vROps stopped producing the heatmaps

Similar Questions

• When Apple stop producing iPhones 5s?

  Hello, I want to buy iphone 5s, but not now.

  When Apple stopped producing and selling the iphone 5 s?

  Until Apple makes an announcement, or until he arrives, no one here would know.

  They have already stopped making all models of 5 waiting space grey and silver 16gig 16gig.

• I want to run a vi that has a switch that passes between when run in vi It gives meeesage the highest level VI stopped for the unknown

  I want to run a vi that has a switch that passes between when run in vi It gives meeesage the highest level VI stopped for the unknown

  What should do?

  bisso92,

  You must be more specific...  When you say that you want the cover to be visible when it is called, I suspect you mean sub - vi.  You can go to the menu:

  File > properties VI then select the appearance of the window, followed to customize and select "display panel when called.  You can also select close thereafter, while initially closed.

  There are other "tricks", such as the incorporation of secondary school within your main VI, in this way, you can see both.

  Normally, a hand VI (or main function in other languages), would still present so that the operator can perform other operations.  If so you should look at using a Structure of the event with a producer / arrangement of consumer, where the consumer in a loop has the case structure where the sub-vis.

  To learn more about LabVIEW, I suggest that you try to watch some of these tutorials.

• can not make or produce the clip modified with dark tones / highlights and reverse

  I can not make or produce a clip that has been modified with the shadows / highlights (smoothing time, black, white clip) and reverse with speed / duration.  When you try to make I get an error.  No number it says only: order and error.  If I try to produce the video, it starts to run and then I heard a sound that resembles a goat and the program stops.

  Clamp reversed, nest, and then add the effect or v.v.

  See if this will help.

• IPhone 6 produces the sound by clicking in the right corner and same dust is collected

  IPhone 6 produces the sound by clicking in the corner right and even the dust is collected!

  Can you describe the issue in more detail? When exactly it happens? Take your device at the Apple Store for further diagnosis.

• I woke up this morning and my iPhone 6 does not light. I tried to reboot it by holding down the button market / stop and the button "home" but the apple logo never appeared and I had on the charger for a while and still nothing. Please leave suggestions!

  I woke up this morning and my iPhone 6 does not light. I tried to reboot it by holding down the button market / stop and the button "home" but the apple logo never appeared and I had on the charger for a while and still nothing. Please leave suggestions! Thank you

  You can make an appointment at the Apple Store - Genius Bar store and bring it into service. You can also search an Apple Store - find a store - Apple.

• I have two Apple TV. The remote control that interferes with the other. For example, if I press stop on the distance she also those other programs. How to do this?

  I have two Apple TV. The action on each distance affects the other tv. For example if I press stop on the remote control will stop the program on the other tv to. How can I stop this from happening?

  Easy.  You must associate each ATV with one of the remotes.  Each ATV is not paired and will 'listen' to any distance.

  The trick is to cover before the other ATV when matching so the two do not listen.

  Silver or white remote control: pair or cancel the twinning of the Apple Remote with Apple TV (3rd generation or earlier)-Apple Support

  Siri remote control: http://help.apple.com/appletv/#/atvbc9953e63

  Don't know what models you have the ATV, but the whole process is the same:

  1. choose a remote control and an ATV.  Cover the front of the another ATV.

  2. hold the remote control in 3 inch they recommend, pair it with appropriate above process.

  3. choose the other remote, unlock the first ATV and block that you just paired.

  4. hold the second remote control 3 inches from the second ATV and pair it with appropriate above process.

  5. release the first ATV and enjoy.

• After installing ElCapitan 10.11.4 on my G5, if I stopped for the night for some reason, the computer starts again sometime between 03:00 and 07:00. Any thoughts?

  After installing ElCapitan 10.11.4 on my G5, if I stopped for the night for some reason, the computer starts again sometime between 03:00 and 07:00. Any thoughts?

  Sounds like an Energy Saver preference, but what computer do you use?  A G5 (PowerPC) machine will not work on El Capitan.

• stop using the password for additional security

  stop using the additional security password, thank you (you want to just use simple password).

  Define a new master password and leave this field empty.

  See change or remove the password:

  • https://support.Mozilla.com/kb/protecting+stored+passwords+using+a+master+password

• Satellite Pro L500 - stops when the power cord removed

  Toshiba Satellite Pro L500 stops when the power cord is removed even with the battery to 100%. I removed the battery and all the indications associated with battery answer correctly. For example turns off, Toshiba Health Monitor also indicates when the battery is removed. If installed Health monitor indicates that the battery is at 100%.

  Someone please help. I have not installed anything new.

  Hey,.

  For me, the matter is clear: the battery can't hold a charge so the laptop will be shut down because it has no power.

  I think you need to replace the battery with a new one and you can get a provider of service authorized in your country. Simply contact the guy and ask that they can tell you how much it would cost.

  You can find a list of all FSA here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)

• Satellite Pro A10 stops during the installation of Windows

  I have a satellite Pro A10, which stops during the installation of Windows. The installation gets to the part where I need to select the HARD drive to install, then the system off just. I can restart it immediately, and the sdame happens.

  If I enter the BIOS, everything is detected OK, and I've updated to the latest version (V1.4). Also when in the BIOS, the system will remain under tension for ever and a day! and no downtime. I have a couple of diagnostic CD, then run the tests is the same thing, but I ran the seagate diagnostic tool and the HDD OK passes, as does the main map, but cannot perform detailed testing that the system shuts down during the tests.

  I suspect an overheating issue but would like advice.

  Hmmm it s very strange. I thought that the HARD drive could malfunctions but it of very impossible if the HARD drive has passed the Seagate diagnostic test.

  However, it would be very interesting to know if the installation of the OS would end with another HARD drive.
  You know, it of always difficult to provide an exact solution without any diagnostic tests.

  For me, it really looks like a hardware malfunction. So perhaps it would be advisable to contact the authorized Toshiba maintainer for a control of the laptop.
  Guys could run tests and would situate the fault quickly.

• Firefox does not load pages and said "Stopped" in the lower left corner of the screen.

  Latest FF and XP Pro. 2.4 Ghz Celeron processor, 1 GB of RAM. FF will work for awhile then it will stop loading pages and say 'Stop' in the lower left corner of the screen. Sometimes I can refresh and the page loads, but 95 out of 100 times I can keep refreshing and it will say "stopped". Alternatively, the page will be partially load and then quit and say 'stop. ' I disabled IPv6 and DNS Prefetching and he always does. IE does the same. VERY frustrated. My last PC started doing this and I've finally upgraded to a newer version and it was fine for a few months, but began to do the same thing recently. Arghhh... Thank you!

  This has happened

  Each time Firefox opened

  is with my last computer a few months ago

  You, me and many others (from discussions throughout the net) have this same problem. I had a few glances at Mozilla, take a look, they couldn't find a problem or a solution.

  Here's what I found works - the problem arises on me when I upgraded to Firefox 3.63. 3.63 FF of uninstall and install 3.59. You can always download until the end of June or July I think.

  My problems went away with 3.59. Seems to only affect users of Windows as Mac Firefox 3.63 works very well.

  Found a few discussions pointing to ZoneAlarm Firewall time-out managers and some download tools. I have ZoneAlarm, so I don't think that was the cause, just another victim.

  I wish Mozilla would pull the plug on 3.63, repackage as 3.64 3.59 and go back to the drawing board until they find out what is wrong.

• Satellite M50 - adapter AC/DC immediate stop of the laptop

  problem on power transition AC / DC battery:

  It causes the immediate stop of the computer

  France
  Satellite M50
  Windows XP SP3
  Antivirus / Firewall Norton

  Thanks for any suggestion or problem to Microsoft and Toshiba to signage.

  Hello

  Can you give us a more detailed description of the error? What do you mean that this computer shuts down?
  Do you see a BSOD?
  Computer laptop completely freezes?
  …

  Sorry, but at the moment I can t help you. Maybe the AC adapter must be replaced.

  Welcome them

• Equium A60-155 has stopped charging the battery

  Hey all
  Can anyone help?

  For no apparent reason my A60 has stopped charging the battery, it works very well with the cord in but take out and matrices of the computer. Energy saving says that it does not load but defaults to full power with the power cord in. I tried to remove the battery for a while and change the power settings, but nothing helped. This happened to someone else? I have to buy a new battery?

  Thanks in advance

  Hello

  To me, this looks like a charging problem and it can be caused by power supply to electronic malfunction. Perhaps only the battery is dead. However the best solution is to contact the Toshiba service partner because he can start the diagnostic test and then give you an appropriate response.

• Satellite P750 stops at the start of the 1st time but then works great 2nd time

  Hello
  My Satellite P750 always stops on the first time every day, but the 2nd boot works fine and no other problems...

  I press the Start button and it runs for maybe 10-20 seconds then stops... She does both on battery or power outlet...

  If I try to start again after that, it starts fine... sometimes, it gives the possibility to start in safe mode, or run the Startup Repair tool, but it always starts well and works normally...

  I tried to start repair when the option was given, and it is immaterial that the next day, he does the same thing again...

  Any advice appreciated, and Im a bit concerned that one day he did not start the second time...

  The laptop is only around the age of 6 months and otherwise runs great...

  Thank you

  Hello

  Recovery of the laptop back to factory settings.
  You use the Win 8 or Win 7 system?

  Usually, books Win 7 supports a HARD drive recovery by pressing F8-> fix my computer-> drive HARD recovery.

  If the same problem appears on the right after the system has been recovered, I guess there is a hardware problem and a technician must check the hardware parts.