Vostro 1500 - everything was suddenly good chart run slow

Similar Questions

• HP470 for Vostro 1500 wireless why it will work

  Try using a HP470 with wireless card and a Vostro 1500 laptop with a wireless card running on XP
  

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  I suggest you to check if the Wireless Zero Configuration (WZC) service is set to automatic in the Services.msc. Follow the steps mentioned below.

  a. Click Start, click Run, type %SystemRoot%\system32\services.msc/s and then click OK.

  b. double-click Wireless Zero Configuration.

  c. in the startup type list, click Automatic and then click on apply.

  d. in the Service status area, click Start and then click OK.

  Apart from that, I suggest running the fix that is present in the link mentioned below and check if the problem is resolved.

  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless

  http://support.Microsoft.com/kb/871122

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• computer running slow

  I bought an asus computer with windows 8 built in him, I've only used the computer for course and saving images on it however, I downloaded Microsoft and security, because he had not, but something went wrong and I had to reboot to factory settings and downloaded again Microsoft and everything was fine but a bit slow. Now, today, I got a message telling me that there was a problem with the computer and now it works very slowly.

  can someone help me please

  Have you seen a message like this?

  

  This means that the site has a script that takes a long time to run, and the page cannot continue executing until the script is done.   The script may have a programming mistake that requires him to never fill, which means that the site is "not responding" and you'll have to close it.

  This type of error is generally not something you can stop - only website programming team can fix the script error.  The best you can do on your end is to disable scripts, but that will usually almost all modern sites unusable.

• Problems with WiFi on Vostro 1500

  gSo, I got a vostro 1500 last year, it has been renovated and came with windows 7 32 bit edition Home premium installed - and the wifi worked perfectly.

  I downloaded and installed pcsx2 that in turn downloaded some other stuff that I don't really know.
  
  
  This is where my dilemma begins. Then the closure, it was apparently installing update, but the battery was 2% and he died while doing this. Subsequently I Plug and windows does not just start, it goes past the "starting windows" screen, but after that it does is display a black screen and never ending start.
  
  
  After days of constant frustration, I installed a new copy of windows 7 64 bit ultimate, this is where it started. My wifi does not work. He sees available connections, but does not just connect, and even if it is (after a long time) I get a limited connection, diagnosis me say "Wifi connection doesn't have a valid ip address" I tried everything I read online order winshock for re - a corner of the card wifi, re-installed the drivers - I get nothing. So for a week, I dropped the laptop, and when I put it on, it automatically connected to the WiFi in my house, so I unplugged it so that I can use it later, an hour later, I put the laptop wifi is back to his usual behavior
  
  
  So I tried to install the windows vista that came with it, and it has worked (. _.) Without install me all drivers his summer works fine but the problem is windows vista lag on this system and I can't continue to use it. I need a way to get wifi working on windows 7
  
  
  From what I can tell its using an intel 3945abg card.
  
  
  I think to buy a new wifi card, but the fact that it works on windows vista makes me think its more of a software problem, not hardware, and change the map will not solve the problem
  
  
  Please what do I do?

  The problem might be that you installed an operating system to 64-bit on a machine that has been designed and supplied originally from 32-bit (XP and Vista).

  In all likelihood, there is no good driver 64 bits for your Wi - Fi card, which would explain why it works with Vista 32-bit, Windows 7 32 bit, but what you have now.

  If you can figure out what adapter Wi - Fi you have, you might be able to get drivers 64-bit from the manufacturer of the device to save the day...

• Microphone doesn't work is not on my Vostro 1500 with Vista Ultimate

  I recently received my DELL Vostro 1500 which has a Sigmatel Soundcard and I installed Vista on it and found that Vista had already installed a generic driver of high definition for him. So, I was ok. But then I found that the built-in mic or even an external MIC does not work. I get a harwarde is unavailable or not installed error. Someone help me please...

  I browsed the forums and found a lot of pilots who are supposed to be its Sigmatel for Vista drivers, and whenever I tried to install one of them I get an object not found error or something similar to it.

  I have a dual-boot configuration, so I am running XP as well and everything works fine under XP with the drivers provided by DELL. But not on Vista...

  DELL technical support, it's not what I expected since I recently moved to this laptop from my previous HP-Compaq Presario 6000 and HP support was great, including the live chat with technical support people who helped me with my problems of pilot with this laptop. I now regret to have bought a DELL laptop, since I do not get the kind of service that I expected from DELL. In any case...

  SOMEONE... PLEASE HELP ME!

  
  

• I come to me on my computer and everything was gone. All my files, shortcuts and backround have simply disappeared. It's like I've never been on my computer before. I have nothing! How to get everything back?

  I come to me on my computer and everything was gone. All my files, shortcuts and backround have simply disappeared. It's like I've never been on my computer before. I have nothing! How to get everything back?

  You have been discharged into a temporary user account. It may be a glitch, or your user account may be damaged. First try a system restore when things worked. If it suits it, fine. If it is not then your account is damaged and the best thing to do is to create a new user account and copy your data from the old to the new. I would also like to do a Chkdsk and then some hardware diagnostics on the hard drive and RAM to make sure that the material is solid.

  CHKDSK - click here to open the computer. Right click on the hard drive you want to check, and then click Properties. Click on the Tools tab and then, under error-checking, click check now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will simply report a problem, but not to fix them.

  To perform a full disk check, select search and attempt to recover bad sectors. This scan is trying to find and repair physical errors on the hard drive itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.

  Click Start.

  Depending on the size of your hard disk, this may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

  Note: If you select automatically errors in file system of fix for a disc that is used (for example, the partition that contains Windows), you will be prompted, see the disk check for the next time you restart your computer.

  Hardware tests - http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  Corrupt user account - if your single administrative user account is damaged (and therefore have what one user account is A Bad Thing), you must log on to the built-in Administrator (disabled by default in Vista) account. From there, you can create a new user account for yourself. In these cases, I prefer not to copy the whole profile to a new way to do not copy the bits corrupt. I prefer a new user account to copy the data (documents, photos, emails, etc.). Here are the instructions to do this. I assumed that you had only an administrative account, then you might want to take a look at the "general recommendations for setting Up user accounts in Vista" at the end of this post.

  All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  Activation of the built-in administrator.

  Method 1. If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [Enter]

  If you do not have a Vista installation DVD, you can either make a bootable DVD of Vista repair in the file at this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD.

  After net user, remove the bootable CD and restart the computer. You will now see an icon for administrator on the Welcome screen. Connect to this account.

  Method 2. Or you can use NTpassword to enable the built-in administrator. In both methods, you need third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the .iso image image file, not in the form of data.

  http://home.eunet.no/pnordahl/ntpasswd/

  B. create a new user account for yourself and by copying data from your damaged to her user account

  1. you are now connected to the built-in Administrator account. Go to control panel > user accounts and create a new Standard user for your daily work. Let's call it "Sheldon" for this example. Also create an administrator user, called 'CompAdmin' (or 'Tech' or similar).

  4 Ouvrezunesession 'Sheldon' once for profile files are created. Now log off 'Sheldon' and 'CompAdmin '. In "CompAdmin", disable the built-in security administrator. Do this from a command prompt:

  Start > Search > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator". Provide the password/OK to the UAC prompt. Now, you will get the command prompt. Type:

  NET user administrator / active: No. [Enter] and exit the command prompt.

  5. always in 'CompAdmin', you want to open two windows explore side by side. Open computer and navigate to C:\Users\old-corrupted-account. Now, do that again, but navigate to C:\Users\Sheldon. Copy the data from 'old-corrupted-account' on records in 'Sheldon '. Remember your Favorites, bookmarks (if you use Firefox) and by e-mail if you use an email like Windows Mail client.

  6. When you are finished, log in to "Sheldon. All your stuff should be there. When you are sure to have what you need, you can remove the old man-corrupted-account control panel > user accounts.

  General C. recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is an OS multi-user with system built-in accounts such as administrator, by default, all users and guest. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it will take third-party tools and work outside the operating system.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null). MS - MVP - Elephant Boy computers - don't panic!

• Windows Media Player 11 I am unable to play some CDs that I downloaded. Previously everything was fine. Thank you

  Windows Meddia Player-11, I am unable to play some CDs that I downloaded.  Preeviously everything was fine.

  Hello

  You shouldn't have two main products installed on the same machine, much less running antivirus.
  They interfere between them which effectively reduces your protection. Add the remnants of evil
  products withdrawn, much less still installed pieces of those ongoing, can and cause strange problems.

  Please reduce down to a single antivirus only. Go to the website of each manufacturer of ALL you had on that
  computer and get their REMOVAL tools and run.

  I'd keep Avira as NOD32 has been known to cause problems.

  This might not help you problem however several antivirus programs could easily
  a type of corruption that caused it.

  Rob - bicycle - Mark Twain said it is good.

• Everything was fine until my Windows 10, lost the start feature, if I ever go back to Windows 7, in this process, I lost my Adobe Reader software, I tried about ten times with different versions and different locations, all with the same download error

  Please forgive me for not knowing how to use this forum, I am an old man and not good at computers, I called Adobe, they said it was my only hope!

  Sorry to repeat

  Everything was fine until my Windows 10, lost the start feature, so I had to go back to Windows 7, in this process, I lost my Adobe Reader software, I tried about ten times with different versions and different locations, all with the same error message that is download "the feature you are trying to use is on an unavailable network resource"... are looking for It seems that it does not find when I search there, and I no longer seem to have the AcroRead.msi... the most difficult file, I try, I get deeper and deeper into things I don't know... I am looking for a simple solution!

  When it gets to this point, it is probably better to start from scratch.

  First of all, download, install and run Adobe Reader cleaning tool to get rid of all remains little. Here is a link to the tool: Download Adobe Reader and Acrobat tool - Adobe Labs

  Then go to the following link to download the full installer for the reader.

  https://get.Adobe.com/reader/Enterprise/

• My MacBook suddenly started running slow

  Reading this thread: my MacBook suddenly started running slow

  I followed the instructions of Linc Davis to post the following are produced by the Terminal application and using the command:

  syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|find tok|n Cause: -' | tail | open -ef

  The following text has been updated with the door...

  Jan 29 06:47:19 core Mason-MacBook-Pro [0] : cause of previous stop:-60

  30 Jan 10:01: 18 localhost kernel [0] : cause of previous stop:-60

  30 Jan 10:19: 49 kernel Michael-MacBook-Pro [0] : SSanadnbdobxox: Sandboxmdmwdowrokrekre (r(: 38838) 5md woden) YY (d1e) n (f1) I i/oAns/ppClialceatindar.apop/Cns/onCatelnentdasrer d/Ap-daplticaat lef-irleea-dr-edaatark. () / Mapp/acO38S/CCona7) lteentn sd/MaacOrS /.

  30 Jan 10:19: 57 kernel Michael-MacBook-Pro [0] : SSaandndbobox: x: mmdwodrwkeorkrer ((385387)) dendeyny ((1) 1) fifillee-read-r-dateaad-d/Aatppal ination/Applionscati/oGansme /GaCentme er. Capenp/Contetern.ats/pMacpOS

  Jan 30 22:52:48 core Mason-MacBook-Pro [0] : nspace-Manager-unlock: found no token 11211

  3 Feb 07:16:39 localhost kernel [0] : cause of previous stop:-60

  There was several abnormal stoppages in the last days. A negative stop code may indicate a hardware problem. The precise meaning of the codes is not publicly documented.

  If you haven't already done so, you can try to reset the system management controller. Otherwise, or if the reset has no effect, see below.

  Do a 'genius' one appointment at an Apple Store, or select another authorized service provider. You may need to leave the machine there for several days.

  Back up the data on the internal disks before you turn on your computer to anyone. There are ways to back up a computer that is not fully functional - ask if you need advice.

  If privacy is a concern, delete the partitions of data with the ability to write zeros * (do it only if you have at least two backups complete, independent, and you know how to restore on a blank disc from any one of them.) Do not delete the recovery partition, if it is present.

  Keep your confidential data safe during the repair of the equipment

  Apple recommends that you remove permission to a device in the iTunes store before serving.

  * One SSD has no need to be set to zero.

• my sex cam dell vostro 1500 is not working or projection in Device Manager

  my sex cam dell vostro 1500 is not working or showing in the Device Manager, my cyberlink ucam tells me that there is no deevice of captuing.

  I really don't understand because the built-in webcam or imaging is supposed to show in the Device Manager, but it does not appear.

  I am using windows 7 ultimate.

  Hello

  Troubleshoot camera connection
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

  You probably need to recharge the device drivers and camera control software (usually included
  with the drivers and installed at the same time).

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Manually look at the sites of the manufacturer for drivers.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ----------------------------------------------------------------------------

  Check with Dell Support, online documentation and drivers (update or reinstall), and
  their forums.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I turned my HP laptop off last night and my screen and everything was fine. When I opened this morning my screen was all blurry

  I turned my HP laptop off last night and my screen and everything was fine. When I opened this morning my screen was all blurred and distorted. It drives me crazy: () I tried to calibrate it using the tools of systems, but all appears correctly be set. Can someone help me? It drives me crazy. This laptop is nearly 2 years old

  Hello

  You should ask in the answers – Windows Forums for your version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  =================================================================

  Check with HP Support, their drivers and documentation online and ask the HP
  Forums for known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ---------------

  It's my generic how updates of appropriate driver: (update video drivers.)

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  I hope this helps.

• Vostro 1500 "no audio device" in Windows XP

  I bought a Vostro 1500 with Vista and XP Pro has added in a configuration to dual-boot.  Everything works well except that I have not been able to get the Sigma sound card to work.  I downloaded the correct driver (R158235), depending on the site of Dell, installed and still no audio device detected by XP.
   
  Any ideas?
  
  

• USB ports not working not not in Windows 10 after update laptop (Vostro 1500)

  I updated an old laptop, Dell Vostro 1500 from Windows 7 to Windows 10. Everything is great, the touch pad works, it is much faster than it used to be, one thing is, none of the USB 4 ports work.

  I went to the dell website, all I get is an alert indicating the device is not compatible with Windows 10 and that everything is up to date. I couldn't find the specific drivers on the website of intel and their program detects that too, everything is up-to-date

  I have google and could not find anything other than sites like pilot scape, which I don't know

  In Device Manager, there are 14 points to USB, there are 7 USB Universal Host Controller family with 2830-2836 A numbers

  Besides, there are 7 USB Root Hub with an error symbol. When I check the properties I have "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged (code 19)"".

  I tried to uninstall and looking for changes, that did not work. I also tried fix registry of CCleaner

  What are my options, is it possible to get USB ports work on my laptop?

  Thank you

  Hi Benny,.

  If please see my previous response to jtrand02 and click on the link for a list of compatible systems.

  The model of your system is not compatible with W10. I advise you to stay with W7/W8.1 unless you want to try your luck with W10.

  Let us know if you have any other questions.

• Dell Vostro 1500 - Wireless driver for Windows XP

  I can't install the driver for my device wireless on my laptop Dell Vostro 1500 running Windows XP Professional. The laptop came with Windows Vista Basic Edition. I tried to install the driver for Windows XP from the CD of original drivers that came with the laptop and also by downloading from the Dell Web site. The pilot program installs without giving an error, but after installation of the unit is still not functional and Device Manager shows no information on wireless hardware.

  My system spec is as follows:

  -Model: Dell Vostro 1500

  -Operating system: Windows XP Professional

  -Processor: Intel Core 2 Duo 2.2 GHz

  -Memory: 2 GB

  -Video card: Mobile Intel (r) 965 Express Chipset Family

  
  

• My computer crashed and after the purchase of another, I used the Migration Wizard to copy all the files to the new computer.  Everything was going well until I tried to launch LR6.  It was two weeks ago and a search for many pages of the Adobe Web site. 

  My computer crashed and after the purchase of another, I used the Migration Wizard to copy all the files to the new computer.  Everything was going well until I tried to launch LR6.  It was two weeks ago and a search for many pages of the Adobe Web site.  I think I've exhausted all the remedies listed without success codes error A12E5 to questions cloud creative, Manager of Application and error 1: Configuration problems.  I'm ready to reformat my computer and try again with Time Machine.  Help would be greatly appreciated before I waste more time on this task. Any further suggestions?

  Migration of Mac with Time Machine WILL NOT WORK with the Adobe program activations due to hidden registration files

  Sign out of your account... Uninstall... to run vacuuming...

  -non-Cloud programs, to disable the service before uninstalling

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and before reinstalling is often necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  -Restart your computer... Sign in to your account... Reinstall