VPN does not connect in some places

Similar Questions

• iPhone 6 does not connect to some wifi routers

  Hi gurus of the Forum.

  I hope someone can help with this weird wifi problem I have on an iPhone 6. The phone is running iOS 9.2.1 (latest version) and I'm in the United Kingdom. The phone has been connected to my home router, which is a Hub of sky and works well, I hung up for 5 minutes and then went back to it and the wifi connection was gone. I tried to reconnect and he would not find the router. I've tried everything to fix the problem but no luck. Now here's the weird thing in the household, we have another iPhone 6 (iOS 9.2.1), a 5 s iPhone (iOS 9.2.1), 2 x iPads, MacBook Air, and all these have no problem of wireless connection to the router (Sky hub) and connect to the internet.

  In my investigations (using neighbor routers, public routers, etc.), I discovered that the phone does not detect blank sky hubs hubs, hubs of Talk Talk, an iPhone 6 set up as a personal hotspot. Wifi looking for networks but not found. However, the phone WILL find and connect to networks and hubs BT so I know that the phone's wifi works perfectly OK.

  To try to solve the problem, I did the following: -.

  1 reset the phone (hold down Home and Power)

  2 reset the router

  3 reset the 'network settings' on the phone.

  4 erased the phone and set up as a new phone (still will not find the router)

  5 restore an old backup.

  6 disabled 'assistance to wifi '.

  7 disabled "wifi network" under the heading Privacy > sites > System Services.

  8A tried to manually enter the SSID and password of the router on the phone.

  9. manually entered the device and wifi MAC address of the router

  10. banged my head against a brick wall - has not helped and I had a sore :-) head

  So in my opinion, I tried everything what can be done to solve this problem, but nothing helped, so I come to the community to beg for help.

  I read something about iOS 9.2.1 having wifi problems, but I will reiterate, the phone was working fine and then stopped without reason. I have also other phones running 9.2.1 with no problems.

  Please help as my head becomes painful overall hit.

  Thank you very much in anticipation

  Steve

  PS please don't waste your time and your mine responds telling me to do the things that I've done - thanks.

  Hello

  Anyone have any ideas? I am all of them.

  Thank you

  Steve

• My Windows 7 VPN does not connect. It is error 800. Help, please!

  Hello. I am trying to connect to my VPN from a new location. It works very well in the past, but when trying to connect now it gives me error 800. I think it may have something to do with the internet connection at home that I am trying to connect from. I have to configure their router or something to allow my VPN to connect?

  The error reads as follows:
  Connecting to remote.camposlaw.net using "WAN Miniport L2TP"...
  Error 800: The remote connection has not been because attempts VPN tunnels failed. The VPN server is maybe inaccessible. If this connection tries to use an L2TP/IPsec tunnel, the required security settings for IPsec negotiation is may not be configured correctly. If you continue to receive error messages, you can enable logging for analysis.
  Thanks in advance for your help.

  Hi KailiChristensen,

  Thanks for posting in the Microsoft Community.

  Since you are facing a problem with the VPN connection, the question you posted would be better suited for the IT Pro TechNet public. I would recommend posting your query in the TechNet Forums to get help:

  Windows 7 networking TechNet Forums

• Satellite C650 does not connect to some sites

  Access the home page and all the sites in the Favorites. When I type in any address in the search box, enter, I get only a blank page. With the help of the Windows 7 operating system.

  Nothing helped, I clicked on "Troubleshooting Windows utility. Any help will be appreciated.

  What browser do you use?
  You have the same problem using different browsers?

• LaserJet P1102W: [RESOLVED] LaserJet P1102W does not connect to a wireless network on Mac

  UPDATE: the below solution worked on my MacBook, both running El Capitan. Ignore the instructions provided in the manual of the P1102W and follow the steps below.

  I have a P1102W printer.

  Recently my LaserJet P1102W refuses to connect to networks using WPA Wireless.

  As it does not have an IP address, I can't access the web server.

  She also does not connect to my Mac Wireless via Bonjour. The printer will install when connected via USB.

  I installed printer HP Apple drivers, that contains the P1100 driver.

  The P1102W worked before wireless. I only noticed this anomaly since installation El Capitan and moving the printer to another room with my workstation.

  I need the printer to use the wireless network, as I did not have enough space on my desk for him. And I just can't place it anywhere within the range of a USB cable.

  Are there alternatives to this?

  Hi @rcosgrove,

  Welcome to the Forums of HP Support!

  I see that you encounter some problems connecting your Laserjet P1102w printer to your network wireless using your Mac computer. I can help you with that.

  First of all, I would like to mention that it would be easier to the printer connected to your network using a Windows PC. If you can't borrow or use a Windows PC, the following steps should allow you to connect the printer. If you can borrow a PC, please let me know what version of Windows and I can provide a link to the drivers to configure the printer automatically.

  Preparation of the printer

  1. Turn the printer off.
  2. While the printer is turned off, hold down the two buttons on top of the printer.
  3. Hold the buttons on top of the printer and the printer.
  4. Hold down the maintained for even 10 seconds.

  Wireless printer setting

  1. Make sure that the printer is connected to your Mac via the USB cable.
  2. Click on your Apple icon, system preferences and printers and Scanners.
  3. Click the icon of your printer on the left.
  4. Click Open print queue, printer installation, utility of printer, open printer and HTML Config utility.
  5. (If the above step generates an error, change your default browser on Safari. Please let me know if you need assistance with that).
  6. In this new window, click on the networking and wireless tab on the left.
  7. Under Mode of Communication, select Infrastructure.
  8. Select your network from the list and then click on the button with the arrows.
  9. Under Security Mode, select WPA/WPA 2. If you have an old router, you may need to select WEP instead.
  10. Enter your password wireless in the field below.
  11. Click on apply.

  Now, wait a few minutes. Your printer must change to have a solid blue light. If it is not the case, either the password has been entered incorrectly or there is a setting on the router that the printer is having a resolution of the issue. Please let me know if this is the case.

  Once you have a solid blue light:

  1. Unplug the USB cable.
  2. Return to the printers and Scanners.
  3. Hold down the CTRL key and click the icon of the printer on the left.
  4. Click on reset printing system.
  5. Click on the button "+" in the lower left corner.
  6. In this window, select your printer in the list.
  7. Click in the box next to and select your printer from the list.
  8. Click on Add.

  Please let me know if you are able of print or the results after following the above. If you can print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope this information is useful. Please reply to this message with the results. Good luck!

• Windows 7 does not connect to the new wifi networks

  I have a problem with connecting to wifi networks. My laptop only connect to wifi networks that I have already connected to in the past but does not connect to all nine. The computer will recognize the but won't give me the possibility to type in any password. For example, I can connect correctly to the House and my moms place as wifi passwords are already saved on my computer. However if I go to a friends house their wifi signal will appear but when I go to connect I will not have to enter a password, the mouse cursor will simply show it to load a few seconds and then nothing happens.

  Can someone help me?

  Hello James,.

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your computer?

  This problem can occur for the following reasons:

  -WEP, WPA or WPA2 key or password security issues.
  -Incorrect network connection settings.
  -Corrupt or incompatible drivers.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooting and check.
  Reference:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, then use method 2.

  Method 2:
  Please use the suggestions contained in this Microsoft support article and check the issue.
  Reference:
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Bluetooth does not connect on iOS 10 and sierra OS

  I just bought an iphone 7, Apple Watch 2 and I updated my computer to sierra yesterday.

  I wanted to do the auto unlock with my watch, but my phone does not connect to the Mac with bluetooth. He wants to connect and the phone is displayed in the bluetooth settings, it says on my phone to pair if the numbers are the same, and then he "fails to connect. so im lost and I can't use my watch.

  I have reset my watch (by unpairing), iphone (by resetting all settings) and rebooted my computer.

  It seems that the "it just works era" is over for apple.

  If misery loves company, I'm here!  Just posted my new iphone 7 + setting BLUETOOTH is not 'discover' one of my devices (in 2015 Lexus and Bose radio/speakers).  In addition my iPad and iPad air are also not 'discover' devices!  I think that this happened once I installed the latest ios 10.0.2 software on all my devices.  Please reply if you receive some 'advice' from someone in the "know"!  Thank you!

• I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  Always recommended to reset the airport back to settings by default and then set up again whenever you have a new modem or change your Internet Service provider.

  Turn off the new modem for at least 30 minutes. More is better.

  Perform a hard reset on the AirPort Extreme, then it turned off.

  Make sure that the Ethernet cable connects the modem to the "O" on the AirPort Extreme WAN port

  After the power of the modem 30 minutes down, turn on the modem and let it run for at least 5 minutes by itself.

  Then, turn on the airport and let it run a few minutes

  Set up AirPort Extreme again

  Important note... There are many reports of problems with the modem Arris SB and airports. Both are great products, but they do seem to work perfectly together for some users.

• Firefox does not connect to any site since the new update to download.

  Firefox does not connect to all websites since the installation of the last update. Google Chrome and Internet work.

  Some problems occurs when your Internet security program was set to trust to the
  a previous version of Firefox, but no longer recognizes your updated as version
  level of confidence. Now how do I solve the problem: to allow Firefox to connect to the Internet
  Once again;

  • Make sure your Internet security software is up-to-date (for example, you are using the latest version)
  • Delete Firefox to list your program of trusted or recognized programs, then add it again. For detailed instructions, see

  Configure the firewall so that Firefox can access the Internet. {web link}

• My macbook pro does not connect to Time Capsule

  My Macbook Pro has not saved for a few weeks and does not connect to the time Machine.

  Whenever I try to connect, I get a message saying check the IP address. Everything else works - i.e. wifi is working, etc. But for some reason any time Capsule of the functions are lost.

  Please can someone help.

  My operating system is OS X Yosemite 10.10.5

• Ink advantage 2545: changed the name of the wireless router and now ink advantage 2545 does not connect and I'm out of ideas

  I have a Toshiba laptop 64 bit running Windows 10 Home, 8 GB, 1 t hard drive.

  Router is a Samsung phone using Android because it was the only router that I could find which would take the wireless signal.

  I live very pastoral, no neighbours for miles, so I never saw the need for a password on my router.

  Now, some people are installs in less than 400 feet from me, and I think they're piggybacking on my Wifi because my access speed has slowed considerably since they moved in.

  So I decided to change the password of the router, unfortunately, I can not put in any password I want.  It gives me the opportunity to have a predefined password.  So I changed the name of the router I could do without problem.

  My computer very quickly without any problem, however, my printer which worked great for a year with the old router name does not connect on the new name of the router.

  Here is what I tried:

  I had hoped he would ask me for a new name / password, but it did not.

  Then I plugged a cable between the printer and the laptop in the hopes that it would produce a different kind of results.  It has not changed anything.  There is no screen menu on what that be like this on the printer.

  I pressed the wireless button that has the flashing blue light and nothing happened.

  I pressed the button, don't know what it is, but it has a white light, and nothing happened.

  I went on the HP site and followed the instructions but he just said do not connect the cable until told to do so.  So I disconnected everything, lights out and turned back on and still no connection and no invite to plug whatever it is.

  Y at - it everywhere where I have being a novice could get instructions on how to get this working?

  I appreciate any help you can give me.  Thank you.

  Hello

  I think you are talking about SSID. Please, think of it as a new router and use the following ways to correct:

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html
  
  Kind regards.

• iPad does not connect to the server

  Kind of, it looks like my iPad has disappeared and twisted his tail (connection) and got lost somewhere in cyberspace.

  Yesterday morning he opens to the screen Hello > Slide Set up who brought up the screen 'could not activate iPad' with the message "your iPad could not be activated because the activation server is not reachable. Try to connect the iPad to iTunes to activate it, or try again in a few minutes. If the problem persists, contact Apple Support at apple.com/support".

  This condition actually began three days when it does not connect to my Airport wireless internet and I could not he deleted.  I made the troubleshooting on the dome using Airport utility that showed connections to the top and the green. My main computer is not affected. I was able to put a return by making a total system power off for a few minutes and then turned on one at a time with the modem (cable) beginning (all equipment - computers, iPad, modem and airport), then the airport, my main computer (2003 iMac screen all-in-one flat) then the dome of the iMac. They are all restored correctly at full speed. At the point where I was interested only in the dome as I was doing some work on it using Classic applications and did not activate the iPad until the most late in the evening.

  I was wondering what is happening and if there is an inexpensive way to get it running again?

  Sparkgapper

  p.s. There is an Apple Store here in El Paso, if it's a long drive where I live.

  If you have problems with the applications of stalling or crashing,

  double click on the "home" button

  -slide up on applications to force leave their

  Re-boot ipad.

  Press on and press and hold the sleep/wake button until a Red slider appears, and then drag the slider. Press and hold the sleep/wake button until the Apple logo appears.

  https://support.Apple.com/en-us/HT201559

  Force power down if above give it trouble you.

  At the same time hold the sleep/wake button and the Home button. Ten seconds or more.  Keep until the Apple logo appears.

  more information on the re-start:

  http://iPad.about.com/od/iPad_Guide/SS/how-to-reboot-your-iPad-power-off.htm

  This these tips from MichelPM to improve performance:

  https://discussions.Apple.com/message/29504169#29504169

  https://discussions.Apple.com/message/29504311#29504311

  Restore factory settings by loading the latest version of the ios that will support your machine:

  (1) make a full backup of your device if necessary.  Is two times better - cloud and computer.

  https://support.Apple.com/en-us/HT203977

  (2) three methods of restoration of your ipad.  [simple as abc]

  2.a) "you can use iTunes to restore your iPhone, iPad or iPod touch to factory settings and the latest version of iOS."

  http://support.Apple.com/kb/HT1414?viewlocale=en_US & local = en_US

  2.b) be a little more insistent: "you can put your device iOS in recovery mode, then restore it via iTunes.:

  http://support.Apple.com/en-us/HT201263

  3.c) as a last resort, you might consider DFU (Device Firmware Update).  This could void your warranty.

  http://www.IMore.com/Tip-put-iPhone-iPad-DFU-mode

• HP Pavilion dv7 - 3188cl: HP Pavilion does not connect to Internet (resolved)

  I recently got a HP Pavillion Entertainment, model number dv7 - 3188cl, for me to use for a class at the school by my uncle. Before the recovery, everything worked perfectly well. My uncle asked me to reset the computer, so we used the recovery disks that wiped the hard drive successfully but then refuses to reinstall the operating system. Instead of getting another set of recovery disks that I've used a Windows 7 install disc to reinstall the OS and he did so successfully with one flaw, the laptop does not connect to the internet.

  I tried to connect via ethernet and it does not find my WiFi network. I suspect his lack a driver and checked for drivers on the HP site but he said that there is none. Any advice would be greatly appreciated, and if there is no driver for this I would be grateful if you could tell me where to download from.

  Thanks in advance.

  Update: after some search Intel had the good driver needed.

  All your Windows 7 drivers (and some) are displayed on your Support page:

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-dv7-3100-entertainment-notebook-PC-series/4074368/model/4150173#Z7_3054ICK0K8UDA0AQC11TA930O2

• Satellite M30-106 - does not connect via radio

  Hello
  hope someone can help im having headache with my Satellite M30-106 problems

  I can connect to the internet via ethernet, but once I delete it does not connect via radio. I am trying to connect to a router broadband Sagem sky but for some reason any he just not going, when I open wireless connections, I can see the projection of router as safe but just cannot connect.

  I would also like to point out I am very new on wireless and to be honest, I don't know what im doing please give me advice in simplistic terms you can so I can be sure I understand where im going wrong

  Regards wayne

  Hello

  If you try to connect to your router, you will ask for a password or what exactly is going on?

  Maybe you should try to update your laptop WLAN driver. You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online downloads support & -online Download Driver

  Also make sure you use the same WiFi standard that you have configured on the router, for example 802.11 g.

  What operating system do you use? Have you installed all service packs and patches?

• Want 4520: Hp Envy 4520 does not connect to the network

  4520 nine will recognize my home network and I put the password correctly, but it does not connect.  Went all out and under tension, but without success. Never had such a problem with other devices. I printed a diagnostic of the printer which suggests some issue with MAC address filtering on my sky router but have never enabled MAC address on my router filtering - a) would not have any idea how he b) have never had this problem with other devices then why now? Help please

  Hello

  Download and run the Installation Wizard of HP printer from the link below to install the printer wireless.

  www.HP.com/go/Tools