vSphere 4 + ESXi 4: Image using a RDM cannot be migrated to a different host, card held locally RDM?...

Similar Questions

• Can I use an image in VMware Player for Vsphere for Esxi?

  Jeremy

  User French

  Hello, my saver

  Currently, I have an Esxi, but before I used a picture of WMware player to my virtual server and I know, I use Vsphere to work with my 5.1 ESsxi, I just want to know if I can use my VMware Player image in VSphere for Esxi? and if the answer is Yes, how?

  Thanks for your help.

  Right, so use VMware converter to do this as indicated in my previous post.

  Kind regards

  Julien

• Backup error ESXi 5.5 using vicfg

  I'm trying to save our ESXi server configuration using the command vicfg - cfgbackup.pl, but I got the error 'bad hostname' after entering the password. Here's my output to the screen. What I am doing wrong?

  C:\Program Files (x 86) \VMware\VMware vSphere CLI\bin > vicfg - cfgbackup.pl - Server

  192.168.75.18 - username = root s c:\ESXi_test1_backup.txt =

  Enter the password:

  Error to connect to the server " " https://=192.168.75.18/sdk/webService': Bad hostn

  SOUL

  C:\Program Files (x 86) \VMware\VMware vSphere CLI\bin >

  Is 192.168.75.18 the IP address of your ESXi host (without typos etc.) and is this place works?

  Probably you have an error in the command line you entered, the error message print "https://=192.168...

  The '=' in front of the INVESTIGATION period does not, maybe you have entered - Server == 192.168... ?

  
  

• Details of port SAN Switch of vSphere or ESXi

  The way I see my network switch name & port details to which my ESXi network cards are connected via CDP.

  With the help of vSphere or ESXi command in any case I can check SAN switch of details in the SAN switch name & ports Details to which my ESXi storage HBA cards are connected?

  They are Cisco MDS 9513 SAN switches, you know a plugin or a way to see who?

  Yes, using the plugin VIEW, take a look: Cisco DCNM rocks | Jeremy Waldrop & #039; s Blog

• bad, ugly of vSphere good ESXi,

  We plan to make our upgrade from ESX 3.5 to vSphere with ESXi.

  Our environment is 25-35 guests, especially HP and some Dell.

  What would we be careful with ESXi (in addition to not having a console and scripts, etc.)?  Limits?

  I think it will take a bit of getting used to vCLI and vMA since we have been accustomed to the console on the host since ESX 2.0.  I had heard some security problems associated with ESXi, but I don't remember where I heard that someone has any information that might be useful?

  Besides the ESXi Chronicles Blog, someone has good blogs, etc. especially recommended for ESXi?

  BTW - are going to change the name of vSpherei?

  I think SSL/SSH is safe enough.

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

• P2V conversion of variable with the physical air to ESXi VirtualCenter environment using a laptop as the converter/transport

  Hello

  I'm looking at a collection of physical servers for migration to a virtualized environment: the goal is to move from a huge collection of 30-40 physical servers of different brand/model/specification and physically scattered in many places for a single grid filled with boxes of ESXi.

  I have a question about the best way to conduct the physical to the virtual conversation process (don't worry - looking for high level only indicatively!).

  For the bottom, 30-40 physical servers are not connected/not related in terms of operating system (ie. not a member of a common domain, run multiple operating systems - for most variants of Windows NT4/2000/2003 etc) but are connected to the same physical network infrastructure and all contribute to a common function. In short they can each be considered in the sense of functional servers 'specific application.  Further and I think very important to mention, the current environment and the new rack/rigging are (to be) exploited isolation - IE. Air-ajar.

  I see my new rack running DL380s running ESXi and images on a San shared and connected them via a dedicated switch. with a VirtualCenter instance server in there somewhere to hang together... not sure at this stage as to where I should do that in a Machine virtual itself (preferable to reduce the hardware requirements), or if a physical process adding unique 'management' style server would be more appropriate.  I also have a laptop to 'manage' the environment which will be connected to the switch on an ad hoc basis.

  I want to be able to do is use this notebook to go to each of the existing physical servers in turn (connection on its network switch) and create a virtual image of it (hot or cold, although I guess the cold option seems nicer than the existing server remains completely intact) before resuming the laptop computer to the virtual test bench , and then "push" the virtual image in VirtualCenter and on an ESXi host (with any post import etc. reconfiguration tasks that may be required).  I'm not sure what components I need where to do this - specifically which allows me to capture the physical server while having no connectivity with the VirtualCenter Server?  I've read through documentation/notes Converter Enterprise - this would be the correct way to go?  If so I should the Converter Enterprise Server component installed on the VirtualCenter server or the laptop itself (ie. What must be connected to what during the capture process?) ?  Or is there a simpler approach of independent style should I watch?

  All advice/aid/comments greatly appreciated in advance!

  Simon

  Hello

  See http://itknowledgeexchange.techtarget.com/virtualization-pro/secure-method-to-p2v-across-security-zones/ for assistance. Indeed, you have the same situation. All you need is one VMware Converter.

  Best regards

  Edward L. Haletky

  VMware communities user moderator

  ====

  Author of the book "VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.»

  SearchVMware Blog: http://itknowledgeexchange.techtarget.com/virtualization-pro/

  Articles of blue Gears - http://www.itworld.com/ and http://www.networkworld.com/community/haletky

  As well as virtualization at http://www.astroarch.com/wiki/index.php/Virtualization Wiki

• How to make a zoom in on part of the image using editing?

  Recently returned to the opening.  Do not remember how to enlarge the part of the image using editing.  If the answer is Loupe tool, please remind me how it works.

  What version of Aperture do you use?

  To zoom the viewer enter the combination of keys command - + (⌘ +) or press the zoom-viewer:

  

  If you prefer the magnifying glass, launching it from the view menu with "view Magnifier, where also find magnifying glass options to switch to a centered Loupe or show the grid under the microscope.

  

• Vectorize an image using Labview

  Hello world!

  So, I work with a 3D cutting machine (Roland MDX - 15) and I'm supposed to design a program that can load images and burn them on a piece of wood using Roland MDX - 15.

  What I've done, is to create a program where you can draw a picture using the tools of sketch of Labview and the machine will sculpt.

  The machine is capable of carving the image using vectors (she follows lines point by point).

  Now, I have to do the same thing, but an image that I have load in Labview. Therefore, I need to vectorize the image so that the machine gets a set of lines to draw. A program that is already it is Dr.Engrave (see youtube if you need to understand what I need).

  So, anybody know a 'simple' way to transform an image into a set of vectors?

  Thanks in advance!

  Valentine

  Hello VGans,

  I assumed that when you talk of tracing any edge detection method would be allowed to help you get started.

  If it is a false assumption, then let me know.

  Keeping this in mind:

  Already taken a peek at the "IMAQ CannyEdgeDetection' VI?

  This could be a good starting point for tracing purposes.

  Can you let me know if that's what you're looking for?

• some computers cannot acquire images using the PCI-1410

  I have a big problem in the acquisition of the images using the PCI-1410.

  It was a standard camera (SONY XC-ES). The test of the device is OK with my computer.

  I can not get a correct image via MAX. Also, I try to use the file of the camera for that camera.

  But it did not work properly.

  I consulted it toward the Korea of NEITHER and they discover THAT PCI-1410 worked properly with different computers.

  So, I try to change PC. Most of my computers cannot acquire the image even if the unit is OK of MAX.

  However, only a few computer works properly. (Work computers are from SAMSUNG. The other

  computers that did not work propely, were assembled in the lab.) (I have tested almost 6 computers for this purpose.)

  The problem is that there are at least 3-4 PCI ports for our applications. The work computer (SAMSUN) only has 2 ports PCI.

  What should I do to select the right computers? I can't buy dozens of computers to test the PCI-1410.

  Why is this kind of problem occurs?

  Thanks in advance for your advice. (Email: [email protected])

  Hello

  We also had a lot of problems in the past with different PCs and the problem came from the motherboard. Since that time, we only use motherboards with intel because we know that labview works very well with them.

  It was 2 or 3 years ago, and I thought that the problem has been resolved since then... you know the type of motherboards you use?

• How do write an image bank 2d images using maton indexing or other type of indexation. Please help me, I'm stuck my project with this problem?

  Dear friends,

  I'm in a phase of my project of mtech evil. How can make a large image 2d draws from small images by indexing. (just like arrays\matrix, etc.). I have only 16 small images in my library. I want to do the big picture of mosaic of smaller images with appropriate indexing. I think to make a large image in Formate of table 2d (100 * 100 images) of small images using indexing. Anyone CAN HELP me IT WILL REALLY appreciable

  URS faithfully

  Ragil

  The question is more how you want that they be indexed like that?

  1 > 2 > 3 >... > 15 > 16 > 1 > 2...

  5>6>......

  or

  1 > 2 > 3 > 4 > 5

  2 > 3 > 4 > 5

  3 > 4 > 5

  4 > 5

  5

  or another type of indexing

• Continuous imaging using vision builder

  Hello, I use NI 1744 and want to know how to get and record continuous images using Vision Builder. I am in a position to acquire and maintain a single image but cannot acquire continuous images.
  Looking forward for your help.

  Bürki,

  You try to save the images continuously as a movie?  This is not supported in VBAI, however if you want to align continuous images individually you can try to change your pattern of State inspection to repeat your current inspection and the transition to the stage stop only after that your current inspection was conducted a defined number of times.

• Acquisition of images using PCI-1426 and Camera Link Camera

  Hello

  I am writing a program to capture images of a Camera Link camera via the PCI 1426 acquisition card in LabVIEW. The problem that I am facing is that I am unable to find the correct controls in the functions palette to start the image capture. Could someone tell me please how much control I'm supposed to use?

  I've worked on similar request sometimes back, I used IEEE 1394 camera, so once I found the correct block diagram controls I should be able to go from there.

  Thanks in advance,

  Sandeep

  Hello Kristen,

  Thanks for the suggestion. I was able to solve this problem. I think that was what was causing the problem I have LabVIEW 8.6 installed on my system and he had the Vision Acquisition System (VAS) 8.5.1. But, once I installed VAS 8.6 I saw the IMAQ in the functions palette.

  I'm guessing that LabVIEW 8.6 does not recognize the toolboxes of previous versions.

  Sandeep

• Which is faster a bit manipulation to the table or image using the vision

  I have to perform an operation on an image.  It involves the calculation of the new locations for the pixels for each pixel of the image.  Which is the fastest way to do it.  Manipulate the pixels as elements of the array for loops, or manipulate the pixels of an image using vision tools?

  Thank you.

  Hello

  If you can use vision tools to make the manipulation of pixels, it is much faster.

  Vladimir

• Windows dvd maker problem: I hear but not image using windows DVD maker.

  I can hear but not image using windows DVD maker. A few obvious reasons? It's strange because it used to work and now a few months later it does not. The image is there in the start menu of the main menu, just before you press play it starts to play sound with no photos after I press play. Please help, steve gratefully.

  original title:
  Windows dvd maker problem

  Maybe the part "What to do if you have questions" of the following
  article would offer some ideas.

  How to burn DVDs with Windows DVD Maker
  http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker

• How to make an image using the camera on my pc

  I want to take a picture of my laptop but cannot find the button

  Hi carolewyne

   

  1. What are the brand and model of the laptop?

  2. you have software installed for the camera to use?

   

  If you want to take a photo using the camera in the phone, then maybe you should use a utility support for the device that is provided by the manufacturer. It will help you get the image using the camera. You can visit the manufacturer's Web site and download the software for the device is functioning correctly.

   

  I hope this helps.