VPN in 1921 with the AAS wireless card

Similar Questions

• Inspiron 530 Win XP Home does not start with the TrendNet wireless card

  I just received 5/1 a refurbished Inspiron 530 530 Mini-Tower desktop: Intel Core 2 Quad processor Q6600 (8 MB L2 cache, 2.4 GHz, 1066FSB) Genuine Windows XP Home Edition. The PC didn't have any LAN card and I intend to use a working adapter TrendNet (COMPUSA) 54 Mbps Wireless G PCI I used very well with my old 4300 Dim run also Win XP Home. However, after that I booted up the new PC with the first series, I stopped him. I then opened and installed the card wireless in one of the 2 empty PCI slots. When I turned on the PC, surprise! The PC wouldn't start - it kept beeping with the glowing orange of front power button and turn off every two seconds, I then read the Inspiron 530 manual means that the motherboard has detected an error. Hello. I checked.

  I searched other posts in this forum and I've seen a few references to the boot configuration verification. However, installation of starting my PC doesn't have an option related to the wireless adapter.

  Someone help me please fix this error. I intend to reconnect the card on my old PC wireless again and start just to prove that the card is always good. I only removed a card video of him and the rest of the asis. (I've not carpet in my house is that reduces my chances to have fried the card when you remove or install.) I also touch the chassis of the PC before doing anything.)

  
  

• HP Mini 110-4112ea with the atheros wireless card will not connect to internet

  I just bought the above and tries to connect to the internet via my router netgear wndr3700 but cannot make it work. network is the following: Mini 110--->---> Virgin (netgear) supplied wndr3700 router modem (also wireless)---> internet

  Although it shows as having internet in network & sharing Center it just connects and applications like Skype and Norton does not connect. When I give the wndr3700 with ethernet cable that works very well. Also if I join WiFi on a blank area, that's OK. I just want the Mini 110 to attach the wndr3700 wireless and give access to the internet as it should and other PC at home do. I installed the latest drivers from the HP (sp54972 - version 9.2.0.444) site but nothing helped. Help, please!

  Right - I myself solved by finding the relevant info on the Netgear forum. This article describes change some settings on the Netgear router. For the benefit of someone else knows the same or similar problem and for the technical gurus at HP, that's what I did:

  Activate these settings in the configuration of the QoS.

  Activate -WMM (Wi-Fi Multimedia) parameters (b/g/n 2.4 GHz) (box)
  Activate -WMM (Wi-Fi Multimedia) parameters (5 GHz a/d) (box)

  (in my case I need not turn on WMM for the 5 GHz band, but just in case I need it in the future I did anyway...)

  Don't ask why it works or what it means: it works!

• Tecra 9100 cann't find the internal wireless card

  I have Tecra 9100. Recently he started to act strange. Sometimes (rarely), it cannot find its internal wireless card or / and hang (freeze). When I check the device manager card is simply not there. After the reboot, the map pops up sometimes, but not for long.
  I checked the event viewer, but the only Error Message is:
  Source: Service Control Manager
  Event ID: 7000
  Description: The OrangeWire USB enhanced host controller service could not start because of the following error: the specified driver is invalid.

  2 USB ports are working perfect. What is the link between that message and the internal wireless card?
  Any ideas how to fix? I'm with Windows XP SP2.
  Thank you.

  I put t think the WiFi problem could be related to the USB enhanced host controller service. I don t see a consistency

  You can try several steps; first try to install the latest driver WLan.
  Access card WLan (device-> Properties Manager) properties, and then clear the option to save energy.
  Additionally, you will find different option in the Advanced tab.
  I can t Advisor was 100% what options need to be changed because each wireless network card supports different function.

  Whatever the case the advice above will not help not I think there could be something wrong with the OS files or registry keys.
  In this case, it would be very interesting to know if the installation of clean operating system might help.

• HP15 portable g019wm - cannot get the internal wireless card installed

  Like many other Windows 8.1 users, I don't like the operating system.  I tried to go back to windows 7 64 bit.  So far, I have everything works except the internal wireless card.  I downloaded and installed several of the drivers wireless youall suggested in similar issues of forum, but all without success.  Can you help me?  Also is there a way to locate all models and manufacturers of the equipment in my laptop?  This is so that I could keep the laptop updated with the latest drivers.

  FYI: for now, I'm running with TPLINK wireless and that the seller has provided dongle.

  PRODUCT: F9H60UA

  MODEL: 15-G019WM

  What is the brand and model of the card wireless installed?

  I will move this thread to the secction of laptop for you.

• Could someone tell me that I have a laptop that is compatible with the adapter wireless Athreos in it and it catches an unsecured, network shown as next (automatic) for the SSID (network name). Please tell me how to connect...

  Could someone tell me that I have a laptop that is compatible with the adapter wireless Athreos in it and it catches an unsecured, network shown as next (automatic) for the SSID (network name). I tried parameter as point of access, AD-hoc, Connect automatticaly etc but will not connect... Please tell me how to connect...

  Hi Sumit and thanks for posting.

  Your Athreos has never connected? If it has connected then it not only connects it to insecure networks? Also after can trying to connect you do the following?

  Start, run, CMD, OK to open a command prompt:

  Type the following command:

  IPCONFIG/ALL

  [Note that there is no space between the oblique and ALL bar].

  Right click in the command window and choose Select all, and then press ENTER.
  Paste the results in a message here.

  I hope this helps. After the back if you have any questions.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Problem with the Logitech Wireless Speaker Adapter

  Hello

  It's been days trying to get my computer, a Dell Inspiron 1721 on Vista, working with the Logitech Wireless Speaker Adapter. There are no instructions to come with the adapter because it was said to be very easy to use, that well is not for me...

  The adapter works via Bluetooth. I can connect to it, but then it doesn't work simply. The adapter is supposed to get a green light when it is synchronized with the computer, but he gets only a flashing green, then turns off. The adapter works as I have tried with a smartphone and it was so easy to do.

  Apparently something to do with A2DP, which does not have Vista. (I'm not an expert, I just repeat what I read on the forums...). If Yes, where can I find?

  Any help is welcome because I am completely lost on this one.

  Thanks adavance

  chikito11n

  There is no instructions to come with the adapter

  You can find the instructions on the Logitech support page. On the left side of this page is a link to the Getting Started Guide pdf which is the instructions.

  chikito11n

  I can connect to it, but then it doesn't work simply. The adapter is supposed to get a green light when it is synchronized with the computer, but he gets only a flashing green, then turns off.

  The flashing green light means it tries to connect and pair, so it can not connect, or it can be connected, but not being able to pair.

  First of all, make sure your laptop is equipped with a bluetooth adapter.

  Then, make sure you have the latest bluetooth driver. Go to the Inspiron 1721 downloads page. In the drop-down list, select Vista. Expand the network category. Find your bluetooth adapter driver and install it if it is newer than your current driver. (These drivers are from 2007, then you probably already have the most recent).

  As the Getting Started Guide Logitech says "refer to the documentation that came with your device for pairing instructions. Dell does not provide these instructions, but they are available on the Microsoft website. However, page this guy has the instructions and screenshots and it is easier to follow than Microsoft. It also explains how to determine whether or not you have a bluetooth adapter and how to configure it to connect to a bluetooth device, then explains how pair or sync in Vista.

  Note that if you enter an access code in the Bluetooth Setup Wizard, the Getting Started Guide says to enter 0000.

• Cannot download creative cloud because I'm in the Kenya, even though I am an American with the American credit card and the address of the credit card.

  Cannot download creative cloud because I'm in the Kenya, even though I am an American with the American credit card and the address of the credit card. I changed my region on my Adobe back account in the United States, but it won't let me download it.

  I think that the Downloader checks your IP to be sure that you are, where you say you are... so your account is based in the United States will not work for a purchase, since you are not actually in the United States

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• There is a problem with the information of card entered here. Please enter another card or contact your bank. Can Hoqw I solve this guy?

  There is a problem with the information of card entered here. Please enter another card or contact your bank. Can Hoqw I solve this guy?

  Hello

  Please contact support: -.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Hope this helps!

• Can we pay two or more subscriptions of Adobe CC with the same credit card?

  Hello

  my brother and I are at the school, and both of us are interested in having all the Adobe software (in the creative cloud). I know we have the ability to install the software on two computers with one subscription, but the problem is, we can run those at the same time. So, the only option is to buy two subscriptions of Adobe. My question is, if my mother pay subscriptions, is it possible for her to pay the two of them with the same credit card, students of price?

  Thank you

  SCI

  Hello Tommy.

  Yes you can use the same credit card to buy a subscription on a second account.

  Concerning

  Bianka Attre

• router in 1921 with the double nat ADSL problem

  I have problems with the implementation of a router in 1921 with double lines ADSL for failover. For some reason any internet traffic keeps using Dialer 1 as internet main connection, while 2 Dialer should be primary. Also, when I finish my NAT with allowed a full acl, it translates the public ip address of the 2-to-1 Dialer the Dialer before she sends in the internet.

  This is my config:

  !
  interface GigabitEthernet0/0
  Voice netwerk description
  IP 192.168.77.254 255.255.255.0
  IP helper 192.168.177.1
  IP helper 192.168.177.254
  IP nat inside
  IP virtual-reassembly in
  IP tcp adjust-mss 1400
  automatic duplex
  automatic speed
  !
  interface GigabitEthernet0/1
  Inside the interface description
  IP 192.168.177.254 255.255.255.0
  IP mtu 1492
  IP nat inside
  IP virtual-reassembly in
  IP tcp adjust-mss 1400
  automatic duplex
  automatic speed
  !
  ATM0/0/0 interface
  Description 1/10 Mb Tele2 ADSL
  no ip address
  No atm ilmi-keepalive
  PVC 0/35
  aal5mux encapsulation ppp Dialer
  Dialer pool-member 1
  !
  !
  interface Ethernet0/0/0
  no ip address
  Shutdown
  !
  ATM0/1/0 interface
  no ip address
  No atm ilmi-keepalive
  !
  interface Ethernet0/1/0
  VDSL 5/50 Mb KPN description
  no ip address
  !
  interface Ethernet0/1/0.6
  KPN VDSL description
  encapsulation dot1Q 6
  PPPoE enable global group
  PPPoE-client dial-pool-number 2
  service-policy output parent policy
  !
  interface Dialer1
  Tele2 ADSL description
  the negotiated IP address
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  IP mtu 1492
  NAT outside IP
  IP virtual-reassembly in
  encapsulation ppp
  IP tcp adjust-mss 1400
  Dialer pool 1
  Authentication callin PPP chap Protocol
  PPP pap sent-username *.
  No cdp enable
  card crypto SAL_map
  !
  interface Dialer2
  VDSL KPN description
  the negotiated IP address
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  IP mtu 1492
  NAT outside IP
  IP virtual-reassembly in
  encapsulation ppp
  IP tcp adjust-mss 1400
  load-interval 30
  Dialer pool 2
  PPP authentication pap callin
  PPP pap sent-username *.
  No cdp enable
  card crypto SAL_map_VDSL

  !

  IP nat inside source overload map route sheep interface Dialer1
  IP nat inside source overload map route nonat2 interface Dialer2
  IP route 0.0.0.0 0.0.0.0 Dialer2 Track1
  IP route 0.0.0.0 0.0.0.0 Dialer1 254
  !

  auto discovering IP sla
  ALS IP 10
  echo ICMP - 62.69.174.75 source-interface Dialer2
  Timeout 30000
  frequency 30
  Annex IP SLA 10 life never start-time now
  !

  access-list 102 deny ip 192.168.177.0 0.0.0.255 host 192.168.1.249
  access-list 102 deny ip 192.168.178.0 0.0.0.255 host 192.168.1.249
  access-list 102 deny ip 192.168.179.0 0.0.0.255 host 192.168.1.249
  access-list 102 deny ip 192.168.177.0 0.0.0.255 172.28.1.0 0.0.0.255
  access-list 102 deny ip any 192.168.255.0 0.0.0.255
  access-list 102 deny ip any 192.168.254.0 0.0.0.255
  access-list 102 deny ip 192.168.177.0 0.0.0.255 192.168.179.0 0.0.0.255
  access-list 102 deny ip 192.168.177.0 0.0.0.255 192.168.178.0 0.0.0.255
  access-list 102 deny ip 192.168.177.0 0.0.0.255 192.168.79.0 0.0.0.255
  access-list 102 deny ip 192.168.177.0 0.0.0.255 192.168.78.0 0.0.0.255
  access-list 102 deny ip 192.168.77.0 0.0.0.255 192.168.179.0 0.0.0.255
  access-list 102 deny ip 192.168.77.0 0.0.0.255 192.168.178.0 0.0.0.255
  access-list 102 deny ip 192.168.77.0 0.0.0.255 192.168.79.0 0.0.0.255
  access-list 102 deny ip 192.168.77.0 0.0.0.255 192.168.78.0 0.0.0.255
  access-list 102 permit ip 192.168.177.0 0.0.0.255 any
  access-list 102 permit ip 192.168.77.0 0.0.0.255 any
  !

  Dialer-list 1 ip protocol allow
  Dialer-list 2 ip protocol allow
  !
  nonat2 allowed 10 route map
  corresponds to the IP 102
  Set the interface Dialer2
  !
  sheep allowed 10 route map
  corresponds to the IP 102
  Set the interface Dialer1

  the ACL is built to exclude some ips private for ipsec VPN destinations.

  Any suggestions on what I'm missing? It must use dialer 2 as primary internet connection and failover of Dialer 1 if IP SLA fails. The SLA config seems to work properly:

  SH ip route

  S * 0.0.0.0/0 is directly connected, Dialer2
  84.0.0.0/32 is divided into subnets, subnets 1
  C 84.246.25.231 is directly connected, Dialer1
  145.131.0.0/32 is divided into subnets, subnets 1
  C 145.131.131.112 is directly connected, Dialer2
  192.168.77.0/24 is variably divided into subnets, 2 subnets, 2 masks
  C 192.168.77.0/24 is directly connected, GigabitEthernet0/0
  The 192.168.77.254/32 is directly connected, GigabitEthernet0/0
  192.168.177.0/24 is variably divided into subnets, 2 subnets, 2 masks
  C 192.168.177.0/24 is directly connected, GigabitEthernet0/1
  The 192.168.177.254/32 is directly connected, GigabitEthernet0/1
  192.168.254.0/24 is variably divided into subnets, 2 subnets, 2 masks
  S 192.168.254.0/24 is directly connected, Dialer2
  192.168.254.37/32 S [1/0] via 77.241.229.241
  S 192.168.255.0/24 is directly connected, Dialer1
  212.121.121.0/32 is divided into subnets, subnets 1
  C 212.121.121.183 is directly connected, Dialer2
  213.144.228.0/32 is divided into subnets, subnets 1
  C 213.144.228.72 is directly connected, Dialer1

  http://docwiki.Cisco.com/wiki/category:NAT

  Above document indicates "Beware of the use of the ACL for the NAT with" ip allow a whole ' you can get unpredictable results. " I suggest using the "road-map sheep/nonat2 permit 20" instead of "allow a whole."

  For others, change the config as follows-

  !

  ALS IP 10
  Dialer2 interface source ICMP echo 8.8.8.8
  Timeout 30000
  frequency 30
  Annex IP SLA 10 life never start-time now

  !

  IP route 8.8.8.8 255.255.255.255 permanent dialer2

  !

  !
  nonat2 allowed 10 route map
  corresponds to the IP 102
  match interface Dialer2
  !
  sheep allowed 10 route map
  corresponds to the IP 102
  match interface Dialer1

  !

  IP nat inside source overload map route sheep interface Dialer1
  IP nat inside source overload map route nonat2 interface Dialer2

  !

  NAT-TRACK event manager applet

  track event 1 show all

  order cli action 0.1 'enable '.

  action 0.2 wait 2

  action command 0.3 cli "clear ip nat translations forced."

  action 0.4 syslog msg "Translation NAT cleared after state change of track"

  !

  -Ginette

• Need help finding the right wireless card

  Hello

  I'm trying to find out what wireless network card should I buy for my laptop computer backup HP Pavilion dv4000 (dv4253EA) can someone help with this?

  Hello:

  Your model came with the wireless network card.

  Is there a place to install a wireless card?

  Are there already the antennas in the compartment?

  If this isn't the case, you will need to purchase an external wireless adapter.

  Please see the service manual in Chapter 5 for the location where the wireless card is going.

  http://h10032.www1.HP.com/CTG/manual/c00553278.PDF

  There is also a list of the supported WLAN cards with HP numbers.

  None of them are available for sale to HP, then your best bet is to buy used on eBay.

  Questioned by the HP part only number.

  Only one of the listed cards will work and they also have the HP piece on them or they will not work.

• Satellite A110 - switch WiFi does not work with the new WiFi card

  Hello everyone

  I have a problem with my laptop Toshiba Satellite A110 - 178 (PSAB0E). I replaced the original Intel 3945abg with Intel Link 5100 WIFI card and on the new wifi hardware wifi card switch does not work.

  New wifi card is discovered and drivers to the correct job but when I try to search with the Intel Pro/Wireless software wifi networks I message to turn on hardware switch, but there light and not work. The old wifi card swich works OK - orange light is on. On the new map light is off and swich does not work.

  Help, please

  Hello

  Do you have also enabled the WLAN functionality by pressing FN + F8?
  Check it!

  In addition, I think the case is clear: the new wireless LAN card isn't compatible with Satellite A110.
  So in my opinion, you must use remove the new card Intel and install the old card that works fine in your laptop.

• Satellite L650 - 1 M 0: could not activate the new wireless card

  Hello

  I replaced the wireless card in the laptop on WiFi + BT (Combo). New brand of laptop do not had favor of BT
  Bluetooth and WiFi work correctly on the system drivers that the system itself.

  The only problem with the new adapter is unable to activate or disable the network modules.
  Since my laptop does not support default BT will automatically turn off the controller module.

  WiFi must be turned off and as in the previous card - a function key. Unfortunately, wireless in the function bar option has disappeared, and the FN + F8 key combination does nothing. Responsible for the light WiFi is on all the time.

  It is possible to activate the WiFi module as before?
  Very please help!

  Laptop: TOSHIBA L650 1 M 0
  The new network adapter: BCM94313HMGB

  Sorry for my bad English.
  I used the Google Translator because I can't speak English. Only the Polish language ;)

  > Is it possible to activate the WiFi module as before?

  You have replaced the WLan module, which means that the hardware configuration has been changed. This means that the different module has affected the functionality of the software.

  The new WLan/BT BCM94313HMGB combo card seems to be designed by Broadcom.
  Of my knowledge that supports most of the laptops Toshiba Intel / modules Realtek or Atheros. This is why I think there may be a compatibility problem between the FN key software and this module.

  Maybe you can try to install the Broadcom driver once more to check if this can help, if not you will have to renounce that.

• Replace wireless card "g" with a "n" wireless card.

  My Acer Aspire 5610z model BL50, has a 'g' wireless mini card, I want to replace it with an "n" mini wireless card.  No one knows what "n" mini card wireless are compatible with this system? Does anyone do this?  If so, what replacement card did you use?  And were satisfactory results?

  Thanks in advance.  Any help will be greatly appreciated.

  Hello

  Below is the original mini card for Aspire 5610:

  HE KDN01.001

  BD OF LAN. WRLS.4965AGN.SAUDI