VPN and CSC Modul

Similar Questions

• Is a CSC module must use Smartfilter with an ASA 5510?

  We use a PIX 515E and an external Smartfilter server for URL filtering for many years. Works well, but we want to add the IDS feature. The road ahead for this seems to be to get an ASA 5510 with AIP module. Can anyone confirm if we continue to use the order of FILTER of URL (with Smartfilter specified as a salesman and pointed to the IP address of the server Smarfilter) as we do on the PIX? Sales of Cisco tells me that I need a module of CCS for it which means I can't have a module AIP, but the way I read it which seems to be only if you use URL of the CSC (user account subscription) database to perform the filtering. We do not want. We left 3 years on our contract of Smartfilter. I just talked to someone who has an ASA 5510 without a CSC module and it was successfully entered a FILTER of URL command in his ASA, as you would on a PIX. Why wouldn't work?

  for the URL filtering, NO, you need not any type of license, this isn't a feature defined licensed, its rather a feature of configuration

• ASA with CSC-Module

  Hello!

  I have a few questions about the user on CCS-Module license.

  1 how CSC Module checks the number of users using, be it mac-addresses or what?

  2 How long the user will take a license after disconnecting all sessions through the ASA.

  3. what happened when activ users exceeds the threshold of 500?

  / Best regards

  A user is considered to be an IP address. The number of users is a total over a period of 24 hours on all interfaces except the outside.

  You will get a notification if the CSC is greater than the user limit and will also receive the performance issue.

  Check this link http://www.cisco.com/univercd/cc/td/doc/product/multisec/modules/cscssm/cscssm60/csc60adm/index.htm

• Blocking of the internal services of VPN and Proxy

  Hello

  I have some users with Windows 7 and MAC laptops inside my network domestic who is protected by the R7000.

  I'd like know if its possible to block sessions VPN and Proxy, initiated from these internal, to communicate with Internet computers.

  Thank you

  Try VPN Service to block.

• Custom hardware and the module of ARM

  Hello world

  Our company is in the early stages of designing a custom measuring device. In the past we used Microchip microcontrollers (PIC16 and 18), a simple IDE and a C compiler, but for the new generation of devices we will use microcontrollers from Luminary Micro ARM. Since we are also users of LabVIEW, the choice for the LabVIEW embedded module for ARM seems logical. I read a lot of documentation OR and watched the tutorials, but I'm still uncertain on what we may or may not do with the module. Until we buy eval kits and the module, I need to have some facts.

  1. The 'heart' of our circuit is a microcontroller LM3S1968, this MCU is ARM Cortex-M3 based. It is listed in Keil device database (http://www.keil.com/dd/), then is also a LabVIEW "Tier 1" - peripheral (http://zone.ni.com/devzone/cda/tut/p/id/7066)? ".
  2. What I have to add the MCU manually to the project as described in http://zone.ni.com/devzone/cda/tut/p/id/7152, or can I just it select from a menu?
  3. We already have a LM3S1968 evaluation kit (http://www.luminarymicro.com/products/lm3s1968_evaluation_kits.html) and a programming JTAG device. We can use these hardware components to evaluate the LabVIEW ARM module or should I buy a complete kit of NOR (including the dev board)?
  4. Is a JTAG connector on our device and a connection for a JTAG debugger, all I need for debugging the device with LabVIEW?
  5. Assessment OR (http://sine.ni.com/nips/cds/view/p/lang/en/nid/205040) kit includes JTAG Keil ULink2 adapter on the photo?
  6. We want to connect the MCU to a converter A/D, the AD7738 of Analog Devices (http://www.analog.com/en/analog-to-digital-converters/ad-converters/ad7738/products/product.html). We will use the SPI bus for communication and I know what codes to send to get a basic reading. What I need to use the SPI-Subvi and send the hex codes or can I use a Subvi 'AD7738' built-in device drivers CD?

  I apologize in advance for the number of questions, it's just that the use of LabVIEW for the development of material is completely new to me

  Thanks in advance for your help.

  Paul

  Hello Paul!

  I'll try to answer your questions and I hope someone else can add more information if necessary.

  1. The 'heart' of our circuit is a microcontroller LM3S1968, this MCU is ARM Cortex-M3 based. It is listed in Keil device database (http://www.keil.com/dd/), then is also a LabVIEW "Tier 1" - peripheral (http://zone.ni.com/devzone/cda/tut/p/id/7066)? ".

  Answer: no, that would be a level 2 device, we now offer three level 1 devices and information on these can be found on the link you condition.

  1. What I have to add the MCU manually to the project as described in http://zone.ni.com/devzone/cda/tut/p/id/7152, or can I just it select from a menu?

  Answer: you need to add yourself as described in the link you provided.

  1. We already have a LM3S1968 evaluation kit (http://www.luminarymicro.com/products/lm3s1968_evaluation_kits.html) and a programming JTAG device. We can use these hardware components to evaluate the LabVIEW ARM module or should I buy a complete kit of NOR (including the dev board)?

  Answer: is trickier, LV Module Embedded for ARM in trial mode will have some limitations (size applications, can open the development environment for a number of days and so on), but it should not have limits when it comes to other targets as described in the links that you have already provided. When it comes to the JTAG interface, I would recommend using the Keil ULINK2 USB-JTAG.

  1. Is a JTAG connector on our device and a connection for a JTAG debugger, all I need for debugging the device with LabVIEW?

  Answer: I would like to make use of the Keil ULINK2 USB-JTAG Adapter for debugging and allows us to download the code on the target. In fact, it's the only way we can download code on the ARM, but we can use a serial port / TCP in addition to JTAG debugging.

  1. Assessment OR (http://sine.ni.com/nips/cds/view/p/lang/en/nid/205040) kit includes JTAG Keil ULink2 adapter on the photo?

  Answer: Yes.

  1. We want to connect the MCU to a converter A/D, the AD7738 of Analog Devices (http://www.analog.com/en/analog-to-digital-converters/ad-converters/ad7738/products/product.html). We will use the SPI bus for communication and I know what codes to send to get a basic reading. What I need to use the SPI-Subvi and send the hex codes or can I use a Subvi 'AD7738' built-in device drivers CD?

  Answer: I/O could be implemented using the basic IO layer provide us as described here:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/7119

  http://zone.NI.com/DevZone/CDA/tut/p/ID/7144

  I hope this helps!

• Find the cDAQ and command module at startup

  Hello

  I have a cDAQmx (8 slots) with USB port and a module of series C. 4 modules are digital 4-channel input (up to 220 v), 1 analog input, analog output 1, 2 digital output, etc...

  I want to make my program (for testing electronic cards) is:

  (1) at startup, check if the cDAQ is present in the system (i.e. USB is plugged, drivers were already installed correctly)

  (2) also check the modules which are plugged into the cDAQmx and check if they are in the correct order.

  For example, to test the product X I need two digital inputs to slot 1 and 2 and an analog input to slot 3.

  I ask this because people in production could make the mistakes I want to avoid:

  (1) avoid forgetting to plug in the USB and begin the test

  (2) avoid to connect the wrong terminals! The plug is the same for each module, so it is possible teoretically put the connector in a 10V analog input to 220V, causing a serious injury (I know they are protected, but I want to avoid this risk).

  For the chassis, you should be able to query "Device Module names" to get the name of each module currently in the chassis:

  

• PoCL FlexRIO 7962R and 1483 module

  Hi people!

  I use a platform SMU make some video acquisition/processing. I use a 7962R with a module of 1483 FlexRIO (and therefore a connection Camera Link between the 1483 and the camera).

  With the help of examples of LabVIEW, I managed to develop a project to acquire videos and save them on the hard drive of the control. In this application, the device is powered by its own cable, separated from the Camera Link cable to connect the camera and the module of 1483.

  Now, I would like to use the CL cable to power the camera and get rid of the other cable. CL cable I use is compatible with Power over Camera Link. But I can't find any information on the weather the FlexRIO 7962R and 1483 module allow to use PoCL or not. Does anyone have information on the PoCL? You have an idea on how I can do with the platform that I have?

  I had a look on the specifications of a capture card that I use on another computer. It seems that PoCL is provided via pins 1 and 26 of the CL connector. Does anyone know if the pins 1 and 26 are connected to the electronic circuit of the 1483 module? Is it possible to configure the FPGA so that power can be delivered through these pins?

  Thanks in advance for your answers.

  Nice day.

  Luke

  1483 can't PoCL. A re DGND-pin 1 and 26.

• RVL200 - SSL VPN and firewall rules

  Forgive my ignorance, but I have been immersed in the configuration of this device RVL200 to allow Remoting SSL VPN to a customer site, sight unseen.  I have the basics of the VPN set up in config, but now move the firewall rules.  We want to block all internal devices to access the Internet, but I don't want to cripple the remote clients that will be borrowed by blocking their return via the SSL VPN traffic.  This leads to my questions:

  (1) a rule of DENIAL of coverage for all traffic OUTBOUND will prevent the primary function of the VPN (to allow the administration away from machines on the local network)?

  (2) if the answer to #1 is 'Yes', what ports/services do I need to open the side LAN?

  (3) building # 2, configuring authorized outbound rules apply only for VPN clients, rather than all the hosts on LAN?

  (4) as the default INCOMING traffic rule is to REFUSE EVERYTHING, do I have to create a rule to allow the VPN tunnel, or guess that in the configuration of the router?

  Here are some other details:

  • The LAN behind the RVL200 is also isolated LAN in a manufacturing environment
  • All hosts on this network have a static IP address on a single subnet.
  • The RVL200 has been configured with a static, public IP on the WAN/INTERNET side.
  • DHCP has been disabled on the RVL200
  • Authentication to the device will use a local database.
  • There is no such thing as no DNS server on the local network
  • The device upstream of the RVL200 is a modem using PPPoE DSL, and the device has been configured for this setting.
  • Several database of local users accounts were created to facilitate the SSL VPN access.

  I worked with other aspects of it for a long time, but limited experience with VPN and the associated firewall rules and zero with this family of aircraft.  Any help will be greatly appreciated.

  aponikikay, there is no port forwarding necessary to the function of the RVL200 SSL - VPN.

  Topic 1. That is not proven. It shouldn't do. The router should automatically make sure that the SSL - VPN router service is functional and accessible.

  Re 2. No transfer necessary. In addition, never before TCP/UDP port 47 or 50 for VPN functions. The TCP 1723 port is used for PPTP. UDP 500 is used for ISAKMP. You usually also to transmit TCP/UDP 4500 port for IPSec encapsulation.

  Let's not port 47. ERM is an IP protocol that is used for virtual private networks. It is a TCP or UDP protocol. GRE has 47 IP protocol number. It has nothing to do with TCP or UDP port 47. TCP and UDP are completely different protocols of free WILL.

  It goes the same for 50: ESP is the payload for IPSec tunnels. ESP is the Protocol IP 50. It has nothing to do with TCP or UDP port 50.

  'Transfer' of the GRE is configured with PPTP passthrough option.

  'Transfer' of the ESP is configured with IPSec passthrough option.

• HP Pavilion 17-e135sw F9V61EA: how meny memory locations are in and and memory modules can be used

  HELO

  How meny memory locations are in and and the modules of memory can be used?

  Have a nice day

  There are two available slots. Replace the memory in identical pairs.

  Do a Google or Bing search with 17-e135sw + upgrade memory as search terms. Single purchase guaranteed manufacturer\vendor guaranteed-compatible memory.

• Process host and Windows Modules Installer has stopped working and was closed!

  Hello

  Some error messages I get are "host process for Windows Services stopped working and was closed" and "Windows Modules install Stopped Working and was closed."

  It didn't happen until three weeks ago, when I did a system restore.

  I searched the internet for a while now and can't find anything.

  Thanks I hope you can help,

  Michael

  Hi Michael2017,

  1. did you of recent changes on the computer?

  2. When you receive the error message?

  3. are you able to install updates on the computer?

  Windows Module installation service are the two basic services responsible for all your updates installed correctly. Windows Module Installer service enables installation, modification, and removal of Windows updates and optional components. If the Windows Installer of Module service is disabled, install or uninstall windows updates may fail.

  Check and make sure the installation Module of Windows service is running on the computer

  (a) click Start; in the start search type services.msc and press ENTER.

  (b) ensure that the installation of Module Windows Service is running and the startup type must be handwritten.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Connect to VPN and then log on to the domain by using different credentials.

  I have a laptop user who will take care of various remote sites.

  In XP, you had to first use DUN/VPN and then you can log in the field with different credentials that the VPN end point.

  With Vista if I use the method user to switch on the logon screen and the log in the VPN it also attempts to use these credentials for the domain.  The VPN device has its own separate authentication of the AD.  How to restore the loss of functionality that Vista has?

  I have to first connect to the VPN appliance and authenticate to that I do the network connection.  Then, I need vista to propose real logon to the computer or to the domain.

  I appreciate the help.

  Computers in discontinuous bench

  Hi StapleBench,

  The question you have posted is related to the VPN and domain environment is better suited in the TECHNET forums, and as I see that you already post your query in the TECHNET forum in the following link:

  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/thread/f8579344-07f1-4855-8599-e55a0430c5f8

  I suggest you wait for a response on the TECHNET itself thread.

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• site2site distance-VPN and access-PIX - no way?

  I have,

  I have a problem wrt site2site & VPN remote access on a PIX:

  My setup is as follows: PIX (6.3) puts an end to two a site2-site VPN and also should the remote access service clients using the client VPN Cisco (4.0.x).

  The problem is with remote access VPN clients, obtain an IP address on their VPN interface, but customers cannot reach anything. (Please note that the site2site VPN runs without problem)

  To be precise (see config-excerpts below):

  The customer, who has 212.138.109.20 as its IP address gets an IP 10.0.100.1 on his card-VPN which comes from the "vpnpool of the pool.

  configured on the PIX. This customer relationships to reach servers on interface 'inside' of the PIX as 10.0.1.28.

  However, the client cannot achieve * nothing *-a server on the inside or anything like that (e.g. Internet) outside!

  Using Ethereal traces, I discovered that the packets arrive inside interface coming 10.0.100.1 (IP address of the)

  VPN - client). I also see the response from the server (10.0.1.28) to 10.0.100.1. However for some reason any package does not thanks to

  the PIX to the customer. PIX-newspapers also show packets to and from the VPN client to the inside interface - and * no. * drops. So to my knowledge the packets from server to the VPN client really should be done through the PIX.

  I have attached the following as separate files:

  (o) the parts of the PIX config

  (o) packets showing PIX-log between the VPN client and the server (s) on the interface inside

  (o) ethereal-trace done inside the watch interface also packets between VPN client and server (s)

  I have really scratched my head for a while on this one, tested a lot of things, but I really don't know what could be a problem with my

  config.

  After all, it really should be possible to run site2site - and on the same PIX VPN remote access, shouldn't it?

  Thank you very much in advance for your help,.

  -ewald

  I think that your problem is in your ACL and your crypto card:

  access-list 101 permit ip 10.0.1.0 255.255.255.0 10.0.2.0 255.255.255.0

  access-list 101 permit ip 10.0.0.0 255.255.255.0 10.0.2.0 255.255.255.0

  access-list 101 permit ip 10.0.3.0 255.255.255.0 10.0.2.0 255.255.255.0

  access-list 101 permit ip 10.0.1.0 255.255.255.0 10.0.100.0 255.255.255.0

  correspondence address 1 card crypto loc2rem 101

  This means that this map correspond to these addresses. But your dynamic map is one that must match 10.0.100.0, 10.0.1.0 traffic because your pool local ip is 10.0.100.x. I think what is happening is that the return traffic from the lan to vpn clients trying to get out of the static tunnel, which probably does not exist (for the netblocks - you probably have a security association for each pair of netblocks, but not for vpn clients) and so do not.

  I would recommend adding these lines:

  access-list 105 allow ip 10.0.1.0 255.255.255.0 10.0.2.0 255.255.255.0

  access-list 105 allow ip 10.0.0.0 255.255.255.0 10.0.2.0 255.255.255.0

  access-list 105 permit 10.0.3.0 ip 255.255.255.0 10.0.2.0 255.255.255.0

  no correspondence address 1 card crypto loc2rem 101

  correspondence address 1 card crypto loc2rem 105

  Then reapply:

  loc2rem interface card crypto outside

• Question of VPNS and router

  Hello

  I currently have a RV042G in my company.  It works fine, but I was looking for a solution that would allow me to use VPN so that I can tunnel inside and then again connect to the internet via the tunnel.  I want to have a way secure to connect to internet from my laptop while I am travelling and prefer to build my own VPN and do it myself.

  If I understand correctly, the RV042G does not allow this and it only access to the local network via the tunnel. What would be the next router allowing him to fill this purpose?

  Thank you!

  Hi rodman

  These devices work fine, you can also use third-party software not only software from Cisco to use the VPN features. On subscriptions, IAPH supports more special features such link Protect and IP addresses and you can have and buy a subscription in order to add these features to your device, however, if Don t you want what they you don t have to buy.

  Cisco provide one of the best support, it has plenty of support, it is possible via chat, email or telephone, it also provide assistance free of charge for the users of this forum if you don t buy a warranty

  I hope you find this answer useful,

  * Please answer question mark or note the fact other users can benefit from the TI *.

  Greetings,

  Johnnatan Rodriguez Miranda.

  Support of Cisco network engineer.

• AnyConnect VPN and LAN access

  When remote users to connect to the Cisco ASA VPN and authenticate with Cisco AnyConnect client, they then full access to the environment internal of LAN of business as if they were sitting at their desks in the Office of the Corporation.

  Right?

  After that the remote client authenticates to the AnyConnect VPN, it is sensible to then run remote users of traffic through the corporate firewall (outside to inside) before allowing LAN access full corporate?

  Remote_User - vpn - ANYCONNECT-(outside) (inside) firewall - CORP_LAN

  Thank you

  Frank

  Hello

  Yes, by default, all traffic will be sent through the tunnel.

  If there are users VPN shouldn't be able to reach the resources, you need to establish rules for access to it. The best way to do this is by using VPN filter.

• Mac, VM XP Pro, Cisco VPN and printing.

  I have an end-user running a Mac with a virtual XP Pro Machine that connects to our VPN corperate machine. This part works fine. Problems happen when he tries to print to a network printer. The job is just until it disconnects from the VPN and then it prints very well. No one knows what to do to fix this? I have little or no knowledge of MAC.

  Kind regards

  Dan

  This could be the reason why printing does not work. To print traffic really vpn tunnel as split tunnel is not configured.