Volumes na Storage - Machine virtual

Similar Questions

• vCloud Director for 5.6.3 - level storage disk virtual machine profiles service provider

  Hello

  A new feature has been ad with vCloud Director for provider 5.6.3

  Profiles of storage disk virtual machine level:

  Unlock loads such as databases and e-mail servers that require different levels of a single VM disks to balance the cost of storage with performance.

  Can someone show me how I can do?  When I try to add a second disk to a virtual machine I can not change the storage for that specific disc profile!

  Thank you

  It is a unique feature of the API.

  I think that this should be the right section of the API schema: http://pubs.vmware.com/vcd-56/topic/com.vmware.vcloud.api.reference.doc_56/doc/types/DiskType.html

• Best practices - addition RDM to the second node (W2K3) MCSC Machine virtual nodes on the physical host computers

  Addition of RDM to the second node (W2K3) MCSC Machine virtual nodes on the physical host computers

  Unable to find another thread on this

  When you add RAW disks to the second node in Virtual Machines across physical hosts in the Cluster / Cluster across boxes,.

  VMware said shared point of the storage drives in the same location as the first node sharing storage disc *.

  -Select use an existing virtual drive...

  -In the drive path, navigate to the location of the disk (quorum) specified for the first node

  -Select the same virtual device node you chose for the first virtual machine shared storage disks, IE SCSI (1:0)...

  In other words to add the RDM to mscs-node2, navigate to/vmfs/volumes/lun1/mscs-node1 / mscs - node1_2.vmdk (mscs-node1_2 - rdmp.vmdk)

  For years we have directly added the ROW the second node specifying RDM disk not existing does not, in general we do directly from the host, not the vCenter, it seems to work fine.

  For what is the safest way, the official method can cause all sorts of problems if you need to cancel the registration of the ROW on the first node (here's where I found no official documentation).

  Delete you or keep the file descriptor? We tried to keep him, but ended up with several mappings to la.vmdk/rdmp.vmdk, so now, this system has disk2_.vmdk / disk2_ - rdmp.vmdk and disk4_.vmdk / disk4_ - rdmp.vmdk pointing to the same RAW.

  What really bothers me is safety, these are very important boxes, I prefer to continue to have the VMDK and rdmp.vmdk in separate data warehouses, and do not have this dependence on the head node

  Your comments please, we are viewing the store only setup of MSCS clusters with lanes separated from RDM and are there risks associated with this?

  * Ref: "Setup for Microsoft Cluster Service - 4.1 and Failover Clustering".

  I realize there was an error in my logic

  When you work with the main node, if there is a requirement to unmap drives ROUGH (move to another cluster vmware, cloning the system etc.)

  Take note of the location of all the rdmp.vmdks

  Remove each rdm disk without deleting

  To add

  Add "Use an existing virtual disk to disk" (yes I know its bad, but once you create the host calling now think its virtual)

  Navigate to the mapping of existing raw device, appearing like a vmdk * and add using the former location of scsi

  Graphic interface hides the descriptor

  A virtual disk has a vmdk and a flat.vmdk

  A CRUDE disk has a vmdk and a rdmp.vmdk (the dish is replaced by vocation)

  A suggestion of one of my companions is to locate the al the ROW in a single data store small, visibility of virtual machines with raw disk went like this

• Storage Vmotion Virtual Center Server

  Is it possible to storage vmotion virtual Center

  4.0.0 Server? or are their any gotcha?

  I need to do, but I play it a little prudent

  Thank you

  The formatting of your post is a little messed up, but if the question is, can you sVMotion your vCenter VM, then the answer is Yes.  Still, it is after all just a virtual machine.

• Machines virtual pretty bad performance but...

  Hi guys some info fisrt

  • 6 3.5u4 ESX - 1 Cluster - 1 resource pool all default values

  • 32 GB of RAM each ESX = total of 192 GB

  • 8 x 2.9 GHz CPU - Intel Xeon X 5770 eachESX.

  • See 3.1.1

  • 270 virtual machines virtual Windows XP SP3 - 1 vCPU - 512 MB RAM - power on throughout the day for the maintenance of workstations for customers light Wyse. Software used: Internet Explorer - third 2 apps - Word/Excel viewers

  • IBM DS4700 7 L EACH storage about 150 GB of available for each LUN - connected using Fibre Channel.

  This question is for 2 weeks now,

  07:00 - some people start work - they take calls and Clients use light Wyse - 30 people - so far everything goes well

  08:00 - daily to the Thin Client - 30 people - So far so good

  09:30 - nothing changes as people connected but start VM applications run slow victory, by clicking menu takes much displayed, Internet Explorer is very slow to is to open, if they try to enter the third-party application that they cannot see the application update - basically, they cannot continue worlkin.

  Interesting point here is and it has nothing to do with Vmware View is when you restart a virtual computer that is problem of you it takes about 10-15 minutes to be up and running again I want to redisplay the prompt for the user/pass. not all machines are restarted, juice 3 or 4 because they are completely unnecessary.

  11:00 - the virtual machines that have not restarted back works well and during the day stay VMs works very well although it has even more users since at 13:00 more than balls people to systems. Yes, it's a call center

  Any pointer what newspapers should check? or where to start Troubleshootin

  I don't really see any high use of the processor or memory.

  Is this OK this all power 270 VMs on even if only a maximum of 120 can be actually used.

  Any idea what could be the problem?

  and the most important fact here every day is he at the same time abot 09:28 - 09:32?  :| weekend even when the number of people is like 20

  CPU - memory usage

  Thank you very much

  I noticed you use Symantec.  Here's what I had to do to fix this problem in my ESX environment:

  -Plan the AV definition updates arrive after hours on the server.

  -Disable the 'quick scan' what happens when a client downloads the new updates of AV: http://service1.symantec.com/SUPPORT/ent-security.nsf/docid/2006032313184248?Open&src=tranus_con_sl&docid=2005052514152448&nsf=ent-security.nsf&view=docid

  -Reduce the number of concurrent clients updates the AV server performs, as well as the speed at which the AV server sending each update of butterfly.  I think I put mine 2-wire and a 750 ms delay: http://service1.symantec.com/support/ent-security.nsf/854fa02b4f5013678825731a007d06af/2e726ee5a5d07e538825740c006700cb?OpenDocument

  -If you have any regular customer AV scans, stagger their schedules so that you don't have multiple customers on the same LUN scanning themselves at the same time.

• "the machine virtual source is not recognized" using VMWare Converter stand-alone 4.01

  All,

  Shadow protect IT edition allows us to create backups of image files from our servers. We need the ability to convert files Shadow protect (SPF) in VMWare Server 2.x. files about half of our servers do not convert. We get a message that says: "the machine virtual source is not recognized. What gives? I know image backups are fine because I tested.

  Any help would be appreciated.

  Thank you.

  vmnoob

  We support only a few specific versions of ShadowProtect.

  > StorageCraft ShadowProtect 2.0, 2.5, 3.0, 3.1 and 3.2

  There may be additional restrictions when you attempt to use these types of files, such as the following from the Manual:

  1. dynamic disks are not supported.

  2. all the images in the backup of a machine must be in a single folder, without other images placed there.

  3. for incremental images, so 16 incremental backups are supported.

  4. images of systems with logical drives are not supported if the logical drive is also a system or an active volume

  5. for volume-based cloning, all volumes on the disk until the active devices and the system must be saved.

  5.1 for example, if a drive has four partitions, 1 to 4, with the partition as the active volume 2 and partition 3 as long as the system volume, the backup must include 1 to 3 partitions. (ShadowProtect only).

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• How to move the VM to another storage without Virtual Center

  Hello-

  I read some other posts on the moving a virtual computer to another storage without Virtual Center and there is a good post, but I have different problems, because my situation is a little different.

  My VC is currently stored on a local storage of the ESX servers.  It is the virtual machine that I want to move to a shared storage.

  You guys can help me with some of the steps I can take to move this shared storage better?

  I'm not too familiar with Linux, so even copy files etc, I'm not sure how to do it.

  TIA!

  Luke

  You are welcome!

  Now you can help us.  Please consider awarding points for 'useful' or 'right' answers

• any time, I try to open adobe photo shop elements 2.0 it says could not start because the volume windows uses for virtual memory did not enough of free space see windows help for more information

  When I try to open adobe photo shop elements 2.0 message that says: cannot start adobe because volume windows uses for virtual memory doesn't have enough free space, which could lead to stability problems see windows help for information can help you

  Hi gregoryandme,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Uninstall and reinstall the Adobe photo shop program.

  Method 2: Perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

• EqualLogic - Volumes moving storage pools

  Hello

  I want to move a volume across storage pools this weekend but begins to wonder about something.

  I have 3 pools of storage all in the same group.

  Level 1 (2 ps3900xv)

  Level 2 (1 ps4000e and 1 ps4100e)

  Tier3 (1 ps6100xv)

  We go to the retirement of the 3900 2 because they are EOL. I have 4 books I want to move from level 1 to the Tier3. 3 volumes are my Exchange 2010 database and the 4th volume is my SQL databases.

  What I was wondering is can I move these volumes with database Exchange and SQL DB to live? From what I've been reading is claims of Dell you can. The part that worries me is I moved a volume of test and noticed that the iSCSI connections terminate (log out and back in) for a fraction of a second, and I don't want that affect databases.

  Thanks for the tips!

  Hello

  Yes, you can move the living.  Logout/login is necessary because you have moved the data to another Member.  This is handled through the iSCSI specification.  'S called it ASYNC logout and redirection of connection.   The table will display the initiator to disconnect a specific session.   When it goes back to the address of discovery, he is redirected to the new physical port.   All connections to an EQL array are handled this way.

  FYI: If there are many books on level 1, you can merge Tier1 and Tier3 in one step.  Then move a 3900 member to a temp pool, which will leave all the data on this member behind.  Then you can remove this member and repeat for the last 3900.    It's fewer steps in this way and you can start at night and let it run overnight.  The merge process is close to the trapezoids.  Because no page movement starts immediately.  Then merge, then select a member to an empty pool.  This will save time restriping data across the pool now three members.

  Either way works fine.

  Kind regards

• machine virtual Windows 8.1 under windows 7

  Hi, is it possible to rotate the machine virtual windows 8.1 on windows 7?

  Thank you

  Saad

  See the instructions:

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-install-the-latest-Windows-10-build-in/2350040e-2f4e-4470-a4b4-143160dc51eb

  Windows 10 references, but Oracle VirtualBox can be installed on Windows 7 and configured in the same way to run Windows 8.

• Machine virtual Windows 7 - freezes\reverts of the screen when going from Windowed to full screen and vice versa.

  I use a Win7 box with a Machine virtual Win7 on it.  When I started using the VM, it should start and login and work very well.  Shortly after I started having the following problem.  It loads in windowed mode, so I me the welcome greenish\blueish after cutting inside.  If I wait for the Office to load, when I do the full VM screen, it goes full screen then the screen goes to the Welcome screen again, but it's just a static image.  It won't change until I have send a Ctrl-Alt-Del command.  Can I get the normal window with options for logging, start the Task Manager, etc..  If I press ESC or click Cancel, it will show the office and I can work on it without problem.

  If I leave full screen mode windowed after that, the same thing happens, except instead of the Welcome screen, I get the screen of Ctl-Alt-Del as a static picture.  Once again, if I send the Ctrl-Alt-Del command, then cancel, I get the office as usual and it will work until I have try to resize the screen again.

  Can someone help me understand what is happening?

  Thanks in advance,

  Joe

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  Forum TechNet Windows 7

  Hope this information helps.

• Stretch machine virtual windows on two monitors

  Stretch the window machine virtual windows XP mode across two monitors.

  Windows 7, videocard, NVIDIA G Force 210, two ASUS 23 "monitors a VGA the other DVI

  I can stretch the other windows like adobe reader across two monitors, but the XP virtual machine window can be extended a bit bigger than a monitor. Virtual machine window can be passed a window to each other very well... just not expandable wide two monitors.

  It would be useful for a program of CAD drawing two pages visible at the same time.

  Thank you

  Hello

  The question you have posted is limited to Windows XP Mode and it would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itprovirt

• How to get the cpu host machine virtual mhz by PowerCLI

  How to get the cpu host machine virtual mhz by PowerCLI

  Thank you

  

  The following command of PowerCLI will list the maximum cpu MHz for all of your virtual machines from the host:

  Get - VM | Select-Object - property Name,@{Name='MaxHostCpuMhz'; Expression = {$_.} NumCpu * $_. VMHost.CpuTotalMhz / $_. VMHost.NumCpu}}

• Cannot install the machine virtual linux 2 TB in size in esxi 5.5

  Cannot install the machine virtual linux 2 TB in size in esxi 5.5

  VM will be restarting inbetween fixing and explains the operating system not found.

  Please help me on this

  Thank you

  Anand

  What Linux distro are you trying to install?

• Machines virtual FT can be backed up using backup as (VCB, vmware data recovery) technology, which uses the snapshot feature.

  Friends,

  Machines virtual FT cannot be saved using VCB, VDR, because he can't stand not instant. So how can we backup VMs FT?

  Hello

  Please read this article: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1016619

  It is contains guides for VMS backup FT.