Voodoo Envy 133 eSATA DVD not hotplugging

Similar Questions

• Satellite P30-133 CD/DVD not recognized in Win XP

  A few months ago that the CD/DVD drive disappeared from windows XP home SP2
  It is visible in the list of the BIOS boot, but I'm not sure if it turns elsewhere in the bios.

  The BIOS also seems to be ad slowly started upward. I have reset the BIOS to default settings and the player was available for long enough to reinstall windows. Resttting the deafault BIOS does not work every time. Everything is now on the machine is a new installation of windows and the drive is not visible. Light on the DVD/CD drive flashes on startup every time, but it will not read a bootable disc.

  The disc was found in another machine and works fine. What is a BIOS problem or a motherboard problem.
  I am reluctant to spend huge sums of money on this laptop, as he already had a new motherboard a couple of years.

  Any help or advice appreciated.
  This isn't a problem that will be solved by the registry hack 'filter '.

  Have you tried a BIOS update?

  You reinstall Windows using the recovery disk? Or have you installed Street copy of XP?

  Try to boot from a Bootable CD, if it does not, then the motherboard may be faulty, or the drive has intermittent problems.

• 17 - j137cl: HP Envy 17-j137cl plays not Blu Ray

  HP Envy 17-j137cl plays not Blu Ray disc

  Hello

  It doesn't have a drive to read drive BlueRay:

  http://support.HP.com/ID-en/document/c04467663

  There only: a "SuperMulti DVD burner".

  Kind regards.

• HP ENVY 4504: Micron WILL NOT GO BY PRINTER KODAK PREMIUM PHOTO PAPER 280 x240GM

  My HP ENVY 4504 printer will not feed Kodak premium photo paper 240 gms through

  Hello

  First if you please the way you load photo first papers. Have you tried HP papers with the same thickness? Please check your loading process using the following Manual:

  http://h10032.www1.HP.com/CTG/manual/c03784120.PDF

  Kind regards.

• HP Envy 13 d045tu: could not start the Envy 13 d045tu

  Hey,.

  I just got my new HP Envy 13 d045tu and not even 1 week, I can't start.

  When I press the power button, it turns on for about 5 seconds then dies again. Absolutely Nothing appeared on the screen, not even a flicker.

  I have tried those doing hard reset stuff like by pressing the power button for 20 seconds, the power button / stop + mute all these and nothing do not seem to work? What should I do? Its only a few days old!

  It turns out that it is a manufacturing defect. Application of a new replacement unit (5 days only), technician says probably motherboard problem. Thanks anyway!

• CD/DVD not detected or does not, OS-Vista (Home), SP1.

  Laptop HP Pavilion DV700, OS Vista Home Premium, SP1, CD/DVD not detected and does not. Please advice. Thank you.

  If the CD is not autostart, try to look at its contents in Windows Explorer. Also note that you posted the answers Sandbox Forum, which is for the test, not for technical questions.

  Stefan Blom, Word of Microsoft MVP

• Watch DVD not Player multimedia does Windows 7

  I can not watch DVD not Media Player.

  Hello

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

• ENVY 750-129cb: new computer - DVD not opening

  Hello

  Just bought a HP Envy 750-129cb awesome computer - and internal DVD/CD RW drive does not, when the button is pressed (after the opening of the case of money - outside)

  HP DVD/CD RW drive

  Module # DV - 8465H, February 2016

  Provided with the computer

  I opened the computer and checked all cables, etc., everything looks good, but the DVD will not open.

  Any ideas?

  Thank you very much.

  Hello

  Thank you very much for the help - I really appreciate it.

  So, I bought a new graphics card - graphics of 750 Genforce GTX ti, as my old HP Elite had an AMD Radeon 6700, while I was trying to get an equivalent to him for my new HP Envy, since AMD card was not compatible with the motherboard.

  The 'tech' guy, said it would make a difference of 25% - the graphics card GTX AGAIN, that what came with the HP Envy 730 GT map - and especially good for photos.

  But, please let me know your thoughts. Don't you think it's a value-wile put this card in? Maybe I'd better return the card and put it toward a new laptop, since both of my laptops died at.

  Thank you once again, all the details would be really nice

• HP envy 17 3d will not play a dvd

  I have a HP Envy 17 3D laptop and I played this movie specific about this before and it worked very well but now it won't play in Media Player using the and I am wonderign, if anyone knows of any solution.

  You must get rid of Daemon Tools. It is in conflict with HP Media Smart, use virtual Clone.

  Start by creating a manual Windows restore point before dong anything so you can at least get back to where you were.

  Then type "regedit" in the search with quotes box and navigate to the MSR file and note how you arrived there.

  HKEY_LOCAL_MACHINE > System > CurrentControlSet > Services > MSR.

  Thirdly, go to Device Manager and find storage controllers and develop and that there should be at least one that says Daemon Tools or Duplexsecure.

  Fourthly, uninstall Daemon Tools, I think that their site is a special tool to uninstall correctly. Restart after uninstalling DT

  Now go back and repeat the second step and make sure that the reader of the MSR is missing, if this isn't the case, you will need to start in safe mode and do a right click to remove.

  Return to step three and ensure that there is no controller storage with these names thereon. Uninstall them if they are present and restart. If there is no virtual drives in Device Manager, remove those and reboot.

  Now go to the computer and make sure that there is no current virtual disk, there should be that a single device with removable storage, and which corresponds to your BD - ROM drive and in almost all cases, he is appointed 'E', but what is important is that be the first player in the devices with removable storage.

  Try your movie again.

  We may have to reinstall MS DVD, but it can work without having too much. If you need to reinstall it again, let me know that there is a procedure for this.

  Post again and send a PM with the link to that thread if you still have problems.

  Commodo Firewall also causes conflicts with MS DVD as well as AVG Anti Virus software.

• HP ENVY 17-R102NL: dvd burner double layer HP ENVY 17-R102NL

  Hello

  I would like to know what kind of burner is installed in HP ENVY 17 - R102NL laptop computer?

  What is the burner model number?

  It is a DVD burner double layer RW-/ + or not? or another type?

  Thank you

  From the Manual:

  Fixed optical drive, Series SATA, DVD +/-RW Double layer SuperMulti Supports zero power optical drive Supports M-drive 9.5 mm tray loading

  Optical drive DVD +/-RW Double layer SuperMulti 813784-001

  So yes, it will read and burn supports double layer.

  

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP Envy: compatible blank DVDs

  What high blank DVDs that are re-writeable storage capacity are compatible with the hp DVD A DH16AFSH DVD RW in my PC HP Envy # 700-406 model, product # J4W42AA #ABA? I need to copy / back up between a few hundred to several hundred concerts of files and folders on a secondary backup in addition to my external hard drive.

  Hello

  Compatibility with the media is generally a function of optical drive firmware.  If you are going to copy several hundred GB of files, then it will take a looooooooog time and a lot of disks.  If you had to say 800 GB of files to a standard 4.7 GB optical support, then do the math.  You might need close to 160 optical discs.

  You can use Imgburn to determine the capabilities of the optical drive for media types.

  I have an HP internal optical drive (not the same as yours) and I used the below listed optical media with a high success rate.

  Verbatim 8 x DVD + RW 4.7 GB rewritable

  In extenso 2 x rewritable DVD + RW 4.7 GB

  In verbatim 2 X BD - RE 25 GB rewritable

  If your drive can handle the BD-RE XLthen each disc would hold 100 GB but $ 60 for 5 disks you might want to consider something else for archival purposes.

  I suggest to go with another hard drive external to the archive files like optical media and drives also are endangered.

  Thanks for posting on the forum.

• HP ENVY 850se Phoenix: HP ENVY Phoenix 850 DVD Drive

  Hello

  I just bought two HP ENVY Phoenix 850se computers.  I would like to return the DVD drive on one of them, 180 degrees so the axis to the other sense.  I studied the material and can't really tell if it is possible.  It seems that the bezel for the reader includes a curved upper part if it complies with the case.  I can't determine if this piece is 'readable' or not, and I thought that I post and ask here before tearing into it.

  Thank you!

  For those who follow along, the DVD player can not be returned because the bezel attached only one way.

• Satellite A-L50-1EK DVD not recognized after upgrade to Windows 10

  DVD does not now. I see device menager DVD but it have yelow attention icon. Have I can fix this?

  Try this:
  https://www.DriverEasy.com/knowledge...Maged-Code-19/

• HP Envy: plugged in, does not support

  I get a notification "plugged in, but not chargin.

  I tried to uninstall and reinstall the driver from the battery.

  I did the battery check and it came right back.

  I bought a new power cord, and I still get the same message.

  Hello @boskokitten,

  Welcome to the HP Support Forums, I understand that you have a problem on your Envy laptop with the battery to charge and I wanted to help.

  What laptop specific Envy do you have? This document will help you get the model number specific to your system.

  The system is able to turn on with just the battery installed? What is with the removed battery and just use the AC adapter?

  You can start with this document which will guide you through the adapter and battery, as well as how to calibrate the battery for troubleshooting.

  For more general information of battery performance you can click here.

  Please get back to me on how to get you out with these documents.

  If you find that solves your problem, please click to accept as a Solution while others can easily locate the information in the future and say thank you just click the Thumbs Up!

  Thank you!

• CD/DVD NOT DETECTED AFTER UPGRADE TO WINDOWS 10 DRIVE

  This morning (July 30), I've updated by computer for the operating system Windows 10.  Since then, however, my CD/DVD drive is not detected or recognized.

  The icon on my desktop has a big question mark on it.  If I click who, I get the following error message:

  The element 'E:\. ' that this shortcut refers to has been chnaged or moved, and this shortcut no longer works correctly.

  I looked in the Device Manager for the CD/DVD player, and there is nothing there.

  What happened and how to fix it?

  I had the same problem. It worked to fix my Windows 10 Pro system. Note This mentions 32 bits, but it worked for my Windows 64-bit 10. This was taken from http://support.hp.com/us-en/document/c03280768

  Resolution 5: Create a registry subkey
  Note to use this method, you must be logged on to Windows as an administrator. If you need help, check that you are an administrator, go to http://support.microsoft.com/gp/admin
  Important follow the steps described in this section carefully. Serious problems can occur if you modify the registry incorrectly. Before you edit, back up the registry to restore in case of problems.
  To create the registry subkey, follow these steps:
  Press the Windows logo key + R to open the run. (or right click on the windows down icon to the left)
  Type regedit in the run box, and then press ENTER. If you are prompted for an administrator password or a confirmation, type the password, or click on allow
  In the navigation pane, locate the following registry subkey:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\atapi
  Right-click atapi, point to new, and then click key.
  Type Controller0 and press ENTER.
  Right-click Controller0, point to new, and then click DWORD(32-bit) value.
  Type EnumDevice1 and press ENTER.
  Right-click EnumDevice1, click on change...
  Type 1 in the value data box, and then click OK.
  Exit Registry Editor.