W500 - port modem USB mod

Similar Questions

• I deleted by mistake com6 usb modem com port, now when I troubleshoot it shows no modem usb driver not found.

  I deleted by mistake com6 usb modem com port, now when I troubleshoot it shows no modem usb driver not found.

  Usually, by unplugging the USB device and plug it in then that she return to should force Windows redo the settings.

• HP 230W docking station USB 3 port works in usb mode 2

  Hello

  I have a HP 8770W laptop and I bought a docking station HP 230 on amazon (this docking station: http://h30094.www3.hp.com/product.aspx?sku=10432928&pagemode=ca)

  also this page mentions that are all 4 ports usb, usb docking station 3

  but when I insert a usb device in them that works on usb mode 2

  computer laptop usb 3 ports works well by themselves, but host usb ports 3 station always operate in mode usb 2...

  and also there's no guarantee

  so is it possible to fix or at least try to solve this problem?

  Thank you

  Hello Ali_AlipourR

  Thanks for posting on the HP Forums!

  I understand that you have a problem with your laptop. However, since it is a commercial laptop, you should post your question on the map cell of the HP Enterprise Forums for a better answer.

  Have a wonderful day!

  Mario

• Problem with the files not showing (after changing the USB mode)

  I have a sansa fuze 4 GB. version V02.01.09A. OS: Vista Service Pack 1. My rocket was working fine until about a week ago, when it stopped charging. but after installing the new norton 360 sansa is more appeared in my computer or Windows media player at all. I tried updating the driver but it says that the pilot was already up to date. I tried other USB ports again (front and rear), did not work. I decided to change the USB mode and it has finally started to load again in MSC mode.

  now, for the problem I currently have and, when I click on sansa via my computer and go to the music folder, it says "this folder is empty". I unplugged and watched in my music list, and all the music is there. I tried to put a new song on the player, disconnected, and when looking through the songs of the player the new song is here. I reconnected it, the new song is in the music folder, but the other songs are not listed. In addition, I have a microSD card that is listed as "o" in the car, all the songs I had on this appear, but not those on memory internal to the sansa.

  How can I get again list all music files in the folder?

  Note: I do not sync as it has only some of the songs I want on my sansa. the way I add songs is to copy and paste to the folder of the sansa player

  Okay, I don't know why or how, but it works now in MTP mode. I saw you are solutions, but I decided I'll just change the mode before trying to have ideas. until I reconnected it I also removed the microSD card, and it worked perfectly (make a backup of my songs). the problem could have the sd card in all this time?

• my support of modem usb, USB 1.1, but it does not work on windows 7 to the motherboard desktop h61

  my support of modem usb, USB 1.1, but it does not work on windows 7 to the card mother h61 with duel core 2nd computer office prossesor genration

  If your USB modem is provided by your ISP, check for an Ethernet RJ45 port. If the modem doesn't, connect a RJ45 connection between the modem and the computer cable and UNPLUG the USB cable. Your computer should now connect to the Internet without any problem...

• Driver Modem USB HSF for CX-9Z-NR0226 on Windows/8 not found.

  Apparently the dongle USB, Conexant, manufacturer is not a driver for

  Driver Modem USB HSF for CX-9Z-NR0226 on Windows/8 device.
  It came with a CD with the drivers on this subject in the directories: CX-FU02, CX-FU02 +, FU06, PCIE Modem and USB Modem CX_D400. and none of the drivers on the CD works with the device.
  My Lenovo laptop came with a connection via modem to this topic.
  Someone at - he found a way to run a software modem using this device?
  -Is Allen is-

  Hello

  Given that Windows 8 is a new version could not be applications/drivers designed for Windows 8. You can install application designed for an earlier version of Windows in Windows 8 by using compatibility mode. Follow the steps.

  (a) access to the start screen

  (b) press Windows key + C on your keyboard to show the charms (if you have a touch screen: touch the right edge of your screen and slide your finger to the center of the screen to display the bar of charms)

  (c) search for troubleshooting, click settings in the right-hand column.

  (d) click on troubleshooting. Click on run programs for previous versions of Windows.

  (e) click Next, select do not appear. Click Next.

  (f) click Browse and select the installation program that you downloaded via the link above.

  (g) click Next, click the troubleshooting program.

  (h) check the program worked in earlier versions of Windows but won't install or run now box.

  (i) click Next, select the latest operating system known to work (probably Windows 7)

  (j) click Next.

  Please refer to the article below:

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows

  Please let me know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved in Microsoft Windows.

• A satellite - modem USB sometimes unrecognized

  Nice day

  I have a modem USB Vodafone running on a version beta of Windows 7 and worked great until one or the other Windows update. Now, when I paste in it sometimes and sometimes not seen in my computer, but my thing, I see that it is connected but wana doesn't do a thing.
  Everyone has the same kind of problem?

  What can I do?

  Hello

  What laptop you have exactly?

  Well, it's really hard to say what it is because you are only running beta OS that can contain a lot of problems. Windows 7 isn't out yet and so it of also a bit more difficult to get drivers or support.

  But you have installed a driver for the modem? Normally, you can use the Windows Vista drivers. Most of them are also work on Windows 7.
  I recommend also updating the chipset driver. You can also try the Vista version on the Toshiba page.

  Good bye

• HP 15-AC610TU: what port is usb 3.0 on HP 15-AC610TU laptop

  I can't understend what port is usb 3.0 on HP 15-AC610TU laptop. You kindly would you say?

  Hello

  Left side, number 7, page 6

  7 should be USB 3.0

  http://h10032.www1.HP.com/CTG/manual/c04650558

• port eSATA/USB combo T410?

  It is listed in the specifications as a port eSATA/USB combo.

  I looked at the port and I don't see how a USB connector can fit in there.

  While this means exactly?

  

  Its ok. Ive discovered that in fact it is not a combo Harbour.

  Thank you.

  http://forums.Lenovo.com/T5/T400-T500-and-newer-T-series/is-the-eSATA-in-the-T510-powered-or-non-POW...

• Error modem usb device trying to stall usb fax modem fax modem usb sytem. system could not find driver any idea on how to down load the driver I

  Usb modem error device tries to install usb fax modem usb fax modem cannot find system the pilot any idea on how to load the driver?

  Hello

  What brand / model of the fax machine?  What is a printer/Fax?

  Download the software complete features driver from the manufacturer's website.  It contains the fax driver.

  What version of Windows are you using?

• Device driver tarjeta inteligente para modem USB Huawei E1612

  ¿Controlador tarjeta para modem USB Huawei E 1612 intelijente no hay?

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

  Please, select su idioma in her lista desplegable anterior to send you in el idioma of choice su pregunta. El foro Québec ha published're para frances only. If usted no encuentra el idioma no desee por encima of las options para support otros destinos international themselves can find following el siguiente enlace:

  http://support.Microsoft.com/common/international.aspx

  Gracias

• Structure of the menu of the Sansa Clip +: change USB Mode no display

  Hey,.

  I have a Sansa Clip + with a display of death.

  I need to change the USB Mode of DPW, Meteorological Service of the Canada.

  Can someone please tell me the structure of the menu in order to change the USB Mode put down using the screen?

  Other clues would be appreciated.

  Thank you!

  I just found the solution:

  Sansa Clip +.
  1. turn off the device.
  2 press and hold the Center button while connecting the device to the computer.

  http://KB.SanDisk.com/app/answers/detail/A_ID/61/~/enabling-or-forcing-MSC-mode-on-your-Sansa-player

  So now I can install Rockbox and set up the clip + so that it displays all the entries menu...

• Sansa e280 is not usb mode in the menu settings and is not recognized by pc

  My sansa e280 is recognized by my pc where it was originally regestered, but is not recognized by another identical pc. It also has no usb mode in the settings menu, so I couldn't use the suggested by forum solution.

  Thank you very much! I understand it on my own through the main page of Sansa.com. Now, after the last firmware download it has 3 settings/USB modes: detect the DPW, msc and auto. Still no problem on my PC. The another, unfortunately, is 5000 miles away. Hope, it will work here, too. Thanks again.

• No USB mode choose?

  Hello, I want to hook my m4 Xperia radio with usb, but first, I need to change the mode (file type, by default on SD card, don't ask me because I am not an expert but I know what to do). So the problem is theres no option to change my phone it don't miss (how?). I'll upload screenshot soon.

  Hello

  I'm afraid there is no setting to change the USB connection mode. The phone only supports MTP as connectivity USB mode.

• Linksys CM100 Cable Modem USB if it works on Windows 7

  IM upgrading vista to windows 7... will my linksys cm100 works on windows 7.

  Hi jackjam,

  Linksys CM100 Cable Modem USB is compatible with Windows 7.

  For more information, see the link:

  http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=Linksys%20CM100%20USB%20Cable%20Modem&v=Linksys&uid=CM100&l=en-US&pf=0&pi=13&c=Networking&sc=Modems&os=32-bit

  You can also run the Upgrade Advisor before you perform an upgrade installation. It scans your PC for potential issues with your hardware, devices, installed programs and recommends what to do before upgrade you.

  See the link to download the Upgrade Advisor:

  Windows 7 Upgrade Advisor

  Also check out the link:

  Upgrade Windows Vista to Windows 7

  Hope this information is useful.