W/128 MB GeForce 9300GE question

Similar Questions

• Update Windows KB915597 disabled my card (nVidia GeForce 9300GE) graphics

  Reposted
  Hi, after updated windows updated 10/19/09 my graphics card has been disabled (nVidia GeForce 9300GE). I tried to activate the device, prompting the update driver, and the update failed to install the device became "not recognized".  I restored the system before the update and everything was ok until the PC has been stopped and restarted.  I have been through the process of restoring about 6 times, each time, try another way of preventing recurrence for example turn off the automatic updates, uninstall KB915597, etc., but nothing works. Is there a permanent solution to this mess?
  PS my system is Vista on a 64-bit AMD Phenom X 4 processor.
  Thank you

  Hello

  Uninstall the driver of graphics completely, and then restart the computer.
  Then re-install the graphics card driver by downloading from:
  http://www.nvidia.com/download/index.aspx?lang=en-us

  If this does not help then repair of Vista:
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  Hope this helps!

• WINDOWS UPDATE error: failed to update NVIDIA GEFORCE 9300GE

  I was warned by MS Update, I have an optional update for install.

  When I tried to install the updated driver, I got a code error 800705 b 4; However, the MANAGER of DEVICES displays the new driver was installed and is waiting for a restart, but still WINDOWS UPDATE he says IMPOSSIBLE.
  This what should I believe?
  Thank you
  Dan

  You are welcome.

  Here is some information that I put in place on a good way to use Windows updates:

  You do not have to install an update problem will continue to cause problems for you.

  Is there a way to get around that.

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

   

  Here's how to change the update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• Alienware 17 i7 4710hq Turbo question

  Hello

  I just got a laptop Alienware 17. Specifications are:

  i4710hq

  gtx980m

  16 gig RAM

  Windows 8

  1 tb + 128 SSD

  My question is about the process of turbo and how its active or if I allow it. I have done a ton of research about this, but can't seem to find a solid answer.

  . The i7 4710hq lies 2.4 Ghz (goes to 3.5 If Turbo).

  . With the graphics of Alienware amplifier it automatically gets boosted at the coast of 3.5. I opted not to buy it because of the budget at the time.

  . According to intels Internet, wiki and a few other tech forums, I've met. 4710hq i7 will stimulate automatically itself at or near the 3.5 as appropriate.

  Under the BIOS settings he has shown to turbo whenever a graphics amplifier is connected and showed a specific set of options related to the graphicis amplifier. But it only shows the turbo for the amplifier of graphics options.

  Just below those set of options mentions an option for overclocking of Intel processor on the route and it sees that it is . Do I need to activate this for in order for the Turbo to be active? Or is it something different entirely?

  Thank you

  From my experience, it should list differently.  There should be a selection to turn the Turbo Boost feature in the BIOS.  Here is the site for manuals online:

  I didn't know that Turbo Boost listed anywhere in the BIOS setting in the section of the manual.  Who said to me that either A. Its automatic and you can't turn it off (thus it is not in the BIOS) or b. His disability is permanent unless you get the amplifier, but that would make no sense for me.  I hope that someone else might have a better answer?

• Qosmio G20: CPU too high with video usage

  Hello

  I've got G20 (2.13 Ghz processor) and nVidia 128 MB GeForce Go 6600 and I noticed that when you run video that my CPU utilization goes up high enough. View tv goes up to about 80%, video in media player substantially the same, but the video clips on Web sites and sites with video banner Web can get up to 100%.

  I don't know if this normal that I had not really noticed before, but lately, with this hot weather, I found that on the days hottest occasionally my system stopped, probably because the fan may not follow.

  My question is if these ages CPU usage % are normal for this system, or I have some setting wrong that puts the load on the processor and not the graphics card. Can someone tell me if I can check how the video processing is done by the graphics card or how I can assure that this is the work and only in passing on overloading the CPU.

  Thank you very much.

  PS I am running the latest drivers video for this machine, obtained from the Toshiba draft.exe page.

  Hi William

  I had a lot of experiences with Qosmio G20 and activity of the CPU under pressure. With the use of the highest processor unit was never overheated just a little harder because of cooling fan.

  As you know Qosmio G20 is powerful multimedia and video unit problem described in your message is really strange. If you wrote that you don't l l notice that before, I assume your personal configuration is responsible for this. On this path, it is not easy to say why this is happening. Try to check the processes running and at the end all of them you don't need. On this way the CPU use should be much lower.

• Point of mystery of material; an HP product. that I can't find a support.

  Hello

  I have a video card that I can't find except in passing mentions, with further references obscure motherboard chipsets. Some web sites seem to contradict what type of map this thing really is, and I have no way to say for sure at this point.

  From what I can tell, this is a 256 MB PCIe 1.0 'GeForce 9300GE', HP P/N: 466851-001; Blue PCB color, active cooling fan and heatsink combo, low-profile-ish heat, HDMI and 'LCD' (this is what is engraved on the metal on the side stand side of the orifice) ports available.

  This thing is no longer supported by HP? Can I somehow verify the characteristics of the map, I've since lost the documentation on this?
  
  And Yes, this is an older video card, but happens in an older system, and it is a notch above the car video that currently has in any case. It is a temporary side-grade until I win the lottery, what can I say?

  Thank you.

  Hello:

  It's everything I could find about it.

  http://www.CNET.com/graphics-cards/NVIDIA-GeForce-9300-GE/4507-8902_7-33749618.html

  I would like to get the latest drivers from nVidia.

  http://www.nvidia.com/download/index.aspx?lang=en-us

  Paul

• Satellite Pro M30 - HDD upgrade up to 160 GB

  Hello

  I have a portable Satellite Pro M30 and I want to move the hard drive to the maximum size supported.

  As I see from previous posts of the preinstalled bios supports up to 128 GB, so the questions are:

  1A everyone updated bios to support larger sizes (e.g. 160 GB)?

  2. the link suggested for bios updates (http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_bios.jsp?service=EU) does not provide an option for the M30 (only M70) series. So what one do I download for M30?

  Thank you

  Hello

  First update the BIOS will not help you get a possibility of using a 160 GB HARD drive.
  The fact is that the M30 Pro Sam has an interface IDE (ATA-5) and this HARD drive controller supports LBA the28bit
  So in my opinion the 160 GB only are not supported.

  By the way;
  You can find the BIOS and the driver for the Pro M30 sitting on the Toshiba driver page.
  But to look for the area of _ARCHIVE_!

  Concerning

• Graphics card driver

  Hi, I need to get drivers for my Nvidia GEforce 9300ge updated, but when I am gone to look for the driver from nvidia.com their installation wizard not would allow me to move forward by saying that it was not compatible with my version of windows (Vista 64 - bit).  I came across the site of HP and a driver did check my pc but your softward says I need a driver for an ATI graphics card.

  I really need this driver and im not sure if I should go ahead with your ATI driver, or if there is another way to install the nvidia driver, or if I just need to break down and buy windows 7 comes to install this driver. Thank you for your help in advance.

  Hi Little_Gray

  This should be the correct driver.

  http://www.nvidia.com/object/Win7-WinVista-32bit-260.89-WHQL-driver.html

  Click Download, and then click on accept and download.

  Let me know how you go.

  Best wishes

  DP - K

• Winlogon, csrss duplicate restarts continuously

  I recorded a video of the show happening: http://www.youtube.com/watch?v=AcQVGRy00vs

  You can see in the video that there is double csrss and winlogon reboot all the time.
  I also recorded the processes with procmon, but the log file is larger than 500 MB!
  I think that the conflict software it is, but I could be wrong. I've not found why exactly what is happening.
  All csrss and winlogon processes use the user 'NT\SYSTEM authority'.
  A scan with Microsoft security essentials and rescue disk Kaspersky returned 0 infection.
  Tool detecting Microsoft GDI + only reports "no vulnerable software.
  ran sfc/scannow a couple of times
  Operating system
  MS Windows XP Professional SP3 32-bit

  CENTRAL PROCESSING UNIT

  AMD Athlon 64 3200 + 40 ° C

  Winchester 90nm technology

  RAM

  2.00 GB Dual-Channel DDR @ 166 MHz (2, 5-3-3-7)

  Motherboard

  ASUSTeK Computer Inc. A8V Deluxe (Socket 939) 40 ° C

  Graphics

  L1952TX (1280x1024@60Hz)

  128 MB GeForce 6800 GT (ASUStek Computer Inc.)

  Hard drives

  244GB Western Digital WDC WD25 00KS-00MJB0 SCSI Disk Device (SATA) 28 ° C

  244GB Seagate ST325082 3AS SCSI Disk Device (SATA) 31 ° C

  Optical drives

  SONY DVD RW DRU-820

  Audio

  ASUS Xonar DG peripheral Audio
  Graphics

  Monitor

  Name L1952TX on NVIDIA GeForce 6800 GT

  Course resolution 1280 x 1024 pixels

  Work the resolution 1280 x 964 pixels

  Active state, primary, output devices support

  Width of the screen 1280

  Height of the screen 1024

  Monitor the BPP 32 bits per pixel

  Monitoring frequency 60 Hz

  Device \\.\DISPLAY1\Monitor0

  GeForce 6800 GT

  NV40 GPU

  Deviceid 10DE-0045

  Revision A2

  Subprovider ASUStek Computer Inc. (1043)

  Output current level 1

  GPU current clock 350 MHz

  Memory current clock 700 MHz

  130 nm technology

  Die size 287 nm²

  Transistors to 222 M

  Release date 2004

  Support for DirectX 9.0 c

  DirectX Shader Model 3.0

  OpenGL 2.0 support

  Bus AGP interface

  Opening AGP 128 MB

  Rate of the AGP 8 x

  GPU clock 350 MHz

  Memory clock 700 MHz

  Nv4_disp.dll Driver

  6.14.11.8208 driver version

  ForceWare 182.08 version

  5.40.02.15.00 BIOS version

  ROPs 8

  8/Pixel Vertex shaders 8

  Memory Type GDDR3

  128 MB memory

  256 Bit bus width

  Pixel Fillrate 2.8 GPixels/sec

  Texture Fillrate 2.8 GTexels/s

  44.8 GB/s bandwidth

  Number of performance levels: 1

  Level 0

  GPU clock 350 MHz

  Memory clock 700 MHz

  Hey people - I think I just found the answer (for me anyway):

  http://www.TomsHardware.com/Forum/267056-45-problem-Csrss-Winlogon-related

  I got RDP active (and port-forwarded through my router using port TCP 3389).  I disabled the port-forward and the process csrss and winlogon restarts immediately.  So basically, I got someone to try the RDP session openings on my machine.

  -Paul

• I'll be able to upgrade graphics card for my HP Pavillion to NVIDIA GTX 550 Ti m8530f

  Ive looked all over the web without success on a variety of graphics cards that I can install on my desktop. Ive had my eye on NVIDIA GTX 550 Ti, but I need to know if I can get some good graphics out of my machine

  Data sheet:

  Windows Vista Edition home premium

  5120 system memory

  1 TB harddrive

  NVIDIA GeForce 9300GE (Hybrid SLI)

  Hello

  The motherboard in your PC has a not very good history.

  Open your PC and do some measure to ensure that the GTX 550 will adjust.  This EVGA is a good model, but the ear there are other brands just as good.  The map is 8.25 "long.  The adjacent slot on the PCI-E x 16 slot must be vacant.

  You will need a bigger power supply.  A 500 Watt power supply should be sufficient for the GTX 550.

  Look at this Corsair CX500. It's good quality food.

  You need to open your PC and measure the physical dimensions of your diet.  Here is a list of the things to consider:

  1. Specifications
  2. Total power - important
  3. amperage 12 + v - important
  4. Modular - is not required, but I like the flexibility
  5. Warranty
  6. I7 and SLI ready
  7. Efficiency rating
  8. Cost
  9. The physical size - standard ATX PSU is 5.5 "by 5.9" by 3.4 "give or take a few tenths
  10. Only one + 12 volt rail is a better choice.

  www.Newegg.com has many choices of power supplies.  Corsair, OCZ, Rosewill, Thermaltake...

  How to replace a power supply.

  How to replace a video card.

• Help graphic/video card for Inspiron 1520

  I was wondering if I could install a NVIDIA GeForce 8800 GTS with 640 MB of RAM on my Inspiron 1520 (or is it just for the desktop)?

  When I click on the parts and upgrades for your dell it shows me just two graphics cards. One is that I have already installed (128 MB GeForce 8400 M GS graphics card) and the other is the 256 MB GeForce 8600 M GT graphics card.

  I ask this is because I want to try to play Crysis on my laptop, but my current video card is LOW!

  
  

• CS5.5, 10-bit, AVCIntra, AJA Kona and GTX580 vs Quadro

  I'm buying a new computer in June. I am passage of Final Cut Pro on Mac. Why am I spending? For many reasons, but suffice it to say, CS5.5 is really looking like a time saver and seems to make good sense of business together. And being independent, I do not really on in line with any dogmatic camp (FCP or Avid, etc.).

  I work a lot with AVCIntra (10-bit) images and content (also 10-bit) generated by 3D provided by customer. I have an AJA Kona convince (supporting 10 bit) installed.

  I read a lot about the vs Quadro GeForce and understand that there is not much advantage to one Quadro, other then the advantage extra for 3D applications. And Geforces are 8-bit and 10-bit Quadro. So price wise, the 580 Geforce for CS5.5 is probably my best bet.

  My main questions are: PProCS5.5 is fully support 10-bit, end-to-end? And if the GeForce is only 8 bits (although I saw somewhere the 580 can support 10-bit), it will have an impact in time real MPE reading will appear on the AJA Kona card? With the installed AJA Kona Iraq, is important to all that I have a 8-bit or 10-bit GPU card?

  On a side note, there are a GTC590 now, with Dual GPU. Someone at - it tested yet with the hack? Or will it be the same problem as with SLI GeForces not supported by the body?

  There is a second side, I know people ask a lot about the best material to use. I read a lot of posts about them. Most of them are pretty old posts. From May 2011, any recommendations on components? Such as motherboards, raid, manufacturer of GTX580 cards etc. ? But I'm particularly interested to know if the i7 X 6-core 990 is worth the investment, compared to the 2nd gen 4-core i7 2600 K? I assume Yes. But have never seen in real world tests. And a dual Xeon really would be twice as fast? Wise investment, just like the Geforce Quadro question vs, I don't know that it is worth 3 times the price for probably less then two times the speed. Any comments?

  Thank you all,.

  I talked to Blackmagic and their IO cards and all are probably independent of the OGL 10 bits of Adobe pull request. This means that you would be fine using I/O without a Quadro to 10bits overview of the output.

  Eric

  ADK

• New video card unsolved mystery...

  Still I was wondering why my new video card is in my computer acting like the old...

  Installed a BFG NVIDIA 512 MB GeForce 8800 GT OC to replace my stock NVIDIA 128 MB GeForce graphics card 7300 THE.

  Yes, I did the driver cleaner. Yes, I uninstalled the game before that I added new material so that the game would be to 'See' the new hardware at startup. etc etc etc.

  It's funny, I go into control panel / appearance and personalization/customization/display settings and see what follows: Dell E228WFP on NViDIA GeForce 7300LE. ??? I shouldn't see my new videocard listed here? So I click "Advanced settings" and see the tab map: Type of card "NVIDIA GeForce 7300 THE. Although if I click on the Properties tab, I don't see GeForce 8800 listed.

  Under adapter information I also see the chip Type: Geforce 8800 GT.

  And under the string of the card I also see the GeForce 8800 GT.

  Also, when I go to Device Manager and click on graphics cards I see GeForce 8800 GT and it is listed as working properly.

  But I can't tell any difference in my graphics and it's getting frustrating...

  Why I still see the old graphics card 7300LE listed in some of these areas?

  Watersign

  
  

• hash with very large internal table plan causes ORA-01652

  Hello
  
  We have a select with dubious plan:
  
  SELECT * FROM T1 where T1. F1 in (select T2. F1 T2)
  
  Plan:
  | ID | Operation | Name | Lines | Bytes | TempSpc | Cost |
  | 0 | SELECT STATEMENT | 59 M | 12G | 1 401 K |
  | 1. SEMI HASH JOIN | 59 M | 12G | 55G | 1 401 K |
  | 2. TABLE ACCESS FULL | T1 | 260 M | 52G | 489K |
  | 3. TABLE ACCESS FULL | T2 | 209K | 1843K | 84.
  
  As you see a record 260 million (52 GB) T1 and T2 has approximately 200,000 records (approximately 2 MB)
  Oracle chooses the hash with T1 inner table join. Thus all T1 is tempted to read first in memory.
  And when the memory is full, the TEMP tablespace is filled.
  And because the TEMP tablespace is less than 55 GB, an error has occurred:
  ORA-01652: unable to extend segment temp of 128 in tablespace TEMP
  
  Question:
  Why oracle choose the hash with inner table so big join?
  And how can we solve this problem?
  
  Other notes:
  T1 and T2 is analyzed today.
  Presumably no index or table.
  The database is Oracle 9i Enterprise.
  Description of Oracle 9i hash (first there are more small table as you can see):
  http://download.Oracle.com/docs/CD/B10501_01/server.920/a96533/optimops.htm#76074
  
  THX: sides.

  Hello

  Oracle 9i cannot make HASH JOIN RIGHT SEMI - were introduced in 10g.

  ----------------------------------------------------------------------------------------------------------------------------
  | Id  | Operation             | Name | Starts | E-Rows | A-Rows |   A-Time   | Buffers | Reads  |  OMem |  1Mem | Used-Mem |
  ----------------------------------------------------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT      |      |      1 |        |      1 |00:00:55.73 |     162K|    162K|       |       |          |
  |   1 |  SORT AGGREGATE       |      |      1 |      1 |      1 |00:00:55.73 |     162K|    162K|       |       |          |
  |*  2 |   HASH JOIN RIGHT SEMI|      |      1 |   8147 |      0 |00:00:55.73 |     162K|    162K|   988K|   988K| 1031K (0)|
  |   3 |    TABLE ACCESS FULL  | T2   |      1 |     18 |     18 |00:00:00.01 |       3 |      0 |       |       |          |
  |   4 |    TABLE ACCESS FULL  | T    |      1 |     11M|     11M|00:02:09.99 |     162K|    162K|       |       |          |
  ----------------------------------------------------------------------------------------------------------------------------
  
  Predicate Information (identified by operation id):
  ---------------------------------------------------
  
     2 - access("OBJECT_NAME"="USERNAME")
  

• Tecra S2: How to change the card Nvidia Geforce Go 6600 64 MB to 128 MB

  Can anyone here help me how to change toshiba tecra S2 vga nvidia geforce go 6600 64 MB to 128 MB?

  Please help me, it's important to me.

  Best regards

  Thank you... for everyone

  Well, what to say.
  A GPU upgrade is usually undesirable because no one can tell if the laptop would be stable after this replacement. So generally I would not recommend doing these upgrades.