VPN RVS4000 And Mac

Similar Questions

• Need help with native VPN client for Mac to the Configuration of the VPN router RV082

  Guys,

  I am trying to set up router RV082 VPN Client with native Mac for my remote access. However, no matter what I did, I'm not able to make works. Can any give me an example of how to set my router RV082 and Mac Book Pro (Mountain Lion)?

  Thank you

  Hi Jixian, the native client MAC does not work. The IPSEC VPN client is the same as the 5.x Cisco VPN client is not supported on this device.

  Your alternatives are to use PPTP or a 3rd party IPsec client such as ipsecuritas.

  -Tom
  Please evaluate the useful messages

• Question of WRV210 VPN RVS4000

  Hello all,.

  I have a client configuration with a WRV210 VPN router wireless home internet (cox cable) and a VPN RVS4000 router at his office (comcast cable internet).

  VPN has been in service for about 6 months, with the occasional drop-outs requiring a reboot of the two endpoints to re-establish the VPN.

  The WRV210 home recently 'died', requiring a replacement. The client is the swap itself and called for assistance to small businesses (?) where they walked him through the router configuration.  Since this morning when I checked, the VPN is connected, but I can't ping between the internal interface on the DESKTOP to the internal interface on the HOUSE.

  I'm deleting the entry IPSEC on the RVS4000 (apparently no option to remove an entry on the WRV210!) and the deactivation/creation of new entry on the WRV210.

  Any thoughts out there on how to make this diagnosis?

  Kind regards

  John Knapp

  Cisco SMB Select

  Hello

  I would watch your setting on the tunnel, you can check the LAN IP local and remote do they read X.X.X.0

  I would like to know if it is the problem, if it is not remembered the HWC to solve the problem

• 8.3 (1) ASA Cisco VPN Client and IP Communicator - one-way communication

  Community salvation.

  I have a strange problem with my setup and I'm sure it's either some type of routing (or NAT) or just missing one rule allows traffic. But I'm now at a point where I would like to ask your help.

  I have a few users remote access that have the Cisco IP Communicator (CICC) application installed on their laptops. So:

  The VPN with CPIC user <> ASA Firewall <> router voice <> MAC <> IP phone

  The VPN works fine for all other traffic. The connection of basis for the IP Communicator works well. He get is connected to the CallManager, is shown as registered and you can even call an internal phone and also external phones. BUT: while you can hear the called party (if the phone internal) it does not work for the other direction. There is no sound from the remote/appellant.

  I already understood that it is also not possible to ping from the phone VPN to the internal subnet IP phone. While the VPN user can ping any other device in the network internal, he cannot do for Cisco IP phones. But if the VPN phone calls a phone no-internal (mobile...) - it works!

  My thought is that the call cannot be build up properly between the VPN phone and the internal phone.

  I found similar situations with google, but they are all for the reverse: call for internal works, but not for VPN.

  What do you think?

  Hello

  Usually ASA lists specific to the customer networks VPN Split Tunnel runs.

  This would mean that there is a Split Tunnel ACL used in configurations of the SAA for this VPN connection that needs to have the missing network added to the VPN connection traffic.

  -Jouni

• (Cisco IPSec) VPN on a Mac 1.6.6 where to start?

  Hello

  Has anyone of you be able to connect to a MAC BOOK pro with the build in VPN (IPsec Cisco's)?

  Recently, I learned a little about the VPN connection and in the end, I was able to make a tunnel between my 2 routers of training C2611XM, but now, I would like to connect my computer from outside the House of my HAND CISCO 1841 ROUTER via a VPN tunnel.

  Here below the SW and HW I have in the CISCO 1841:

  NOTE: 1 Module of virtual private network (VPN), I think it's really VIRTUAL, the slot to put a VPN is always empty!

  ANY SCRIPT or LINK TO is welcome

  ROUTER1841 material #sh

  Cisco IOS Software, 1841 (C1841-ADVSECURITYK9-M), Version 12.4 (24) T1, VERSION of the SOFTWARE (fc3)

  Technical support: http://www.cisco.com/techsupport

  Copyright (c) 1986-2009 by Cisco Systems, Inc.

  Updated Saturday 19 June 09 14:00 by prod_rel_team

  
  

  ROM: System Bootstrap, Version 12.4 (13r) T, RELEASE SOFTWARE (fc1)

  
  

  ROUTER1841 availability is 11 hours, 38 minutes

  System to regain the power ROM

  System image file is "flash: c1841-advsecurityk9 - mz.124 - 24.T1.bin".

  
  

  
  

  This product contains cryptographic features and is under the United States

  States and local laws governing the import, export, transfer and

  use. Delivery of Cisco cryptographic products does not imply

  third party approval to import, export, distribute or use encryption.

  Importers, exporters, distributors and users are responsible for

  compliance with U.S. laws and local countries. By using this product you

  agree to comply with the regulations and laws in force. If you are unable

  to satisfy the United States and local laws, return the product.

  
  

  A summary of U.S. laws governing Cisco cryptographic products to:

  http://www.Cisco.com/WWL/export/crypto/tool/stqrg.html

           

  If you need assistance please contact us by mail at

  [email protected] / * /.

           

  Cisco 1841 (revision 7.0) with 355328 K/K 37888 bytes of memory.

  Card processor ID FHK1314219J

  6 FastEthernet interfaces

  1 module of virtual private network (VPN)

  Configuration of DRAM is 64 bits wide with disabled parity.

  191K bytes of NVRAM memory.

  990360K bytes of ATA CompactFlash (read/write)

           

  Configuration register is 0 x 3922

  Best regards

  Didier

  You can follow the following guide to configure the router to access remote vpn:

  http://www.Cisco.com/en/us/products/sw/secursw/ps2308/products_configuration_example09186a00801c4246.shtml

  Also, this is the guide of installation and configuration of the vpn client

  http://www.Cisco.com/en/us/products/sw/secursw/ps2308/products_configuration_example09186a00801c4246.shtml

• Comments Win XP cannot connect to the network when Cisco VPN works on Mac

  Guest OS (Win XP) on the merger connects to the network, no problem. However, when I start a Cisco VPN on my Mac (not in the guest operating system) and then start Fusion/guest OS, the guest cannot connect to the network.

  I was able to use this configuration for a year on an old MacBook Pro (unibody). Last month, I got a new MacBook Pro and flying over my virtual machine image. I don't check for a few weeks. I'm sure I fly over the image correctly because everything else seems OK or if the IT guys doing something to block my traffic over the VPN.

  Config

  -Fusion - Version 3.1.0 (261 058)

  -Mac - 10.6.4

  So far, I have tried the following

  -started to merge and XP without VPN on Mac - OK (bridge autodetect)

  -launched VPN to work, and then launched Fusion - no network

  -tried ipconfig/release, ipconfig / renew - not always no network

  -tried NAT - do always no network

  Thanks in advance. For any help or suggestion will be greatly appreciated.

  Bernie

  The NAT value and then restart the virtual machine.  Works for me with the VPN client built into a cisco router.

  Do not work the real on 10.6.4 cisco software unless you really need to.

• problem with windows 2003 vpn servers. and xp pro clients vpn using bridge nic

  I have installed 2 guests windows 2003 on 2 laptops. both are configured with 1 CC of backend and frontend 1 nat/vpn server that has 2 interfaces, a bridge and one configured for host only.

  I configure nat on both servers windows 2003 rras and vpn services and have them connected to my local network. they are able to access internet, ping between them and other computers on the network, as well as the host systems on which they run.

  the problem is that I am not able to connect to the vpn servers remotely from inside a guest virtual machine. I wanted to try a vpn site-to site between the guests 2 windows 2003, but the operation failed.

  I then tested customer to type of a guest virtual computer pro xp vpn server. It is also a failure.

  but I discovered that if I initiate a VPN from any one of the host computer system laptop or another computer on the physical network I am able to connect to the vpn servers I have set up.

  I wish I could have these laptops to operate normally and

  time to time be able to turn on virtual machines with vpn

  servers and test as dfs things and replication active directory as if

  they were running 2 separate real-world offices. the two laptops have invited Setup for 192.168.0.0 networks with subnet mask 255.255.255.192. each host that it supposed to be running a 1 subnet for the popular virtual machine with the servers vpn/nat connect together the 2 sites.

  laptop computers are running xp pro and vista ultimate as the host systems. I'm only using the windows firewall but also tested with them disabled vpn connections. also launches the service ipsec on laptops to secure internal lan traffic, I have also tested with two guests with disabled ipsec.

  is there something I'm missing here with the installation of the vmware bridge network?

  Oh I forgot to mention, I test using pptp and ms-chap v2

  I managed to do work by unchecking the tcp/ip settings and the microsoft file sharing on the bridged NIC resaeau.

  now it works very well but who explain to me why it cannot work when you are using the same network as the host card. they all have two different ip addresses and mac addresses. but something seems to be in conflict

• Get pop-up windows from: Advanced cleaner Mac and Mac Adware Cleaner. Are they those recommended by Apple? These come from Apple?

  I have an Imac8, using OS X el capitan, 24 ", realized in 2008. Get pop-up windows from: Advanced cleaner Mac and Mac Adware Cleaner. Are they those recommended by Apple? These come from Apple?

  No, they are not, they are horrific scams and are not in any way recommended by Apple - what made you think they were?

  Frequent jump - rises as it says have adware - try to do a scan with Malwarebytes: http://malwarebytes.org/antimalware/mac.

• iMessage on iPhone, iPad and Mac Mini issues

  So, here's a nice.

  Mac Mini, iPad Mini, iPhone5. All are on the latest versions of the OS. Connected to the identical services iCloud and iTunes on all three devices. The iPhone 5 is delivered to US, the others are the European Union (NL) issued.

  When I send an iMessage on the phone, the message sent is not the Mac Mini or Mini iPad. sent iMessages to iPad or Mac appear on both devices, but not on the phone.

  Incoming messages only appear on the phone, not on the other two aircraft.

  People receiving my messages of either the Mac Mini - combo of the iPad and the iPhone5, have two separate conversations in their messages, but an entry from me in their list of contacts.

  In iCloud online, all devices can be considered to be connected with the same account. All have been disconnected from iCloud, password has been changed and reconnected. All devices were restarted. All to nothing does not.

  Other services such as calendar function without any problem at all, an appointment has been made on what devices instantly extends to the two other devices. New contacts are shared between all the devices too. If the problem is limited to the iMessage.

  In short, I suspect there is a difference between EU and devices of the American unit, preventing them to be treated equally. Does anyone else have this problem or something similar?

  Post edited by: mackert

  Hello mackert,.

  Thank you for using communities Support from Apple. I know that Messages does not properly or sync with your devices is not what you expect. Based on what you said, it seems that you encounter some problems of synchronization with connected devices to your Apple for message ID. Good news is I had this problem myself and I solved this problem by following these steps:

  1. Firstly, you disconnect from your Apple ID for iMessage on all your devices. On your iOS devices, go to settings > Messages > Send and receive and sign for your Apple ID. Then go to settings > Messages and turn off of iMessage.

  2. on your Mac Mini, open messages, then go to the Messages menu > Preferences > accounts. Click your iMessage account in the left sidebar, and then click Sign Out and then sign out again.

  3. restart your devices as closing down and starting process is important to keep the software works correctly:

  Restart your iPhone, iPad or iPod touch

  How to turn on or off your Mac

  4. now sign in iMessage on your iPhone first. Go to settings > Messages, turn on iMessage and connect you to your Apple ID in settings > Messages > Send and receive. Make sure that you are successfully connected, iMessage is activated, and you see your phone number and e-mail available for both "you are reachable by iMessage to ' and"Start new conversations." That's because iMessage uses your iPhone SMS to activate iMessage on your Apple ID.

  If you get an error when you try to activate FaceTime or iMessage

  5. Once your iPhone has configuration iMessage, then sign into your other accounts and check the synchronization of Messages. You can also turn on "Text Message Forwarding" under settings > Messages on your iPhone to better ensure that all devices have the same messages.

  Use Messages with your iPhone, iPad or iPod touch

  Messages (El Capitan): Set up Messages

  Continuity of use to connect your iPhone, iPad, iPod touch and Mac

  See you soon!

• iTunes library to external hard drive works on pc and mac

  Hello world

  I have 1 pc and mac 2. I also use the music library to icloud. However, it depends on the internet connection.

  so, I was wondering if I can put the "itunes library" file on each laptop, the "itunes media" while on the external hard drive?

  My idea is to use an external hard drive whenever I want to use the laptop. so I don't need to broadcast through library icloud music. Moreover, I need an external hard drive and itunes library to work on pc and mac.

  Cheers!

  See make a library of portable split. You will need either a for OS X NTFS driver or driver for HFS + for Windows in order to use the drive with an operating system. Also note that there is a delay when you first launch after passage of one BONE to the other.

  TT2

• Parachute does not not between iOS and Mac devices... Does anyone have a good solution for it nor a lot of garbage to support

  Parachute does not not between iOS and Mac devices... Does anyone have a good solution for it nor a lot of garbage to support

  You want the solution? Why not tell us what Mac and Apple, mobile devices you have the OS and version?

  Also what troubleshooting steps you took?

  We do not have a crystal ball, and we're not sitting next to you.

• HD Share between Windows and Mac

  Hello

  I have a pc configured with windows (Vista) and I shared one of the hard drives.

  My mac see allows me to connect and view records and this PC. I checked and I (Get Info) have read and write permission.

  I turned on, on mac and pc file sharing and also enabled for SMB Options I think.

  Whenever I'm going to delete or copy a file to the shared drive it States "you do not have permissions to complete this operation"?

  I treasure this set up and it worked fine. (I wiped the windows and mac PC as cost installs).

  Any idea why this is not play ball?

  Thank you.

  Post edited by: DjTimmyM

  Stupid me, side windows, permissions were set to read-only. (What a numpty)

• How can I remove photos in an album that has been shared with me on my iPhone and Mac without unsubscribing to the album?

  How can I delete pictures on my iPhone 6 s and Mac Pro from an album shared with me without unsubscring to the album?

  Whence the Album? This would help to diagnose. Normally, on film, you select the photos you want, remove them and the album goes.

  If the Album has been synchronized from your computer using iTunes, then make a new synchronization without the selected album.

• Do you need to be on the same account of WiFi for phone and Mac that allows you to delete photos?

  When my Macbook Pro is on the WiFi and my iPhone 6 s + is on cell phone, I noticed that if I delete the photos within the program of Photos on my Mac they do not get deleted from my iPhone. However, a few hours later when I get home and check my phone, and I'm on Wifi for both devices, the photos have disappeared. Do you need to be on the same account of WiFi for phone and Mac that allows you to delete photos?

  Thank you.

  Devices can be on different wifi networks.

  Your question is that the phone will not be synchronized using cellular data and will wait until it connects to a wifi network, but this can be any wifi network.

• Safari on iPhone and Mac

  Hello

  I was using safari days without any problem.

  But the sins a few hours ago, I'm unable to use it. Whenever I write something on the search bar the application crash. The same happens on my iMac 2009 with the latest operating system.

  is really strange happens in both iPhone and Mac.

  I restart my internet, I delete Google app, also unmaked the search engine on the safari app to see if it works but nothing.

  IM using chrome for now and it works very well.

  some ideas?

  "The same thing happens on my iMac 2009 with the last operating system"

  
  

  Your iMac running exactly what OS?

  Click on your Apple  top left of your screen. In the drop-down menu, click on: about this Mac

  What version do you see?