VProtect do nothing for me but displays error messages

Similar Questions

• Serial number for Apple Watch displays error message on website coverage Checker every time I've tried?

  I bought a 38mm Rose Gold Apple Watch on eBay and it came not in its original box, but it looks like the charger cable is real. No USB no wall adapter socket, however.

  When I enter the serial number on https://checkcoverage.apple.com/gb/en/ it returns:

  "We're sorry, but we are unable to respond to your request at this time. Please try again later. »

  Watch came without any lock activation and seems to work perfectly...

  I have tried twice now, 3 days apart.

  Is this perhaps a non retail unit? Do they exist?

  Hello

  If you have not yet done so, you can try to add the watch to your profile support:

  https://supportprofile.Apple.com

  When successfully added, this also allows you to check the repairs and the coverage of the Service status by typing / clicking on the arrow to the right of the watch within the list of products.

  If you would rather contact Apple by phone, the UK support number is 0800 107 6285.

• A single application preventing the closure of the displayed error message...

  Hello

  When I closed my laptop, the displayed error message one application preventing closing down.

  as directed by your previous post, I have set up my laptop with it, but this problem yet and still occur.

  now the error message saying Windows host prevents your stop down.

  Please, help me to overcome this problem.

  Hi Regis,

  Thanks for posting your question on the Microsoft Community forums.

  I understand that you get the error message so that the closure of the system. However, I would like to know some more information on the issue to provide you with better assistance.

  1. Who is "previous post" you are talking about?
  2. What is the exact error message you get now on "Windows"host?
  3. You did it any significant hardware or change software on the computer before this problem?

  The question may arise if certain services (including background Windows services and other third-party application services) are still in operation when you try to shut down the computer.

  The applications or programs sometimes have ongoing services which are still ongoing even if you close your programs. Properties of an instance, there are many third party messengers that require you to sign in to use the application. Thus, when you close the application, the corresponding services are sometimes even functional whereby the program restarted in less time and log into the self-signed.

  Therefore, usually do not completely quit us some programs when we literally close them and so we get these guests. To diagnose the problem, you can restart the computer in safe mode when only minimal services are in use, you should not get these guests so that closing.

  If you do not get these guests in safe mode, you can also try to boot your system in a clean boot, a selective startup in the third that most of the services are disabled. To do this, you can consult the following link:

  How to perform a clean boot in Windows

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Hope this information is useful. Let us know if you need additional help on the issue, we will be happy to help you.

• The controller throws an OAException, but the error message does not appear

  I made a controller to add validation business customized to a specific region of a page of Iprocurement. The controller throws an exception, but the error message does not appear on the page.

  Why when the exception is thrown, the system do not stop the processing of the page and displays the error message?

  I do not know the controller is reached because the page through JDeveloper debugging.

  -PageLayout

  -stackLayout

  -subTabLayout <-my controller is located in this region

  SerializableAttribute public class AccountsDistsValidationCO extends

  {oracle.apps.fnd.framework.webui.OAControllerImpl}

  ' Public Sub processFormRequest (pageContext OAPageContext, OAWebBean webBean)

  {

  super.processFormRequest (pageContext, webBean);

  throw new OAException ("something just happned");

  }

  }

  I should to use the following to solve my problem

  pageContext.putDialogMessage (message);

  pageContext.forwardImmediatelyToCurrentPage (null, true, null);

  Reference:

  OAException.ERROR is not throwing the error

• Have an older iPad that I inherited. iOS is outdated but get error message when I try to update. Support instructions do not match my iPad. This was bought in 2011 I think.

  Have an older iPad that I inherited. iOS is outdated but get error message when I try to update. Support instructions do not match my iPad. This was bought in 2011 I think. I need help to remove the update one put it back.

  CBTEKRONY wrote:

  Have an older iPad that I inherited. iOS is outdated but get error message when I try to update. Support instructions do not match my iPad. This was bought in 2011 I think. I need help to remove the update one put it back.

  What is this error message that you receive? This would help a lot. From there, a person must be able to provide some additional troubleshooting steps.

• Mac OS 10.10.2 is installed and can open documents on my new Mac Air but an error message occurs, with, I try to attach a PDF file to emails.  Any thoughts?  Apple could not help.

  Mac OS 10.10.2 is installed and can open documents on my new Mac Air but an error message occurs when you try to attach a PDF file to emails.  Apple was not able to solve.  Any thoughts?

  It is not broken, just confused. The recipient must save the file and open it in Adobe Reader. Your e-mail application is not using Adobe Reader.

• Displays error message the problem report for this solution has been deleted or modified on the computer and is no longer available installation multifunction printer

  Original title: solve PC issues icon

  install your all-in-one printer driver, then click on it, then it will take you to a screen that indicates the problem report for this solution has been deleted or changed on this computer and is no longer available. But since it is presented as a problem, it's not going to disappear.

  Hello
  1. What is the brand and model of your computer and the printer?
  2 did you change on your computer before this problem?
  3. the printer is working correctly?

  4. are you clicking on a program from the printer or printer driver file?

  Look for error messages in the device to the printer driver manager.

  a. Click Start.

  (b) in the search box, type Device Manager.

  Follow the suggestions and see if it works very well.
  Method 1
  Check if the problem persists in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  Method 2
  You can uninstall and reinstall the printer and see if it works very well.
  Install a printer
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  See also:
  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

• Check invalid date and display error message for that forms 10 g or 12 c

  Hi all

  a text element text_fdate is of data type date mask and the format is dd/mm/rrrr

  In this text element that I want to display validation message "you have entered an incorrect date that does not exist.

  When the user enters an invalid date as 30/02/2016 which is not exists.

  What trigger I use and when.

  Florian wrote:

  Hey Hamid,

  GET_ITEM_PROPERTY ('ITEM_NAME', ITEM_IS_VALID);<--it is="" not="">

  Above will work only on the query mode.

  The code works, but the below error code you gave does not work in forms 12 c.

  1. IF ERROR_CODE = 50012 THEN
  2. MESSAGE ("Please enter the correct date.");
  3. MESSAGE ("Please enter the correct date.");
  4. END IF;

  The correct error code is 50004 12 c forms.

  Just change the ERROR_CODE of 50012 to 50004 and it will work.

  I'll check the error code in form 10g and will play with you again.

  I already checked and functional at 10g.

  Hamid

• Raise_application_error displaying error message not personalized

  I'm quite new to PL/SQL, and I have a problem with the display of my exceptions that I can't understand.

  I use two stored procedures and anonymous block to call them. I did some other procedures in this way and they all work very well.

  It is the first procedure that updates my table.

  create or replace procedure UPD_CUST_SALESYTD_IN_DB (pcustid number, pamt number) AS 
  err_pamt exception; 
  err_pcustid exception; 
  vcount number; 
  begin 
  select count(*) into vcount from customer where custid = pcustid;  
  
  if vcount = 0 then raise err_pcustid; 
  end if;  
  
  if pamt <-999.99 or pamt >999.99 then raise err_pamt; 
  end if;  
  
  update customer set sales_ytd = sales_ytd + pamt 
  where custid = pcustid;  
  
  exception 
  when err_pcustid then 
  RAISE_APPLICATION_ERROR(-20031, 'Customer ID not found'); 
  when err_pamt then 
  RAISE_APPLICATION_ERROR(-20032, 'Amount out of range'); 
  when others then 
  RAISE_APPLICATION_ERROR(-20000, SQLERRM); 
  end;  

  It is the procedure that calls the procedure above. It shows just what I'll do and confirms that it worked.

  create or replace procedure UPD_CUST_SALESYTD_VIASQLDEV (pcustid number, pamt number) AS 
  begin 
  dbms_output.put_line('--------------------------------------------'); 
  dbms_output.put_line('Updating SalesYTD. Customer Id: ' || pcustid || ' Amount: ' || pamt); 
  UPD_CUST_SALESYTD_IN_DB(pcustid, pamt); 
  commit; 
  dbms_output.put_line('Udpate OK'); 
  
  exception 
  when others then 
  RAISE_APPLICATION_ERROR(-20000, SQLERRM); 
  end;

  It is the anonymous block to call the procedure above, which then calls one I use.

  set serveroutput on; 
  begin 
  UPD_CUST_SALESYTD_VIASQLDEV(3,999.9); 
  end;

  If I pass parameters which would not give me an error, the code works fine.

  For example, if I input;

  set serveroutput on; 
  begin 
  upd_cust_salesytd_viasqldev(3,400); 
  end;

  I get the correct result and made the changes in the table.

  -------------------------------------------- 
  Updating SalesYTD. Customer Id: 3 Amount: 400 
  Udpate OK

  However, if I pass parameters that would result in an error, or a customer id doesn't exist does not, either the amount being out of reach, nothing happens. I get this:

  -------------------------------------------- 
  Updating SalesYTD. Customer Id: 3 Amount: 1000

  Nothing else.

  In similar procedures my exceptions work very well. This example uses a procedure that inserts into a table.

  -------------------------------------------- 
  Adding Customer. ID: 500  Name: Helen Nolan 
  ORA-20002: Customer ID out of range

  I don't know why this procedure is not at all my exceptions. In my other procedures that work, if an exception is thrown, the right output script in Oracle SQL Developer displays my exception.

  However, in my update procedure, if something should trigger an exception, over the lines of DBMS output, the output of the script prints this error report

  Error report - 
  ORA-20000: ORA-20032: Amount out of range ORA-06512: 
  at "S4931645.UPD_CUST_SALESYTD_VIASQLDEV", line 10 ORA-06512: 
  at line 2 20000. 00000 -  "%s" 
  *Cause:  The stored procedure 'raise_application_error' was called which causes this error to be generated. 
  *Action:  Correct the problem as described in the error message or contact the application administrator or DBA for more information.

  So he is grateful he my exception was raised, but it has not been demonstrated.

  Any help is greatly appreciated, I am completely confused by this. I have a really obvious mistake?

  Your logic and exception management is wrong.

  (a) make a count to determine the existence of a record prior to an update on this subject is wrong.  If the record is deleted by another user inbetween you your county and the update, then you can try and update a record that no longer exists.

  (b) while other exceptions are to be avoided - only handle exceptions, you expect to be raised.

  (c) update a record will set the SQL % ROWCOUNT pseudo variable, which should be checked immediately after the statement and used to determine if the record exists or not...

  create or replace procedure UPD_CUST_SALESYTD_IN_DB (number pcustid, number of ALMPs) AS
  err_pamt exception;
  err_pcustid exception;
  Start
  If abs (ALMPs) > 999.99 then
  raise err_pamt;
  end if;

  customer update
  Set sales_ytd = sales_ytd + ALMPs
  where custid = pcustid;

  If rowcount % sql = 0 then
  raise err_pcustid;
  exception
  / * Business Logic Exceptions * /.
  When err_pcustid then
  RAISE_APPLICATION_ERROR (-20031, "Customer ID not found");
  When err_pamt then
  RAISE_APPLICATION_ERROR (-20032, 'Amount out of reach');
  -Deletion of STUPID WHEN OTHERS Manager of exceptions that masks the true exceptions
  -while others then
  -RAISE_APPLICATION_ERROR(-20000, SQLERRM);
  end;

• cftry / cfcatch do not display error message

  I'm trying to display an error message when a user selects incorrectly two elements. But the message does not appear. Please let me know what I am doing wrong. On the page of the form, the user selects couse them and types in their identification. If the ID and classes are not already in the same table in the database, they should then be invited to try again. Here is my code
  
  < cftry >
  < cfquery name = "all" datasource = "hr1" >
  Select EMPLID, COURSE_TITLE
  Training
  WHERE EMPLID ='#FORM. EMPLOYID #'
  And as COURSE_TITLE ' #FORM. CLASS #% '
  < / cfquery >
  
  < cfcatch type = "any" >
  <!--> the message to display
  < cfoutput > we do not show you enrolled in this course, please select another < / cfoutput >
  
  < / cfcatch >
  < / cftry >
  

  Thanks for all the help. I found another solution in another forum. Since fails it to query is not complete a registration account. I had to go back to the CFTry and return the query. This code works-

  
  
  Select EMPLID, COURSE_TITLE
  Training
  WHERE EMPLID ='#FORM. EMPLOYID #'
  And as COURSE_TITLE ' #FORM. CLASS #% '
  
  
  
  
  

  Then using the recordcount function it generates the correct answer

  
  
  #form.employID # wishes to withdraw the course #COURSE_TITLE #.
  You have chosen to cancel the registration of #COURSE_TITLE #. An email was sent to your supervisor.
  
  Our records do not show whether you are enrolled in this course. Please select another.
  
  

• Try to install FLAC Frontend in Windows 7 64 bit, but get error message

  Hello

  Tried to install FLAC Frontend but get this error message...

  The Module MSCOMCT2. OCX was loaded but the call to DllRagisterServer failed with the error 0x8002801c code.

  I looked online and saw tips for Vista that said to try to run Setup in administrator mode.  I tried and failed with error

  The module MSCOMCT2. OCX was not able to load. Make sure the binary is stored at the specified location or debug it to check for problems with the binary files or dependent.dll.  The module is not found.

  Seen elsewhere on run CMD in administrator mode and typing in what follows - regsvr32 \windows\system32\MSCOMCT2. OCX - hit enter, but I get the same error message as I do run the installer in administrator mode.

  I see some online have got it working using the method above, but it could be that I'm not because it is a 64-bit Windows 7 installation?

  The file can be found here

  http://members.home.nl/w.Speek/FLAC.htm

  This was taken from another forum to help. This solution is simple and works.

  > The only thing that has solved this problem for me installs the following:

  >>

  http://www.Ascentive.com/support/New/libraryfiles.exe

  >>

  > treadmill Syswow64, not the System32.

  WHEN THERE YOU ASK WHERE YOU WANT TO INSTALL THE FILES

  REPLACE "System32" with "SysWOW64".
  

  Install FLAC Frontend and it will load smoothly.

  Enjoy and enough bickering. Moderators, please be more useful than a verification of the compatibility lists and say ' well, if she's not here, then go the manufacturer! That is poor it helps and is to say "We will NOT help you."

• You try to run Cyberlink downloader to install updates Power DVD but the error message: visual c ++ error library time time to run

  Two days ago, I try to run cyberlink downloader to install the latest update for power dvd (compatible with win 8) .but every time appear the error message: visual c ++ run time time library sleeves application error - the requested to terminate it in an unusual way.what can do? I have the problem with the update.the only specific support has me unistal all visual c ++ redistributable, reinstall program.but had tried the remain.i problem and the security mode.any solution please?  I have win 7 x 64

  Hello

  You can get this error because of things:

  1. The Visual C++ library runtime components are missing. (You should of reinstalled after remove them because this software requires their)
  2. A problem with this software, it is possible a conflict with another software.

  If the problem is caused by #1, you can reinstall the latest version of the Visual C++ Library Runtime components and see if it solves the problem, but I do not know what version of the redistributable software requires.

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=14632

  There is also a 2012 version of the Redistributable:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30679

• installation is stuck but no error message

  downloaded elements photo shop 13, am now install but is stuck at 55% for more than an hour without error message.

  Open your activity monitor (mac) or the (win) Task Manager and end a hanging process adobe (adobe help process search for esp).

• Current version of Flash installed CC, but get error message asking a newer version?

  Last download Flash Professional CC, I am trying to install the Toolbox for CreateJS, but get the following error:

  "This extension cannot be installed, it requires a Flash version to inclusive between 12 and 12.

  I have installed all the current versions of Flash Professional CC, CC Adobe Extension Manager and the CC itself. Restarted the computer and installed all the updates that it finds. I have the latest versions of the applications, but I still get the error above - what I can do?

  Thanks for your help!

  ToolKit for CreateJS is already part of the installation of Flash Pro CC. You don't have to re - install this.

  It is available for windows-> Toolkit for menu CreateJS

  -Reynaud

• Codes for the AIR installer error message

  Hello, once again,

  I found an article of the code small mistake for update of the player, so I know that it is a common practice to provide error notice.

  Where to find a list of error messages for installation of Adobe AIR on Mac OS platform? I saw the error 7 or 8 for the test early on, if I remember correctly.

  This will help us produce the best comment of the error to the user in case the AIR settles.

  Thank you

  They are in our doc of redistribution, you can get access to once you fill in the following form: Adobe AIR Runtime Distribution

  Here is the table of exit codes:

  Installer exit codes

  The Adobe AIR installer generates the following exit codes:

  Exit code	Description
  0	Successful installation
  1	Success, but the reboot required for completion
  2	User error (incorrect arguments)
  3	Term not found
  4	Failed loading of runtime
  5	Unknown error
  6	Installation cancelled
  7	Failed installation
  8	Setup has failed; update already in progress
  9	Setup has failed; application already installed

  As you will notice, the exit code 7 is really just a "catch-all" and not particularly useful.  It may also be useful to refer to the runtime error codes from time to time.  You will find them here: execution errors

  Thank you

  Chris