VPN site-to-site remote access

Hello

I would like to know if the tunnel VPN IPSEC Site to site can coexist with a VPN tunnel to remote access on one device of PIX 515E

Thank you

Madan failed

Yes.

http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00800948b8.shtml

Tags: Cisco Security

Similar Questions

How to configure VPN 3000 Concentrator for remote access

I have inherited a VPN concentrator and want to configure it to provide remote access to my internal laboratory network when I'm traveling. Private interface is configured as 192.168.1.240/24. Public interface is configured as one of my public IP addresses. I have a public IP pool on the back side of a cable modem Roadrunner. I created a pool of addresses for clients such as 192.168.1.200 by 192.168.1.205. I created all group configurations, group and user base.

In the IP Routing tab, I see a default route pointing to my IP address of public gateway - the IP address of my box of roadrunner cable modem gateway.

Since my VPN client, I am able to connect to the VPN concentrator. I get an address from the pool and check the details of the tunnel under the statistics section shows IP address correct pool for the customer and the correct public IP address of my VPN reorga

Jeff,

According to statistics, it seems that the client sends traffic to the hub, but his answer not get back.

We need check the hub settings itself.

I need check the hub settings and that it is a GUI based device so I can't even ask to see the technology and the only option available is to WebEx.

You're ok with webex, pls lemme session comfortable time id and e-mail to send the invitation, it takes no more time and we will carry it out

Thank you

Ankur

VPN site to Site one-way traffic

Hi all

I set up a Vpn site-to site and everything works well in the remote site to the corporate site, but since the site of the company asa 5510, I can't access to the remote site asa 5505. I checked the logging on the SAA and I can see the packets being fallen but I can't find what I need to do to allow this traffic through. Here are most of my 5510 config, I'm sure it's something simple I'm missing, but I can't run it please help.

REMOTE network is 192.168.72.0

: Saved

: Written by enable_15 at 10:29:17.163 GMT/BDT Thu Jun 10 2010

!

ASA Version 8.0 (5)

!

host name Casa

uk domain name

activate the encrypted password of VgZT0UwPdkSV9l7N

zlo5ImUVRkHl4lcl encrypted passwd

names of

name 192.168.103.14 description of Appliance CITRIX CITRIX Appliance

name 192.168.3.12 description villages villages

DNS-guard

!

interface Ethernet0/0

nameif outside

security-level 0

IP address x.x.x.123 255.255.255.224

!

interface Ethernet0/1

nameif inside

security-level 100

192.168.3.254 IP address 255.255.255.0

!

interface Ethernet0/2

nameif dmz

security-level 50

IP 192.168.103.254 255.255.255.0

!

interface Ethernet0/3

Shutdown

No nameif

no level of security

no ip address

!

interface Management0/0

nameif management

security-level 100

IP 192.168.1.1 255.255.255.0

management only

!

boot system Disk0: / asa805 - k8.bin

boot system Disk0: / asa707 - k8.bin

passive FTP mode

clock timezone GMT/UTC 0

summer time clock GMT/BDT recurring last Sun Mar 01:00 last Sun Oct 02:00

DNS server-group DefaultDNS

uk domain name

object-group network ExternalAccess

Description hosts allowed direct web access

network object-SVR-01 255.255.255.255

SVR GIS 255.255.255.255 network-object

host of network-object cient

host villages network-object

the ExternalAccessFromDMZ object-group network

Description hosts allowed direct web access to DMZ

CITRIX-device 255.255.255.255 network-object

network-object IRONPORT1 255.255.255.255

worker of the object-network 255.255.255.255

MitelUDPinternet udp service object-group

Description Mitel UDP services on the internet

20000-27000 object-port Beach

port-object eq sip

port-object eq 5064

MitelTCPinternet tcp service object-group

Description Mitel TCP services on the internet

port-object eq 2114

port-object eq 2116

port-object eq 35000

port-object eq 37000

port-object eq 3998

6801-6802 object-port Beach

port-object eq 6880

port-object eq www

EQ object of the https port

port-object eq 6800

EQ object Port 3478

port-object eq sip

EQ port ssh object

MitelTCPinternetOpt tcp service object-group

Description Mitel TCP optional services on the internet

port-object eq 3300

6806-6807 object-port Beach

36005 36005 object-port Beach

36005 36006 object-port Beach

EQ object Port 3478

port-object eq sip

MitelUDP2LAN udp service object-group

Description Mitel UDP for the local network of services

object-port range 1024-65535

port-object eq sip

MitelTCP2LAN tcp service object-group

Description Mitel TCP for the local network of services

port-object eq 2114

port-object eq 2116

port-object eq 35000

port-object eq 37000

port-object eq 1606

object-port 4443 eq

port-object eq 3998

port-object eq 3999

6801-6802 object-port Beach

port-object eq 6880

port-object eq www

EQ object of the https port

EQ object Port 3478

port-object eq sip

acl_outside list extended access permit icmp any any echo response

acl_outside list extended access allow all unreachable icmp

acl_outside list extended access permit icmp any any source-quench

acl_outside list extended access permit tcp any host Mail_Outside_AGH eq smtp

acl_outside list extended access permit tcp any host Mail_Outside_AGH eq https

acl_outside list extended access permit tcp any host x.x.x.123 eq ssh

acl_outside list extended access permit tcp host x.x.x.x host Icritical_Outside eq ssh

acl_outside list extended access permit tcp any host Citrix_Portal_outside eq 8088

acl_outside list extended access permit tcp any host Citrix_Portal_outside eq https

acl_outside list extended access permit tcp any host Citrix_Portal_outside eq 8081

acl_outside list extended access permit tcp any host Mail_Outside_AVON eq smtp

acl_outside list extended access permit tcp any host Mail_Outside_AVON eq https

acl_outside list extended access permit udp host x.x.x.x host Icritical_Outside eq snmp

acl_outside list extended access permit udp host x.x.x.x host Icritical_Outside eq snmp

acl_outside list extended access permit tcp any host teleworker_outside MitelTCPinternet object-group

acl_outside list extended access permit udp any host teleworker_outside MitelUDPinternet object-group

acl_outside list extended access permit tcp any host teleworker_outside MitelTCPinternetOpt object-group

acl_outside list extended access permit tcp host x.x.x.x host Icritical_Outside eq ssh

acl_outside list extended access permit udp any host ESX-PAL-01 eq ntp

acl_outside list extended access permit udp any host ESX-PAL-02 eq ntp

acl_outside list extended access permit udp any host ESX-PAL-03 eq ntp

inside_outbound_nat0_acl to access ip 192.168.1.0 scope list allow 255.255.255.0 172.30.100.0 inactive 255.255.255.224

inside_outbound_nat0_acl list of allowed ip extended access all 172.31.1.0 255.255.255.0

inside_outbound_nat0_acl to access extended list ip 192.168.3.0 allow 255.255.255.0 192.168.103.0 255.255.255.0

inside_outbound_nat0_acl to access extended list ip 192.168.3.0 allow 255.255.255.0 192.168.72.0 255.255.255.0

inside_pnat_outbound list extended access allowed object-group ip ExternalAccess everything

acl_dmz list extended access permit ip host host IRONPORT1 Mail_Inside_AGH

acl_dmz list extended access permit udp host field of pal-svr-22 eq IRONPORT1 host

acl_dmz list extended access permit tcp host IRONPORT1 host pal-svr-22 eq 3268

acl_dmz list extended access permit udp host host IRONPORT1 ARM-SVR-01 eq field

acl_dmz list extended access permit tcp host IRONPORT1 host ARM-SVR-01 eq 3268

acl_dmz list extended access permit udp host host IRONPORT1 Pal-Svr-17 eq field

acl_dmz list extended access allowed icmp host host IRONPORT1 Mail_Inside_AGH

access extensive list ip 192.168.103.0 acl_dmz allow 255.255.255.0 any

acl_dmz list extended access permit tcp host host CITRIX-device-CITRIXCSG-lan eq https inactive

acl_dmz list extended access permit ip any host CITRIXCSG-lan idle

acl_dmz list extended access permit tcp host IRONPORT1 eq Mail_Outside_AGH smtp

acl_dmz list extended access permit tcp host teleworker host 192.168.20.1 object-group MitelTCP2LAN

acl_dmz list extended access permit udp host teleworker host 192.168.20.1 object-group MitelUDP2LAN

dmz_pnat_outbound list extended access allowed object-group ip ExternalAccessFromDMZ all

access extensive list ip 192.168.103.0 dmz_nat0_inbound allow 255.255.255.0 192.168.3.0 255.255.255.0

dmz_nat0_inbound list of ip host 192.168.20.1 telecommuter host allowed extended access

access extensive list ip 192.168.21.0 inside_pnat_outbound_AVON allow 255.255.255.0 any

access extensive list ip 192.168.22.0 inside_pnat_outbound_AVON allow 255.255.255.0 any

access extensive list ip 192.168.23.0 inside_pnat_outbound_AVON allow 255.255.255.0 any

access extensive list ip 192.168.24.0 inside_pnat_outbound_AVON allow 255.255.248.0 all

inside_pnat_outbound_AVON to access extended list ip 192.168.32.0 allow 255.255.240.0 everything

access extensive list ip 192.168.48.0 inside_pnat_outbound_AVON allow 255.255.248.0 all

access extensive list ip 192.168.56.0 inside_pnat_outbound_AVON allow 255.255.252.0 all

access extensive list ip 192.168.60.0 inside_pnat_outbound_AVON allow 255.255.255.0 any

allow any scope to an entire ip access list

inside_nat_AVON_Marshall list extended access permit ip host Mail_Inside_AVON all

dmz_pnat1_outbound list of ip telecommuter host allowed extended access any

outside_1_cryptomap to access extended list ip 192.168.3.0 allow 255.255.255.0 192.168.72.0 255.255.255.0

pager lines 24

Enable logging

asdm of logging of information

logging e-mail notifications

uk address record

exploitation forest-address recipient [email protected] / * / critical level

Outside 1500 MTU

Within 1500 MTU

MTU 1500 dmz

management of MTU 1500

IP local pool vpnpool 172.31.1.1 - 172.31.1.254 mask 255.255.255.0

no failover

ICMP unreachable rate-limit 1 burst-size 1

ICMP allow any inside

ICMP allow no dmz echo

ICMP allow all dmz

ASDM image disk0: / asdm-625 - 53.bin

ASDM location SVR-01 255.255.255.255 inside

ASDM location svr-02 255.255.255.255 inside

ASDM location IRONPORT1 255.255.255.255 dmz

ASDM location 194.81.55.226 255.255.255.255 dmz

ASDM 255.255.255.255 inside server location

ASDM location CITRIX-device 255.255.255.255 dmz

ASDM group ExternalAccess inside

ASDM group dmz ExternalAccessFromDMZ

don't allow no asdm history

ARP timeout 14400

Global x.x.x.121 2 (outdoor)

Global 1 x.x.x.125 (outside)

Global Mail_Outside_AVON 3 (outside)

Global Mail_Outside_AGH 4 (outside)

Global teleworker_outside 5 (outside)

NAT (inside) 0-list of access inside_outbound_nat0_acl

NAT (inside) 2-list of access inside_pnat_outbound_AVON

NAT (inside) 3 access-list inside_nat_AVON_Marshall

NAT (inside) 1 access-list inside_pnat_outbound

NAT (dmz) 0-list of access dmz_nat0_inbound outside

NAT (dmz) 4 access-list dmz_pnat_outbound

NAT (dmz) 5 access-list dmz_pnat1_outbound

static (inside, outside) tcp ssh Icritical ssh netmask 255.255.255.255 Icritical_Outside

static (inside, outside) tcp https Mail_Outside_AGH Mail_Inside_AGH https netmask 255.255.255.255

static (dmz, outside) tcp smtp smtp IRONPORT1 netmask 255.255.255.255 Mail_Outside_AGH

static (inside, outside) tcp https Mail_Outside_AVON Exchange_Inside_AVON https netmask 255.255.255.255

static (inside, outside) tcp smtp smtp Mail_Inside_AVON netmask 255.255.255.255 Mail_Outside_AVON

static (inside, outside) udp snmp Icritical snmp netmask 255.255.255.255 Icritical_Outside

static (dmz, outside) device-CITRIX-Citrix_Portal_outside netmask 255.255.255.255

static (inside, outside) Mail_Outside_AVON Mail_Inside_AVON netmask 255.255.255.255

static (dmz, external) teleworker_outside netmask 255.255.255.255 teleworker

Access-group acl_outside in interface outside

Access-group acl_dmz in dmz interface

Route outside 0.0.0.0 0.0.0.0 X.X.X.254 1

Route inside 192.168.0.0 255.255.0.0 192.168.3.3 1

Timeout xlate 03:00

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

dynamic-access-policy-registration DfltAccessPolicy

Enable http server

oner http 255.255.255.255 inside

http 192.168.1.0 255.255.255.0 management

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown cold start

Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

life crypto ipsec security association seconds 28800

Crypto ipsec kilobytes of life - safety 4608000 association

Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

card crypto outside_map 1 match address outside_1_cryptomap

card crypto outside_map 1 set pfs Group1

card crypto outside_map 1 set r.r.r.244 counterpart

card crypto outside_map 1 set of transformation-ESP-3DES-SHA

outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

outside_map interface card crypto outside

crypto ISAKMP allow outside

crypto ISAKMP policy 10

preshared authentication

3des encryption

sha hash

Group 2

life 86400

No encryption isakmp nat-traversal

Telnet timeout 5

SSH x.x.x.x 255.255.255.255 outside

SSH Mail_Inside_AGH 255.255.255.255 inside

SSH timeout 5

Console timeout 0

management of 192.168.1.2 - dhcpd address 192.168.1.254

enable dhcpd management

!

a basic threat threat detection

statistical threat detection port

Statistical threat detection Protocol

Statistics-list of access threat detection

a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200

prefer NTP server SVR - DC1 source inside

internal VPN group policy

attributes of VPN group policy

value 192.168.x.x 192.168.x.x WINS server

Server DNS value 192.168.x.x 192.168.x.x

enable IPSec-udp

value by default domain-ACE

username, password pmmPwcDD/inpnNfB VPN encrypted privilege 0

attributes of VPN username

Strategy-Group-VPN VPN

VPN Tunnel-group type remote access

General-attributes of VPN Tunnel-group

address vpnpool pool

Group Policy - by default-VPN

Group-tunnel VPN ipsec-attributes

pre-shared key *.

tunnel-group r.r.r.244 type ipsec-l2l

r.r.r.244 tunnel ipsec-attributes group

pre-shared key *.

by default-group r.r.r.244 tunnel-Group-map

!

class-map inspection_default

match default-inspection-traffic

!

!

type of policy-card inspect dns migrated_dns_map_1

parameters

message-length maximum 512

Policy-map global_policy

class inspection_default

inspect the migrated_dns_map_1 dns

inspect the ftp

inspect h323 h225

inspect the h323 ras

inspect the rsh

inspect the rtsp

inspect esmtp

inspect sqlnet

inspect the skinny

inspect sunrpc

inspect xdmcp

inspect the netbios

inspect the tftp

inspect the sip

!

global service-policy global_policy

context of prompt hostname

Cryptochecksum:8360816431357f109b3c4b950d545c86

: end

This route is duplicated with the remote network

Route inside 192.168.0.0 255.255.0.0 192.168.3.3 1

I suggest to make this more specific subnet or add something like

Route outside 192.168.72.0 255.255.255.0 outside_default_gateway_ip

Internal, if above not in fact help, put a trace packet to simulate traffic even that fails on the 5510.

http://www.Cisco.com/en/us/docs/security/ASA/asa80/command/reference/p.html#wp1878788

Kind regards

IP overlapping between VPN remote access and within the interface

Hi all

I tried to replace an ASA and configured vpn for remote access using cisco VPN client.

Remote access users are not able to access within the network, but have no problem accessing the network through a VPN site-to site.

One thing to note is that remote access VPN users are assigned an ip address of 10.X.3.1 - 10.X.3.200 mask 255.255.255.0. The inside interface is on 10.X.1.2 255.255.0.0.

Remote access users will have no problem to access within the network if the pool of the vpn client is changed to 192.168.1.1 to 192.168.1.100.

ASA errors

6 January 7, 2012 16:25:08 302013 10.X.3.1 27724 3389 10.X.1.66 built of TCP connections incoming 20940 for outside:10.X.3.1/27724 (10.X.3.1/27724)(LOCAL\Cisco) at inside:10.X.1.66/3389 (10.X.1.66/3389) (Cisco)

6 January 7, 2012 16:25:08 106015 10.X.1.66 3389 10.X.3.1 27724 Deny TCP 10.X.1.66/3389 to 10.X.3.1/27724 flags SYN ACK on dmz interface (no link)

I understand that the overlap between access ip address range remote vpn network interface network and inside will cause routing problems, but why the syn - ack makes its appearance in the DMZ interface? The interface of the DMZ is on ip address 172.16.Y.1 255.255.255.0.

I intend to reduce the interface 10.X.0.0 255.255.254.0 inside if it is in fact a routing problem due to the IP address that overlap, but I understand why the syn - ack comes from the dmz interface and the diagnosis of the problem is correct. I check with the customer and was informed that the existing design works on an another ASA with no such problems.

I agree what you said and also tried, but it does not work.

http://www.Cisco.com/en/us/products/ps6120/products_tech_note09186a00807e0aca.shtml#overlap

Solution, that you already know

Solution

Always ensure that the IP addresses in the pool should be assigned to VPN, network clients internal head unit and the internal network to the VPN Client must be in different networks. You can assign the same major network with different subnets, but sometimes the routing problems.

Thank you

Ajay

VPN Site to Site and remote access

I have ASA certified with 25 concurrent VPN connections. I want to know if I have 20 remote tunnels and 5 Site-to-Site created on the same time tunnels, and I want to establish the new Site to the other tunnel, is him Site to Site remove the remote tunnels or can not put in place. Site at tunnels have a higher priority than the remote access or they are the same. Site at tunnels are more important to me and I need them to repress the remote access tunnels.

Hello

Sorry for the confusion. No you can not set the parameter like this.

Thank you

Gilbert

Remote access to the site to site VPN

We currently have a VPN site-to-site set up on a direct line between our two data centers. Hosts on site one can speak to guests at site B, and talk to the hosts to site A to site B guests.

I've recently implemented a site A. VPN VPN remote access clients can access all of the resources behind the ASA at A site without problem. However, strange things happen when they try to contact the site B.

I have set up corresponding exemptions of NAT on each side of the connection. The remote site reported no abnormalities. When you attempt to connect to a remote VPN client to site B, the only errors that appear are on the SAA to site A. When a remote client attempts to connect to a host at site B, the following errors appear in the log:

% ASA-3-305005: no group of translation not found for tcp src outside:10.3.0.1/60851 dst ds3:10.0.1.42/22

I have the exemption following NAT set up on site A:

access-list sheep; 3 items

access-list 1 permit line sheep extended ip 10.1.0.0 255.255.0.0 10.0.0.0 255.255.0.0 (hitcnt = 0)

allowed to Access-list sheep lengthened 2 ip line 10.1.0.0 255.255.0.0 10.3.0.0 255.255.255.0 (hitcnt = 0)

allowed to Access-list sheep line 3 extended ip 10.3.0.0 255.255.255.0 10.0.0.0 255.255.0.0 (hitcnt = 0)

I work on it for a few days now and hesitate to open a ticket of TAC. I've seen a few similar questions on the forums, but have found zero with a working solution. I tried to follow the technical notes on Cisco's Web site for a configuration similar to, but had no luck.

Also, I enabled same-security-traffic on intra and inter-interface interface.

Any help would be appreciated.

HUB of the ASA, is this your topology? If so try below suggestions.

Inside 10.1.1.0/16 Net

Net 172.16.0.0/28 - net through Tunnel L2L 10.0.0.0/16 end DS3

VPN RA Net 10.3.0.0/24

To RA to access the L2L tunnel end hosting you will need to exempt sheep rule applied to the ds3 interface.

based on the journal

% ASA-3-305005: no group of translation not found for tcp src outside:10.3.0.1/60851 dst ds3:10.0.1.42/22

Try this

no scope list ip 10.3.0.0 access test allow 255.255.255.0 10.0.0.0 255.255.0.0

test the ip 10.0.0.0 allowed extended access list 255.255.0.0 10.3.0.0 255.255.255.0

test access list 0 Tan (ds3)

on the end of the tunnel (spoke), to allow the network of RA from the FOCUS of the ASA in the interesting traffic.

Let us know how it works

Concerning

remote VPN and vpn site to site vpn remote users unable to access the local network

As per below config remote vpn and vpn site to site vpn remote users unable to access the local network please suggest me a required config

The local 192.168.215.4 not able ping server IP this server connectivity remote vpn works fine but not able to ping to the local network vpn users.

ASA Version 8.2 (2)
!
host name
domain kunchevrolet
activate r8xwsBuKsSP7kABz encrypted password
r8xwsBuKsSP7kABz encrypted passwd
names of
!
interface Ethernet0/0
nameif outside
security-level 0
PPPoE client vpdn group dataone
IP address pppoe
!
interface Ethernet0/1
nameif inside
security-level 50
IP 192.168.215.2 255.255.255.0
!
interface Ethernet0/2
nameif Internet
security-level 0
IP address dhcp setroute
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
Shutdown
No nameif
no level of security
no ip address
management only
!
passive FTP mode
clock timezone IST 5 30
DNS server-group DefaultDNS
domain kunchevrolet
permit same-security-traffic intra-interface
object-group network GM-DC-VPN-Gateway
object-group, net-LAN
access extensive list ip 192.168.215.0 sptnl allow 255.255.255.0 192.168.2.0 255.255.255.0
192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
tunnel of splitting allowed access list standard 192.168.215.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
MTU 1500 Internet
IP local pool VPN_Users 192.168.2.1 - 192.168.2.250 mask 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
enable ASDM history
ARP timeout 14400
NAT-control
Global 1 interface (outside)
NAT (inside) 1 0.0.0.0 0.0.0.0
Route outside 0.0.0.0 0.0.0.0 59.90.214.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
AAA authentication LOCAL telnet console
AAA authentication http LOCAL console
AAA authentication enable LOCAL console
LOCAL AAA authentication serial console
Enable http server
x.x.x.x 255.255.255.252 out http
http 192.168.215.0 255.255.255.252 inside
http 192.168.215.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto-map dynamic dynmap 65500 transform-set RIGHT
card crypto 10 VPN ipsec-isakmp dynamic dynmap
card crypto VPN outside interface
card crypto 10 ASA-01 set peer 221.135.138.130
card crypto 10 ASA - 01 the transform-set RIGHT value
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 65535
preshared authentication
the Encryption
sha hash
Group 2
lifetime 28800
Telnet 192.168.215.0 255.255.255.0 inside
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 5
Console timeout 0
management-access inside
VPDN group dataone request dialout pppoe
VPDN group dataone localname bb4027654187_scdrid
VPDN group dataone ppp authentication chap
VPDN username bb4027654187_scdrid password * local store
interface for identifying DHCP-client Internet customer
dhcpd dns 218.248.255.141 218.248.245.1
!
dhcpd address 192.168.215.11 - 192.168.215.254 inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
Des-sha1 encryption SSL
WebVPN
allow outside
tunnel-group-list activate
internal kun group policy
kun group policy attributes
VPN - connections 8
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value split tunnel
kunchevrolet value by default-field
test P4ttSyrm33SV8TYp encrypted password username
username kunauto password bSHrKTGl8PUbvus / encrypted privilege 15
username kunauto attributes
Strategy Group-VPN-kun
Protocol-tunnel-VPN IPSec
tunnel-group vpngroup type remote access
tunnel-group vpngroup General attributes
address pool VPN_Users
Group Policy - by default-kun
tunnel-group vpngroup webvpn-attributes
the vpngroup group alias activation
vpngroup group tunnel ipsec-attributes
pre-shared key *.
type tunnel-group test remote access
tunnel-group x.x.x.x type ipsec-l2l
tunnel-group ipsec-attributes x.x.x.x
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:0d2497e1280e41ab3875e77c6b184cf8
: end
kunauto #.

Hello

Looking at the configuration, there is an access list this nat exemption: -.

192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0

But it is not applied in the States of nat.

Send the following command to the nat exemption to apply: -.

NAT (inside) 0 access-list sheep

Kind regards

Dinesh Moudgil

P.S. Please mark this message as 'Responded' If you find this information useful so that it brings goodness to other users of the community

A Site to remote access VPN behind the same public IP address

Got a problem quite stupid. We have a VPN from Site to Site configured for a new data center, which will be responsible for general traffic management. In addition, some users need to use use a VPN client to access certain areas. The firewall at the Office only has a public IP address, so the two will come to the Site to Site VPN for remote access from the same source.

This seems a problem with legacy Cisco VPN clients because encryption card matches the entry VPN site-to-site, even if they use VPN clients. A good/simple solution to solve this problem?

Some newspapers (198.18.85.23) is the address public IP for the office and the tom.jones is the user. 192.168.1.0/24 is the pool of the VPN client.

January 7, 2014 19:12:52 ASA5515: % 713130-5-ASA: Group = Corp-VPN, Username = tom.smith, IP = 198.18.85.23, transaction mode attribute unhandled received: 5

January 7, 2014 19:12:52 ASA5515: % 737003-5-ASA: PISG: DHCP not configured, no viable servers found for tunnel-group "Corp-VPN.

January 7, 2014 19:12:52 ASA5515: % 713119-5-ASA: Group = Corp-VPN, Username = tom.smith, IP = 198.18.85.23, PHASE 1 COMPLETED

January 7, 2014 19:12:52 ASA5515: % ASA-3-713061: Group = Corp-VPN, Username = tom.smith, IP = 198.18.85.23, IPSec tunnel rejecting: no entry for crypto for proxy card remote proxy 192.168.1.4/255.255.255.255/0/0 local 0.0.0.0/0.0.0.0/0/0 on the interface outside

January 7, 2014 19:12:52 ASA5515: % ASA-3-713902: Group = Corp-VPN, Username = tom.smith, IP = 198.18.85.23, error QM WSF (P2 struct & 0x00007fff28dab560, mess id 0x37575f3c).

January 7, 2014 19:12:52 ASA5515: % ASA-3-713902: Group = Corp-VPN, Username = tom.smith, IP = 198.18.85.23, peer table correlator Removing failed, no match!

January 7, 2014 19:12:52 ASA5515: % 713259-5-ASA: Group = Corp-VPN, Username = tom.smith, IP = 198.18.85.23, Session is be demolished. Reason: political crypto card not found

January 7, 2014 19:12:52 ASA5515: % ASA-4-113019: Group = Corp-VPN, Username = tom.smith, IP = 198.18.85.23, disconnected Session. Session type: IKEv1, duration: 0 h: 00 m: 02s, xmt bytes: 0, RRs bytes: 0, right: not found card crypto policy

January 7, 2014 19:12:53 ASA5515: % 713904-5-ASA: IP = 198.18.85.23, encrypted packet received with any HIS correspondent, drop

Hello

Don't know if this will work, but you can try the following configuration (with the rest of the VPN configuration)

list-access CLIENT VPN ip enable any 192.168.1.0 255.255.255.0

card crypto OUTSIDE_map 4 is the VPN CLIENT address

card crypto OUTSIDE_map 4 set peer 198.18.85.23

card crypto OUTSIDE_map 4 set ikev1 transform-set ESP-AES-128-SHA ESP-3DES-SHA

The idea would be to have the ACL matches the VPN full Tunnel that the Client attempts to establish. (destination "any" from the point of view of the customer, the ASAs view source)

I tested briefly on my own SAA by connecting from an IP address to which the ASA offers free VPN in L2L. But as I don't have the operational L2L VPN, I can't really verify the VPN L2L at the moment. Thus, certain risks may be involved if you can afford it.

-Jouni

ASA 5510 vpn remote access - must now be added vpn site-to-site.

We currently have a configuration of remote access vpn and all this hard work.

I need to configure a vpn lan lan 2 now.

Can someone point me to the documentation on that? I used the command line to add a site to site and wrong on it and disconnected me when I applied the crypto map to the external interface. Do I need another card encryption or should I use my existing?

Shannon,

Please see the below URL for more configuration information. Even if that configuration is dynamic to static IPSEC, you can use the concept to build the Tunnel L2L with static IP.

http://www.Cisco.com/en/us/partner/products/ps6120/products_configuration_example09186a00805733df.shtml

Let me know if it helps.

Kind regards

Arul

* Please note all useful messages *.

Help with 1921 SRI Easy VPN remote w / Easy VPN Site-to-Site access

I have two 1921 ISR routers configured with easy site to site VPN. I configured VPN each ISR ACL so that all networks on each site can communicate with the private networks of the other site. I have a 1921 SRI also configured as an easy VPN server.

Problem: when a remote user connects to the easy VPN server, the user can only access private networks on the site of the VPN server. I added the IP network that is used for remote users (i.e. the Easy VPN Server IP pool) to each VPN ACL 1921, but the remote user still cannot access other sites private network via the VPN site to another and vice versa.

Problem: I also have a problem with the easy VPN server, do not place a static host route in its routing table when he established a remote connection to the remote user and provides the remote user with an IP address of the VPN server's IP pool. The VPN server does not perform this task the first time the user connects. If the user disconnects and reconnects the router VPN Server does not have the static host route in its routing table for the new IP address given on the later connection.

Any help is appreciated.

THX,

Greg

Hello Greg,.

The ASAs require the "same-security-traffic intra-interface permits" to allow through traffic but routers allow traversed by default (is there no need for equivalent command).

Therefore, VPN clients can access A LAN but can't access the Remote LAN B on the Site to Site.

You have added the pool of the VPN client to the ACL for the interesting site to Site traffic.

You must also add the Remote LAN B to the ACL of tunneling split for VPN clients (assuming you are using split tunneling).

In other words, the VPN router configuration has for customers VPN should allow remote control B LAN in the traffic that is allowed for the VPN clients.

You can check the above and do the following test:

1. try to connect to the remote VPN the B. LAN client

2. check the "sh cry ips his" for the connection of the VPN client and check if there is a surveillance society being built between the pool and Remote LAN B.

Federico.

Site to Site and together on ASA 5505 VPN remote access

Hello

I tried to set up a VPN Site again on an ASA5505 where there already is a VPN remote on it.

After you add the new configuration lines, I received the following message when I debug:

04 Nov 07:06:06 [IKEv1]: group = , IP = , error QM WSF (P2 struct & 0xd91a4d10, mess id 0xeac05ec0).

04 Nov 07:04:36 [IKEv1]: group = , IP = , peer of drop table Correlator has failed, no match!

Someone knows what's the problem? And what to change in the config?

Thanks in advance,

Ruben

Hello

If the ASA had a remote access VPN and you add a new Site-to-Site you must make sure that the priority for the card encryption is weaker for the new Site-to - added Site.This is because otherwise traffic will always try to match the access tunnel at distance. You can check it with the command "sh run card cry"

Federico.

2 VPN SITE to SITE with ACCESS REMOTE VPN

Hello

I have a 870 router c and I would like to put 2 different VPN SITE to SITE and access remote VPN (VPN CLIENTS) so is it possible to put 3 VPN in the router even if yes can u give me the steps or the sample configuration

Concerning

Thus, on the routers will be:

Cisco 2611:

LAN: 10.10.10.0/24

access-list 100 permit ip 10.10.10.0 0.0.0.255 10.10.20.0 0.0.0.255

access-list 100 permit ip 14.1.1.0 0.0.0.255 10.10.20.0 0.0.0.255--> VPNPOOL

!

10 ipsec-isakmp crypto map clientmap

defined by peer 172.18.124.199

match address 100

!

IP local pool ippool 14.1.1.1 14.1.1.254

!

access-list 120 allow ip 10.10.10.0 0.0.0.255 14.1.1.0 0.0.0.255

access-list 120 allow ip 10.10.20.0 0.0.0.255 14.1.1.0 0.0.0.255 --> NETWORK REMOTE

!

crypto ISAKMP client configuration group ra-customer

pool ippool

ACL 120

!

Please note that the configuration is incomplete, I added that relevant changes, you should bring to the allow clients of RA through the LAN-to-LAN tunnel, of course, the LAN-to-LAN settings should match to the other side of the tunnel that is mirror of ACL, NAT and so on.

HTH,

Portu.

problem with users to access remote vpn site to site vpn network

I did the Setup: asa 5510 configured remote access vpn. My vpn users receive asa 5510 range 192.168.50.0/24 addresses and users access my local lan 192.168.0.0/24. the second side of the local lan 192.168.0.0/24 on asa 5505, I did a vpn site-to-site with network 192.168.5.0/24.on that both sides of a site are asa 5505. inside the interface asa 5510 Elise 192.168.0.10 and inside the interface asa 5505 have address 192.168.0.17.third asa 5505 networked 192.168.5.0/24 address 192.168.5.1. I want my remote access vpn users can access resources on network 192.168.5.0/24. I create the static route on inside the asa 5510 static route 192.168.5.0 interface 255.255.255.0 192.168.0.17 and a static route on inside the asa 5505 static route 192.168.50.0 interface 255.255.255.0 192.168.0.10, but it's not working. What do I do?

execution of the configuration of my asa 5510 is

Result of the command: "show run"

: Saved
:
ASA Version 8.4(2)
!
hostname asa5510
domain-name dri.local
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
!
interface Ethernet0/0
nameif outside
security-level 0
ip address x.x.x.178 255.255.255.248
!
interface Ethernet0/1
nameif inside
security-level 100
ip address 192.168.0.10 255.255.255.0
!
interface Ethernet0/2
description Mreza za virtualne masine- mail server, wsus....
nameif DMZ
security-level 50
ip address 172.16.20.1 255.255.255.0
!
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
!
interface Management0/0
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
management-only
!
ftp mode passive
clock timezone CEST 1
clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00
dns server-group DefaultDNS
domain-name dri.local
object network VPN-POOL
subnet 192.168.50.0 255.255.255.0
description VPN Client pool
object network LAN-NETWORK
subnet 192.168.0.0 255.255.255.0
description LAN Network
object network NETWORK_OBJ_192.168.0.0_24
subnet 192.168.0.0 255.255.255.0
object network 192.168.0.10
host 192.168.0.10
object service ssl
service tcp destination eq 465
object service tls
service tcp destination eq 995
object network mail_server
host 172.16.20.201
object service StartTLS
service tcp destination eq 587
object service admin_port
service tcp destination eq 444
object service ODMR
service tcp destination eq 366
object service SSL-IMAP
service tcp destination eq 993
object network remote
host 172.16.20.200
object network test
host 192.168.0.22
object network mail
host 172.16.20.200
object network DMZ
host 172.16.20.200
object network Inside_DMZ
host 192.168.0.20
object service rdp
service tcp destination eq 3389
object network DRI_PS99
host 192.168.0.54
object service microsoft_dc
service tcp destination eq 445
object service https448
service tcp destination eq 448
object network mail_server_internal
host 172.16.20.201
object service Acronis_remote
service tcp destination eq 9876
object service Acronis_25001
service tcp destination eq 25001
object service HTTP3000
service tcp destination eq 3000
object network VPNPOOL
subnet 192.168.50.0 255.255.255.0
object-group network PAT-SOURCE-NETWORKS
description Source networks for PAT
network-object 192.168.0.0 255.255.255.0
object-group service DM_INLINE_SERVICE_1
service-object object admin_port
service-object object ssl
service-object object tls
service-object object https448
object-group service DM_INLINE_SERVICE_2
service-object object admin_port
service-object object https448
service-object object ssl
service-object object tls
service-object tcp destination eq pop3
service-object tcp destination eq smtp
object-group service DM_INLINE_SERVICE_3
service-object object admin_port
service-object object https448
service-object object ssl
service-object tcp destination eq smtp
service-object object tls
service-object object Acronis_remote
service-object tcp destination eq www
service-object object Acronis_25001
service-object object microsoft_dc
object-group protocol DM_INLINE_PROTOCOL_1
protocol-object ip
protocol-object tcp
object-group service DM_INLINE_SERVICE_4
service-object object Acronis_25001
service-object object Acronis_remote
service-object object microsoft_dc
service-object tcp destination eq www
service-object tcp
service-object ip
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_2 any object mail_server
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_1 any object mail
access-list Split_Tunnel_List extended permit ip 192.168.0.0 255.255.255.0 any
access-list outside_cryptomap extended permit ip 192.168.0.0 255.255.255.0 192.168.5.0 255.255.255.0
access-list DMZ extended permit object-group DM_INLINE_SERVICE_4 172.16.20.0 255.255.255.0 any
access-list DMZ extended permit object-group DM_INLINE_SERVICE_3 host 172.16.20.201 any
access-list DMZ extended permit object-group DM_INLINE_PROTOCOL_1 172.16.20.0 255.255.255.0 any inactive
access-list DMZ extended deny tcp any any eq smtp
pager lines 24
logging enable
logging asdm informational
mtu outside 1500
mtu inside 1500
mtu DMZ 1500
mtu management 1500
ip local pool vpnadrese 192.168.50.1-192.168.50.100 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (inside,outside) source static LAN-NETWORK LAN-NETWORK destination static VPN-POOL VPN-POOL
!
object network mail_server
nat (DMZ,outside) static x.x.x.179
object network mail
nat (DMZ,outside) static x.x.x.180
access-group outside_access_in in interface outside
access-group DMZ in interface DMZ
route outside 0.0.0.0 0.0.0.0 178.254.133.177 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
action terminate
dynamic-access-policy-record dripolisa
aaa-server DRI protocol ldap
aaa-server DRI (inside) host 192.168.0.20
ldap-base-dn DC=dri,DC=local
ldap-scope subtree
ldap-naming-attribute sAMAccountName
ldap-login-password *****
ldap-login-dn CN=dragan urukalo,OU=novisad,OU=sektor2,OU=REVIZIJA,DC=dri,DC=local
server-type microsoft
user-identity default-domain LOCAL
aaa authentication enable console LOCAL
aaa authentication http console LOCAL
aaa authentication serial console LOCAL
aaa authentication telnet console LOCAL
aaa authorization command LOCAL
http server enable
http 192.168.1.0 255.255.255.0 management
http 192.168.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
virtual telnet 192.168.1.12
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 1 match address outside_cryptomap
crypto map outside_map 1 set peer 195.222.96.223
crypto map outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 1 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 enable outside
crypto ikev1 enable outside
crypto ikev1 policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet 192.168.0.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
!
dhcpd address 192.168.0.14-192.168.0.45 inside
!
dhcpd address 172.16.20.2-172.16.20.150 DMZ
dhcpd dns x.x.x.177 interface DMZ
dhcpd auto_config outside interface DMZ
dhcpd option 6 ip x.x.x.177 interface DMZ
dhcpd enable DMZ
!
dhcpd address 192.168.1.2-192.168.1.254 management
dhcpd enable management
!
threat-detection basic-threat
threat-detection statistics port
threat-detection statistics protocol
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy GroupPolicy_x.x.x.223 internal
group-policy GroupPolicy_x.x.x.223 attributes
vpn-tunnel-protocol ikev1 ikev2
group-policy drivpn internal
group-policy drivpn attributes
dns-server value 192.168.0.20 192.168.0.254
vpn-simultaneous-logins 10
vpn-idle-timeout 30
vpn-tunnel-protocol ikev1 l2tp-ipsec
split-tunnel-network-list value Split_Tunnel_List
default-domain value dri.local
username driadmin password AojCAMO/soZo8W.W encrypted privilege 15
tunnel-group drivpn type remote-access
tunnel-group drivpn general-attributes
address-pool vpnadrese
authentication-server-group DRI
default-group-policy drivpn
tunnel-group drivpn ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group x.x.x.223 type ipsec-l2l
tunnel-group x.x.x.223 general-attributes
default-group-policy GroupPolicy_x.x.x.223
tunnel-group x.x.x.223 ipsec-attributes
ikev1 pre-shared-key *****
ikev2 remote-authentication pre-shared-key *****
ikev2 local-authentication pre-shared-key *****
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect tftp
inspect ip-options
inspect netbios
inspect icmp
inspect http
!
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:69c651e94663fc570b67e0c4c0dcbae1
: end

running config asa 5505

Result of the command: "show run"

: Saved
:
ASA Version 8.2(1)
!
hostname ciscoasa
enable password csq7sfr0bQJqMGET encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
name 192.168.5.0 PALATA
!
interface Vlan1
nameif inside
security-level 100
ip address 192.168.0.17 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
ip address 10.13.74.33 255.255.255.0
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
ftp mode passive
clock timezone CEST 1
clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00
object-group service DM_INLINE_SERVICE_1
service-object ip
service-object tcp
service-object icmp echo
service-object icmp echo-reply
service-object tcp eq domain
service-object tcp eq ldap
service-object tcp eq smtp
object-group service DM_INLINE_SERVICE_2
service-object ip
service-object tcp eq domain
service-object tcp eq www
service-object tcp eq https
service-object tcp eq smtp
object-group service Sharepoint8080 tcp
port-object eq 8080
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_1 any any
access-list inside_access_in extended permit object-group DM_INLINE_SERVICE_2 192.168.0.0 255.255.255.0 any
access-list inside_nat0_outbound extended permit ip 192.168.0.0 255.255.255.0 PALATA 255.255.255.0
access-list outside_2_cryptomap extended permit ip 192.168.0.0 255.255.255.0 PALATA 255.255.255.0
access-list inside_nat0_outbound_1 extended permit ip 192.168.0.0 255.255.255.0 PALATA 255.255.255.0
pager lines 24
logging enable
logging asdm informational
logging mail errors
logging from-address
logging recipient-address level debugging
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound_1
nat (inside) 1 192.168.0.0 255.255.255.0
static (inside,outside) 10.13.74.35 192.168.0.22 netmask 255.255.255.255
static (inside,outside) 10.13.74.34 192.168.0.20 netmask 255.255.255.255 dns
access-group inside_access_in in interface inside
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 10.13.74.1 1
route inside 0.0.0.0 0.0.0.0 192.168.0.17 tunneled
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication telnet console LOCAL
http server enable
http 10.13.74.0 255.255.255.0 outside
http 192.168.0.0 255.255.255.0 inside
http 10.15.100.0 255.255.255.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
virtual telnet 192.168.0.53
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map outside_map 1 match address outside_2_cryptomap
crypto map outside_map 1 set pfs
crypto map outside_map 1 set peer 10.15.100.15
crypto map outside_map 1 set transform-set ESP-3DES-SHA
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet 192.168.0.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
!

threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
username driadmin password AojCAMO/soZo8W.W encrypted privilege 15
tunnel-group 10.15.100.15 type ipsec-l2l
tunnel-group 10.15.100.15 ipsec-attributes
pre-shared-key *
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect icmp
!
service-policy global_policy global
smtp-server 173.194.79.109
prompt hostname context
Cryptochecksum:4767b6764cb597f0a7b8b138587d4192
: end

Thank you

Hello

I have previously edited the my initial response was in fact not necessary since you were actually using full Tunnel

EDIT: Actually just noticed the the VPN client isnt using Split Tunnel. Its Full Tunnel at the moment since it doesnt have the "split-tunnel-policy tunnelspecified"

So you don't really have any of those.

Please mark the question answers and/or assess response

Ask more if necessary

-Jouni

Cannot access remote network by VPN Site to Site ASA

Hello everyone

First of all I must say that I have configured the VPN site-to site a million times before. Stuck with it. First of all I can't ping outside the interface of my ASA remote. Secondly, VPN is in place, but no connectivity between local networks

ASA local:
hostname gyd - asa
domain bct.az
activate the encrypted password of XeY1QWHKPK75Y48j
XeY1QWHKPK75Y48j encrypted passwd
names of
DNS-guard
!
interface GigabitEthernet0/0
Shutdown
nameif vpnswc
security-level 0
IP 10.254.17.41 255.255.255.248
!
interface GigabitEthernet0/1
Vpn-turan-Baku description
nameif outside Baku
security-level 0
IP 10.254.17.9 255.255.255.248
!
interface GigabitEthernet0/2
Vpn-ganja description
nameif outside-Ganja
security-level 0
IP 10.254.17.17 255.255.255.248
!
interface GigabitEthernet0/2.30
Description remote access
VLAN 30
nameif remote access
security-level 0
IP 85.*. *. * 255.255.255.0
!
interface GigabitEthernet0/3
Description BCT_Inside
nameif inside-Bct
security-level 100
IP 10.40.50.65 255.255.255.252
!
interface Management0/0
nameif management
security-level 100
IP 192.168.251.1 255.255.255.0
management only
!
boot system Disk0: / asa823 - k8.bin
passive FTP mode
DNS server-group DefaultDNS
name-server 192.168.1.3
domain bct.az
permit same-security-traffic intra-interface
object-group network obj - 192.168.121.0
object-group network obj - 10.40.60.0
object-group network obj - 10.40.50.0
object-group network obj - 192.168.0.0
object-group network obj - 172.26.0.0
object-group network obj - 10.254.17.0
object-group network obj - 192.168.122.0
object-group service obj-tcp-eq-22
object-group network obj - 10.254.17.18
object-group network obj - 10.254.17.10
object-group network obj - 10.254.17.26
access-list 110 scope ip allow a whole
NAT list extended access permit tcp any host 10.254.17.10 eq ssh
NAT list extended access permit tcp any host 10.254.17.26 eq ssh
access-list extended ip allowed any one sheep
icmp_inside list extended access permit icmp any one
icmp_inside of access allowed any ip an extended list
access list nat-ganja extended permit tcp any host 10.254.17.18 eq ssh
RDP list extended access permit tcp any host 192.168.45.3 eq 3389
rdp extended permitted any one ip access list
sheep-vpn access-list extended permits all ip 192.168.121.0 255.255.255.0
NAT-vpn-internet access-list extended ip 192.168.121.0 allow 255.255.255.0 any
NAT-vpn-internet access-list extended ip 172.26.0.0 allow 255.255.255.0 any
NAT-vpn-internet access-list extended ip 192.168.122.0 allow 255.255.255.0 any
access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 10.40.60.0 255.255.255.0
access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 10.40.50.0 255.255.255.0
access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 192.168.0.0 255.255.0.0
access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 172.26.0.0 255.255.255.0
access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 10.254.17.0 255.255.255.0
GHC-ganja-internet access-list extended ip 192.168.45.0 allow 255.255.255.0 any
Standard access list Split_Tunnel_List allow 192.168.16.0 255.255.255.0
azans 192.168.69.0 ip extended access-list allow 255.255.255.0 any
permit inside_nat0_outbound to access extended list ip 192.168.0.0 255.255.0.0 192.168.121.0 255.255.255.0
permit inside_nat0_outbound to access extended list ip 192.168.0.0 255.255.0.0 192.168.80.0 255.255.255.0
pager lines 24
Enable logging
emblem of logging
recording of debug console
recording of debug trap
asdm of logging of information
Interior-Bct 192.168.1.27 host connection
flow-export destination inside-Bct 192.168.1.27 9996
vpnswc MTU 1500
outside Baku MTU 1500
outside-Ganja MTU 1500
MTU 1500 remote access
Interior-Bct MTU 1500
management of MTU 1500
IP local pool raccess 192.168.121.60 - 192.168.121.120 mask 255.255.255.0
IP local pool ssl 192.168.121.130 - 192.168.121.200 mask 255.255.255.0
no failover
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any outside Baku
ICMP allow access remotely
ICMP allow any interior-Bct
ASDM image disk0: / asdm - 621.bin
don't allow no asdm history
ARP timeout 14400
global (outside-Baku) 1 interface
global (outside-Ganja) interface 2
3 overall (RAS) interface
azans access-list NAT 3 (outside-Ganja)
NAT (remote access) 0 access-list sheep-vpn-city
NAT 3 list nat-vpn-internet access (remote access)
NAT (inside-Bct) 0-list of access inside_nat0_outbound
NAT (inside-Bct) 2-nat-ganja access list
NAT (inside-Bct) 1 access list nat
Access-group rdp on interface outside-Ganja
!
Router eigrp 2008
No Auto-resume
neighbor 10.254.17.10 interface outside Baku
neighbor 10.40.50.66 Interior-Bct interface
Network 10.40.50.64 255.255.255.252
Network 10.250.25.0 255.255.255.0
Network 10.254.17.8 255.255.255.248
Network 10.254.17.16 255.255.255.248
redistribute static
!
Access remote 0.0.0.0 0.0.0.0 85.*. *. * 1
Outside-Baku route 10.0.11.0 255.255.255.0 10.254.17.10 1
Outside-Baku route 10.0.33.0 255.255.255.0 10.254.17.10 1
Outside-Baku route 10.0.150.0 255.255.255.0 10.254.17.10 1
Outside-Baku route 10.0.170.0 255.255.255.0 10.254.17.10 1
Route outside Baku 10.254.17.24 255.255.255.248 10.254.17.10 1
Route outside Baku 10.254.17.32 255.255.255.248 10.254.17.10 1
Route outside Baku 192.1.1.0 255.255.255.0 10.254.17.10 1
Outside-Baku route 192.168.27.0 255.255.255.0 10.254.17.10 1
Outside-Baku route 192.168.39.0 255.255.255.0 10.254.17.10 1
Route outside-Ganja 192.168.45.0 255.255.255.0 10.254.17.18 1
Route outside-Ganja 192.168.66.0 255.255.255.0 10.254.17.18 1
Route outside-Ganja 192.168.69.0 255.255.255.0 10.254.17.18 1
Outside-Baku route 192.168.80.0 255.255.255.0 10.254.17.11 1
Access remote 192.168.121.0 255.255.255.0 85.132.43.1 1
Route outside-Ganja 192.168.184.0 255.255.255.0 10.254.17.18 1
Route outside Baku 192.168.208.16 255.255.255.240 10.254.17.10 1
Route outside-Ganja 192.168.208.112 255.255.255.240 10.254.17.18 1
Route inside-Bct 192.168.254.0 255.255.255.0 10.40.50.66 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
AAA-server protocol Ganymede GANYMEDE +.
AAA-server GANYMEDE (Interior-Bct) 192.168.1.8
key *.
AAA-server GANYMEDE (Interior-Bct) 192.168.22.46
key *.
RADIUS protocol AAA-server TACACS1
AAA-server TACACS1 (Interior-Bct) host 192.168.1.8
key *.
AAA-server TACACS1 (Interior-Bct) host 192.168.22.46
key *.
authentication AAA ssh console LOCAL GANYMEDE
Console to enable AAA authentication RADIUS LOCAL
Console Telnet AAA authentication RADIUS LOCAL
AAA accounting ssh console GANYMEDE
Console Telnet accounting AAA GANYMEDE
Enable http server
http 192.168.1.0 255.255.255.0 management
http 192.168.1.0 255.255.255.0 Interior-Bct
http 192.168.139.0 255.255.255.0 Interior-Bct
http 192.168.0.0 255.255.255.0 Interior-Bct
Survey community SNMP-server host inside-Bct 192.168.1.27
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT
Crypto ipsec transform-set newset aes - esp esp-md5-hmac
Crypto ipsec transform-set esp-3des esp-sha-hmac myset2
Crypto ipsec transform-set esp-3des esp-md5-hmac raccess
Crypto ipsec transform-set esp-3des esp-sha-hmac vpnclienttrans
Crypto ipsec transform-set vpnclienttrans transport mode
life crypto ipsec security association seconds 2147483646
Crypto ipsec kilobytes of life security-association 2147483646
raccess 1 set transform-set vpnclienttrans crypto dyn1 dynamic-map
correspondence address card crypto mymap 10 110
card crypto mymap 10 peers set 10.254.17.10
card crypto mymap 10 transform-set RIGHT
correspondence address card crypto mymap 20 110
card crypto mymap 20 peers set 10.254.17.11
mymap 20 transform-set myset2 crypto card
card crypto mymap interface outside Baku
correspondence address card crypto ganja 10 110
10 ganja crypto map peer set 10.254.17.18
card crypto ganja 10 transform-set RIGHT
card crypto interface outside-Ganja ganja
correspondence address card crypto vpntest 20 110
peer set card crypto vpntest 20 10.250.25.1
newset vpntest 20 transform-set card crypto
card crypto vpntest interface vpnswc
vpnclientmap 30 card crypto ipsec-isakmp dynamic dyn1
card crypto interface for remote access vpnclientmap
Crypto ca trustpoint ASDM_TrustPoint0
registration auto
name of the object CN = gyd - asa .az .bct
sslvpnkeypair key pair
Configure CRL
map of crypto DefaultCertificateMap 10 ca certificate

crypto isakmp identity address
ISAKMP crypto enable vpnswc
ISAKMP crypto enable outside-Baku
ISAKMP crypto enable outside-Ganja
crypto ISAKMP enable remote access
ISAKMP crypto enable Interior-Bct
crypto ISAKMP policy 10
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 20
preshared authentication
aes encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 40
preshared authentication
aes encryption
sha hash
Group 2
life 86400
Crypto isakmp nat-traversal 30
No vpn-addr-assign aaa
Telnet timeout 5
SSH 192.168.0.0 255.255.255.0 Interior-Bct
SSH timeout 35
Console timeout 0
priority queue outside Baku
queue-limit 2046
TX-ring-limit 254
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
Server NTP 192.168.1.3
SSL encryption, 3des-sha1 rc4 - md5 aes128-sha1 sha1-aes256
SSL-trust point ASDM_TrustPoint0 to vpnlb-ip remote access
SSL-trust ASDM_TrustPoint0 remote access point
WebVPN
turn on remote access
SVC disk0:/anyconnect-win-2.4.1012-k9.pkg 1 image
enable SVC
tunnel-group-list activate
attributes of Group Policy DfltGrpPolicy
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
internal group ssl policy
attributes of group ssl policy
banner welcome to SW value
value of DNS-server 192.168.1.3
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
group-lock value SSL
WebVPN
value of the SPS URL-list
internal vpn group policy
attributes of vpn group policy
value of DNS-server 192.168.1.3
Protocol-tunnel-VPN IPSec l2tp ipsec
disable the PFS
BCT.AZ value by default-field
ssl VPN-group-strategy
WebVPN
value of the SPS URL-list
IPSec-attributes tunnel-group DefaultL2LGroup
ISAKMP retry threshold 20 keepalive 5
attributes global-tunnel-group DefaultRAGroup
raccess address pool
Group-RADIUS authentication server
Group Policy - by default-vpn
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared key *.
ISAKMP retry threshold 20 keepalive 5
IPSec-attributes tunnel-group DefaultWEBVPNGroup
ISAKMP retry threshold 20 keepalive 5
tunnel-group 10.254.17.10 type ipsec-l2l
IPSec-attributes tunnel-group 10.254.17.10
pre-shared key *.
ISAKMP retry threshold 20 keepalive 5
type SSL tunnel-group remote access
attributes global-group-tunnel SSL
ssl address pool
Authentication (remote access) LOCAL servers group
Group Policy - by default-ssl
certificate-use-set-name username
Group-tunnel SSL webvpn-attributes
enable SSL group-alias
Group-url https://85. *. *. * / activate
tunnel-group 10.254.17.18 type ipsec-l2l
IPSec-attributes tunnel-group 10.254.17.18
pre-shared key *.
ISAKMP retry threshold 20 keepalive 5
tunnel-group 10.254.17.11 type ipsec-l2l
IPSec-attributes tunnel-group 10.254.17.11
pre-shared key *.
ISAKMP retry threshold 20 keepalive 5
type tunnel-group DefaultSWITGroup remote access
attributes global-tunnel-group DefaultSWITGroup
raccess address pool
Group-RADIUS authentication server
Group Policy - by default-vpn
IPSec-attributes tunnel-group DefaultSWITGroup
pre-shared key *.
!
type of policy-card inspect dns migrated_dns_map_1
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the migrated_dns_map_1 dns
inspect the rsh
inspect the rtsp
inspect sqlnet
inspect sunrpc
inspect xdmcp
inspect the netbios
Review the ip options
class flow_export_cl
flow-export-type of event all the destination 192.168.1.27
class class by default
flow-export-type of event all the destination 192.168.1.27
Policy-map Voicepolicy
class voice
priority
The class data
police release 80000000
!
global service-policy global_policy
service-policy interface outside Baku Voicepolicy
context of prompt hostname

Cryptochecksum:4f35f975ba7a0c11f7f46dfd541d266f
: end
GYD - asa #.

ASA remote:
ASA Version 8.2 (3)
!
ciscoasa hostname
activate the encrypted password of XeY1QWHKPK75Y48j
2KFQnbNIdI.2KYOU encrypted passwd
names of
DNS-guard
!
interface Ethernet0/0
nameif inside
security-level 100
IP 192.168.80.14 255.255.255.0
!
interface Ethernet0/1
nameif outside
security-level 0
IP 10.254.17.11 255.255.255.248
!
interface Ethernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
Shutdown
nameif management
security-level 100
no ip address
management only
!
boot system Disk0: / asa823 - k8.bin
passive FTP mode
access-list 110 scope ip allow a whole
192.168.80.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.0.0 255.255.0.0
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
management of MTU 1500
Within 1500 MTU
no failover
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow all outside
ICMP allow any inside
ASDM image disk0: / asdm - 621.bin
don't allow no asdm history
ARP timeout 14400
NAT (inside) 0 access-list sheep
Route outside 0.0.0.0 0.0.0.0 10.254.17.9 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 192.168.1.0 255.255.255.0 management
http 192.168.80.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT
Crypto ipsec transform-set newset aes - esp esp-md5-hmac
Crypto ipsec transform-set esp-3des esp-sha-hmac myset2
life crypto ipsec security association seconds 2147483646
Crypto ipsec kilobytes of life security-association 2147483646
correspondence address card crypto mymap 10 110
card crypto mymap 10 peers set 10.254.17.9
mymap 10 transform-set myset2 crypto card
mymap outside crypto map interface
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 20
preshared authentication
aes encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 40
preshared authentication
aes encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN

tunnel-group 10.254.17.9 type ipsec-l2l
IPSec-attributes tunnel-group 10.254.17.9
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns migrated_dns_map_1
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the migrated_dns_map_1 dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname

Cryptochecksum:1c1ac60e2fb84f65269d15d53f27c21b
: end
ciscoasa # $

Still, I can't ping ASA remote outside from outside of the Local interface. And there is no connectivity between the 192.168.80.0 distance and local don't say 192.168.1.0. I have run out of ideas

Would appreciate any help. Thank you in advance...

If the tunnel is up (phase 1), but no traffic passing the best test is the following:

Add order management-access to the Interior , and then try to PING the intellectual property inside ASA counterpart.

inside x.x.x.x ping --> x.x.x.x is the IP of the ASA peer inside

The test above shows if the traffic passes through the tunnel (check encrypted/decrypted packets of sh cry ips its).

Test on both directions.

Please post the results.

Federico.

Site to Site VPN and remote access on PIX 6.3 (3)

Hello

I have a vpn site-to site to remote access configured on the pix device. Everything works like a charm until I decide to perform authentication of the local client for remote vpn clients using the same card encryption from site to site. Thus, the tunnel from site to site is broken because that is trying to authenticate the local user.

Is it possible to use the authentication of the remote local user for vpn clients on PIX without breaking other tunnels that use the same cryptomap?

If the answer is to use separate crypro card so how can I assign the other encryption to use outside of the interface card, if only a single encryption card can be assigned to any given interface?

When you configure the isakmp key, use the command

ISAKMP KeyString keys by the peer-address [mask netmask] [No.-xauth] [No.-config-mode]

No.-xauth will tell the isakmp won't the isakmp xauth for L2L and non-config-mode does not distribute the ip address of the peer L2L.

Let us know if it works

-Vikas

VPN site-to-site remote access

Similar Questions

Maybe you are looking for