Z2 turns on the volume in silent mode?

Similar Questions

• Can I use my Apple Watch to turn down the volume on my iPhone?

  Hello. I am looking to buy a Apple Watch for my wife for her birthday. She wants it only if it is supported by a very specific scenario. She wants to be able to turn down the volume on his iPhone * of * his Apple Watch. Is this supported?

  To be very clear, the scenario is the use of the watch to change the volume on the phone.  I know how to change the volume of the phone from the phone. I know how to change the volume of the watch from the phone. I know how to change the volume of the watch on the watch.

  But what I can't find info on after looking through the help/product guides, it's that it can control the volume of your iPhone remotely, using the Apple Watch.

  Any help much appreciated!

  Hello

  No, this is not possible.

• Sound seems to be decreasing after that I have used headphones, or turned down the volume.

  I have a HP G62 and he had a GOOD volume, but after that I have to use headphones or turn down the volume, he seems to do something for the volume and when I want to play sound after headphones are disabled you can hardly hear it.
  I turned the volume up on top of everything I can find, but it is so weak, it is not worth listening to!

  Hello

  1. What is the operating system installed on the computer?

  2. were there any changes (hardware or software) to the computer before the show?

  Perform the steps in the article, and check whether the problem is resolved or not.

  No sound in Windows (Windows 7)

  Note: this also applies to Windows Vista and Windows XP

  Hope that helps.

• Turn down the volume on the tone and ringing for HP Laserjet Pro M1536dnf

  We recently bought a Laserjet Pro M1536dnf.  I went through all the menus as well as the user's guide.  How do you turn down the volume for outbound faxes?  The tone and the call for ringtone is too loud and disturbing for the workers in the room where the fax.

  Hey Candlmc,

  If you press the key on the front panel of the M1536dnf, then you will be presented with the configuration menu.  Highlight the menu of system configuration and select it.  Scroll down the menu for the Volume settings and select it.

  This is the section that will allow you to change the ring volume and the volume of the phone line.

  Hope this helps,

  Jason

• Acer liquid E2 can vibrate off the coast in silent mode

  Hi guys,.

  I have problems with my acer E2 liquid. I can not turn the haptic feedback off when I'm in silent mode.

  In settings > sounds > vibrate is turned off

  also in settings > language and input > android keyboard > vibrate on keypress is off.

  When I'm in silent mode, the bottom 3 buttons (back, home, menu) keep giving haptic and unlocking the screen. When I'm not in silent mode, all the vibrations are disabled.

  It's very awkward meetings, because vibrations are some noise.

  I hope you can help me with this problem.

  Kind regards

  Karen

  Hi Karen,.

  I had the same problem. It doesn't seem to be an option in the settings of the phone, but if you download profile Scheduler App, you can turn haptic phone in all of audio profiles. I hope this helps.

  Kind regards

  Andy

• First AID (10.11): "impossible to turn up the volume for the repair, the operation failed."

  Hello everyone

  I think I'm in trouble here...

  After I did a clean install of 10.11 two weeks ago, my Mac Pro 3.1 (2008) began to take a long time to boot up to the desktop. The actual load of the operating system (with the progress bar) is fast, but it takes a while (minutes) to enter my password until the computer is accessible at the level of the office. I have almost nothing the autostart value in Sys Prefs users.

  The startup disk is two SSDs over a Sonnet Tempo Pro and the folder of the user is on a separate HARD disk.

  Because the slow pace is the point where to enter the password, I thought that there could be a problem with the folder of the user HARD drive. I had my user folder on a HDD separated for the last several iterations OS X without problem, but in the fall, I needed more space and bought two new 3 TB drives (one for the clone SuperDuper). They ran very well in the Mavericks.

  When I run THE first AID on the volume that contains the folder of the user, I get the following error (it does not appear if I run first aid on the HARD drive itself):

  "First aid process has failed. Save if possible data on this volume. "The details section of the dialog box reads:

  "Update support partition for the volume to the need

  Impossible to disassemble for repair volume

  Operation failed... »

  Worrying, I get the same error if I run first aid on the volume of the other 3 TB drive that holds the user folder SuperDuper clone.

  I suppose that the two new 3 TB drives may be failing at the same time, but it seems a bit unlikely. Does anyone have an idea of what other causes, there could be for these errors?

  I would be very grateful for any help, as this is my main machine. Thank you in advance,

  EDIT: I realize I should have posted this in the OS X El Cap - my apologies for this forum. Also, I find this recent thread that seems to suggest that there is a bug in Dug, I get the same errors when I run first aid on my other two internal drives.

  Philippe

  BTW, I tried to start in safe mode, but that has not changed anything. Also, I created a test (with the record on the striped SSD) account. Representing loads very fast after that I entered the password.

  Thanks in advance again

  Philippe

• Everyone knows the watch switch silent mode to its own?

  I noticed that my Apple Watch going in silent mode on its own. Anyone experience this problem? I want a software update with a small icon on the top when the watch is in silent Mode. Any thoughts?

  Yes, mine did so a couple of times. Did not with 2.1 so far.

  For suggestions, go here: http://www.apple.com/feedback/watch.html

• BlackBerry Smartphones turn off the light in night mode

  Hello

  Night light of my BB 9700 (OS 6) turns off when it is in mode.

  How can you do with the BB Curve 9380 (OS 7.1)?

  Thank you for your attention.

  Kind regards

  Hello and welcome to the community!

  In fact, the judgment was, I recall, a bug. It was supposed to work in the screen remained mode bedside... otherwise, it is not useful as a bedside clock. Therefore, I would say that your 9700 has a level of operating system with the bug, and your 9380 is WAD - works as expected.

  Good luck!

• Turn off the volume on the keyboard shortcuts?

  So, I spilled some beer on my keyboard a few days ago. I've erased upward as far as possible, close the battery down/removed, it dried out as much as possible, etc. After a few days, everything seems to work fine... except the shortcut for lower volume (Fn + arrow left on my Lenovo) seems to be permanently.

  In fact, since everything is functional but aside from that, I hope to disable this shortcut. Is there a way to change the settings so that I can only adjust the volume control on the taskbar Panel?

  Hello

  As the problem you are experiencing is related to the material, it would be best to contact the computer manufacturer for assistance.

  Lenovo support: http://support.lenovo.com/en_US/

• Some Java applets do not work after the installation in silent mode, resolved in tilting head "enable Java content in the browser" - why?

  We have about 1 800 workstations with Windows 7 (32-bit and 64-bit) running different versions of JRE Java 6 update via update 7 51 32.  Most are on 6 45 update.  We would like to standardize on update of Java 7 51 (32-bit) and get everyone updated to this version for security reasons.

  For the last two weeks, we had trouble with our driver prior to installation.  What we are seeing, it of that our procedure successfully closed all open Internet Explorer Windows and processes related to Java, uninstall all older versions of JRE Java and says then successfully installed of the update of Java 7 51.  The Java Control Panel works.  We can even take Internet Explorer to check the Java Version or Java Tester - what Version of Java are you running? and confirm that the Java applets on these sites load (although the latter only works after adding the site to the list of site exceptions); However, when the testers try to access our system Kronos Workforce Central 6.3.10, used by this system Java applets do not load.

  We tried the following things, which none worked:

  • Empty the Internet Explorer browser cache and cookies.
  • Clear the local Java cache.
  • Restart the computer.
  • Reset Internet Explorer settings, including personal settings.

  Go to the Panel control Java, ranging in the Security tab, uncheck "enable Java in the browser content", the only thing that works based on apply, press OK in the pop-up window, checking the box "Enable Java in the browser content", press OK, press OK in the pop-up window and then restart Internet Explorer.  It is only after this point, all Java applets, including those used by Kronos Workforce Central 6.3.10, work.

  What I need to know, is how I can automate the reset procedure from the box "Activate Java content in the browser" after installation, or I'm something wrong or missing a step in automatic installation that is originally for this?

  We use Microsoft SCCM 2007 R3 to perform this upgrade, and everything is run on the client computer by using the SYSTEM account.  First of all, the "javaclean.ps1" PowerShell script is run, with part of the process of command line change of the strategy of running script PowerShell for Bypass.  This script handles the closure of Java-dependent applications and Java deals and uninstall older versions of Java.

  javaclean.ps1:

  #Find all Java products, excluding the automatic update that actually is uninstalled when the main installation is removed.

  write-host "If you are looking for all versions of Java installed" - ForegroundColor yellow

  [table] $javas = Get-WmiObject-query "select * from win32_Product where (name as" Java % ' or name like '% of Java (TM)' or "J2SE %") and <>the name «Java Auto Updater»»

  If ($javas.count - gt 0)

  {

  write-host "Java is already installed" - ForegroundColor yellow

  #Get all Java processes and kill them. If java is running and processes are not killed then this script will call a restart suddenly.

  [table] $processes = Get-Process-name "Java * ' #-erroraction silentlycontinue

  $processes += get-Process - name "iexplore" #-erroraction silentlycontinue

  $processes += get-Process - name "firefox" #-erroraction silentlycontinue

  $processes += get-Process - name 'chrome' #-erroraction silentlycontinue

  $processes += get-Process - name "jqs" #-erroraction silentlycontinue

  $processes += get-Process - Name "jusched" #-erroraction silentlycontinue

  $processes += get-Process - Name 'jp2launcher' #-erroraction silentlycontinue

  If ($processes. Count - gt 0)

  {

  foreach ($myprocess to $processes)

  {

  $myprocess.kill)

  }

  }

  #Loop through the Java products installed.

  {foreach ($java to $javas)

  write-host "Uninstall" $java.name - ForegroundColor yellow.

  $java. Uninstall()

  }

  }

  Once this script is complete, SCCM calls a script VBS "install.vbs" to perform the installation of Java JRE 7 day 51.

  install.vbs

  '* ********************************

  '*

  ' * Script: install JRE 7 routine

  '*

  ' * Date: 14/03/14

  ' * Author: [REDACTED]

  ' * Rev: 1.0

  ' * Notes:

  '*

  '* ********************************

  '--------------------------------

  ' / / / Common

  '--------------------------------

  Set objFSO = CreateObject ("Scripting.FileSystemObject")

  Set objWshShell = CreateObject ("WScript.Shell")

  «Get the system architecture»

  Protected colSys: Set colSys = GetObject("WinMGMTS://"). ExecQuery ("SELECT AddressWidth FROM Win32_Processor", 48)

  Dim objSys

  For each objSys in colSys

  If objSys.AddressWidth = 64 then bolIs64Bit = True

  Next

  'Get the operating system

  Dim colOS: Set colOS = GetObject("WinMGMTS://"). ExecQuery ("" Select * from Win32_OperatingSystem ", 48")

  Dim objOS

  For each COS in colOS

  If left (objOS.caption, 20) = 'Microsoft Windows 8' then

  bolIsWin8 = True

  WScript.Echo "win8.

  End If

  If left (objOS.caption, 22) = "Microsoft Windows 8.1" Then

  bolIsWin81 = True

  WScript.Echo "win81."

  End If

  Next

  ' Set 32-bit directory program files

  If bolIs64Bit = True Then

  strPFILES = "Program Files (x 86)".

  strSYSDIR = "SysWOW64".

  Else strPFILES = "Program Files."

  strSYSDIR = "System32".

  End If

  ' Set repertoire_windows

  strWIN = objWshShell.ExpandEnvironmentStrings("%windir%") "

  'Set the current directory ".

  strCurrentDir = objFSO.GetParentFolderName (Wscript.ScriptFullName)

  ' Set computer name

  strCompName = objWshShell.ExpandEnvironmentStrings("%computername%") "

  '--------------------------------

  ' / / / Main script

  '--------------------------------

  '--------------------------------

  ' / / / Installation using .msi & capture exit code

  '--------------------------------

  ' intExitCode = objWshShell.Run ("msiexec.exe i" "" & strCurrentDir & "\package.msi" "" & "TRANSFORMS =" "" & strCurrentDir & _)

  ""\transform.mst"" "ALLUSERS = 1 Reboot = ReallySuppress/SB»(, 8, True)"

  ' wscript.quit (intExitCode)

  ' * COMMANDS RUN HERE *.

  "Create the folder structure if it does not already exist

  strFullPath = 'c:\Windows\Sun\Java\Deployment' "

  "How many levels are there in the path?

  nLevel = 0

  strParentPath = strFullPath

  Do until strParentPath = «»

  strParentPath = objFSO.GetParentFolderName (strParentPath)

  nLevel = nLevel + 1

  Loop

  ILevel = 1 to nLevel

  "Path of directory to the iLevel level to understand

  strParentPath = strFullPath

  For j = 1 To nLevel - iLevel

  strParentPath = objFSO.GetParentFolderName (strParentPath)

  Next

  ' Is it exist directory? If not, create it.

  If objFSO.FolderExists (strParentPath) = False Then

  Set newFolder = objFSO.CreateFolder (strParentPath)

  End If

  Next

  "Kill process

  objWshShell.Run "taskkill /F /IM iexplore.exe", 8, True

  objWshShell.Run "taskkill /F /IM firefox.exe", 8, True

  objWshShell.Run "taskkill /F /IM chrome.exe", 8, True

  objWshShell.Run "taskkill /F /IM javaw.exe", 8, True

  objWshShell.Run "taskkill /F /IM java.exe", 8, True

  objWshShell.Run "taskkill /F /IM jqs.exe", 8, True

  objWshShell.Run "taskkill /F /IM jusched.exe", 8, True

  "Copy deployment files

  objFSO.CopyFile strCurrentDir & "\deployment.config", "c:\Windows\Sun\Java\Deployment\", True

  objFSO.CopyFile strCurrentDir & "\deployment.properties", "c:\Windows\Sun\Java\Deployment\", True

  "Disable UAC".

  ' If bolIsWin8 or bolIsWin81 = True Then

  "objWshShell.Run"reg.exe ADD HKLM/v PromptOnSecureDesktop t REG_DWORD 0 f d", 8, True"

  "objWshShell.Run"reg.exe ADD HKLM v EnableLUA /t REG_DWORD /d 0 f", 8, True"

  "objWshShell.Run"reg.exe ADD HKLM/v ConsentPromptBehaviorAdmin t REG_DWORD 0 f d", 8, True"

  "End If

  "Install application".

  intExitCode = objWshShell.Run ("msiexec.exe i" "" & strCurrentDir & "\jre1.7.0_51.msi" "IEXPLORER = 1 AUTOUPDATECHECK = 0 = 0 JU JAVAUPDATE = 0 WEB_JAVA = 1 ALLUSERS = 1 Reboot = ReallySuppress/qn", 8, True ")

  "Enable UAC".

  ' If bolIsWin8 or bolIsWin81 = True Then

  "objWshShell.Run"reg.exe ADD HKLM/v PromptOnSecureDesktop /t REG_DWORD /d 1 f", 8, True"

  "objWshShell.Run"reg.exe ADD HKLM EnableLUA /t REG_DWORD /d 1 f v", 8, True"

  "objWshShell.Run"reg.exe ADD HKLM v ConsentPromptBehaviorAdmin /t REG_DWORD /d 5 f", 8, True"

  "End If

  WScript.Quit (intExitCode)

  '--------------------------------

  ' / / / Installation via .exe on network

  '--------------------------------

  "objWshShell.Run" "" "& strCurrentDir &"\Setup.exe"" s - sms - f1 "" "& strCurrentDir & _"

  "" "\setup.iss" "-f2" "" & strWIN & "\Temp\Install-app.txt" "", 8, True

  "Need to turn off the security warning opening the file first.

  Set objEnv = objWshShell.Environment ("PROCESS")

  objEnv ("SEE_MASK_NOZONECHECKS") = 1

  ' intExitCode = objWshShell.Run ("" "& strCurrentDir &"\jre-7u45-windows-i586.exe"" /s /v "" / norestart "& _)

  ("" "TRANSFORMS =" "" & strCurrentDir & "\Tribe-jre7.mst" "", 8, True)

  ' WScript.Quit (intExitCode)

  ' * COMMANDS RUN HERE *.

  "Then turn it back on.

  objEnv.Remove ("SEE_MASK_NOZONECHECKS")

  '--------------------------------

  ' / / / Features

  '--------------------------------

  Help on this issue would be much appreciated!

  It turns out that it is actually a problem with Kronos Workforce Central.  We had the parameter 'site.java.plugin.CLSID.familyVersion' as an application set to "clsid:CAFEEFAC-0016-0000-FFFF-ABCDEFFEDCBA", which is the CLSID Java Java 6.  After update this value to "clsid:8AD9C840 - 044F-11 D 1-B3E9-00805F499D93" (the universal CLSID of Java), this problem does not occur when the automatic upgrade of Java.

  We also have good Java 6 and 7 in our environment and did during our implementation of Kronos, so I don't know why we used the Java 6 CLSID in the first place.

  Detective Conan!

• Smartphones Blackberry blackBerry rings when the vibrate or silent mode

  How to fix my blackberry 8530 to stop the ring when calls come, when it is set to vibrate only, or in silence.  Quite embarrassing to the office, or church, etc.  I never had this problem with any other phone - vibrate means vibrate right?

  If you use the small speaker icon which should be in the upper left corner of your screen (in the meantime no themes moved its location) you can open a menu that has the ability to 'change profile '.  Select this option and select "Vibrate only" in the list. From there, scroll down to 'Phone' and select and you can customize your settings from there.

  Your problem seems to be that "Volume" setting in this menu is not set to silent.

• Can I turn off the volume display on a G62?

  My laptop shows some really ugly is the on-screen indicator of volume and I would really appreciate if I could remove it somehow so that I could replace it with a prettier. I hope someone can help me with this

  Hehe, this is exactly the program I wanted to replace by, but in fact, it seems now that it could have helped me, I completely forgot that it is necessary to completely remove programs restart sometimes right now I see that 3RVX indicator, so it seems that it has been disabled now thanks for your help

• Turn off the power of airplane Mode?

  Hi, I have a T440p and it seems that the package dependencies of parameters Auto-setting Lenovo updated sometime in the last few days. Since then, whenever I pass in airplane mode to disable Wifi, energy mode gets automatically changed. Is it possible to disable this? The release notes say "added the registry settings to disable the functions of automatic detection of the power plane Mode." If someone knows where is this registry setting?

  Thank you.

  http://forums.Lenovo.com/T5/W-series-ThinkPad-Laptops/W540-charging-bug-WiFi-off-no-charge/m-p/14982...

• Help me!!! Air-sap702i can he turn off the LED standalone ap mode? What is the command?

  I need help with the problem.

  The customer needs to put out of the LED. because it is installed in the hotel room.

  Interference LED blinks the eyes to sleep.

  I need to know the command line to disable autonomous LED of AP mode in the version of the firmware. 15.x.x

  Is it possible?

  help me T - T

  Thank you

  Phong

  Do not have this AP, but have you tried this:

  config t

  LED display off

  Scott

• Delete PassthroughDevice does not remove the devices in silent mode

  Hello

  Is there a way to remove from VM SCSI devices with the Remove-PassthroughDevice cmdlet without confirmation?

  Currently, I have tried with the following syntax:

  Get-PassthroughDevice - VM $vm | Delete-PassthroughDevice

  Which prompts for removal, but I want to remove them silently.

  BR,

  JJ

  Add the - confirm the setting.

  Like this

  Get-PassthroughDevice -VM $vm | Remove-PassthroughDevice -Confirm:$false