HP 15-AC610TU: what port is usb 3.0 on HP 15-AC610TU laptop

Similar Questions

• Pavilion g - what port is USB 3.0?

  the HP Pavilion has three USB ports - including two on the left side, one on the right side.

  Two of them are supposed to be USB 3.0 for fast transfer of files.

  But... What is the USB 3.0?

  Take a close look on the physical port.

  SS next to a USB symbol indicates a usb 3.0 port. If the key of the port is blue, it is also an indicator of usb 3.0.

  SS represents the specification super speed (up to5 Gbps).

  Best regards
  ERICO

• What about the USB 3.0? HP ProBook 4530 s this product to have a USB 3.0 port?

  What about the USB 3.0?
  HP ProBook 4530 s
  Serial number: {removed privacy}

  OS Windows 7 Home premium (Original)

  This product do actually have USB 3.0 port? If so, how do I install drivers for that?

  In the specifications of this model, I can see that there is a USB 3.0 port.
  All 4 usb ports work correctly but I don't see anything like USB 3.0 in Bus USB controllers in Device Manager, I tried to install "ftp://ftp.hp.com/pub/softpaq/sp53501-54000/sp53671.exe" from the drivers for my product download page. It doesn't change anything in the device but installed a Manager application called "USB 3.0 Host Control Utility" when I opened, it displays a "warning!" Dialog box saying "not found USB 3.0 host controller '.

  Why is this?

  This product do actually have USB 3.0 port? If so, how do I install drivers for that?

  Yes, it is possible that she has a PIN 9 without support 3.0.

  Like I said before, all the usb 3.0 ports that I saw and work at speeds 3.0 have a blue plastic insert.

  

• Pavilion dv7 - 6243cl Entertainm: Ports of USB 3.0

  Documentation on my machine is extremely poor.  I believe that with 4 USB Ports, 2 USB 3.0.    The documentation does not clearly what are the USB 3.0 ports.    I think that the two on the left, near the HDMI connector are 3.0, but I'm not sure.   I sent this question last week at HP, but of course didn't get any answer.  Is anyone know for sure?   Is there a good way to test the ports?

  Thank you

  You can usually identify the USB 3.0 ports in one of two ways. Either they have a SS (super speed) icon next to them:

  

  Or the small tab of plastic inside is contrasting, usually blue in color.

  On your model of USB 3 ports are on the left of the user that you face the screen and lower speed ports are on the right.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Driver files that run the parallel port and USB port

  In the system information utility where to look to find the parallel port and the port driver USB, name of file that manages these?

  Know the drivers specific, is only half the story.  Why you looking for these drivers?  You have problems with your parallel port or USB port?  This can be caused by problems with drivers or it could be a hardware problem (hard to diagnose a hardware problem without good parts to swap and test).  If you need to update the drivers, you must use device (not msinfo32) Manager - or maybe clicking on an executable file that loads the drivers automatically (depends on how it is sent by download).

  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need drivers (I assume that you want to the parallel port and USB ports), get the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.  Or run the Setup program of driver provided by the vendor of the computer or the manufacturer of the device.  Be VERY careful get Vista compatible drivers for these devices are difficult to identify (they usually come with the numbers of model or something like that if they can have serial numbers) and using the wrong drivers could make the problem (whatever that is) worse.

  If you update the drivers succerssfully and the problem persists, then it is probably a hardware problem.  In this case, contact the manufacturer of your computer for technical support (hopeully it is still under warranty) or bring it to a professional computer repairman (NOT Geek Squad or one of those big store centers because they don't really know what they're doing and charge a lot for this level of expertise) to have the components tested and possibly replaced.

  I hlpe that aid.

  Good luck! Lorien - MCSA/MCSE/network + / A +.

• USB 0001 virtual port for UsB not found

  When inatalling a Xerox Phaser 8560DN to my laptop HP Win 7 professinal it does not find the virtual USB 0001 port for UsB. I installed the printer even to other laptops and no prblem. When you come to select the port the virtual prot is tehre but not so much in this laptop and HP peole say it is not their problem. Any suggestions on what to do?

  Hello

  You don't see any other virtual ports except USB 0001?

  Follow these steps and check if that helps:

  1. go in Control Panel.
  2 Select all Control Panel items.
  3. open devices and printers.
  4. at the top of the window, select Add a printer.
  5. Select Add a local printer.
  6. If you want to choose a Printer Port, select use an existing port.
  7. in the drop-down list, select USB001 or USB0002 (virtual printer to USB Port).
  8. Select the next button.
  9. in the manufacturers section, select HP.
  10. in the printers section, search for your printer model and select it.

  Note: If your printer does not appear in the list of HP, select nearest LaserJet series model number.

  Click the Windows Update button. WU get the database driver for all HP printers.

  Note: the search may take a while.

  When the search is complete, go back to the HP section and your printer should now appear there. Select it and click the next button.

  Your printer appears in the printer name box, click Next again and the printer will be installed.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• What port mini display of brand to HDMI cable should I use?

  What port mini display of brand to HDMI cable should I use?

  Besides Apple, Belkin seems to have good reviews.

  Ciao.

• port eSATA/USB combo T410?

  It is listed in the specifications as a port eSATA/USB combo.

  I looked at the port and I don't see how a USB connector can fit in there.

  While this means exactly?

  

  Its ok. Ive discovered that in fact it is not a combo Harbour.

  Thank you.

  http://forums.Lenovo.com/T5/T400-T500-and-newer-T-series/is-the-eSATA-in-the-T510-powered-or-non-POW...

• Exactly what ports are used to communicate with a cRIO?

  Can you provide this information (or point me to it). I want to implement a cRIO remotely through the internet, and I put it behind a firewall. I would like to know exactly what ports need to be forwarded to allow MAX to connect (when I say that it connects directly to a URL).

  Thank you

  Chris

  Chris

  Show This Article in the Knowledge Base that software ports OR use. Please refer to the Kb for more details.

  The cRIO, guests using

  44525 (discovery of target device Ethernet)

  3079 (front of LabVIEW RT TCP connections)

  3580 (OR Locator Service)

  80 (LabVIEW Web server)

  96 (FPGA compile server)

  (3537 if using VISA)

  (81 if you use Internet toolkit)

  (20 and 21 If you use FTP server).

  What are the Ports I need to open on my Firewall for National Instruments software products?

• Programmatically determine what port of entry has been selected

  I use the default sequential model which has two entry points, Test DUT and Single Pass. I would like to determine in my sequence of what entry point has been selected by the operator. It is possible to programmatically determine what port of entry has been chosen, and if so where is that hidden in the massive TestStand API and properties?

  I would have preferred the entry point name to return.

  As long as you're MainSequence, then you can use RunState.Caller.Sequence.Name

  Otherwise, use RunState.Root.Sequence.Name

• What PCMCIA or USB DAQ card to buy?

  For the purposes of my project, I would like read 2 quadrature encoders and
  2 analog outputs (0 to + 5 V) duty to control 2 Motors simultaneously.
  What PCMCIA or USB card that you would recommend for me?

  The PCI card that I used for the same project was the NI PCI-6221.

  6221 USB would correspond to my needs?

  Best regards
  Fotio

  Yes, that should be fine. You can always visit the DAQ hardware page to find the material for the acquisition of data appropriate for the needs of your project.

• What converter to usb 2.0 cable connects to a sidewinder 3D pro joystick 15-pin gameport in addition?

  I want to connect the controller on a PC with no game port, only USB under Windows 7 Home Premium.  I need to find an appropriate converter cable, so I can check if the gamepad will work.

  Sorry to resurrect this thread but I have done some research on this recently and cam on this.

  The answer to that is a bit complicated.

  MS produced a joystick (followed by "3D Pro") which has been converted (boxed) as "precision Pro" However if you looked under the name embossed control lever was "3D Pro Plus.  This joystick is not easily compatible USB.  The follow-up of the joystick, which looked identical, was marked below as 'Precision Pro' and it came with a simple USB adapter (as simple as just a series of wires that connect the game Joystick Port and a USB key).

  Obviously care must be taken when buying or the other of these second hand as most sellers describe the item based on the name used in the box that has been 'Precision Pro'.  But I think that this last unit compatible USB had written on the box.

  Individual units can be identified by the name embossed on the underside of the unit and the first 5 letters of the product (also below) Id:

  Product ID: 97482-xxx is a "3D Pro Plus" - NOT USB compatible.

  Product ID: 85791-xxx is a 'Precision Pro' - compatible with a simple adapter USB.

  The follow-up of the 'precision Pro' was the ' precision 2 "was only USB but this was a new physical unit and would suffer the more static accumulation of problems as its predecessor and had removed the shift.»

  All of these units were reportedly USB 1.x, which should be usable on a USB 2.0 connector.

• What ports should I use to get the VPN RA worked?

  Hello

  I have a few tunnels l2l. I don't use "vpn sysopt connection permit" command. I prefer to activate the required ports for specific source IP. So they can establish the VPN tunnel with me.

  Recently, I have configured remote access vpn. It is work very well... But only when I activate "vpn sysopt connection permit.

  Question:

  1. what ports need to be activated to get RA VPN work? (without vpn sysopt connection permit)

  2. How can I restrict the access of remote when clients they connected to my private network?

  Thank you

  Leo

  Hi Leo,

  When you are not using 'connection sysopt... '. ", you must explicitly permit udp 500 and udp 4500, traffic esp on the outdoor access list.

  Let's say that public intf outside ip address is x.x.x.x and pool customer, we use y.y.y.0 and you want to allow 'only' traffic for port 80 through the tunnel.

  In the ACL on the outside, you need the following instructions:

  access-list 101 permit udp any host x.x.x.x eq 500

  access-list 101 permit udp any host x.x.x.x eq 4500

  access-list 101 permit esp any host x.x.x.x

  access-list 101 permit tcp y.y.y.0 255.255.255.0 eq 80

  access-list 101 deny ip 255.255.255.0 y.y.y.0

  * Please indicate the post if it helps.

  -Kanishka

• HP Pavilion P2-1140 does not have a way to connect to a Firewire port and USB transfer is not supported by Windows 7 to connect the Sony HC20 Handycam.

  Original title: Sony Hanycam HC20

  I just bought a HP Pavilion P2 - 1140 W7 64 bit and may not know how to download video from my Sony Handycam HC-20 who

  using a Firewire connection. P2-1140 does not have a way to connect to a Firewire port and USB transfer is not supported by Windows 7.

  I looked in the spec of my card mother HP and there is no additional slots to add adapters, no PCI, PCI-e or anything that looks like

  as if you can add anything. I know that the Firewire to USB converters cable do NOT work, any suggestions please

  There are USB firewire converters, but I think it will be a situation of hit or miss--they are unable to work or perform very well.

  The only option I can think of that would work would be to use AV out on the camera and a USB capture card that records on the computer.
  You can also consider going back to the computer and get a different model that is built in firewire support or at least an extension connector in order to get an expansion card.

• What ports needed to catalog and the business of Recovery Manager

  I have a server I have the Enterprise Manager configuration and recovery catalog on.  I have another server I want to manage.  The part of business manager seems to work very well, I was able to start the agent on this server and promote it.  But when I create the backup job and then try and tell him to use the catalogue of recovery I get a tns error, I think it's really a problem with my firewall.  I'm trying to find out what ports I need to open for the catalog recovery and Enterprise Manager to work.  That's what I have now.

  Ctlg Rec / EM Svr - all ports open-> Svr2

  Ctlg Rec / EM Svr < - just the port 4899 - Svr2

  4899 is the agent of the EM.

  Can I also open Svr2 1521 port to my Rec Ctlg / Server EM?  Or all other ports?

  2 server needs to connect to the catalogue of recovery via the TCP port that you define in the earpiece of your recovery catalog server.