vRealize Client Cloud in scripts?

Similar Questions

• Complete the VI Client with PowerCLI Script idle Sessions

  Hello gurus PowerCLI

  I searched the net for a script PowerCLI that would end all the VI client sessions that have been inactive for x period of time.  I found a post on the forums of VMware (http://communities.vmware.com/message/914858?z=zI0r8n) but had no luck with it.  I also found a script created by A.Mikkelsen, to http://www.amikkelsen.com/?p=384 , but that one does not work either.

  Here's the actual script by A.Mikkelsen that is based on code by LucD in the forum mentioned previously.

  BEGINNING

  ##################################################################################
  # The script terminates all sessions if idle idle user for more than xx #.
  #                             #
  # Created by: Anders Mikkelsen, 2010 #.
  ##################################################################################
  Claire
  # Add - PSSnapin VMware.VimAutomation.Core

  # $server = "vcenter server.
  # $user = "vcenter username.
  # $pwd = "password of vcenter.

  # Add 1 extra hour when, due to the difference of timestamp between MSSQL and Windows.
  # slow down time 5 hours = 360
  # 10 hours slowed = 660
  $intOlderThan = 60

  # Connect-VIServer $server - user $user-password $pwd
  # Connect-VIServer $server

  $svcRef = new-object VMware.Vim.ManagedObjectReference
  $svcRef.Type = 'ServiceInstance.
  $svcRef.Value = 'ServiceInstance.
  $serviceInstance = get-views $svcRef

  $sessMgr = get-view $serviceInstance.Content.sessionManager
  $oldSessions = @)
  {foreach ($sess in $sessMgr.SessionList)}
  If (($sess.)) (LastActiveTime) .addminutes ($intOlderThan) - lt (Get-Date)) {}
  $oldSessions += $sess. Key
  #write "$($sess.)". User name)'
  }
  }

  # Session terminal that are inactive for more than approved ($intOlderThan)
  $sessMgr.TerminateSession ($oldSessions)

  Disconnect-VIServer *-confirm: $false

  END

  The error message I get is:

  BEGINNING

  Exception calling 'TerminateSession' with '1' or the arguments: "it was not correct to specified parameters.

  "

  D:\Scripts\vc_terminate_idle_sessions.ps1:36 char: 26

  + $sessMgr.TerminateSession < < < < ($oldSessions)

  + CategoryInfo: NotSpecified: (:)) [], MethodInvocationException)

  + FullyQualifiedErrorId: DotNetMethodException

  END

  I should mention that my knowledge of PowerCLI is almost nothing, so any help in tweaking this script to make it work with PowerCLI 5.1 Release 2 and VC 5 U2 would be much appreciated.

  The error is caused by the fact that you are trying to kill your own session (if it was started long time ago).

  Apparently in vSphere 5. they included a security mechanism integrated to avoid this.

  You can take this by adding a simple test.

  ## max number of idle minutes for sessions to keep$intOlderThan = 60$serviceInstance = Get-View 'ServiceInstance'## get the session manager object$sessMgr = Get-View $serviceInstance.Content.sessionManager## array to hold info about stale sessions$oldSessions = @()foreach ($sess in $sessMgr.SessionList){    if (($sess.LastActiveTime).addminutes($intOlderThan) -lt (Get-Date) -and          $sess.Key -ne $sessMgr.CurrentSession.Key){        $oldSessions += $sess.Key    } ## end if} ## end foreach
  
  ## if there are any old sessions, terminate them; else, just write message to the Warning streamif (($oldSessions | Measure-Object).Count -gt 0) {    ## Terminate sessions than are idle for longer than approved ($intOlderThan)    $sessMgr.TerminateSession($oldSessions)} ## end ifelse {Write-Warning "No sessions that have been idle for more than '$intOlderThan' minutes; no action taken"}
  

• Problem with script OnConnect Portal WEBVPN AnyConnect

  I have a minor problem

  customer is 2.5.0217

  OnConnect script works great by the client anyconnect however if I use the web front-end ssl to launch the client anyconnect onconnect script does not run. Is it possible to have onconnect and ondisconnect scripts to run if the anyconnect client is launched as part of the webvpn.

  I searched high and low, but without success. Help or ideas would be greatly appreciated.

  Thank you

  Hello

  According to my understanding of the issue, I see that the script does not run when Anyconnect is launched using the portal.

  It may be related to a difficulty finding profiles sometimes.

  This is usually the result of not having a hostname and hostaddress configured in the existing profile. I think it is perhaps a good idea to add

  these values to your existing profile so we land on the right xml profile the first time.
  
  Try to add the host entry as  with fqdn of ASA.
  And let me know if it helps.
  For clearing up the credentials in the dialog box when using AnyConnect I found one of the bug:-
  CSCsx76993
  
  

  Symptom:

  User credentials are cached in the preferences.xml file when you use the Anyconnect client.  So when they revive Anyconnect, the user name is displayed in the client.

  Conditions:

  You can see all the client anyconnect.  It is a configurable option in the IPSec client.

  Workaround solution:

  Currently there is no work around

  And I can see it resolved in 2.4.202 however, I'm not sure if its fixed in 2.5 also. For this I would like to hear from others.

  Kind regards

  Shilpa

• EPMA Batch Client import failed

  Hi all

  We have a planning application which is EPMA and we have implemented of scripts to automate the loading of files of ADS using EPMA Batch client. WEA re do this as part of our 11.1.2.2 migration towards 11.1.2.3

  11.1.2.2, we have all the components of EPMA installed on a server but 11.1.2.3 we EPMA distributed on 2 servers services

  EPMA, planning installed in PRDPLN001 and we see lot-client installed in PRDFND001 where most of the Services of the Foundation is installed

  We have scripts in PRDFND001 server and we get the below error

  2015-04-20 04:52:57, INFO coming out with return code 407 - 420 run import Failed

  2015-04-20 04:52:57, 422-thank you for the INFO using EPMA Batch Client!

  This is the step where it fails

  Set bpmaserverurl ='http: /PRDPLN001/hyperion-bpma-server';

  set workspaceurl =' http:// PRDFND001 : 19091/awb /';

  Run the import Parameters (profilename, filename, importtype, waitforcompletion) Values ('flatfile', 'TEST_BU', 'E:\InboundFiles\HYP_BU_EXPORT.ads','true');

  quit smoking;

  However, we are able to succeed the 'Validation' and the 'deployment '.

  What could be the possible reasons for the error

  Concerning

  Amarnath

  Just for everyone. I solved the problem

  In fact, I forgot to mention the error I wanted to come earlier. Apologies for this

  2015-04-21 10:23:02, 829 ERROR java.io.IOException: the system cannot find the path specified

  We have a batch separately script that calls the script mentioned above (according to the original post) and it looks like below before (not working version) and after (after a change of work)

  Front - Batch file

  off @echo

  echo % date of BU_LOAD: ~ 10% date: ~ 4, 2% date: ~ 7, 2%

  Set resultfile=ResultFile_BU_%date:~10%%date:~4,2%%date:~7,2%.txt

  E:\QA\Oracle\Middleware\EPMSystem11R1\products\Foundation\BPMA\EPMABatchClient\epma-batch-client.bat-CE:\Scripts\DIM_LOAD\TEST\TEST_BU_LOAD_ADS.txt-R"E:\Scripts\DIM_LOAD\Log\%resultfile%' - STrue

  CD /.

  Front - EPMA Script file

  Set bpmaserverurl ='http: / PRDPLN001/hyperion-bpma-server ";

  "Set workspaceurl ='http://PRDFND001:19000 / working space."

  login username, password;

  Run the import Parameters (profilename, filename, importtype, waitforcompletion) Values ('flatfile', 'TEST_BU', 'E:\InboundFiles\HYP_BU_EXPORT.ads','true');

  quit smoking;

  After

  off @echo

  echo % date of BU_LOAD: ~ 10% date: ~ 4, 2% date: ~ 7, 2%

  Set resultfile=ResultFile_BU_%date:~10%%date:~4,2%%date:~7,2%.txt

  CD ' E:\InboundFiles

  E:\QA\Oracle\Middleware\EPMSystem11R1\products\Foundation\BPMA\EPMABatchClient\epma-batch-client.bat-CE:\Scripts\DIM_LOAD\TEST\TEST_BU_LOAD_ADS.txt-R"E:\Scripts\DIM_LOAD\Log\%resultfile%' - STrue

  CD /.

  After - EPMA Script file

  Set bpmaserverurl ='http: / PRDPLN001/hyperion-bpma-server ";

  Set workspaceurl = "http://PRDFND00119000/workspace";

  login username, password;

  Run the import Parameters (profilename, filename, importtype, waitforcompletion) Values ('flatfile', 'TEST_BU', 'HYP_BU_EXPORT.ads', 'true');

  quit smoking;

  I've done below to solve the problem

  As the EPMABatch was not able to identify the location/path of the file ADS. I gave a CD command to go to the inboundfiles directory and called the EPMABatch directly from there, giving the file name directly. This time the file got loaded without any problems

  Not sure why it is not able to identify / detect the full path of the file. It worked very well in 11.1.2.2 version though. He had to dig to find the reason for the question

  Concerning

  Amarnath

• Custom calculation of LOAD FDQM script - adapter ESSBASE

  Hello world

  I am trying to modify the Essbase adapter default LOAD script, I entered the year to avoid the deletion of the data for all months of the year. Now I want to add another dimension, a custom8 (UD8) in the script in order to avoide compensation all data in custom8 ESSBASE dimension.i want just to filter the data on compensation for the value in the dimension custom8.

  This is the part to LOAD a script that I modified to add the year:

  If strEntity <>strCurEnt or bolFirstLine = RES. So FDMTrue

  If Len (strCurEnt) > 0 Then

  strTYear = API. . StrTargetYear of POVMgr.fPeriodKey (strPer (0))

  ' * CALC SCRIPT *.

  ' NOTE: CALC SCRIPT CAN BE MODIFIED FOR EACH CLIENT

  "This script was changed to also include the year.

  ' Clear the intersection of (year, category, period, entity).

  (strClear = «Difficulté ("") "& strTYear &" "" "," "" "& strTCat &" "" ", @Idescendants (" "" & strCurEnt & "" ")) ' & +" \n "

  strClear = strClear & "CLEARDATA" "" "& strTPer (0) &" "";"& vbcrlf".

  strClear = strClear & "EndFix".

  '***************************************************************************

  What should I add to increase the intersection to custom8 dimension?

  Regars,

  Savo

  Ok

  If you still have the same value, your solution is even easier.

  You need the performance to VR0 at the beginning of the CORRECTION or the end.

  Give it a try and let us know.

  strCust8 = "VR0.

  ' * CALC SCRIPT *.

  ' NOTE: CALC SCRIPT CAN BE MODIFIED FOR EACH CLIENT

  "This script was changed to also include the year.

  ' Clear the intersection of (year, category, period, entity).

  (strClear = «Difficulté ("") "& strCust8 &" "" "," "" "& strTYear &" "" "," "" "& strTCat &" "" ", @Idescendants (" "" & strCurEnt & "" ")) ' & +" \n "

  strClear = strClear & "CLEARDATA" "" "& strTPer (0) &"""; ' & + "\n"

  strClear = strClear & "EndFix".

  '***************************************************************************

• ready images linux cloud on VIO2 + NSX

  I uploaded 3 images official ready cloud QCOW2 format:

  - cirros -> I have ping instance. I can ssh with cirros:cubswin :) | I can ssh with a key pair

  - true ubuntu -> I can ping instance. I can't ssh! | I can't ssh with a key pair

  - centos7 / rhel7 -> I can't ping instance. I can't ssh | I can't ssh with a key pair

  is a VIO problem?

  PS with windows or with my own images linux I have no problem

  Finally, I managed to find the problem and the solution!

  -J' guestfish used to set a root password (change the password for the download of qcow2 RHEL 7 kvm (links updated 07/02/2015) - Red Hat customer portal) and disable the cloud-init to lock the root account in /etc/cloud/cloud.cfg (reverse the first 2 params)

  -I converted qcow2, vmdk with qemu-img image and I created a new virtual machine with VMware Workstation

  -Now I'm be able to connect with the root account

  -J' noticed that network has declined and this is the real problem, the network (ip address) was eno16777728 instead of eth0! So I changed the network script

  DHCP is now functional and net is UP!

  The real problem is therefore in the hypervisor driver? No doubt these images are made with KVM and network driver is different?

  PS

  -My MTU problem remains, but I solved for now setting MTU = 1450 in the virtual machine

  -a cloud-init script can be done to make this change when launching official instance of centos

• Automation of Cloud creative package

  Is it possible for the creative cloud Packer script to automate the creation and update of packages via the command line?

  Packer links https://forums.adobe.com/thread/1586021

  http://forums.Adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent

  Creator of Enterprise Cloud https://forums.adobe.com/thread/1489872 License Restrictions

• How can I set the Script of customization for all virtual machines in a paralytic

  By using the. ExtensionData method found here: http://communities.vmware.com/thread/392462?start=0 & tstart = 0 (thanks alanrenouf)

  I am able to identify a few comments properties via PowerCLI adjustments.

  My question is how to set the value of CustomizationScript with a client cust simple script?

  Is it possible to store it in a $variable?

  Sample script that I first:

  off @echo

  If "% 1" == "precustomization")

  tasks precustomization echo

  ) ElseIf '%1% ' == 'postcustomization')

  cmd /c schtasks.exe/change /TN "\Microsoft\Windows\Defrag\ScheduledDefrag" /Disable

  )

  Thanks for the help.

  Answered by tests.  It's the double quotes.

  $civapp = get-CIVApp TEST

  $script =

  "@echo off".

  If "" %1% "" is "" precustomization"")

  tasks precustomization echo

  ) ElseIf "" %1% "" == "" postcustomization"")

  cmd /c schtasks.exe/change /TN "" \Microsoft\Windows\Defrag\ScheduledDefrag"" /Disable

  )"

  Foreach ($civm to ($civApp |)) Get - CIVM)) {}

  $GuestCustomization = $civm. ExtensionData.Section | Where {$_.} {GetType () - like "* GuestCustomizationSection"}

  $GuestCustomization.Enabled = $true

  $GuestCustomization.ChangeSid = $false

  $GuestCustomization.ResetPasswordRequired = $false

  $GuestCustomization.CustomizationScript = $script

  $GuestCustomization.UpdateServerData)

  }

  Post edited by: jgreenback

• perl script does not follow the specification sdk?

  Hello

  I'm trying to customize the perl script to retrieve specific information, I need. I'm currently dipping in the specification of the sdk, and something seems strange to me. I can read that:

  A vSphere API client application begins by connecting to a server and obtaining a reference 
  to the ServiceInstance. The client can then use the RetrieveServiceContent method to gain
  access to the various vSphere manager entities and to the root folder of the inventory.
  

  ()http://www.vmware.com/support/developer/vc-sdk/visdk41pubs/ApiReference/vim.ServiceInstance.html( )

  I considered my perl as a client vSphere API script, so I looked for the "ServiceInstance" model in my perl scripts, but only two uses this object... All others have information without using the ServiceInstance... So this last one so useful? (If so, what is for?)

  About the RetrieveServiceContent it is never even used...

  Can someone explain to me my failure?

  Also, I wonder how to get the ServiceInstance.

  It is done when you call Util::connect() (which calls the function of connection).

  Once you have successfully logged in, you can get the ServiceContent object by calling Vim::get_service_content ().  If you enable HTTP mode and capture the SOAP envelopes, you would see the RetrieveServiceContent call.  A non-script, such as Java, C++, gross SOAP SDK, SDK etc., you would have to appeal, set up a sessionId cookie and make a connection in this sessionId cookie to perform most of the duties against the VIM SDK.

  In the Perl SDK you can proceed as follows if you want the ServiceContent (and references the number of objects in the inventory of management):

  $sc = Vim::get_service_content();

  print $sc--> on-> fullName. "\n";

  My $rootFolderMOR = $sc-> rootFolder;

  Also, if I remember correctly, views of the object will be the ServiceContent & Vim as a property in the data of the object.

  print $vm_view-> {'vim'}-> {'service_content'}-> {'about'}-> {'fullName'}. "\n";

  Since the ServiceInstance is worth MOREF regardless, usually you just create a ManagedObjectReference directly and use it as a parameter to RetrieveServiceContent.

  My $ServiceInstance = ManagedObjectReference-> new (type => 'ServiceInstance', value => "ServiceInstance");

  My $ServiceContent = Vim::RetrieveServiceContent (_C-online $ServiceInstance);

  # ... Then, called connection...

  $ServiceContent-> connection (_C-online $ServiceContent-> sessionManager, username-$username password-online $password online);

  In fact, if you look at the login()) function in VICommon.pm in the Perl SDK, you will see that this is exactly the same process (with a different code to handle SDK versions and others).

• CloudClient - change of lease / expiration

  I use CloudClient 3.4 against vCAC 6.1.1

  I have several machines that I need to change the lease.  I worked my way up to understand that the command I need to run is:

  VRA provisioneditem action run - da813a6e-af7a-46b7-a528-36f092c40c8a--action id 'Lease change' - properties "expires = MM/DD/YY"

  When I run this command, I get:

  CloudClient > vra provisioneditem action run - da813a6e-af7a-46b7-a528-36f092c40c8a--action id 'Lease change' - properties ' Expires = 01/02/2016 ".

  Error: The input provided resulted in a REST exception: unknown field: expires. The HTTP status is 400 - BAD_REQUEST.

  I need help with what put behind - properties.  Which player (s) lease expiry accessories?

  1. What should I put in the field of the properties?  (Name of property?  Is there a certain format of date?)
  2. Can I place more than one machine via a single command?  I guess I'd be separated by commas them and wrap everything in quotes?
  3. Am that I on the right track here?

  Thank you!

  OK... so a bunch here.

  Well you use Cloud Client for one, but here's more information to help you in your thoughts and your processes.

  1. If you don't know how already, be sure to know how to use Firebug or Chrome Tools (F12) to capture a request in the vRA. This gives you postData it for the makeRequest, which tells you exactly how the property keys are defined.  (for the most part... There is an exception with a couple of those who are 'number' format...) "I think that memory was one of them.)

  

  2 since you have Cloud customer, you can actually GET requests that have already been made and see what looked like the demand... (you can get the ID of the request of vRO inventory, a client of cloud list, the capture of makeRequest above and other means)

  CloudClient > details request of vra - id 'a06a45da-cf76-4e67-9e23-b1e2dce11922 '.

  

  Attention with the machineID, it isn't really the right one for the "resource" put into service... for this we need of the resourceRef.id (which can also be seen in the application).  You will find that all the provider part of the application are essentially the part of the query properties, but many of them are provided by default.  The only one you must satisfy to this call to action is provider-ExpirationDate.

  3. with the resourceRef.id, you can get the list of actions that you can perform with your account rights.  And with the ID of the action and the resource ID, you can get the fields, he expects.

  

  

  4. now, knowing the format (using several different ways), we can present a good set of properties at our request.

  

  So, at least it's the idea behind all this.  Unfortunately for me... I always use 3.3.1 (but will move 3.4 soon) and there are bugs on the recall of the request for default date values and Action of modification of lease.  It will probably work for you.  I change lease a lot differently as I wrapped an application of ASD around it.  I would like to use Cloud customer to call my application of ASD.  (which works as I take all the strings and make my type in the workflow conversion.)

  And this brings me to this...

  > Can I pass more than one machine via a single command?  I guess I'd be separated by commas them and wrap everything in quotes?

  Nope.  But you can have a flow work vRO iterative (and asynchronously) called a change in Client Cloud by machine lease.  So you can have an array of machines, selected by the user or another (if you have ASD), and run the lease change on each machine in the table programmatically.  Actually to make * a successful thing *, but do it several times to apply. (Edit: or you could send a list of machines in a shell script and iterative browse each, but I would steer you away from this type of methodology if I could... preferring to settle the iteration of the orchestration in vRO.)

  >>>3. Am that I on the right track here?

  Absolutely!  You're onto something impressive and it should bring you a lot of success.  (with, of course, some of the struggles and frustrations... but that is life in the technology, I guess)

  Keep at it and share what you find!

• High Availalability (Clustering) for server of vCO

  Hi all

  I'm looking for a high Availalability for the vCO server solution.  I found the site of vcoteam.info "http://www.vcoteam.info/learn-vco/take-cloud-automation-scripting-to-another-level-with-cloud-orchestration.html" designating the States 'vCO can fail over to another server of vCO and restore.

  Is this correct?  If Yes, where can I find more information or documentation on how to set up?

  Thank you!

  What I saw implemented at clients is:

  1.1 vCenter Orchestrator implemented high availability

  VCenter Orchestrator highly available the first thing to be implemented is a replication of databases multimaster or master slave. As long as a copy of the database is available a vCenter Orchestrator Application Server with the appropriate configuration can continue operations workflow. Best practices of the specific database to the seller must be followed to implement high-availability database.

  1.1.1 the active-passive node configuration

  Also called cold reserve. Provides a fully redundant instance of each node, which is only available online when its associated primary node fails.

  This is the configuration that suits the better vCenter Orchestrator. A third-party application of cluster can be configured to check the availability of the server (for example with the web monitoring service) and failing to stop the head node and start one of the secondary nodes.

  For this, all having the vCenter Orchestrator Application servers with the same plug-ins installed and in addition to the IP address to use the same configuration.

  This can be done with container each node maintains its own copy of the cluster configuration data. The configuration on the nodes can be initially defined using the vCenter Orchestrator configuration Ajax and exported manually to other nodes, and then they change configuration updated with scripts of replication of files on the \app-server\server\vmo\plugins \app-server\server\vmo\conf and directories.

  Christophe.

• Someone understands technology "Deduplication"?

  Hi people,

  I ask this question here because I agree with a company of Cloud backup and am unable to get a satisfactory response from their support or their product Forum - in fact they won't even after my question on the forum (must be approved by the moderator).

  I have a problem with the Client-Cloud/Backup software, it keeps running "integrity checks", 'fixing' of data errors and re - running and to find more/same mistakes ad infinitum.

  If I re - install the client software and the nature of the companys cloud system I can't re-synchronization with the existing backup. -J' I download all of the backup from scratch once again.
  When I studied this problem on their forum, I found mention of 'the' file de-duplication technology. -The moderator suggested/said a poster who was complaining about the same question (re - download backups because you can not re - connect to an existing backup) of duplicaton technology would make a re-upload later seem a lot more quickly.

  Hmmmm think I, which doesn't seem wise, - surely if their server uses deduplication technology (that I understand to be a way to eliminate duplication of files on their storage system to save space) and THEN... He must have a complete copy of the file to compare with? or in other words, we must always load your entire backup?

  The substance of my question is the following:-"deduplication" takes place on your computer (i.e. in the client software) or on the server where the storage / hard drive space is located. ?

  The Cloud company cannot or will not answer this...
  does anyone here know?

  Hi Nicolas,.

  The question you have posted is better suited for Windows 8 IT Pro category in the TechNet Forum. Post the question on the link provided below for assistance.

  Windows 8 IT Pro

  http://social.technet.Microsoft.com/forums/en-us/category/w8itpro

• Field of ASD and owner

  On the integrated IAAS, application form he is an owner field that allows you to search for other users, and to assign the property to them.  Someone at - he found a way to get something like that on a form of ASD?  I was originally hoping I could use the built-in field 'A' prayed for and then simply select the user of the we name of in the top of the catalog, but that doesn't seem to have shot in the form of ASD.  So now I'm trying to reproduce the owner field of the form IAAS to write on my form of ASD.  Thanks for any info.

  Mike

  Sure...

  You have the AD plugin? How will you use the owner in the actual application of ASD?  (he is owner of a chain or an owner of the AD object)

  I have found that the best way (actually better than the built-in mechanism) to search for users, is to have two fields.  A search box and a selector field of results.

  I think that it is better, even if it is two fields, is that you can customize the results but you want to watch them. (and you can filter, etc.)

  Create an action that takes an input for the search string and returns the values found in research as an array of strings.  The selections of the user is the one who crosses in the request form.

  Example of

  Field of search term

  --------------------

  Sean

  --------------------

  Field selector

  ------------------

  Sean Kohler ([email protected])

  Sean Smith ([email protected])

  ------------------

  If the search term can be an account or a name if it goes into action and uses the plugin AD search function.  An array of strings is returned, and in action, you can reformat the string back in an easy to use format.  Then when the correct Name is selected and the request is filed, cut you right on the () to get the real ID for use in your implementation process.  (for example, the workflow to request a catalogue... article or better yet a call to client cloud as the user - requestedFor)

  I would like to know if it's confusing.  I can give you some more concrete examples... but I have to log in the work to do, and I want to be lazy.

• Failure of Get - Org on Win 8.1 PS 4.0

  
  
  I have a v-apps on the cloud deployment script, but on Windows 8.1 with 4.0 PowerShell Get-OrgVcd fails. It returns nothing while on Win7 with Powersehll 3.0, it returns the org.
  
  does anyone have a work around or know of a fix?
  
  PowerShell PowerCLi 5.5 4.0 - it can be reproduced pretty easy, connect you to the cloud server and try to get out of the org.
  
  $org = get-OrgVCD-name "OrgName.
  
  $org will be nothing.
  
  64 bit OS.
  

  Hello

  the problem is reproducible in Powershell_ISE only. In the PS Console everything works fine. The reason is how .NET treats string URL. Powershell_ISE is built for .NET version 4.5 and it the URL strings differently breaks name filtering VCD features cmdlets. There is a bug filed that we will fix it for the next release PowerCLI.

  To work around the problem, you can run your PowerShell Console scripts.

  Kind regards

  Dimitar Milov

• Can I use my subscription on more than one PC?

  Can I download and install the Client Cloud on several PCs, if we are a Subscriber?
  About to buy a new computer and I want to use it on this system...

  There is no need in fact even to remove it.  just disconnect your cc on a computer desktop app and will release you to connect to another computer.

  I have 3 computers I use cc on (but, as mentioned, I can only be logged in on, at most, two at a time).

  the best part is, if you forget to logout (what happens to me when I go on vacation and take my cell phone after forgetting to logout on my computers at home and work), when you try to log on the computer 3, adobe allows you to disconnect from the other two using this 3rd computer.  so, instead of getting to the airport and curse me for forgetting to logout, I just take care of this with my laptop and I can continue to use my adobe programs so that on vacation.  very nice Adobe, IMO.