W530 RAM Flex Mode?

Similar Questions

• W530 RAM questions

  Just got my W530. I ordered with 4 GB RAM installed factory and bought 2x8GB Corsair Vengeance separately. I installed the extra RAM in the slots for easy access on the bottom. The computer recognizes all 20 GB.

  I hesitate to pull on the keyboard to remove the RAM installed in the factory, if I do not. So, question #1, I pay a performance penalty in the current configuration? Memory access would be faster if I shot the 4 GB?

  Question #2, most everything I read online leads me to believe, there are two SO-DIMM slots under the keyboard, but the designs in the maintenance manual do appear there is only one slot there. Are there four SO-DIMM total locations in the W530? I ask because if I go to the trouble of pulling the keyboard to switch to the RAM, I'd be inclined to mix in an another 2x8GB, while I have it apart. I currently have no use for a lot of RAM, but it is so cheap right now, there is little reason don't not install it if I took the trouble to remove the keyboard.

  Carcozep wrote:

  One thing. You should be aware. Never put 1 or 3 bars of memory RAM. Yes, it's a good topic and a guide as to where to mount the RAM SO-DIMM so that you have two-channel should as lack of Dual Channel will be more successful than the frequency of the memory

  New Intel processors have a work around for this type of childcare channel in operation with 3 branches. It is not quite true dual-channel mode however because it uses a hack to achieve this. In any case, you only want to use the modules that are of the same brand/model of your machine. This ensures that they all the same exact specification. Running modules in a system often leads to blue screens that cannot be solved without removing some of the RAM.

• Is it possible to close the titles so they load in RAM until I tell them?

  I want to build my Orchestra until I play on the instruments. He ends by 165 securities loading from above all Kontakt 5.
  My problem starts a little after I loaded my project. My CPU bird up before I even play. That is not surprising that many tracks but can I somehow closed the tracks in my project? So my computer don't have to load anything until I have to say. I am aware of the Frost farm of, lock, mute buttons. But none of them really close the tracks. Somehow, I want to be able to force my project to open without loading all my instruments until I have actually say this to load a specific track: Pei

  Maybe I'm just dreaming? And the only solution would be a bigger computer: Pei as 12 hearts haha...

  Thanks in advance,
  Michael

  Hmmm, keep them loading...

  And neither of the two below answer to your problem?

  When Show Advanced Tools is selected in the Advanced preferences pane, you can freeze one track, reducing the computing power required to read the title. A reduced freezing track usage of the CPU than a track high-resolution audio without effects plug-ins, regardless of the number or complexity of plug-ins actually used on the track. Freezing is especially useful for software instrument tracks and audio tracks that use complex effects. Freezing is not available for software instruments several outputs.

  When you freeze a track, the track is rounded to an audio file. The gel file includes the output of any plug-ins on the track and any automation track. While the track is frozen, the gel file reads instead of the original track, which is temporarily disabled (including plug-ins). The channel strip controls (for example track mute and solo) are available, but no content track cannot be changed (including mute of the region and solo, for example).

  Even if a track is frozen, it cannot be changed. If you want to change the track, you can free an it, make the changes and then freeze again the track.

  Gel is designed to work around very CPU process, as software instruments with an architecture complex voice and complex plug-ins (such as reverb, filters or effects by FFT). If your computer allows to calculate all the active processes in real time, the titles of freezing is not necessary. Freeze tracks is recommended when the securities with processor software instrument or effects plug-ins are in a final State, or require no subsequent change.

  In freezing the slopes, you can:

  • Use plug-ins or additional software or audio effects software instruments instrument of additional tracks, which would be normally impossible it would exceed the limits of the CPU of your computer processing.
  • Read the projects created on computers with more CPU power.

  Freezing a track

  1. Click the Freeze button in the header of the track. The lock will turn blue to indicate that the track is ready to freeze.
  2. In the track Inspector, choose a Freeze mode:
     • Source only: Freeze the track without any signal effect plug-ins. When selected, the Freeze button becomes solid. Note: This Freeze mode is useful when you use software instruments much the processor or flex modes.
     • Pre Fader: Freezes the signal of the track including all effects plug-ins. When selected, the Freeze button shows a point.
  3. Click on the Play button in the control bar.
  4. To unlock the track, click the Freeze button again.

  To change the State of freezing of several tracks, click and hold the Freeze of a track button, then drag the pointer upwards or downwards. The buttons of the freezing of all tracks are critics put you in the same condition.

  If you try to make changes to a frozen track, a dialog box tells you that the track is frozen.

• Simultaneous use of flex pitch and the "timing" on the same region?

  Is it possible to edit a region in 10 with the two flex pitch logic and timing? When I toggle between modes, I get a message that informs me that pitch adjustments will be suspended. If I put the pitch of the notes to something way off - to check it out - it seems that as soon as I switch to flex pitch in calendar mode, pitch adjustments are ignored. Is it possible to have both at the same time? Workaround is bounce calendar settings in place then the correct pitch. Is this the best way? The only way? Any information would be appreciated. Thank you. -John

  IF you use flexible hours first then flex pitch your flexible hourly landmarks remain intact. In pitch flex mode you can select to the end of a note and drag to the right or left and upwards or downwards. So you can bend the pitch and flexible at the same time, but only when there is an event of note.

• Re: Satellite A300-145 with Vista 32 maximum RAM?

  Hi all!

  I have satellite A300-145 with Vista 32 home Premimume - now on laptop installed 2 modules of 1 GB of RAM (for mode dual channel)

  Q: if I replace the RAM to 2 modules of 2 GB of RAM this mode dual channel still & 4 GB RAM?
  -May support A300-145 4 GB RAM? and Vista 32? (Intel GM965 chipset have support 4GB RAM)

  Hello

  Satellite A300-145 was equipped with a Mobile Intel GL960 Express Chipset. Or I m wrong?
  AFAIK this chipset provides only the 2 GB support

  > If I replace the RAM to 2 modules of 2 GB of RAM this mode dual channel still & 4 GB RAM?
  32 bit Vista will recognize only about 3.2 GB.

• Cisco Ise 1.3 with Flex to connect wireless supported function

  Hello

  My environment is formed ROUND of flex-mode connection wireless and cisco Ise 1.3, these features are supported?
  Basic functions of the AAA
  profiling
  posturing
  Substitution VLAN
  Substitution of the ACL
  Comments commissioning

  TrustSec 2.0 this MDC is not supported? someone try this feature?

  These all work with ISE 1.3 and FlexConnect WLAN.

  You need the right license ISE - the type of mobility (wireless) license will cover everything. If you have wired and wireless, then you must have basic (for most features) + more (for profiling) + Apex (for Posturing).

• RAM standby does not properly

  I know the ram standby should be released once a program needs him, and he does, really, really slow

  Windows usually holds about 50% of my ram, as before, but when all my Active ram is used, it releases only 2 or 3 MB per second, which translates into new programs/processes that are running very slowly.
  For example, when all the active ram was used, I tried to extract a .rar file, which usually takes only a few seconds, and now it took about 5 minutes (350 MB file), while I still had 4 GB of ram in mode standby.
  Is there a way to get around this? The pace that he frees the ram, or even remove the standby work completely?

  Hi Sam,

  You can check the link that might help you understand what Standby memory is:

  Memory sizing Guide

  It will be useful.

• Crash when converting to the ASM of Flex

  I recently tried to convert Standard ASM ASM Flex with my two-node RAC Cluster using asmca. Conversion failed in the middle of the process, and now I am unable to recover from this failure. A node is in place and showclustermode asmcmd says "Flex mode.

  But no Proxy instance is running and I'm unable to set up the second body.

  Whenever I stop the clusterware on a single node the other node is able to start so it looks that they can't share some resources properly.

  Here is the result of crsctl res stat - you

  root@mccartney[+ASM1] # crsctl res stat - you

  --------------------------------------------------------------------------------

  Details of the name target a report server

  --------------------------------------------------------------------------------

  Local resources

  --------------------------------------------------------------------------------

  ORA. ASMNET1LSNR_ASM. LSNR

  INTERMEDIATE online mccartney not every endpoint Re

  resume, STABLE

  ORA. DATA.dg

  STABLE mccartney online

  ORA. FRA.dg

  STABLE mccartney online

  ORA. LISTENER.lsnr

  STABLE mccartney online

  ORA. OCR.dg

  STABLE mccartney online

  ORA.net1.Network

  STABLE mccartney online

  ORA.ons

  STABLE mccartney online

  ORA.proxy_advm

  ONLINE OFFLINE STABLE mccartney

  --------------------------------------------------------------------------------

  Cluster resources

  --------------------------------------------------------------------------------

  ORA. LISTENER_SCAN1. LSNR

  1 STABLE mccartney online

  ORA. LISTENER_SCAN2. LSNR

  1 STABLE mccartney online

  ORA. LISTENER_SCAN3. LSNR

  1 STABLE mccartney online

  ORA.asm

  2 LINE intermediate STABLE mccartney

  ORA.cpaul.db

  1 STABLE OFFLINE OFFLINE

  Instance offline in LINE 2 stop ST

  ABLE

  ORA. CVU

  1 STABLE mccartney online

  ORA. Lennon.VIP

  1 LINE intermediate mccartney has NOT MORE, STABLE

  ORA. McCartney.VIP

  1 STABLE mccartney online

  ORA. OC4J

  1 STABLE OFFLINE OFFLINE

  ORA.paul11.db

  1 instance offline off LINE Shutdown, ST

  ABLE

  ORA.scan1.VIP

  1 STABLE mccartney online

  ORA.scan2.VIP

  1 STABLE mccartney online

  ORA.scan3.VIP

  1 STABLE mccartney online

  
  

  I solved the problem: as easy as it might be: deleted files listener.ora on both servers because it looks like there was some Sales entries. After the cluster is restarted everything works fine now.

• MenuBar Flex 4 Styles

  Hello

  I need to use a menu bar in a flex project 4.

  I noticed that I have to use the Halo theme for the component style (fillColors, borderColor etc...).

  In my case using the Halo theme for compatibility 3 application or flex mode is not an option.

  How do I get around that?

  All plans to have a version of the spark of the menu bar any time soon?

  Thanks in advance.

  Certainly, some styles (for example, fillColors) are not supported directly in the theme of the spark, but you could probably create a custom look that supports a background gradient fill.

  Peter

• Flex limit

  Hi all
  
  I would like to learn more about flex, borders and select parent frame.
  Any help that explain or Documents!
  
  Thank you
  
  NY

  Limited fashion
  On: the child objects cannot be moved outside of their parent objects encompassing.
  OFF: the child objects can be moved outside of their parent objects encompassing

  Flex mode
  On: borders of parent "stretch" when the child objects are moved against them
  OFF: Borders of Parent to remain fixed when the child objects are moved against

• 2 different values of total physical memory HPremium Vista64

  Hello

  Problem solved. TomsHardware forum - Vista 64 8 GB DDR2 only 3 GB display.
  I got into MSCONFIG in start - MAX RAM 3 GB controlled Advanced Settings tab.
  No idea why, but he was there and I wasn't aware of these parameters there.
  After reboot and uncheck option MAX RAM OS shows 6 GB even in task managers.

  I have problem with 2 different values reported total available physical memory.

  I run Vista64 Home Premium SP2 on card mother Gigabyte GA-G33M-S2L.
  MB has 4 memory slots 0-3 for the chips PC6400 DIMM, MB spec said on the stand upwards to 8 GB of system memory.
  According to HWinfo32 these niches have memory banks 0/1 2/3 4/5 and 6/7.

  I added 2 * 2 GB Kingston chips pairs in slots 0 and 2 (same color slot).
  and put the original 2 GB Apacer single-chip for slot 1 (color different connector)
  (AFAIK DIMM should be matched 0 + 2, 1 + 3, correct me if I'm wrong...)

  BIOS said running in the (expected) Flex mode, when a part of the memory is double-channneled, and part is not.
  There is no setting in BIOS potential question of 4 GB, or suspicious parameters posibly do.
  (You can consult the manual of MB linl below)
  I have the seller last MB drivers installed
  Claims of the seller MB supports 8 GB memory system.
  MB on Microsoft pages listed among the Wista32/64 bit certified MBs.

  Now:
  BIOS page pasic said 6144 MB of installed memory.
  The BIOS POST test reports 6 GB of memory.
  Windows Control Panel reports 6 GB system information.
  Utility CPU - Z shows 6 GB 2 GB for all chips.
  HWiNFO32 utility reports 6 GB.
  MEMTEST32 boot CD, initially used for testing memory, says 6 GB.
  Live CD of Mandriva Linux 2010.0 says 3 x with installed/activated 2048/2048 MB memory cards

  But why Windows task manager and Process Explorer (latest version 14.01)
  ask there total 3 GB?

  Problem solved. TomsHardware forum - Vista 64 8 GB DDR2 only 3 GB display.

  I got into MSCONFIG in start - MAX RAM 3 GB controlled Advanced Settings tab.
  I have no idea why, ig, it was default settings or if I played with it in very deep past.
  After unchecking and restarted the process Explorer shows 6 GB.

• Upgrade memory - starts to beep

  Hi, I tried to improve my 4 GB to 6 GB RAM

  Right now, I'm running Elpida 2x2gb ram, single mode.

  Cannot operate with dual channel:

  And now, I tried to use 2 x 1 GB Kingston ram

  Ram elpida and are all two kingston 1333 mhz.

  But I can't seem to run in dual channel mode:

  Can someone please help me out here.

  I use the card mother IPISB-CH2.

  -TaGGii

  Please identify your desktop PC with the product name and product number.

  If you are upgrading and want to upgrade to work right the first time:

  1) must be replaced only memory by pairs of compatible memory modules guarantee of well known manufacturers.

  (2) find the compatible memory by online research with the full product name of your desktop + upgrade memory as keywords in the search.

  (4) do not use the memory of the peculiarities of the mtherboard specifications to match with the memory modules that are sold by a seller. Using this method of roll of the dice is a financial risk. Certainly, it increases the chances of a PC, even not by the way of the POST (power on self test) the BIOS during the startup process of the PC. He does not profit from the sale by the manufacturer argument... Guaranteed compatibility.

• W500 Intel wifi Link 5300 AGN - No N?

  I have a W500 with Win 7 x 64. I have the Intel wifi link 5300 AGN wireless card and drivers Intel, 14.3.2.1

  In devices, Advanced tab, Manager it shows these settings for 802.11n properties. But at the bottom of the list, the wireless Mode, it shows 802.11a/b/g. There is no mode N. Is that this card capable of the speeds Wireless N? Thank you for your help.

  "N" is not a specific mode that you set on the wireless card, options must be various mixtures of A, B and G listed.

  802. 11b and 802.11 G are both in the 2.4 Ghz range, where everything and his brother uses including microwave ovens, cordless phones, etc. It is therefore very noisy, but common. 802.11 G is the version high speed 802. 11B; If anything the frequency wireless 'channel' only supports 802. 11B, everything about this channel is limited to the 802. 11B.

  A is in the range 5.0 Ghz and 802. 11A is the * ONLY * thing; It is also a much less common standard, you need wireless routers that support, etc. If you can use it, do.

  802.11n is actually one 'upgrade' to others, allowing the channel bonding multiple and very wide channels, which increase a LOT of bandwidth.

  But for example on both my T61p and W530 my "Wireless Mode" options are: a, b, g, b/g, a / g, a/b/g. I have another '802.11n Mode' option to enabled/disabled in the tab advanced on my wireless card.

• Best material for max in FSX settings

  Hello

  I have a question about FSX. After a search through many websites and articles, I decided that the best thing would be to ask here.

  I have Microsoft FSX and I need to buy a laptop on which I'm going to run it.

  But I read it is what we call the FPS which makes the game more realistic. And who should be set at 30-40.

  I understand that I need at least a processor i5 and about 6 GB of RAM, but what I paint a full stop is the graphics card.

  As a flight simmer, I will install various other addons as GSX, FlyTampa Dubai, PMDG, among many others, and I want that they run with full settings and no slagging. I also want the FPS to be quite high. What should I expect?

  PS: It can be for anything, Deluxe, acceleration or steam

  "FPS which makes the game more realistic."

  FPS = frames per second. There is no more realistic games as such. A low fps makes games

  less smooth and a very low fps will show that of latency, both in the game and mouse movement.

  More IPS also helps reduce blur during panning, especially if more than 60 fps (when a monitor with)

  allows also a refresh rate of 120 Hz)

  30 images/s would be the minimum desirable frame rate, but some people are not happy with a less than 60 frames per second rate.

  The game in question also of factors in which is the lowest rate of desirable framework. Some games smooth

  at 30-40 fps than others, but here again, different people have a different perception.

  I'm usually satisfied a little around 45 + fps, but not too fussed if it comes down to 35fps in time.

  Depending on the game.

  '6 GB of RAM'

  Computer laptop mfg tend to throw in bad RAM configurations. They do this to make the machine card to look better,

  but it is best to keep the RAM balanced, so if using four sticks, you would have to do with 6 GB

  = 2x2gb + 2x1GB, it would be preferable to have 4X2GB.

  Or even worse - three sticks of 2 GB. Three sticks will be run in single channel mode less effective RAM

  mode dual channel vs. To run in mode dual channel the machine needs of 2 or 4 strips of RAM.

  Using two sticks of 2 x 4 GB is better than using four, because it puts less stress on the memory controller.

  -That said, FSX can accommodate 4 GB total?

  -I've never used a modern Flight Simulator (CFS2 & IL2), but I understand that flight sims are somewhat related to the CPU.

  That is to say that they rely heavily on the cpu for calculations of realistic flight, then yes that an i5 would be better

  What an i3. An i7 wouldn't it be better if the Flight Simulator is able to use Hyper-Threading technology.

  -However, if you use landscapes of high resolution and other addons/mods you need also a high range gpu.

  Computer laptop gpu are lower-clocked vs their equivalent office (a M at the end of same model number)

  help keep the power consumption and temp down (laptops are known for overheating when playing games or the sims)

  with system high requirements for long periods of time, that is to say-more than an hour).

  That's why you need a computer laptop gpu a bit higher than what you would use for the same level of

  eye candy "graphics" and the realism that a person using a desktop computer that PC would get if you rely on the connection

  a 24 "monitor.

  This isn't a recent game, but because of the addons specs could be somewhat higher when released.

  various website forums flight sim would be the best place to find out exactly what this game demands when using addons you mention.

  -You can also compare the options of AMD and Nvidia by reading reviews of their current model laptop gpu.

  While the critics are not likely to include a Flight Simulator in the benchmarks game, you should always be able

  extrapolating from the games they reference when comparing the specifications of the "recommended" system

  for these games with the requirements of FSX (after factoring in the potential stress of addons 'modern').

  The Nvidia GTX 970 m is the current model under high-end Nvidia GPUs (GTX 980 m).

  You may still be able to get by with a GTX 960 m, or even a GTX 950 m, but I'm going to start you with the

  review of the GTX 970 m (just to tease you: D).

  notebookcheck.NET/NVIDIA-GeForce-GTX - 970 M

  If you don't have already been here - http://www.flightsim.com/vbfs/content.php

  .

• AIR-AP1852E no flexconnect

  I have configured 10 AIR-AP1852E on a WLC2504 with Version 8.1.131.0 of the software, but I can't configure these ap Flexconnect mode.

  Cisco documentation by the available modes are 'Centralized Local', 'Stand-alone', 'Sniffer', 'Cisco FlexConnect', 'Monitor', 'OfficeExtent' and 'Mesh' but in the configuration, I have only "the" local mode and the "Sniffer."

  Anyone know why?

  For the release notes for Cisco, there is an article on what is not supported for the 1830s and 1850s, and Flex is not supported.  Here is the link and the link is an excerpt from what is not supported.

  http://www.Cisco.com/c/en/us/TD/docs/wireless/controller/release/notes/c...

  Features not supported on access points-Cisco Aironet 1830 and 1850
  Cisco's virtual wireless controller
  Mesh mode
  Flex mode
  Monitor mode
  Sniffer mode
  Workgroup (JWG) Bridge mode
  OfficeExtend mode
  Improved Local (ELM) mode
  WHEAT integrated
  Basic spectral analysis
  Support for Bluetooth Low Energy (WHEAT) devices on USB
  Cisco CleanAir
  ClientLink wireless Cisco 3.0
  Discovery of rogue location Protocol (RLDP)
  Compatible eXtensions (CCX) Cisco specification
  802.1 "supplicant" x for the AP on the wired port authentication
  Static WEP key for TKIP and CKIP
  Dynamic pass control of feeding (DTPC)
  Federal Information Processing Standard (FIPS) and common criteria
  Detection of Rogue 40 MHz
  Native IPv6
  Telnet

  -Scott

  Please evaluate the useful messages *.