W550s touch screen comes with a protective film?

Similar Questions

• Recovery USB key comes with write protection error when starting at the beginning of recovery

  I just got my key USB recovery flash in the mail from HP.  I have an ENVY 15 t-j100 Quad and I had accidentally wiped the OS off the coast of the SSHD.  I go into the BIOS, change the boot order, even tried disabling and enabling legacy mode secure boot and I get the same error once I have tell the laptop to boot with the USB key.  He comes up with an error cscript.exe and says that it is impossible to write in the C: disk because it is write protected.  I can cancel, try again or continue, but the laptop stops just after these buttons.

  Any help would be appreciated.  Thank you.

  Ryan

  I had set up the SSHD acceleration and 24 GB cache in a RAID0 configuration, as if it was before I wiped the OS.  Apparently, which caused the error, because recovery what USB works fine once I reset both drives non-RAID configurations.  I'll be able to put back them in a RAID0 once the OS is installed?

• Touch screen broken with Windows 8.1 update

  Hello, I tried to update Acer laptop inspire my MOM to 8.1 of Windows for some time now without success. The problem is, she has cracked the touchscreen, and this translates into presses randomly on the screen, prevents me from doing anything. This problem is normally non-existent since I disabled the device in Device Manager in Windows 8. However, when you perform an update for Windows 8.1, the device is reactivated and I can't go through the installer due to the incessant screen button. Is it possible to do the update with the disabled drivers, short to dissociate the laptop (that I can eventually do) or a new installation? If I knew where were the exact drivers for it, I couldn't remove them with a live cd.

  Hello Keane,

  I suggest you to contact Acer on it and get the screen replaced and then proceed to the Windows 8.1 update.

  Support

  http://us.Acer.com/AC/en/us/content/support

• HP Paviliion cursor disappears after using the touch screen or with Google Chrome.

  Separated from this thread.

  I have the same laptop and I'm having the same problem. Especially with Google Chrome.

  I tried your fix, and again, I noticed that the pointer does not yet exist when I use Google Chrome. Help, please!

  Hello

  Thanks for posting your query on the Microsoft Community.

  It seems to be a problem with the driver compatibility problems. I suggest you try to install the drivers for the touchpad in compatibility mode and check if it works for you.

  Have you tried the steps in the previous thread by Rizwan?

  Method 1:

  Step 1: Download the drivers for the touchpad of HP the following link.

  http://WWW8.HP.com/in/en/support-search.HTML?tab=1#/qryterm=Ultrabook%20X2%7C%7C&SearchType=s-002

  Step 2: Install the driver in compatibility mode.

  Follow the steps to install in compatibility mode:

  a. do the driver installation file right click and select properties and then tap or click on the Compatibility tab.

  b. check the run this program in compatibility mode for: box.

  c. press or click the menu drop down and select a previous operating system, and then tap or click OK.

  d. try to install the driver and verify.

  Method 2:
  If there is a problem with the Google Chrome browser settings.

  I suggest you uninstall and reinstall Google Chrome browser and check.

  To uninstall, you can see the following link.
  Uninstall, change or repair a program

  http://Windows.Microsoft.com/en-us/Windows/uninstall-change-program#uninstall-change-program=Windows-7

  After uninstalling Google Chrome, try reinstalling Google Chrome.

  Hope this information is helpful and let me know if you need additional assistance.

  Thank you.

• WINDOWS SCREEN COMES UP WITH THE BARS MOVING ON THE SCREEN BUT WILL GO NO FURTHER LOADING.

  THE WINDOWS SCREEN COMES WITH THE BARS MOVING ON THE SCREEN BUT WILL NOT GO FURTHER.

  Hello

  its possible your video drivers of meetings required.

  Info

  http://www.ehow.com/how_4921037_update-display-drivers-Windows-XP.html

• Touch screen on the iPhone issues 5 after SW upgrade 9.3.2

  Hello

  I have an iPhone 5 that I bought just two years ago. The phone worked perfectly despite the fully loaded with applications, images and music. About two weeks ago, I upgraded the software to 9.3.2. Just after that, the touch screen started to work intermittently. When I managed to unlock, it will take seconds of use of the phone before that the touch screen no longer works again. I have to press the button several times until the touch screen comes back to life (only for a short period of time). It's totally unbearable. I can't yet answer phone
  calls.

  I contacted the technical support and all they got me to trying: restart the phone, restore it via iTunes for a backup, give it a new phone... and the problem is always the same. I've updated then 9.3.3 and same thing. I was informed by the technical support that this could be due to a problem with my hardware only made visible by a heavier operating system. Well, it's just not possible. It is not possible that my phone with applications 0 is unable to deal just with the operating system while running smoothly with the phone completely full before the upgrade.

  Someone faced the same question? If so, did you solve it? Thank you

  He Jeinser,

  Thanks for checking out the communities Support from Apple! I understand that you are having problems with the response of the touch screen on your iPhone. I can understand who want to ensure that you are able to use your iPhone, the way that you expect.

  You have already completed all the steps that I would normally recommend to solve a problem with your touchscreen, including restoring the iPhone and set up as a new device. From the information provided, it seems that your iPhone needs to be repaired. The following link should help you get started with the process and has links with additional information on topics such as the warranty and pricing of the service, replacing the battery and express alternative service.

  Repair - iPhone official Apple Support

  See you soon!

• Where can I get (outer shell) laptop protection films?

  Sorry, I'm not used to participate in the forums.

  I have a question may seem silly to many people.
  My Lap top Satellite U400, was delivered with a protective film on the outside of the cover/screen.
  I never took it away because the underlying surface of the cover seems to be very scratch.
  After many years of good service, I need to replace the film with a new.

  Anyone know if these movies are provided by Toshiba, or can suggest me a web provider of external protection films address the top of Tower (no screen)
  Thanks for the response;
  NB I live in Italy

  This film you have now is fixed on each new laptop and will be in the finalisation of the product to protect the new product. As I know these films of identical protection not available as part of the Toshiba options and accessories so online, you need to check if a similar product is available on the market.

  Visit the nearest computer shop and ask them if they have something similar.

• I have a Toshiba satellite click W35Dt A3300 is a touch screen and I want to know if windows 7 comes with touch screen pack

  * Original title: need info

  I have a Toshiba satellite click W35Dt A3300 is a scree touching one I want to know if windows 7 comes with the pack touch screen or I have to download a package of contact after that I have download windows 7

  Do you mean this - http://windows.microsoft.com/en-us/windows7/whats-the-microsoft-touch-pack-for-windows-7

  If Yes, - "Touch Pack comes preinstalled on some multitouch in Windows 7 PC, but it is not included in Windows 7. The Touch Pack is available for download from the Microsoft Download Center. »

• BlackBerry screen protection film Smartphones... help

  I was concerned that, after a short period, I started to see the marks on my screen. Bought a screen protector but before I put it, I wanted to clean up what looked like something on the screen in the corner. Turns out there is a film already on the screen to protect it, but mine had lifted a little bit in the corner. I screwed up trying to smooth down, it further. In any case, I guess I need a replacement for this film. How can I get a?

  The plastic film, it comes with is just for packaging... it not intended for daily use because this film is not strong... I removed it and bought the protectors of Verizon n you can tell the difference of these two movies... Verizon protectors are more n more difficult less fragile... so I highly recommend the verizon those... his 3pack n just a cloth Cleanin... mind basically I'm agree wit jtaylor

• X 1 C touch: screen - plastic protective sheet there are affixed?

  It's great, no problems with the touchscreen like some people not reported.

  However... it seems that the screen has a protective plastic sheet there are affixed.  It is especially noticeable around of the MIC and cam, where the holes appear to exist.  But here's the thing: I can find no documentation saying that this should be removed, and it is not easy to raise the sheet corners (in fact, I have had zero chance, but have not tried much because I don't want to damage anything).

  So here's the question: do I keep trying to raise the sheet or assume that it is part of the design?  The sheet still exist?

  Happy to answer questions on the laptop (model i7 / 8GB, with the Intel 240 GB disk).

  Only trouble is that the sales guy who helped with the wrong adapter slim added order to order.

  Thank you!

  Dan

  Note from Moderator: Edition subject to the content of the game.

  dhackett,

  Thanks for the photos and the excellent question.  I agree with you that others can ask this too...

  I borrowed a X 1 carbon touch from another employee and don't see what you're talking about - it seems to be a protective film on the LCD that goes to the edge of the screen except for about the width of a staple.  You can see the circular cut outs for the camera and 2 microphones.

  This should not be peeled off.

  The official position of Lenovo, it's that this should not be removed.

  Mark

• Apple Watch with broken touch screen

  Hello, community.

  I bought my 42 mm watch with stainless steel on January 4, 2016. And a few weeks ago I damaged it accidentally. Him came bracelet cancelled and the watch fell to the ground. Thus, the glass is broken. Touch screen works, but the broken glass is too high and can damage the fingers.
  On 7 September, Apple announced a new series of Apple Watch 2.

  Is it now possible to give them my watch, pay with a discount and make a NEW APPLE WATCH Apple Watch 2 series, or new sport? without a bracelet, that a case is necessary.

  Hello

  Apple does not currently offer a program of recovery for Apple Watch, whether in work or damaged condition.

  For compensation for your damaged watch, contact the Apple Support (mail service may be available) or make a booking Genius Bar to establish your available service options, the likely time and cost:

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/retail/Geniusbar/

  Prices for the United States information service, for example, are available here:

  • https://support.Apple.com/watch/repair/service/pricing

• Firefox works with the touch screen technology windows 8?

  Plan to buy all-in-one touch screen pc and want to know if Firefox browser works well with this technology.

  Yes it is on the right. as the article linked in my response earlier said that the touch interface is currently available in early development builds, which are mainly for the developers and users very advanced and not recommended for daily use. Firefox 26 will come on the aurora in mid channel one to beat late October - these build would give you the opportunity to test and to discover the new format in a more stable form (provided that the calendar holds).

  https://www.Mozilla.org/Firefox/channel/

• First HP Calculator graphic: touch screen not responding do not on first HP Calculator after the upgrade with Conectivity Kit to the last v

  Touch screen not responding is not after the upgrade to the latest version of the software worm with connetivity Kit on my PC.

  the Cal turns on and all buttons work, but I can't get the screen to answer. I have reset the Cal and reinstalled the software with the connectivity Kit, but the screen doesn't always react do not... Help

  Bob

  Hi!, @bigbob50:

  If your FIRST HP, have the warranty available, you can call, support Centre and the support oh HP, closer, your home of... http://h30434.www3.HP.com/T5/Android/phone-assistance-in-the-world/TD-p/5038024

• Touch screen stopd woring with win8.1

  Touch screen stopd woring with after upgrade to win8.1

  My laptop is brand new S/N [thank you for visiting the Forums from HP Support. I'm sorry to inform you that your message needs some changes to remove personal information].
  Model 15-n02eo

  How to solve it?

  Hey hsto;

  Thanks for the updated info!

  You can also try the HP Support Assistant: HP Pavilion TouchSmart 15-n029eo PC laptop support - HP Support Assistant. It can detect missing drivers and outdated software which may help.

  You can find information on how to use it and he can do here: HP Support Assistant.

  Let me know if the documents here and in my previous post help, solve the problem.

  HP Pavilion TouchSmart 15-n029eo Notebook PC supportLet me know if the documents that I posted here and in my previous post fixes the problem. http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-123086-1&cc=us&DLC=en&LC=en&OS=4158&product=6608667&sw_lang=HP Support Assistant

• When I click on any shortcut, it comes up with the screen 'open with '.

  I had to restore my system to an earlier date and after I did I wasn't able to use the system shortcuts to do anything.  Once I got online, don't know exactly how it happened, I copied a URL and put it in a document, so I could use it to get online.  None of my shortcuts work.  I tried to use the restore of the system again, but it comes with the same screen that happens with everything - word, excel, - everything what is new.  If I want to open a new word document, I open an old and then create a new one.  This is what happens when I click on the shortcuts.  Also, my security program is not able to work because he has access to the internet and it may not.

  Choose the program you want to use to open this file:
  File: iexplore.exe
  Recommended programs
  Explorer Internet Kodak Printer Installer Web Installer
  Microsoft Corp. Eastman Kodak Company
  Microsoft Security Client configuration Microsoft Silverlight Out of Browser
  Pitcher of Microsoft Corporation
  Microsoft Corporation
  Other programs
  
  
  
  
  Browse...
  
  
  If the program you want is not in the list or on your computer, you look for the appropriate program on the web.
  
  
  
  
  OK Cancel
  
  
  Help, please!

  Hello

  I suggest you to follow the steps from the link below and check if it helps:

  Method 1: Try to run fix it from the link below:

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  Method 2: Change default programs using Set Program Access and computer defaults:
  http://Windows.Microsoft.com/en-us/Windows7/change-default-programs-using-set-program-access-and-computer-defaults

  Method 3: Also, try to set the program access security program Internet explorer by default:
  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  .

  Method 4: Try to follow the steps of below the link, which would help us to open another program it.

  http://support.Microsoft.com/kb/950505

  However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, proceed as in the KB Article:

  http://support.Microsoft.com/kb/322756/

  Hope this information is useful.