vROPS number of certificate trust remains Java API?

Similar Questions

• Re: HTTPS and certificate trust

  Hello everyone. I read a lot of posts in this forum on the theme of the HTTPS and I think I understand the different ways to obtain certificates on a device to avoid the message "you are trying to open a secure connection, but the server certificate is not approved.".

  My question is whether it is possible for an application to trust all certificates via APIs, in order to avoid the certificate trust whole-problem?

  In Windows Mobile and iPhone OS, you can override the logic of acceptance of certificate in the API so that an application trusted all certificates. This is useful in cases where an application needs to connect only to a private server. Is it possible in sib to override the logic of certificate, or certificate statement stuff above, outside of the app? (More precisely, I'm just using a simple object of HttpConnection MDS etc..)

  Thank you!

  -Tom B.

  There is no API that allows you to trust a certificate.  This must be done by the user or the administrator of the BlackBerry Enterprise Server.

• The gateway configuration GemFire 7.0.1 via Java APIs is unable to successfully deploy

  I followed the instructions here: (WAN) multi-site Configuration.

  I have been unable to deploy a gateway and according to me, Miss me him a little bit of configuration, but I can't identify what it is.

  # loc1.properties
  jmx-manager-port=1899
  mcast-port=0
  remote-locators=localhost[11045]
  
  
  
  distributed-system-id=1
  

  gfsh start locator - name = loc1 - port = 11044 - properties-file = loc1.properties

  # loc2.properties
  jmx-manager-port=1999
  mcast-port=0
  remote-locators=localhost[11044]
  
  
  
  distributed-system-id=2
  

  gfsh start locator - name = loc2 - port = 11045 - properties-file = loc2.properties

  String license = "== omitted valid WAN enabled key ==";
  String serverName = "node1";
  
  CacheFactory cacheFactory = new CacheFactory();
  cacheFactory.set("name", serverName);
  cacheFactory.set("mcast-port", "0");
  String workingDir = String.format("c:/software/ssw/%s", serverName);
  cacheFactory.set("license-working-dir", workingDir);
  cacheFactory.set("deploy-working-dir", workingDir);
  cacheFactory.set("locators", "localhost[11044]");
  cacheFactory.set("license-data-management", license);
  cacheFactory.set("distributed-system-id", "1");
  Cache cache = cacheFactory.create();
  cache.setIsServer(true);
  
  CacheServer cacheServer = cache.addCacheServer();
  cacheServer.setPort(30303);
  
  String gatewayName = String.format("%sSender", serverName);
  RegionFactory replicatedRegionFactory = cache.createRegionFactory(RegionShortcut.REPLICATE_PERSISTENT_OVERFLOW);
  replicatedRegionFactory.addGatewaySenderId(gatewayName);
  replicatedRegionFactory.create("TestRegion");
  
  cache.createGatewaySenderFactory().setParallel(false).create(gatewayName, 2);
  cache.createGatewayReceiverFactory().setStartPort(12000).setEndPort(12009).create().start();
  
  cacheServer.start();
  
  
  
  
  
  

  Each member starts and runs but when inspecting via "list gfsh gateways" I have the following message:

  [warning 2013/11/15 13:56:50.148 CST loc1 <RMI TCP Connection(3)-172.20.121.109> tid=0x56] (tid=11 msgId=11) Errorjava.lang.Exception: node1 is an invalid member name or Id
    at com.gemstone.gemfire.management.internal.beans.DistributedSystemBridge.validateMember(DistributedSystemBridge.java:694)
    at com.gemstone.gemfire.management.internal.beans.DistributedSystemBridge.listGatewaySenderObjectNames(DistributedSystemBridge.java:1218)
    at com.gemstone.gemfire.management.internal.beans.DistributedSystemMBean.listGatewaySenderObjectNames(DistributedSystemMBean.java:344)
    at com.gemstone.gemfire.management.internal.cli.commands.WanCommands.listGateway(WanCommands.java:603)
  
  
  
  
  

  This message is incongruous with ' gfsh describe config - Member = node1':

  gfsh>describe config --member=node1
  Configuration of member : "node1"
  
  JVM command line arguments
  -------------------------------------------------
  -Didea.launcher.port=7542
  -Didea.launcher.bin.path=C:\software\ide\IntelliJ
  IDEA
  12.1.4\bin
  -Dfile.encoding=UTF-8
  
  
  GemFire properties defined using the API
  .................................................................................................................................
  deploy-working-dir                       : c:\software\ssw\node1
  distributed-system-id                    : 1
  license-data-management                  : === omitted ===
  license-working-dir                      : c:\software\ssw\node1
  locators                                 : localhost[11044]
  mcast-port                               : 0
  name                                     : node1
  
  
  Cache attributes
  .................................................................................................................................
  is-server        : true
  
  
  Cache-server attributes
  . port                 : 30303
  
  
  
  
  

  Has anyone tried to get a bridge linking purely Java API?

  Thank you

  Jeff

  Jeff,

  I appreciate you are trying to help.  I expect to have a setting that I forgot.  Your suggestions were valid and I have test again each of these this morning.  I think I've identified the problem and it isn't really a problem code, setting issue or a question of GemFire. I think that our network of local offices has a particular configuration that affects GemFire in a unique way.

  In my test, I used localhost as the address for locators and remote control-locators.  I changed to be my explicit hostname and I do not see the error longer.  I am able to inspect bridges via gfsh and start them.  FYI: I witnessed a different symptom with the new product of the pulse.  When you try to deploy the war impulse locally I be watching only partial functionality.  The application of impulse load but could not inspect the data nodes, but I could see the locators.  I played with each of the possible combinations (ip address, host name, localhost, qualified domain host name) and the only way I could solve the problem of the impulse was to use the host name.  It smells the same number of local network.

  I'm working on a Windows desktop computer and use an active Windows with DHCP domain controller.  Production deployment is on RHEL and should not encounter these problems.

  Thank you

  Jeff

• Numbers that come out to "1n7" instead of "1.7" when you use Java APIs

  I have an RTF template, and on the text in Word form field Options dialog box, I Format rule number field on "#, # 0.00000. When this model will be run in a concurrent program, or from the plug-ins office, numbers to format correctly in the form "1.7". But, when I run with a model with the Java API or the viewer of documents common region in the OPS, the numbers are formatted in the form "1n7". I get a "n" instead of a ".".
  
  Any ideas on what could be the cause?
  
  My calling code is below.
  
  Thanks in advance,
  Kurz
  

  OADBTransactionImpl oadbTrx = ( OADBTransactionImpl ) pageContext.getApplicationModule( webBean ).getOADBTransaction();
  DataTemplate dt = new DataTemplate( oadbTrx.getAppsContext(), "XXCUS", "XX_CNQCBSR" );
  ByteArrayOutputStream bos = new ByteArrayOutputStream();
  Hashtable htp = new Hashtable();
  htp.put(
       "P_AUCTION_HEADER_ID",
       this.auctionId
       );
  dt.setParameters( htp );
  dt.setOutput( bos );
  dt.processData();
  
  DocumentHelper.exportDocument(
            pageContext,
            "XX",
            "XX_CNQCBSR_MAIN",
            "en",
            "US",
            new ByteArrayInputStream( bos.toByteArray() ),
            "PDF",
            null
            );

  Maybe check the value of the profile option "ICX: numeric characters?

• URL broken in Java API Docs

  Just a heads up, there's a URL broken in the Java API (I checked 6.0.0 and 7.1) within the section of class ReedSolomonDecoder.  The second URL of the source document that is referenced is missing the required prefix and is loaded as a relative URL.

  UPDATE: just noticed the "Submit comments" button: Pei

  Fact.

• Otherwise for development if there is no java API?

  Hi, expert,

  Right now, we are trying to find out if we can set password policies, configure vpn profiles and configure the email on blackberry programmatically accounts.

  To establish password policies, it is confirmed that there is no API: http://supportforums.blackberry.com/t5/Java-Development/Is-there-API-to-change-the-password-policy-a... .

  To set up e-mail, I saw this: http://stackoverflow.com/questions/5496885/set-up-a-non-blackberry-email-account-on-blackberry-devic... and http://supportforums.blackberry.com/t5/Java-Development/Setting-up-non-BB-email-account-on-a-Blackbe.... Say that there is no API to do.

  for the VPN profile this post http://supportforums.blackberry.com/t5/Java-Development/Create-VPN-profile-and-VPN-settings-programa... receives no answer.  And this post http://supportforums.blackberry.com/t5/Java-Development/Virtual-Private-Network-VPN-connection-quest... said that it has no API to configure the VPN profile.

  So it doesn't look good at all. Just wonder if there is another way if there is no java api for development. There are some sellers who could really do more, as this company: http://www.astrasync.com/, they could enforce the policies of the Exchange.

  I could think of is to use EventInjection of our application in e-mail blackberry UI configuration (which we would try to start as well). Not sure about good password policies.

  It would be really appreciated if someone points or thoughts for research which will seek us in future investigations.  Y at - it all unpublished API rim including some seller access to the (for example, http://www.astrasync.com/)?

  I will close this thread because it seems that it is no other way to do this if there is not java API.

• How to get the attributes of node when you query the TQL via java API

  Hello

  I'm trying to pick up a hierarchy of IC using a TQL. I created a TQL on uCMDB and am now questioning him through the uCMDB java API. The TQL is simple and queires a hierarchy containing a Node (Server) containing the disks, file systems, interfaces and IP addresses.

  My code snippet is:

      UcmdbService ucmdbService = CMDBConnection.createCMDBService();
      TopologyQueryService queryService = ucmdbService.getTopologyQueryService();
      Topology topology = queryService.executeNamedQuery("BasicTopologyView");
      Collection allCIs = topology.getAllCIs();

      for (TopologyCI node : allCIs) {
               System.out.println("Node is " + node.getPropertyValue("display_label") + "(" +node.getId().getAsString() + ") ... " + node.getPropertyValue("display_label")
                       + " ... " + node.getPropertyValue("TenantOwner")+ " ... " + node.getPropertyValue("discovered_os_name"));
           }

  The output I get is

  The node is/usr (18de9fd759680f10b4f1d3567fb0f5e5)... / usr... null null
  The node is/tmp (18eaac5d8ec14e45874029f25011a13c)... / tmp... null null

  Whatever properties I question are coming as null. Is there a way I can say uCMDB what I expect from each node to the execution of the attributes.

  Thanks in advance.

  Peyrot

  This problem is now resolved. The correct way to proceed, queryProperties method is used when querying of the node.

  node.queryProperties(props);
  

  When the accessories is a string containing all of the appropriate properties you want to take to uCMDB.

• ORAAH Java API

  Hi do anyone knows if ORAAH comes with a Java API? Also outside installation guide guide and developers is there any other source material or tutorials available?

  Thank you!

  Marlene

  Hi Marlene,.

  Not sure what you mean by "Java API"; It is a widely used software R rJava, which is a general interface to R-Java - see the Homepage and download page of GUTS to learn more. There is also a small package of R type tutorial for use of rJava: helloJavaWorld.

  Regarding the materials, apart from those that you mention that there are also things in Chapter 7 of the Big Data connectors manual, which is part of the Big Data Appliance documentation.

  Hope this helps

  Christos

• HFM Java API pots found empty in the installation of the EMP

  Hello

  We seek to develop an extension HFM application based on the Java API of HFM as in https://docs.oracle.com/cd/E40248_01/epm.1112/hfm_javadoc/index.html

  While looking for the required JAR files epm_hfm_web.jar, epm_j2se.jar, epm_thrift.jar in our installation of EMP, we find that these files are empty with only the meta-inf folder and no class file was present.

  Are we missing something in the installation and the configuration or not looking in the right location for these jar files.

  Jar files are located in D:\Oracle\middleware\EPMSystem11R1\common\jlib\11.1.2.0 in our facility

  The details of the environment are as below.

  Oracle Fusion of EPM edition workspace version 11.1.2.4.0.79

  UI version 11.1.2.4.0.79

  This issue is already displayed in the HFM area, but we think that could hope to a solution here.

  Please suggest how to overcome this problem.

  Kind regards

  Guna

  If you look at the manifesto in the meta-inf directory you can see all of the jar files that are referenced in the class path

  See you soon

  John

• The difference between the ADR green vs JAVA API usage? It's confusing

  Can u clarify the difference between the ADR green vs JAVA API usage? It's confusing. If I want to create a custom algorithm, what should I use. Is it Java APIs or green Marl

  Thanks in advance,

  Akhil

  Hi Akhil,

  Thank you for your interest in the PGX! If you want to write a custom algorithm, you should do it in green-Marl. Marno-Green is a custom DSL specially designed for writing of graph algorithms. You can then use the Java API of PGX to compile and run your algorithm. Find a detailed tutorial: http://docs.oracle.com/cd/E56133_01/tutorials/compile.html

  PGX is delivered with a set of built-in algorithms, each available as a convenient Java method. Internally, all algorithms are written in green-Marl as well. The signature of the Java method aligns with the signature of the underlying green-ADR procedure. Find information about the algorithms here: http://docs.oracle.com/cd/E56133_01/tutorials/builtins.html

• Java API for OBIEE?

  Hello

  I am looking for Java API and SDK OBIEE, please help with the problem...

  Thank you

  Sandeep

  Details of Web Service and the API: https://docs.oracle.com/cd/E28280_01/bi.1111/e16364/toc.htm

• Caveat when using Mobile Server Java Api Java

  Hi, I have done some java applications to manage users, etc. for Mobile Server 11.3 pub point.  In the console I have use to run java code, I still got the message as:

  Butcher: WARNING: GENERAL: TID$ $ already exists for NomUtilisateur1, ignored

  Butcher: WARNING: GENERAL: TID$ $ already exists for the USER name, ignored

  These messages change depending on the task that I do.  I had the same programs with Olite 10 G java api and I did not have these messages.

  The messages I get are only WARNING and the operation I do work even if messages is displayed.  Does anyone know how to get rid of these messages?

  Thank you

  I found the problem.  I used the jar coming from the server instead of the jar from the MDK (Mobile Development Kit).  Using those to remove MDK all messages.

• Creation of posts of Siebel using JAVA API in IOM

  Hi Experts,

  I need to create positions of Siebel using JAVA API.

  I try to incorporate OIM 11 g-Siebel connector, but this connector is not able to create new positions of siebel.

  Please tell me where to find the info/examples of use of the api or how to best integrate?

  Thanks in advance

  Kiran

  This is useful.

  I was able to create a post of siebel using the model given here,

  Creating New position in Siebel using Siebel DataBean

• Word 97/2003 XML to PDF conversion (Java API)

  Hello

  Is there a Java API for converting XML Word documents (1997/2003) in PDF format?

  Kind regards

  Gautam.

  You may need the forum product for LiveCycle PDF Generator. However, I think he can use Word on the server and thus be able to read what it can read the words.

• How to get the id of the cluster, the name of vcenter via vi java api? Please help me

  I use vsphere java api, I wanted to retrieve the uuid of the cluster and datacenter resourcepool, how do I do it?

  Welcome to the Forums, I took the liberty of moving your question to the right subforum.