VPN connection stops and I have to manually start
Hello
New IM community of cisco, I have a problem with a vpn between places, it stops and I have to manually start whenever he fails. It fails as once in the morning and the afternoon. I hope someone could help me thanks
Location has
SRP 521w
version 1.01.23
Internet connection 12 MB down, 6 MB upward
table of IKE
main mode Exchange
Encryption algorithm: 3des
Authentication algorithm: md5
The Diffie - Hellman (DH) Group: 1024 bits
Turn Dead Peer Detection: | Turn off turn on |
DPD interval 30 DPD timeout 120 NAT t disabled |
|
IPsec policy
disable the PFS
life of his 7800
Encryption algorithm: 3des
The integrity algorithm: md5
Activate Dead Peer Detection
Location B
wrv210
version 2.0.0.11
Internet connection 12 MB upwards, 3 MB down
NAT t disabled
Mode of operation: main
ISAKMP encryption method: 3des
ISAKMP authentication method: | MD5 SHA1 |
SAKMP DH group: 1024 bits Lifetime key ISAKMP (s): 28800 |
PFS: enable
CIMP encryption method: 3des
IPSec authentication: md5
Lifetime (s) - IPSec keys: 3600
Detection mentioned: 30
Detection Timeout (s) 120
Activate Dead Peer Detection
Action of DPD: retrieve the connection
If IKE has no more 5 times block this IP unauthorized 60 seconds
activate antireplay
disable the pfs site B.
Tags: Cisco Security
Similar Questions
-
MY VAIO LAPTOP(VGN-CR353) RANDOMLY STOPS AND TAKES MORE TIME TO START. SOMETIMES IT STOP WHEN STARTING
It seems that the laptop may be overheating. Are you sure there is enough air past for laptop? Make sure that it is on a flat surface, with nothing to obstruct the ventilation openings. Make sure that the vents and fans and heat sinks are free from dust - examine their blowing with compressed air (power of the system first, of course). Depending on the laptop model, it may be relatively easy to blow off the dust with compressed air, or otherwise clean up things a bit. Fans should be kept up well - only no right turn when being ripped off. My Dell laptop has a removable fan (two small screws need to be removed) that can easily be blown. This also allows access to the fins of the heatsink.
Some laptops also have a removable filter that traps the dust and must be regularly inspected and cleaned.Are all the BIOS settings for the adjustment of the temperature, the value lower than the manufacturer's recommendations and the default values (you need to check the manual of your laptop for this). Also make sure you run the latest version of BIOS (again, the manual of your laptop would have the details; the manufacturer's website should also have this information).
-
When I restart my computer stop it crashes and I have to manually turn off
When I restart my computer, it freezes and won't until you restart. I have to manually turn the
Follow these steps to try to solve your problems of boot.
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
http://www.windowsvistauserguide.com/system_restore.htm
Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use:
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner:http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
See you soon.
Mick Murphy - Microsoft partner
-
After about 10 minutes connected my connection drops and has you keep resetting my hub [BT Hub]
Hello
What operating system is installed on the computer?
Method 1: I suggest that you follow the instructions from the link and check if that helps:
http://BT.custhelp.com/app/answers/detail/A_ID/7609/~/my-broadband-connection-keeps-dropping
Method 2: Follow the steps in the link and check if it makes a difference:
-
Why my computer changes from my home group without doing me something?
Whenever I turn on my computer, I have to open network and sharing Center Center to REMIND my computer how to connect WiFi network to?Hi Martin,
1. What is the operating system installed on your computer?2 did you change on your computer before the show?I suggest you to follow the steps and check if it helps.Follow the steps and check if that helps.(a) will begin.
(b) type run in the search box (if you are using Windows XP click Run) and open it.
(c) type "services.msc" and then open services.
(d) scroll down to "wlan auto config" right-click, then click on stop the service
(e) now go to
"C:\ProgramData\Microsoft\Wlansvc\"interfaces"everything in this folder, leaving only a folder called 'profiles' delete and delete everything in the folder"profiles"with the exception of a folder called"interfaces"delete everything in the folder)
(f) restart "wlan auto config" by following steps 1 to 4.
(g) to connect to your wireless network,
(h) enter your password (make sure that the connection is automatically checked)
(i) restart your computer -
always when I start windows was not detected my wireless network, I should start the WZC repair whenever detection networks and my connection, I have configured this Service aoutomatic but she never starts aoutomatically and I should start it up manually... can help me to solve my problem with my wireless connection?
My OS: windows xp sp3 and I use Dell Vostro1520
original title: wireless connection problem
I GOT THE SOLUTION OF MY PROBLEM:
- right-click on my wireless connection click on -> status
- in the window on the general tab, I click on the -> properties button
- in the open window in the general tab I click the button -> Configure...
- in the open window, I go to the tab Advanced to->
- in the ->property: box, I select the element -> WZC managed Ethernet
- in the box -> value I selects the item -> Enabled
- I click the button OK to-> .
NOW MY WZC SERVICE IS AOUTOMATICALLY BEGINS AT THE START OF MY WINDOWS.
-
Theres times that I am on my computer and I lose the connection and theres times I'm on facebook or a game. And I try to go up and down. and stop it stops in the middle of a game or facebook. Sometimes it I see the line over and over again.
Hi Jo AnnHerrera,.
What browser do you use to play games?
You can visit Windows update history to check the recently installed updates, failed.
Check the update history to see what updates have been installed. Visit the below mentioned link.
See the Windows updates are installed
http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed
If you use Internet Explorer to play games, refer to the suggestions from this link.
The problems of games online using Internet Explorer
http://support.Microsoft.com/kb/2528246I hope this helps.
-
I'll be in a Web site and the spinney wheel tells me that Firefox is stuck. I have to leave Firefox, then open it. The message "Firefox is embarrassed" appears and tells me he "struggles to recover windows and tabs. He tells me to close recently opened websites... then I restore my site.
This ritual occurs every few minutes over and over again.
How to do things to normal?I have the same problem. Then please give us a solution. Appreciate it.
-
Log in to the window - Skip connect you and automatically have the beginning of the correct username
When I start Windows XP, I now get a window with 2 user names and instructions "to begin, click the user name.
Clicking on a user name takes me on the current desktop
Clicking on the other one takes me for a desktop very, very oldI returned home without password to activate one or the other.
Is it possible to simply ignore this screen and have the correct username just start automatically?
THX
Try this:
"How to turn on automatic logon in Windows XP"
<>http://support.Microsoft.com/kb/315231 >HTH,
JW -
Product
Host process for Windows Services
Problem
Stopped working
Date
04/08/2010 17:28
Status
Solution available
Signature of the problem
Additional information about the problem
Bucket ID: 1288359239
Problem event name: APPCRASH
Application name: svchost.exe
Application version: 6.0.6001.18000
Application timestamp: 47918b 89
Fault Module name: ntdll.dll
Fault Module Version: 6.0.6002.18005
Timestamp of Module error: 49e03821
Exception code: c000071b
Exception offset: 000888f5
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional information 1: 0e02
More information 2: b21b56b606e7544720668ce364087082
3 more information: 0e02
Additional information 4: b21b56b606e7544720668ce364087082
Try a system restore to a Date before the problem began:
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
http://www.windowsvistauserguide.com/system_restore.htm
Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.
See you soon.
Mick Murphy - Microsoft partner
-
The print spooler stops and I'm unable to start
I have a HP Officejet Pro L7680 all-in-one that has stopped printing because of the stopped print spooler. The printer is connected to a local network. My OS is Windows 7. I tried Wizard solutions HP that does not help or give answers. All I get is error 1053 has failed at the beginning or demand for appropriate ion Conytol. What should I do to start the print spooler?
To start the spooler go to the start menu and select Control Panel then Tools administration and select Services, and then scroll until you see print spooler. If the spooler is running, then select Restart the service, and then try to print a document.
Let me know how it goes.
-
I just set up a new computer and have windows 7 home in windows XP and formerly on my Windows 7 laptop when I got to the top of the Media player, it is always picked up with the last song playing when I stopped it now on my new computer and laptop when I restart the game, it starts at the 1st song in the library , how can I do start with the last played I was not able to find something that will tell me
Thank you
This isn't a feature of this program, he remembers of this piece has been played last time.
-
My MacBook Pro retina display suddenly stop today and I had to reset the SMC to make it work again (I had a few problems with the reset it) but now, if I unplug the charger it will stop and I have to reset the SMC to run it again and I can't seem to stop the noise of the fan th What should I do?
With the operation of MBP, if you open information system (Option key down in the Apple Menu), what does say in material > Power?
-
Try to create a new VPN connection but Creat new network connection is grayed out
Hello world
Thank you for your help in advance.
I would like to ask why I could not create a new VPN connection as the "Creat new network connection" is grayed out. I'm also sure that remote access connection manager, and another car once are started.
I can create an account with my domain administrator account. But once I passed the orginary user, the shortcut to the connection could not be accessed. I also tried to add the user to the local Administrators group, and the result is the same.
HOEP that you can help.
Thank you.
Windows XP Service Pack 3?
Do you have any software security 3rd party running on this computer? Or maybe something in group policy that limits access to create a new network connection?
-B-
http://www.officeforlawyers.com | http://www.OneNote-tips.com
Author: Guide to counsel for Microsoft Outlook -
I have a second hand on windows vista pc and he olny has 1 connection acount and I have no password or any form of records, how do I access windows in order to set up my own account / / / is no vista, discs or backup disks you not how I can get in using the computer
http://support.Microsoft.com/default.aspx/KB/189126
"Microsoft's strategy concerning lost or forgotten passwords"
Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reinstall Vista:
Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .
There is no Vista free download legal available.
Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.
Normally, they do this for a cost of $ small.
In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.
See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.
Normally, you have to press F10 or F11 at startup to start the recovery process...
Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.
Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.
If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.
Save all data, because it will be lost during a clean installation.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/default.aspx/KB/326246
'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'
See you soon.
Mick Murphy - Microsoft partner
Maybe you are looking for
-
I installed my software for my HP Officejet Pro 8500. I'm having difficulty to get the HP to scan to my computer.
-
Windows 7 sounds decreases between Applications and devices (Dell Vostro 1015)
I'm having a problem where all that sound comes from applications Stoops when he goes to the peripheral output. To illustrate the problem, here is a picture of what's going on. I turned on and turned off all the improvements, changed options of exclu
-
SE charger of HEALTH professionals has stopped working when you try to install a game.
I have a Loader of HEALTH professionals has stopped working while he was trying to install some treasures from the deep by Oberon Games. I searched and found others have had the same problem with this error message. I found help for Vista users, bu
-
Driver management has completed the process to add the HdAudAddService Service
At windows 8, just upgraded to 8.1 windows and sound does not just work. I refreshed the pc, the sound seems to come back but then then after 10 hours, the problem came back use a toshiba satellite pro just 1 year and it is in perfect condition until
-
Question of missing Tablespace
Hi allI was wondering if anyone had any suggestions. I have what seems to be a missing tablespace however the data files that are associated with the storage space are still on my server. When I ask the Oracle database to show all my storage space,