VSAN health is missing from the Web Client 6.0 GA

Similar Questions

• NetApp VSC v6.1 UI is missing from the Web Client v6.0u1

  I recently updated my vCenter Server 5.5 to v6.0u1 (2k12r2 for Windows with backend SLQ 2012). With that I installed a fresh instance of Virtual Console storage NetApp v6.1. All was working perfectly until I've restarted the vCenter after about 2 weeks of operation of the new version. After you restart the gui NetApp VSC and features were missing completely on the web client. The plugin has always shown as active in the webclient service is, however, no GUI. Strangely when I try to disable the plugin from the web client, it refreshes and remains only set as active.

  In heavy client, the icon was always present, however with the new version (6.1), no functionality can be achieved through this and you are just re-directed toward the Web Client of VMware. Backups were still underway at the scheduled time, even if the plugin was not visible in the Web Client.

  I tried the following:

  The re-registration plugin

  -Stop webclient VC services, stripping any trace of com.netapp* of the VMware folder of the directory (program files and program data). Mainly located in the folder of vSphere-Client-serenity

  -Departure VC web customer service

  -Re-enrollment VSC with VC

  All the re - install

  -Stop services of VC

  -Stripping any trace of com.netapp* of the VMware folder of the directory (program files and program data)

  -Stop services VSC

  -Do a complete uninstall

  -Remove the VSC installation directory

  -Reboot server VSC to delete reg keys

  -Install the new copy of VSC 6.1

  Re-record with the VC Server

  The same question is observed. The plugin shows as being installed. The extension "com.netapp.nvpf.weblient" exists in the breast of the https://< vCenter > / mob. (see attached screenshot). The thick client still shows the plugin as permitted, as the web client. I still cannot see the interface user via the web client despite the plugin is installed and activated.

  Tear out my hair with it. Any help would be greatly appreciated.

  

  Guys,

  An update on this issue, it could be useful to resolve any other issues similar and research...

  After 4months our case eventually made its way to the development of the web client team in VMware. The problem has been identified as a corrupted file in vCenter which is responsible for organizing the status "enabled/disabled' plugins customer web. Difficulty as follows:

  "C:\ProgramData\VMware\vCenterServer\data\vSphere Web Client\SerenityDB\serenity\ALL\client.package.states.

  The solution was: -.

  • Delete the file
  • Open customer vcentre, administration, plugins
  • Disable a random plugin (this forces the State file recreate)
  • Exit vcentre and then reopen
  • Plugins should now be visible
  • Customer goto plugins and re - turn that which has been previously disabled

  Good luck guys, it was a serious pain in the ass

• PHP form script is missing from the web server or PHP is not properly configured on your web hosting provider. Help - I get this message on my site when the form is filled out and you press send... Check if the form PHP script has been downloaded correctl

  PHP form script is missing from the web server or PHP is not properly configured on your web hosting provider. Help - I get this message on my site when the form is filled out and you press send... Check if the form PHP script has been downloaded correctly, contact your host about the configuration of PHP.

  Hi Graham,

  If you, please add your site to this link ( http://my-site.com/scripts/form_check.php ) and make sure that all green checkmarks are appearing. If they don't, let us know what errors you seem to receive and include the link to your site.

  In addition, check out this guide on the forums of Muse troubleshooting: Troubleshooting Muse form used on the servers of third party Widgets

  I hope this helps!

  Emily

• Table USR are missing from the java client

  Hi Experts,
  
  I imported the XML xellerate, Java customer USR table is missing, but I can find USR tables and columns defined by the user in the data base.
  
  Thanks in advance.

  Get USR export to leave a clean EPS and then import it

  Thank you
  Suren

• Error in the logs when a workflow running on the web client of vSphere WARN {} [TypeQualifierToDecoratorConverter] could not find the mapping for: class ch.dunes.model.type.qualifier.TQCallerParameter, [kind:null, name:contextualParameter, value: __NULL__

  I see this error:

  WARN {} [TypeQualifierToDecoratorConverter] could not find the mapping for: class ch.dunes.model.type.qualifier.TQCallerParameter, [kind:null, name:contextualParameter, value: __NULL__]

  pop up in newspapers of vCO a few times on a workflow when I try to run it from the web client of vSphere.  I wonder if it is somehow contributing to the time it takes to render the page.  We never saw it or someone has a clue about what might be the cause.  Newspapers are clean when I run the workflow of the vCO client.

  TQCallerParameter is a kind of decorator that is not exposed in the REST API. This warning message is safe and does not affect performance at all.

  You don't see it during execution of the workflow of vCO customer because the customer vCO does not use the REST API and therefore does not need to run conversions Decorator.

• How to change the display language for vsphere client from the web?

  Hi all

  I would like to know how to change the display language for vsphere client from the web?

  help please, thank you!

  Take a look at http://blogs.vmware.com/vsphere/2012/10/the-vsphere-web-client-and-localization.html to see which languages are available and how to change the URL.

  André

• vSphere client from the Web do not show vCenter

  Hello

  Not sure if this is the choice correct forum ask...

  I installed 5.5 Esxi and vCenter og vSphere Web Client 5.5 trial version to do some lab... Everything went ok, but when I start the Web Client vSphere vCenter server is displayed. I thought this was going to be added automatically, I've logged on with domain administrator and this user have full administrator on the vCenter server access. I did some googling, and it seems that I must follow the solution below, can anyone confirm? Is this a known issue?

  VMware KB: Re-score and the reinstatement of VMware vCenter Server 5.1 / 5.5 and components

  / R

  Andreas

  Not all administrators have permissions to manage the server vCenter Server by default, so you must open a session using the [email protected] account, add the domain to the "Sources of identity" and configure permissions on the vCenter server object in the inventory.

  André

• inventory of missing vCenter using the web client?

  I just upgraded my environment to 5.1 and for some reason, one of my vCenter servers shows no inventory by using the web client. I double checked the permissions on both sites and have checked the inventory in the vSphere client and everything seems good. I have two related modes and the other shows, everything is fine. I tried repointing and re-application as in accordance with article (KB VMware: repointing and re-application VMware vCenter Server 5.1.x and components) but all exits show as being already recorded. Any ideas?

  

  Thank you.

  This is the expected behavior for the operation of the Service of the inventory.

  Searches in the vSphere Client works perfectly?

  Take a look at the following kb NOT to DO ALL THE STEPS IN THERE!

  http://KB.VMware.com/kb/2033620

  Only follow re-register vCenter Server with the Service of inventory for now, if the search in vSphere Client function does not work correctly.

  
  

• Folders that I create in Thunderbird do not arise outside of Thunderbird (on the web client for my emails)

  Hello

  It's my first post because I can usually find supported using google, but I can't see any advice on this.

  Lets say I create a folder and name it 'sites' in Thunderbird, I created a rule for every email I get from stores online on their promotions go in this folder, so they do not distract the important emails, but I can view them later if I want.

  When I then log in my account outlook through their web client or if I check on my phone (which is where I'm mainly going through emails), the folders that I created in Tbird, do not show on my phone or the email provider webclient.

  I tried logging in and out of my web client and Tbird but records do not update, they remain in the Tbird but do not show in the web client or on my phone, which means that I can not read the messages held except when I home on Tbird.

  I appreciate your response.

  When your problem has been fixed, please mark the thread as "resolved".
  Thank you.
  Have a complete backup of your profile folder is strongly recommended in all cases.

• I can print Microsoft Word and Excel documents, but I am not able to print from the web. I get an error message that says: "Activation - Code 20' - error"Printer Not Activated".

  Activate printer F4580

  I run Microsoft Vista.  I have a printer HP F4580.  I can print Microsoft Word and Excel documents, but I am not able to print from the web.  I get an error message that says: "Activation - Code 20' - error"Printer Not Activated".  What should I do to correct this?

  Hello

  ·          What browser do you use to connect to the Internet?

  The error may occur if the wrong printer is set as default, the printer driver printer is missing, or if there are conflicts in Device Manager.

  Step 1: Make sure that the desired printer is set as the default printer:

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

• Just improved 5.0 to 6.0u2 vcenter.  How do eliminate you the web client certificate error?

  We were a vSphere 5.0 shop for many years and enjoyed the client c# 4.0, 4.1 and 5.0 then days.  We just upgraded 6.0 Update 2 this week and although always, we are primarally used to the c# client and will use it for a while to come, I am getting used to the web client for the new features that are available only in it, such as SRM and VR.

  I was able to click through the numours of screens of reminder to get via Firefox after all these certificate warnings and even easier just click the one or two things in Chrome or IE to get in.  But how could eliminate total certificate errors?  Example, now I'm with Chrome, but the https:// in the address bar is red with a slash through it.

  In most all other device based on web or connection we have, as HP iLO, Dell iDrac etc... usually, we create a CSR on this device and it present our internal Windows certificate authority and recover a file to go back to the device.  Is it possible to do this with the web client?  We have a certificate of 'Server Web 2' model that generates the sha256 return certificate and inherently all field devices to trust him because the area is important our root certificate authority.

  Also, we are running services such as replication vSphere and SRM, I would not change certificate affects only or same vSphere Update Manager.  We have two sites HQ and DR.

  I ended up getting rid of the cert errors by following this page: 6 replacement vSphere SSL certificate / implementation by using the Certificate Manager-automation tool

  I followed the procedures for "Certificate of Machine (Reverse HTTP Proxy) replace with certificate custom" and just that.  I didin 't' t mess with root VMCA with custom signature certificate certificate because its seems to me like he wanted to do an endless number of the signature of the certificate request and keys.  But the first option considered for our internal Windows CA took care of her.

  For replication of vSphere 6.1.1 that I had to turn off the virtual devices from replication via customer web vSphere vSphere and then put them back on.  Then connect to their URL of web management (port 5490) and make the reconnection to the vsphere on the connection tab, where he was invited to accept the new certificate.

  For AUVS I had to run the VMwareUpdateManagerUtility.exe under C:\Program Files (x 86) \VMware\Infrastructure\Update Manager and to the third option of re - register to vCenter, and then restart the service.

  Surprisingly, SRM sites remained paired although I've read that some people have trouble with it.  I'm on 6.0 update 2 and I think one of the questions was fixed in 6.0 Update 1 b.

• VRO v6.01 installation but not displayed in the web client

  I'm having trouble with a clean install, not appearing is not in the Web Client, and I hope someone here can help you.

  I built my house with vSphere Lab 6 now it's GA, and after sunrise vCenter and run, I thought I'd have a look at the latest and Orchestrator (v6.0.1). I have deployed the OVF very well (I used the GUI client such as web client and their tools of 'integration' are all except) and entered the web configuration portal. I finished the tab "vSphere infrastructure" (SSL, authentication SSO, licensing, registration vCenter) who has successfully completed (according to the display messages).

  However, when I go into the tab Orchestrator WebClient service where no server is listed and no workflow is available. I checked the plugin vCenter client is enabled (under Administration > Solutions > Client Plug-ins) and I also tried to register through the client GUI Orchestrator and 'Add a vCenter Server' and 'Save a vCenter Server' workflows running both successfully completed. Still no luck.

  Any ideas how I can get registered with vCenter Orchestrator (I use the VCSA) or if I start troubleshooting? Good to check logs files?

  Thank you

  Ed.

  OK, if you see that the "get started page", this means the plugin vRO has not been downloaded and deployed in vSphere Web Client.

  In 6.x, the binary plug-in are hosted on server vRO and vSphere Client Web downloads and deploys it. How the plugin site is discovered is the URL extension of the VC.

  The first thing to check if if the URL is valid and the plug-in can be downloaded from it. Open the managed object browser, and then clicks ExtensionManager -> "com.vmware.vco" extension-> client -> url. Its value must be something like https://vcoip:8281/vco/vsphere-web-client/vco-plugin.zip. Open this URL in a browser and verify that the downloaded ZIP file.

  If the ZIP file can be downloaded without problem, check the file of newspaper Web Client vSphere (vsphere_client_virgo.log) traces associated with failed to download plugin (you can find the name of the vco-pluginfile).

  If there is nothing associated with vco-plugin in the papers then maybe vSphere Web Client not attempted to download it. I think he's looking for plug-ins at startup, then you can try to restart the Web Client vSphere (in the device, it is named vsphere client , so you can restart it with the command "restart service - vsphere client").

  In addition, you can try to connect to Web Client vSphere with the admin user, then go to Administration -> plugins customerand click on the search of new plug-ins link.

• VCenter 5.5 new install - VCenter not no projection in the Web Client

  Hello

  Today, I installed a new simple installation of 5.5 VCenter Server with all the parts.  I can access the web client very well and it will also authenticate with SSO (even if I don't allow my username anywhere, maybe I'm a domain administrator it allows this?).  Anyway I digress, when registering in the web client VCenter County shows 0 and I am obviously unable to perform all tasks at all.

  Of course, my link between the VCenter server and Webclient went wrong somewhere and I am struggling to see how to solve this problem.  From my research in 5.5 that it should automatically just connect and you don't need to 'register' that we had to do with older versions.

  Any help appreciated.

  Thank you

  Paul

  Hello

  As described in this KB KB VMware: vSphere installation 5.5 Web Client on a Microsoft Windows platform

  Among the vSphere post installation steps Web Client adds SSO identity Source

  Log in to the Web Client vSphere and authenticate using the [email protected] domain to check that the SSO and vSphere Client Web work correctly.

  You can also add an external identity source, such as Open LDAP and Active Directory before deploying the server vCenter Server and inventory Services.

  For more information on the different types of Sources of identity for vSphere 5.5, see him add a vCenter Single Sign-On identity Source section of the Guide of installation and Installation of vSphere.

  
  

  You connect by using the domain ([email protected]) account?

  Have you tried to connect with username [email protected]?

  According to the guidelines of vSphere vSphere 5.5 Documentation Center Documentation

  When an identity source is added, all users can be authenticated but have access no. authorization.

  If you open a session by using the domain account (domain administrators) you might be able to connect, but cannot perform all the tasks that the user is to have access permissions.

  Then you can try to login with the username [email protected] first, then assign permission to your domain account.

  The steps to add the UNIQUE identity Source Authentication (if the ad has not been added) and assign permissions (for the domain account) are described in vSphere Documentation here:

  vSphere 5.5 Documentation - add a vCenter Single Sign-On identity Source

  VSphere 5.5 Documentation Centre - assign permissions in the Web Client vSphere

• Help, I changed the password of root ESXi via powerCli, now I can not connect with the web client or the console.

  Help, I've changed the root ESXi via powerCli password, now I can not connect with the web client or the console, but I can still connect to powerCli. The command I used was;

  SE connect-VIServer esxihostname-user root - password newpasswd

  This production network btw, I have connected to each host and run the above command, these ESXi hosts are not on a domain

  y at - it something I have left out. I really appreciate any assistance that you people can provide.

  Thank you, Joe

  It is probably a longshot, but a lot of things in the land of windows is not sensitive to capital letters as Unix is.  I wonder if your new password you put through powerCLI mixed uppercase in it and if the capitalization was abandoned by command windows powerCLI Analyzer, or he interpreted as all capitals or something.   If you can still get through the powerCLI you could try to reset the password again to something simple without capitalization mixed case and if your password on ESXi strategy requires a special character, try something different than a "$", like a "_" (I find that a '_' is less likely than some other special characters (, as a '-' or a ' / ' to cause problems with analyzers.).

  Edit:

  Another thing, you can try before playing with the password once again, is to create a different username ESXi using powerCLI and see if the password ends up what you think, it should be, and if you can get with the client vsphere using it.  In this way, you can find out if there are some problems with certain characters or Cap through command powerCLI Analyzer without losing your remaining root by powerCLI access.  After some tests, you can understand what went wrong with your initial password change and may be able to fix it with less risk of losing access.  I also assume that you can not create a new username on ESXi who is able to change the root password no matter what authority give you it, otherwise, you could create a new username with PowerCLI, then connect to the client vsphere with it and change the password to root from there.

• "Convert a model" in the web client

  In vSphere client one of the default options for a VMguest is to "convert a model."

  I use it a lot, I have a couple of models, after a few weeks/months I convert a VM + updated everything what is necessary + convert model.

  The conversions back are almost instantaneous.

  With the web client, I can convert an existing model to become a virtual machine, but I can't find the option "convert to a model.

  This means that if I want to update a model, I find myself with a long process of "clone model" and plus my original CD VM is left behind, requires me to remove it to clean the models folder.

  If this option is not added, or have I missed something obvious?

  If indeed, it is not available, does anyone know why it's been left in the first place?

  Thanks in advance,

  Mark

  The option convert to model in the vCenter Web Client should be available in the "All actions of vCenter" section as shown in the attached picture. (This is the Web Client 5.1).