Vulnerabilities in the "gadgets" have been corrected?

Similar Questions

• Had computer problems, they have been corrected, but I have no sound icon on the toolbar. How can I get an icon?

  Had problems with my computer, they have been corrected, but I have no sound icon on the toolbar. How can I recover this icon?

  Control Panel > wounds etc. > display the icon in the systray (or similar) is checked.

  If for any reason any who does not, re-post giving error messages that may appear when you try to play a song or video.

  See you soon,.
  Jerry

• No pilot of the plane have been found.

  No pilot of the plane have been found. Make sure that the installation media contains the correct driver, and then click OK.

  Hi CraigKeller,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/no-device-drivers-were-found-when-trying-to/5b105b56-a0cc-441b-8559-ca5feac9105a

  I hope this helps!

• Some of the icons have been replaced on my desk a Logos Reader Adobe! For example when I click on Chrome, the error message dispalayed is "ADOBE READER could not open"Chrome.exe"because it is not a file type supported or because the wire"

  Some of the icons have been replaced on my desk a Logos Reader Adobe! For example when I click on Chrome, the error message dispalayed is "ADOBE READER could not open"Chrome.exe"because it is not a supported type file or because the file has been sent as an attachment to e-mail and has not been correctly decoded).  I need help to solve this problem of Odessa.

  Hi umeshb4300232,

  Try the steps of troubleshooting mentioned in this KB doc. https://helpx.Adobe.com/Acrobat/KB/application-file-icons-change-Acrobat.html

  Kind regards

  Nicos

• It seems iPhotos can where the photos have been tokens without GPS information?

  I had to travel to Iceland two weeks ago.  I had turned on my 6s iPhoone, while GPS receiver.

  The picture on my iPhone and my Macbook Air can identify where I toke the photos to see the name of the place that I toke the photos and place the thumbnails to the right position on a map.   That's great!

  But I can't find that there is GPS data in each photo EXIF Info!   I tried to read the GPS data by using the command line or from an extract tool: exiftool...    NO GPS data in photos EXIF Info!

  Why can't data from GPS location in photos exif info, while the pictures can say where the photos have been symbolic?

  The reason why I want to dig the GPS data in the photos I have token by iPhone 6 s is:

  my camera does not have a GPS receiver to build-in.   I want to get the GPS data in the token of photos from iPhone 6s then write on photos without GPS data using tools such as exiftools.

  Thank you for your time.

  Li

  But I can't find that there is GPS data in each photo EXIF Info!   I tried to read the GPS data by using the command line or from an extract tool: exiftool...    NO GPS data in photos EXIF Info!

  Most of my photos iPhone 5s is the GPS tags display. How you have exported photos to see the EXIF data?

  When you export the edited versions, select "location information". File > export > export... photos.

  

  When you export the originals (file > export non-original), activate the sidecar file.

  Then you should be able to see the GPS values with exiftool or outline:

  

  The first pictures after activating the iPhone have no tags GPS, if you the dishes inside or the iPhone has not yet found enough GPS satellites.

• Cannot open any programs, I think that somehow the files have been changed to .lnk files

  Original title: I'm unable to open programs in my Start Menu.

  When I click on an item in the beginning, all programs selection and click it, instead of opening, I get the name of the program, for example Microsoft Works... LNK and that's all I get the program never opens.  I think somehow that the files have been changed to .lnk files but do not know how it happened

  This happened for several months and I'm sure that there is an easy solution to return to what it was but don't know what.  I tried the system restore, but that did nothing and don't know what to do next.  Any ideas?  Thank you... betseyd112

  original title:. LNK files

  Hello

  1. what operating system you are using on the computer?
  2. did you of recent changes on the computer before this problem?
  3 are you facing this problem with a particular program or all programs?
   
  See the methods and check if that helps.
  Method 1: refer to the article for help.
  When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program
  http://support.Microsoft.com/kb/950505
   
  If the problem persists, create a new user account and check if that helps.
   
   
  Method 2
  Create a new user account-
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
  If you are not faced with the same question in a new user account, you can view the link below and use the steps provided to fix a corrupted - user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
   
  Let us know the status of the issue.

• How can I add text to photos save to JPEG? The photos have been imported into my computer from a mobile phone

  How can I add text to photos save to JPEG? The photos have been imported into my computer from a mobile phone

  Hello

  What operating system do you use?

  You can use the paint on windows feature to add text on the pictures.

  Reference:
  http://Windows.Microsoft.com/en-us/Windows7/products/features/paint (you can also use this article for windows vista)
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/app_paintbrush.mspx?mfr=true
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/mspaint_overview.mspx?mfr=true

• OFFICE 2003 UPDATES NOT INSTALLi WILL have carried out a search for the KB numbers is not found has tried to find where the updates have been downloaded, not at the office and not in the section windows software, then

  4 updates for office 2003 will not install update for the junk e-mail in Microsoft Office Outlook 2003 (KB974771) filter
  Update of security for Microsoft Office 2003 (KB972580)
  Update of security for Microsoft Office 2003 (KB974554)
  Update of security for Microsoft Office Outlook 2003 (KB973705) I searched the KB numbers, not found tried to find where the updates have been downloaded, not at the office and not in the software section windows, so I am at a loss, the small yellow shield keeps saying updates are ready for download
  I am at a loss of what everything else is fine, that I have set for automatic notification of updates, then let me chose to download.
  for any help or suggestion would be greatly appreciated.
  Thank you very much * address email is removed from the privacy *.

  Download the 4 four updates and install them manually.

  IE: http://www.microsoft.com/downloads/en/results.aspx?freetext=KB974771&displaylang=en&stype=s_basic

  Just look for the other 3 three, download to a place you can find and install manually the same.

  Taursie TaurArian [MVP] 2005-2010 - Update Services

• Windows cannot connect to the printer. The name of the printer has been correctly entered, or the specified printer has lost its connection to the server.

  A Windows Server 2003 Standard Edition SP2 32-bit computer is a field, the file and print server.

  A computer on the domain is a machine of Windows 7 Ultimate 64 - bit with HP DesignJet 500 24 printer connected via USB.  The printer is running the latest firmware.  The PC is running the latest 64-bit drivers with no problems to the host machine printing.  The host also has the latest drivers 32-bit (x 86) installed by downloading by other computers on the network.  The printer is configured to share with the share name of HPDJ500.

  Now, on a machine Windows XP Pro SP3 32 bit on the field, I'm trying to connect to the shared printer.  Add a printer > click Next in the wizard of > check "a network printer or a printer attached to another computer" and then click Next > click on "Find a printer in the directory", then click Next > click Find now > HPDJ500 in the list below (the XP machine can see the shared printer on the Windows 7 computer!) and click OK.  At this point, I get an error that says: "Windows cannot connect to the printer.  The name of the printer has been correctly entered, or the specified printer has lost its connection to the server.  For more information, click Help. »

  Alternatively, if I right-click on the HPDJ500 printer listed, then click on connect, I get the same error message but I also see a separate window that says "Connecting to HPDJ500 on H2.ws.net" with the lively projector.  This window also disappears as soon as I clear the error message.

  Please note that this printer worked perfectly as a printer shared, hosted on a machine XP 32 bit on the field.  It works perfectly for the new Windows 7 64-bit machine, but we cannot connect from anywhere else on the network (including the server which translates the same exact error message).  On the server, I also preinstalled drivers thinking there was a problem with a 32-bit computer, trying to grasp the correct drivers from the host 64-bit Windows 7, but that doesn't change anything.

  How connect to this printer?

  Try using the path UNC path of the printer in the Add Printer Wizard.

  Add a printer > network printer > connection to this printer ((deuxieme point)

  Click next to browse (leave blank, the name field) or type the UNC path of the printer (i.e. \\Computername\Printername) path

• Photo Gallery-tags used for photos of the Windows remain even if the photos have been removed

  Picture of Windows Gallery__

  Tags used for photos stay in the computer even if the photos have been removed.  The remaining tags in UNROLLING in the space where you can enter a tag are no longer relevant and are just a nuisance.

  Tags used for photos stay in the computer even if the photos have been removed.  The remaining tags in UNROLLING in the space where you can enter a tag are no longer relevant and are just a nuisance.

  =================================
  Rename the database library file will force
  Photo Gallery to create a new file the next time, he is
  launched.

  Anyway... the following article explains how to find
  Pictures.PD4:

  Stops Windows Live Photo Gallery (944221)
  answer or does not start
  http://support.Microsoft.com/kb/944221/en-us

  After Renaming Pictures.pd4 you will need to re-catalogue
  your photos and some tags may be lost. If the name change
  Pictures.PD4 does not solve the problem... you can delete
  the new Pictures.pd4 file and change the name of the
  origin to Pictures.pd4 and the catalog file should
  be restored.

  In later versions of Windows Live Photo Gallery...
  the name of the file is Pictures.pd5.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How findout if all the partitions have been deleted and now a laptop that has Windows 8 operating system using Windows Vista with a shell IE 9?

  I bought a laptop broken at a friend's House. It is not used for the operating system windows 8 and wanted to use the Windows Vista operating system. Son of friends put in place this laptop for it, which was new when she bought in a retail store. Is there a way I can find out whether all the partitions have been deleted during the installation of Vista? I still see window 8 logo that I sign as an administrator user on this laptop.

  When I log on this computer, the previous owner of the screen name is the only one that appears. I go in Control Panel, click Add another account, then I see the screen name I posted. I could use the WiFi from my PC at home that Win 7 OS.

  When I started working with the laptop, I was able to bring control of the camera. Now I thought that the version that I use does not allow this operation. Be happy with any Positive help with my problems.

  Thank you

  Phil W.

  Hello

  Start > type CMD

  Right click on CMD and select run as administrator

  Type diskmgmt.msc

  Press enter

  This opens where you can view the partitions on the disk management system

  Who has installed Windows Vista, your son or friend?  Fact that they create a dual boot environment or reformat?

  http://www.technorms.com/8438/Windows-8-create-hard-drive-partition

  Multibooting requires separate partitions on the hard drive of your computer for each operating system.  To create and format a partition, see create and format a hard disk partition.

  To check if a dual boot system in place, start > Type msconfig

  Click on the Startup tab

  You see two operating systems listed?  Windows 8, Windows Vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/how-to-change-default-OS-for-dual-boot-system/

  I think that Windows 8 has the following partitions

  400 MB Partition Recovery (contains recovery information dated from before my upgrade)

  • 300 MB EFI System Partition
  • 350 MB Partition Recovery (contains information for recovery of my upgrade)
  • 17 GB Partition Recovery
  • 220 GB of Partition primary

  Windows Vista has drive C and drive D

  Done reformatting refers to a hard disk or partition that already has been formatted or that contains data on it. Reformatting a disk deletes all the data on the disk.

• After all the steps have been made and I clicked 'launch' I get the following message "Setup has detected that a machine restate may be waiting."  Exit Setup, restart your computer and try to reinstall.  What is a 'install '? and how do I

  After all the steps have been made and I clicked 'launch' I get the following message "Setup has detected that a machine restate may be waiting."  Exit Setup, restart your computer and try to reinstall.  What is a 'install '? and how to leave it. ?  I try to install 14 items. Anita

  If present, click the ignore button and check.

  No button ignore? If possible, please post a screenshot of the error.

• My sensitive page is slightly off-center and the margins have been set to auto.

  My sensitive page is slightly off-center and the margins have been set to auto.

  The width of the box is 1200.

  It seems very well on some computers, but on others its slightly to the right.

  Could we brilliant people here take a look and offer a remedy?

  Your help is deeply appreciated.

  Link is smaller than the page in question

  http://www.dankeithwilliams.com/gregoryart/

  Thank you

  When the screen is at least 1220px everywhere, the page is perfectly centered. The smaller screens don't display the page in the same way because, as you said quite rightly, the container has been set to 1200px - the extra 20px is used for the scroll bar.

  This means that the page is far from being reactive.

  My suggestion would be to create a really responsive design, this can be achieved using queries or media using a framework like Bootstrap. There are also commercial alternatives such as

  • http://www.DMXzone.com/go/22360/DMXzone-bootstrap-3 or
  • Responsive Web Design Extensions, applications, modules and Plugins for Dreamweaver

• Until a few days ago I was able to print a PDF from Acrobat Reader ms in Windows 7.  Now I get "the document could not be printed."  The next panel says "there are no pages selected to print," even if all the pages have been selected.  Thoughts?

  Until a few days ago I was able to print a PDF from Acrobat Reader ms in Windows 7.  Now I get "the document could not be printed."  The next panel says "there are no pages selected to print," even if all the pages have been selected.  I've uninstalled Reader and reinstalled, but the problem remains.  I also tried to repair the installation and that doesn't work anymore.

  Thanks for the tip.  It turned out that kind Reader has been commissioning in protected mode.  I changed the setting and it prints now as before.

  Thank you

• How can I activate a check box if the data have been entered in a different text field?

  Hello. I would use four check boxes on a form, each of which will enable (check) if the data have been entered in four text fields of form on a different page in the same form.

  Example:

  Page 1 will have a question like... How many apples did you eat last month? "Text1" = 3

  So, given that the user has responded to 3 in the field 'text1', "checkbox1" must now be verified on page 2.

  ... and so on for the other three.

  Note: The answers to the questions will be like a number. If the user enters 0 (zero), then I don't want the boxes to activate it. So, any greater than zero response will check the checkbox.

  Follow-up to question...

  Is it possible for a text field quite different form whether visible or not visible (default read-only text) based on the status of each check box mentioned above?

  Example:

  "checkbox1" will have a field of text next to it named "date1" with a date hidden. If "checkbox1" is checked (because of the above), then the date will be visible.

  ... and so on for the other three.

  Thank you very much!

  -You can use something like this as the custom of your text field validation script:

  if (event.value=="3") this.getField("checkbox1").checkThisBox(0, true);
  

  -Yes, but you shouldn't make it dependent on the box to check, but integrate it in the script above, like this:

  if (event.value=="3") {
      this.getField("checkbox1").checkThisBox(0, true);
      this.getField("date1").display = display.visible;
  } else {
      this.getField("date1").display = display.hidden;
  }
  

  If you also want to uncheck the checkbox where the value of the text field is not 3 then double online #2 but with the false instead of true value in the else block.