VSphere host has no backup errors

Similar Questions

• EARN 8 x 64 (host system), VMware 9.0.2.build - 1031769: Vmdk file has internal consistency errors

  Hello

  I frequently encounter the following error message:

  The disc "D:\VMware\Windows 7.vmdk" has thick internal errors that could be caused by a partial corruption of the disk file. It is recommended that you restore a backup of the virtual machine. If you do not have a backup, VMware Workstation allows you to repair the disk, but it is possible that the data on the disc may be corrupt and affect the stability of the guest.

  You want to repair the drive and continue?

  Yes/No.

  What is the reason for this problem? How to solve this problem?

  Just a quick question. Looks like you experience this problem on different hard files! Assuming you are using to access virus scan software, you already excludes files with the extensions * .vm are analyzed? Also, you can choose to run chkdsk c: /f to rule out the possibility of problems of file system on the host computer. Once the host file system has been checked, you can download an older version of vmware-vdiskmanager under the "Attachments" section of the VMware KB: repair of a virtual disk Workstation 7.1 and Fusion 3.1 and try to repair the virtual disk with this version. Make sure that you back up the virtual disk before you run the repair order to retreat if necessary.

  André

• "Receive the error message" Microsoft (R) HTML Application host has encountered a problem and needs to close, etc. "when you access user accounts

  Original title: I can't access the accounts of users (XP).

  I can not access (XP) user accounts.  I get the message: "Microsoft (R) HTML Application host has encountered a problem and needs to close etc.."  The APPname is mshta.exe. I have this msg when I click on anything in the user accounts.

  1. What is the problem?
  2. what should I do to fix this?

  Hello Eric_984,

  Thank you for the question!

  It is disheartening to know that have problems you with user accounts. "As I understand it, you get an error message" Microsoft (R) HTML Application host has encountered a problem and needs to close etc. "when you access user accounts.

  I need to ask you a question to help you best.

  Were there any changes (hardware or software) to the computer before the show?

  Perform the steps in the link and check.

  Error message when you try to open the item user accounts in Control Panel on a Windows XP-based computer: "Microsoft HTML Application host has encountered a problem and needs to close."

  Answer to us if you are having problems with user accounts or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Each time after clicking the icon of user account on windows xp to change a password is crashes with this error message: Microsoft (R) HTML Application host has encountered a problem and needs to close.

  Each time after clicking the icon of user account on windows xp to change a password is crashes with this error message: Microsoft (R) HTML Application host has encountered a problem and needs to close.

  There is a Microsoft Knowledge base article which sets up a few steps to perform in the computer in order to solve the problem you are experiencing, read the article that you find on the link I am mentioning below and see if it helps the measures mentioned:

  http://support.Microsoft.com/kb/919751

• Please help: System freezes with error message "generic host process for win32 services has encountered an error and needs to close."

  Please can anyone offer help - whenever I start my PC it freezes
  then displays an error message "generic host process for win32 services has.
  encountered an error and needs to close. »

  In this error message, I get more information:

  szAppName: svchost.exe szAppVer: 5.1.2600.2180 szModName: ntdll.dll
  szModVer: 5.1.2600.2180 offset: 000122ba

  more information:

  C:\DOCUME~1\Joe\LOCALS~1\Temp\WERd9dd.dir00\svchost.exe.mdmp
  C:\DOCUME~1\Joe\LOCALS~1\Temp\WERd9dd.dir00\appcompat.txt

  I tried a lot of things: update drivers, run Ccleaner to check the registry,.
  checked for malware, Virus, uninstall xp service pack 3... Is there
  anything else I can try?

  After I clicked through the error messages above appears the taskbar
  Crash, then reappears, but with graphic reduction (gray color)

  I checked "Event Viewer" in "control panel" from here I get
  the following error message:

  Failed application svchost.exe, version 5.1.2600.2180, failed module
  ntdll.dll, version 5.1.2600.2180, fault 0x000122ba address.

  0000: 41 70 70 6 c 69 63 61 74 Applicat
  0008: 69 6th 6f 20 46 61 69 6 c ion Fail
  0010: 75 72 65 20 20 73 76 63 ure svc
  0018: 68 6f 73 74 2nd 65 78 65 host.exe
  0020: 20 35 2 2 31 32 36 30 5.1.260
  0028: 30 2 32 31 38 30 20 69 0.2180 I
  0030: 6th 6f 20 74 64 6 c 6 c 2nd n ntdll.
  0038: 64 6 c 6 c 20 35 2e 31 2nd dll 5.1.
  0040: 32 36 30 30 2 32 31 38 2600.218
  0048: 30 20 61 74 6f 20 66 66 0-off
  0050: 73 65 74 20 30 30 30 31 the value 0001
  0058: 32 32 62 61 22ba

  also an another error at the time of the accident

  0000: 42 75 63 6 b 65 74 3 has 20 bucket:
  0008: 31 32 39 36 37 35 38 33 12967583
  0010: 36 0D 0 to 6...

  Fault 129675836 bucket.

  I am extremely grateful for any help, this problem is about to drive me
  crazy!

  I solved my problem...

  To temporarily disable closing kick, after that the warning popup will appear, I went the prompt commands and typed in 'shutdown-a' so I could help out.

  Then I went in under the Application Event Viewer and saw that some services weird I don't need anyway did not start because they had missing information/dll registry info.  It was originally the svchost.exe service to fail (and default recovery for this is to reboot)

  I stopped the weird service (in this case, it was Hello) because I didn't need anyway, and went into the properties of this service and past earlier in "Manual" "automatic".

  Good luck

• Generic Host Process for Win32 Services has encountered an error and needs close.__Unable to access windows update through the site or automatic updates.

  Hi, I really need help.

  My computer has been giving me problems recently.

  I get a random error message: Generic Host Process for Win32 Services has encountered an error and needs to close.

  My taskbar would turn gray and I cannot control the volume.

  I checked the event viewer, and this is what has been shown:

  Failing application svchost.exe, version 5.1.2600.5512, failed module ntdll.dll, version 5.1.2600.5755, address failure 0 x 00023845.

  %

  Hi E_G_G_S,

  1. did you of recent changes on the computer?

  2. when the taskbar turns gray?

  3. have you printer connected to the computer?

  Method 1

  See the Microsoft articles below and try the steps mentioned them, check if it works very well.

  Error messages when you start a Windows XP-based computer and then try to download Windows updates

  http://support.Microsoft.com/kb/931852

  Generic host process error message and a flashlight icon appear

  http://support.Microsoft.com/kb/821690

  Method 2

  Even after following the steps above if you are unable to access volume control and taskbar gray towers I suggest you check it persists in safe mode.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Printer error: "Print filter Pipeline host has stopped working" Dell V505 whatever that means and what is the fix?

  Printer error: "Print filter Pipeline host has stopped working" Dell V505 whatever that means and what is the fix?

  frohnj,

  See if This THREAD helps. It is for another printer, but should work for you printer, too.

  Rick

• Try to change the mouse settings in Control Panel, receive the error "windows rundll.exe host has stopped working".

  When I go into the control panel to change my settings for the mouse, I get the error "windows rundll.exe host has stopped working", therefore, you cannot change the mouse settings, how do I fix it?  My mouse is out of control! :)

  * original title - why windows will not host rundll.exe I would change my settings of the mouse? *

  Hello

  If you use 3rd party mouse drivers updated or reinstall those who, like Logitech, Microsoft
  Wireless and so on.

  =================================================================

  To solve the problems:

  If your: Windows host process Rundll32 has stopped working
  http://www.WinVistaClub.com/T40.html

  What is rundll32.exe and why it works?
  http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/

  What is the suspicious Rundll32.exe process?
  http://WindowsXP.MVPs.org/Rundll32.htm

  -----------------------------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------

  If no joy trying to determine what is the cause:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right
  Click on taskbar - task manager - take a look at stored by - Services - process -.
  It's a quick reference (if you have a small box left - show for all users, then
  Check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see who are loading is method 2 - using MSCONFIG then after a
  a list of these here.
  --------------------------------------------------------------------

  Tools that should help you:

  Objects of process Explorer - free - find out what files, registry keys and other processes
  have open, which DLLs they have loaded and more. This exceptionally effective utility will be
  even show you who owns each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured so that it starts automatically when your
  system boots and you log in. Autoruns is also the full list of registry and files
  locations where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL activity
  in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded
  automatically when Windows starts. For each request, the following information
  appears: product Type of startup (registry/Startup folder), Command - Line String,
  Name, file Version, company name, location in the registry or the file system and more.
  It allows you to easily disable or remove unwanted programs that run in your Windows
  startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not.
  The window Watcher says it all, every window created by all programs that are running, the statement
  If the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

• "previous installation of host services has detected the error.

  I posted this in the beta forum and not answer. I'll try here... Here is the link to the beta forum: http://communities.vmware.com/thread/278405

  Try to uninstall a component, vShield, in this example, the portion of Port Group isolation. I get the following error:

  "previous installation of host services has detected the error.

  ESXi V4.1

  VMkernel is on a dvSwitch

  Thank you

  Mike

  THIS ONLY if APPLIES to vShield Zones / App vShield

  One last thing, you mentioned this announcement on the beta site which tells me that you had a pre - GA on areas/App version installed. If that were the case, or maybe a previous installation of App/areas (Beta) had an installation/uninstallation failed, then do this procedure to clean the host of all the previous components.

  1. remove the vmservice-vswitch created during installation (assuming that there is no other device that uses this vswitch)

  2 remove the address 169.x.x.x, given the Net.DVFilterBindIpAddress of the host property.

  Detailed procedure:

  1. go through the uninstall process each time as

  possible (if one of the components to show as it is installed). Then go to the

  next steps.

  2. search for the vmservice-vswitch and delete

  it. it is a vSwitch without physical adapters service that was created

  during the installation. It will have 2 groups of ports, one called

  vmservice-vmknic-pg and the other vmservice vsheild pg.

  3. Select the ESX host on the left hand side

  tree on the right hand click the Configuration tab pane and click

  Advanced settings of the software. In the Advaced search page settings

  the Net section, then select it. Scroll through all the

  way down and then make your way up until you find

  Net.DVFilterBindIpAddress = 169.254.1.1. Remove the 169.254.1.1 and

  Click OK.

  4. installation of APP vShield vShield Zones should now work.

• vSphere Host Update Utility - ERROR: not enough space on the boot partition

  I get the following error when I run the host update utility

  ERROR: Not enough space on the boot partition

  The boot partition doesn't have enough space to store initrd.img.

  Expected free space (MB): 50, found: 44

  I can free until you reach the required amount?

  Send the output of this command:

  DF h

  And the version of ESX 3.x

  See also this KB (there are a few tips on where space can be lost):

  http://KB.VMware.com/kb/1016511

  André

• Cannot use windows backup error: 0 x 80070002 the system cannot find the file specified

  Original title: Backup failed, error code but no NVIDIA chipset

  Whenever I try to use the Windows backup utility, I get a failure with the error code 0 x 80070002 and "the system cannot find the specified files" - I found KB976972, which refers to these two messages, and I have all the conditions specified here EXCEPT that I don't have an NVIDIA USB Enhanced Host controller Interface (EHCI) chipset.   I advanced and tried the hotfix download referred to in article, but he wouldn't because he did not to my system.   I don't seem to find any other KB articles that are relevant.   I have a lot of space on the external hard drive that I am backup.    Would appreciate any help.

  Win7 Backup - error. (0 x 80070002) - cannot find the file specified.
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/bff71aac-c78e-42bd-A959-116019c93478

  ====================================================================

  Norton Ghost version 15 - has a 30 day trial available
  http://www.Symantec.com/Norton/Ghost
  Media: CDR/RW, DVD + R/RW, Blu - Ray, USB and FireWire® devices (IEEE 1394), Iomega Zip® and Jaz® drives
  (Note: trial does not create a Bootable restore CD you will need to restore the image)
  http://www.Symantec.com/Norton/downloads/trialsoftware/register.jsp?PVID=ghost15
  User Guide: ftp://ftp.symantec.com/public/english_us_canada/products/ghost/15/manuals/ngh_15_user_guide.pdf

  Acronis True Image 2012 - has a fully functional trial version of 30 days available.
  (Note: install Acronis and then create a bootable media restoration/rescue CD before you start creating your first image backup)
  http://www.Acronis.com/homecomputing/products/
  30-day trial: http://www.acronis.com/homecomputing/products/#tryorbuy
  True Image User Guides and documentation:
  http://www.Acronis.com/support/documentation/index.html

  Ghost 15 product review
  http://www.PCWorld.com/reviews/product/384118/review/Norton_Ghost_15.html
  Ghost 15 screenshots:
  http://www.Softpedia.com/get/system/back-up-and-recovery/Symantec-Norton-Ghost.shtml

  Acronis True Image Home 2012 product review:
  http://www.whatsabyte.com/P1/ATI_2012_Review.html
  http://www.allacronis.com/Acronis-True-Image-home-review.php

  Acronis True Image Seagate Edition (drive Assistant)
  http://www.Seagate.com/www/en-us/support/downloads/DiscWizard

  Acronis True Image edition of Western Digital (WD)
  http://support.wdc.com/product/downloaddetail.asp?Swid=119&wdc_lang=en

  Also copy disc to disc with Norton Ghost
  http://Service1.Symantec.com/support/PowerQuest.nsf/docid/2004111701520562?OpenDocument&src=hot&prod=Norton+Ghost&ver=10.0&CSM=no&SEG=HHO

  Free alternatives:
  EASEUS Todo Backup Home V3
  (Note: Todo Install, then create a diskette "emergency" before you start creating your first image backup)
  http://www.TODO-backup.com/products/home/free-backup-software.htm

  Untested alternatives
  Reflect disk imaging:
  http://www.Macrium.com/reflectfree.asp

  Paragon Backup & Recovery Free Edition:
  http://www.Paragon-Software.com/home/DB-Express/download.htm

  J W Stuart: http://www.pagestart.com

• "unable to complete backup" error Code 0 x 80070002

  Original title:

  Error 0 x 80070002

  Windows 7 Home Premium Version

  Seagate external hard drive / software Acronis

  I am unable to complete my WIndows 7 Home Prem to backup on my Segate external drive.  63% in the backup, I get "unable to complete backup" error Code 0 x 80070002.  How can I get my support to end?

  Hello

  Welcome to the Microsoft Community Forums.

  From your post, it seems that the backup is not complete and give you an error code: 0 x 80070002.

  Quick questions:

  1. What is the full error message?

  2. how many profiles user is there is your computer?

  3. What Backup program do you use?

  This problem may occur if:

  Cause of scenario 1

  This problem occurs if you save a library that contains custom folders that are located under your user profile.

  Cause of scenario 2

  This problem occurs if the following conditions are met:

  ·         Backup Windows tries to back up files in folders LocalLow, Contacts and research.

  ·         These files are not present on your computer.

  Note These files are only created if certain applications are installed on the computer.

  Cause of scenario 3

  This problem occurs if the following conditions are met:

  ·         The computer has an NVIDIA USB EHCI Enhanced Host Controller Interface () chipset.

  ·         The computer has at least 4 GB of RAM.

  ·         You try to copy data from the computer to an external USB storage device.

  If you use the Windows backup program then please go and follow the methods mentioned below and later a update on the State of the question.

  Method 1: 0x8100002F error code and error code 0 x 80070002 when you back up files in Windows 7:http://support.microsoft.com/kb/979281

  Method 2: Try to run the check disk on the system using the link below.

  Check your hard drive for errors: http://windows.microsoft.com/en-US/windows7/Check-a-drive-for-errors

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Hope that it helps post back if you have questions about Windows and we will be happy to help you.

• Help: The ESXi host has no persistent storage

  We have an ESXI 5.0 installed on our Dell server and we have some virtual machines running. suddenly, we had a mistake on Vsphere client.

  "EXSI host has no persistent storage.

  To run the virtual machine, create at least a data store for the maintenance of the machines virtual and other system files. »

  to resolve this problem, so we tried.

  On Vsphere client (connected to the ESXI)-> configuration-> storage-> rescan all... once the re-scanner has been done.

  We are able to see the file was mounted on the data store and it is lost in a minute. so it isn't permanently mounted to the data store to access the virtual machine.

  Once we do the re-scan once again, we saw that the file has been fitted to the data store and lost again.

  assemble and disassemble is to continue to switch.

  We need a solution to fix the problem, or in the worst case we need a way to recover the Esxi machine (VMS) data.

  Kindly share the reflections.

  It should be a disk error, it is local storage that tempt you and the virtual machine files are stored in the local disk

  don't forget to check the logs on the bit/ucs, regardless of the remote management tool, you use...

  Please check the log files and vobd.log vmkernel

• Unable to connect to the MKS: the certificate of the remote host has these problems:

  Hello

  We have a host of ESXi 4 cluster running any vSphere 4.1.  Recently, I started to upgrade to update 2 and all the additional fixes.  After the upgrade of the vCentre server to the latest version (or maybe before I can't noticed) an of are hosts began to show the following error whenever I tried to connect to the console of any guest on this host.

  Unable to connect to the MKS: the certificate of the remote host has these problems:

  It lists any problems at all and no error display in the event log that it simply does not work.  I had a prod around the internet and found nothing.  I then rebuilt the host to exclude and the problem remains.

  Any help would be much appreciated.

  Thanks in advance

  David

  If you can connect to the Console remotely using VMware Infrastructure (VI) Client connected directly to the host, take a look at vmware KB to connect to a remote virtual machine fails with the error: the certificate of the remote host has these problems

  but more generally - remove host to vCenter inventory and then add the host to the back, take a look at opening in the console of the virtual machine after a new installation of ESXi or ESX fails with the error: the host certificate chain is not complete and could not connect to the MKS: the certificate of the remote host has these problems

• Suddenly cannot send mail. Message 4.7.1: Recipient address rejected: rejection policy - your host has been blacklisted for e-mail abuse.

  When I try to send a message an error box apperars:

  An error occurred while sending mail. The mail server responded:
  4.7.1 < ***@***.com >: recipient address rejected: rejection policy - your host has been blacklisted for e-mail abuse. Please configure your email client to use authentication SASL - contact support if in doubt how...

  Please check the message recipient "*********@******.com" and try again.
  

  This happened while I was sending about #3 4 or 5 that I must send. Nothing I know has been changed has been changed! I have downloaded the latest version while I was in the program.

  This seems to be a message from a server. The word 'host' is not clear to me. In the language of networking, it can mean your own computer, but more generally, it could mean your ISP provider or by e-mail.

  Anyway, this means that something has decided that you are, or are on a network that has been identified as a source of spam. I suggest that ask you this from your ISP.