cannot place a comment on the value of the exponent of a note, but you can select the text belonging to the note at the bottom of the page and make a comment. Click to enlarge.