Freezing Sansa Fuze problem

Similar Questions

• "Sansa Fuze v2 freezes on ' update your media.

  I had this problem since I got it earlier this year.  I tried to solve this problem in many ways.

  First I thought it was a problem to do with the tags which many of you have told me, but after having systematically organize every single audio track, remove all comments, artist information, album art, composer and using mp3val error check each audio track the problem still remains.  The only information on each track are kind, year, song title, artist, album name and track number (this I did on Mp3tag and saved ID3v2.3 ISO-8859-1).

  The sansa fuze that I is a model of v2 4 GB with a MicroSD of Kingston 16 GB card.   Honestly I am so sick of having to choose who I want to because music the largest number of songs I had on it without it freezing songs s 560 - I would add that most are mp3, some are in flac.  It's less than 6 GB on the 20 GB I have available which is ridiculous because the point all I got a rocket was so that I could increase its capacity without having to buy expensive media players

  I have tried updating to the latest firmware but back to 1.02.26 because the problem remains to be 1.02.31.

  Good because it will probably be easier to read and make more sense if I just list this information (instead of try to structure some sort of coherence).

  D ' other information that may be useful, it's that I have no video, no photos.

  -The problem seems to occur after a threshold of the number of songs I have.  For example, when I transfer an album more and it freezes / hangs on the screen "refreshing your media", I have to force it to shut down by pressing the power switch.  Most of you might be thinking that it is again with the offending audio tracks (bad tags etc), however I found that if I remove some albums and try put on the same album, it will be no problem to do.  Only after reaching a certain number (?) of songs that seems to happen.  I'm not going to say as a fact that I'm not 100% sure of that.

  -After the screen "refreshing your media" frozen that I have to go back and remove all of the albums, I added which causes the problem.  This might appear as normal except there is no audio data files just an empty folder with the name of the album.

  -All titles scanned with mp3val as having 'problems', I removed permanently of the device.

  -All the music is transferred in MSC mode - drag and drop

  -It never freezes if I transfer audio files to the internal memory.  For example, the album which causes the freeze/hang up can be placed on the internal memory of sansa fuze - no problem

  For the love of all things good someone can you please help me solve this problem, I'm sure this can be fixed.

  I will update that I can't imagine all the things I've done

  Thank you

  
  

• Sansa Fuze 4 GB Black / Video Converter problems

  For Christmas, I got a 4Gb black Sansa Fuze, I downloaded Sansa Media Converter, Moyea Youtube Downloader, Sansa Updater and all video Converter(trial version) and K-lite codec pack. I tried to get videos on my Sansa Fuze, but when I try to add a video to the converter it says something like lla I can use some help!

  "The video cannot be added to your library because Sansa video converter does not support the file you are trying to add, or the file is currupted."

  I tried all types of formats (AVI, WMA, etc.) to get the converter to read and I also tried (Mpeg-4, Ogg) and still nothing worked, if the bad codec yet? or maybe it's my converter (Sansa) screwed up in the download?

  It does not work because the material is not included in black Sansa rockets to video support.

  None! I'm just messin 'with' ya, but I always laugh when I see a poster has to tell us what color is their player. As if it really made a difference, or is relevant to the problem that they encounter you, or that a different diagnoses or an appeal would be dependent on the color of outer case. Probably 60% (or more) of all messages 1 with the new members include this vital information in the first sentence.

  Now, to get to your question... have you tried Video4Fuze or FuzeVidz?

• Sansa Fuze V2 problems wheel [HELP PLEASE]

  So, I recently got my Sansa Fuze.  I was very happy with it.  Initially, I had some problems, but I sucked in and resolved.  Although now, the wheel of my sansa fuze is what I believe to be, die.  The drive itself is not even a month, and I do not use it pretty close.  The LED around the wheel is really go wacko.  The whole circle LED flashes, and the lower right corner of the wheel would not light up unless I actually press on this subject.  I had this problem before, but I found that the sides were loose and that I just pressed it back, which made the point.  2 weeks after it happened.  I don't know what is happening.  I have searched, but nothing was very useful for me.  Is there a way to fix this?  In addition, how would I know if my drive is still under warranty?

  You say you have "recently." How recently? It is probably still under warranty (1 year in the United States). This looks like something that will do better or that you can fix yourself. It's a hardware problem; call that SanDisk technical support and they'll most likely replace them for you.

• Sansa Fuze 4 G v.2.02.28a wrong with gel, formatted and reinstalled the firmware

  My sansa fuze has been freezing since update firmware a couple of months.  Sometimes he would set himself, when I rebooted, but it gets progressively worse.

  Today it froze to the homescreen as usual, but I could not turn on after I restarted several times, after many trials, I could connect to my pc without the "rocket" freezing at the login screen. I decided to format it through my pc and I also reformatted it on the player as well. I have not reformatted it since adapting if I was trying to avoid having my deleted files. Meanwhile, I looked in the forums to apply solutions that have worked for others in the same situation.

  Here are some of my problems I think to make this kind of odd. Windows tells me is no longer a memory, internal and external, it reads the interns as F: drive and the external slot as drive G:

  Also, I have a napster to Go account that I use for a year now synchronized with this player and he wrote the unit (the "rocket") is not compatible, and I tried the update of napster to see if that was the problem, but napster has been giving me trouble since the new update with the firmware of the rocket. However, now I am not able to re - download my music files without paying the full price for one without a subscription.

  I think that the problem comes from the "rocket" as opposed to my napster account. Any information on this would be great.

  Thanks in advance.

  Have you tried switching USB (Settings/System Settings/USB Mode) mode to PSG?

  If not, why not roll back manually. Just unzip the firmware.26 and drop the .bin file in the drive of the rocket.

  http://forums.SanDisk.com/Sansa/board/message?board.ID=sansafuse&message.ID=23276&query.ID=69476#M23276

• No sound on computer, using SanDisk Sansa Fuze 8 GB Media Player Silver

  MyComputer has no sounds

  original post: SanDisk Sansa Fuze 8 GB Media Player Silver

  Hello

  • You receive an error message?
  • What were the changes made before the show?
  • What player you use to play?

  You can check this link:

  How to troubleshoot sound problems in Windows XP

  http://support.Microsoft.com/kb/307918/en-GB

• Error occurred during the installation of the device, a service in the INF installation section is not valid with Sansa Fuze player

  Media player 11 fails to connect to my sansa fuze player. A second computer find the fuse in sansa without problem. Default media player 11 , I get the following message: error occurred during the instalation of the device, an installtion of service section in the INF is invalid.  I have two players from sansa and both not on this media 11 computer system, but both work on a second computer with media player 9 ? Is the problem, a bad installation of the media 11 on the first computer system, should remove and reinstall media 11 If I delete what is happening in the music on this computer file. Carl L_942

  Hi, Carl L_942,.

  Connect the Sansa Fuze and put into MSC mode. This enabled the majority of users with this problem. Check if it helps you too.

  For more information, see:

  Activation or forcing MSC mode on the Sansa player

  Additional reference on:

  Check and change the device to the master or the MTP USB mode

  The only problem with Media Player 11 and Sansa device is the synchronization of album art to the device.

  For more information, see:

  File Readme for Windows Media Player 11 for Windows XP

  Kind regards

  Divya R - Microsoft technical support.

• Sansa Fuze is not compatible with Rhapsody/Windows 8.1?

  Finally, I replaced my old laptop XP with a new with WIn 8.1.  My two (2nd gen.)  Rocket (no +) devices load OK, appear in Rhapsody as being authorized and allow the transfer of securities with subscription. But once disconnected the two devices think the tracks of the expired subscription.  Rhapsody has this message under Tools > device compatibility report:

  Device for Sansa Fuze 8 GB compatibility report:
  This PC reports that it performs "Microsoft Windows Version 6.2'."
  Transfers of securities of subscription to the devices is not supported by your version of Windows

  Titles that have been imported from CDs play fine. Someone here can shed light on what is happening?  Is is time to reformat devices?  Much thanks is advanced.

  Well, well, well. For all those who might find this thread with a similar problem in the future, I think that I just solved it my problem with the help of the Rhapsody site troubleshooting tips.  It is reset course the Sansa device clock, regardless of it's:

  Asked synchronize the device

  -Reset the clock secure your device
  1. go to the Rhapsody software
  2. connect your MP3 player to your computer
  3. hold the CTRL & SHIFT key on your keyboard and right click the player icon
  4. click on Reset secure clock

• Music from Sansa Fuze for PC recovery

  I loaded about 500 titles to my Sansa Fuze about 1 year ago. Meanwhile, I had a pretty big problem with my PC and had to replace the operating system. This resulted in my losing all the recorded tracks in Windows Media Player and my PC to normal files. All I want to do is to copy the music tracks back to my rocket to the PC but who are unable to do.  I am running Windows 8.1.

  When I look on the "rocket" via the PC I can see Playlists but not the tracks in their breast. The files are in the format of PLA and the pc seems unable to read.

  Can anyone help please

  Jaki

  You should be able to copy the files from playlist .pla on your computer of the player as well. Note that they do not work because the path is not correct, but they will be there for back-up if you need to transfer them to the player again.

• Sansa Fuze don't will not load! HELP!!!!!!!!!!!!!!!!!!!!!!!

  I have had my sansa fuze since last Christmas.

  The first time my sansa fuze wouldn't load I came here and someone told me to hang it to the USB port back because he has more power.

  So I got this new computer recently and my computer will not recognize it. I tried to uninstall it in my computer, but nothing works for me.

  Any ideas on how to solve this problem

  Thanks for the help

  First try all ports - and no hubs USB, just connection is direct to the computer.

  If there is still no love, go to Settings/Control Panel on the "rocket" and change the USB MSC Mode and see if it charges.

  Look in the computer and see which version of Windows Media Player, it is a. (open WMP, click on help and about.)  It must be 10 or 11 to recognize the "rocket" in MTP mode, which is probably what you value. Update Windows Media Player 10 or 11, and you can move on to PSG.

• Sansa Fuze v1: Rockbox vs original Firmware

  ROckbok have the stable version for sansa fuze v1. But I wonder what is the best? ROckbok firmware or the Original sandisk firmware... Any idea? Thans a lot...
  SRY for my bad English!

  Hello

  I can't tell you which is better for performance, but if you install rockbox on Sansa Fuze you will lose the warranty on the product and SanDisk will provide you with no warranty or replacement if it brakes or problems arise.

• Sansa fuze + ignores mp3 tags

  Hi guys I just got my sansa fuze + (8 GB) and apply the 01.27.02 firmware update. Later, I download a file from my collection, but the sansa doesn't recognize all the tags of tracks. I don't know if it's a name of file or any other problem. For example, I have in my coldplay album

  drwxrwxrwx 2 tuxtor 4096 tuxtor 2010-09-27 00:41 (2002) A Rush of Blood To The Head
  drwxrwxrwx 2 tuxtor 4096 tuxtor 2010-09-27 00:49 castles
  drwxrwxrwx 2 tuxtor 4096 tuxtor 2010-01-06 01:30 Parachutes [2000]
  drwxrwxrwx 2 tuxtor 4096 tuxtor 2010-09-27 00:41 Viva La Vida or death and all his friends

  I'm sure that all the files have the good tags (I can see it in amarok, banshee, etc.), but in the sansa I can watch Parachutes and Viva vida La or dead... the other albums appear with the album unknown and artist unknown.

  tuxtor wrote:

  I'm sure that all the files have the good tags (I can see it in amarok, banshee, etc.), but in the sansa I can watch Parachutes and Viva vida La or dead... the other albums appear with the album unknown and artist unknown.

  I'd be willing to bet that they don't.

  ID3v2.3 ISO-8859-1 is the format of the desired ID3 tags. If you use Linux, I suppose that whatever program you are using is not written this tag format. There was more here before with the same scenario.

• Album art Itunes using the Sansa Fuze.

  I add album art to several of my albums on Itunes. I then put the songs in a folder on my desktop (the music opens in Winamp) and then put them on my Sansa Fuze. However, the album art is not displayed. How can I solve this problem? Thank you!

  neutron_bob wrote:

  Hands down. the best tool to check the metadata and album art is MP3Tag.  If the embedded art is not of joy, you have MP3Tag export a file as album art.jpg or folder.jpg, another name of file will work with the Sansa.

  Mp3Tag is a free download, but you can make a donation to the author.  Should be supported, as well as the tool works!

  This is for you.

  Bob

  I finally gave it a try just now, so I could properly integrate album art, and the program really is up to the hype.

• HOW TO DOWNLOAD VIDEOS ON SANSA FUZE - SANSA MEDIA CONVERTER

  I DID IT! YAY! I AM ABLE TO CONVERT VIDEOS USING SANSA MEDIA CONVERTER! OK THIS IS WHAT I DID. I CALLED SANSA WHICH IS 1 800 SANSA. THEN I FOLLOWED ALL THE STEPS, THEY TOLD ME TO DOWNLOAD AND DO. IT IS WHAT YOU NEED TO DOWNLOAD IN ORDER TO CONVERT VIDEOS USING SANSA MEDIA CONVERTER AND DOWNLOAD THEM INTO YOUR SANSA FUZE

  -QUICKTIME 7

  K - LITE CODEC PACK

  -DRIVERX9

  -WINDOWS MEDIA PLAYER 10 OR 11

  -SANSA MEDIA CONVERTER

  IF YOU GET THIS DOWNLOADED, YOUR SMC WORK SURELY; D

  IF THAT DOESN'T HELP, CALL 1-800 SANSA AND ASK FOR HELP! :]

  I WAS NOT SATISFIED WITH SANSA PRODUCTS SO FAR! NOW I CAN DOWNLOAD MUSIC, PICTURES AND VIDEO ON MY SANSA FUZE! IT'S WORTH THE MONEY! (=

  DON'T FORGET * YOU NEED ALL THESE DOWNLOADED K!

  Well I did what Angel and * DANG all my problems with the video conversions have disappeared.

  I think that my codecs are not up-to-date.

• Impossible to copy files to the Sansa Fuze using Windows 7 (drag and drop, or Windows Media Player)

  Hello

  Yesterday, I bought the Sansa Fuze and I have problems copying files to the device using either Windows Media Player (Sync) or Drag and Drop (Explorer).

  The symptoms are:

  (1) the device is recognized and available in Windows 7 (Series USB MSC - sorry don't have it with me right now)

  (2) took me to upgrade to the latest firmware, which has worked flawlessly

  (3) when I try to drag and drop a file on the device (I use Windows 7, 64-bit), it starts, but doesn't seem to calculate the size of the files or waiting time to download correctly.  It is followed by a slow progressive, until the computer crashes, resulting in a constant 100% of the CPU.  The only solution is a hard reboot

  (4) when you use Windows WM, the device is recognized, okay and the synchronization starts, but it then stops without reason.  Once again, the processor springs and requires a reboot

  (5) using the results 3 and 4 in 1-5 files being copied across, but not more.

  (6) I tried several albums and one album at a time, but cannot determine if that makes a difference.

  Help, please!

  See you soon,.

  Richard

  It may be a bug in Windows 7. But one thing to try is to go to the Device Manager (assuming that Windows 7 still has), uninstall the "rocket" (under USB controllers), and then run add hardware to find and reinstall the driver.

  Use the MTP with Windows Media Player mode, MSC mode without.