W700 install missing drivers after own W10 (deleted partition)

Similar Questions

• Missing drivers after new OS installed.

  Hello, my nameis Tyler.

  So my old hard drive in my Toshiba Satellite C675 decided to die on me. I bought a new hard drive and a new windows 7 Home premium OS to new hard drive empty. After installing the operating system on the new drive hard it wouldn't let me updat because I'm not connecetd to the internet.  Trying to connect to my network, I get the messgae of error 'install a driver for your network adapter' so I click Next and the following error that says "windows can't find a driver for your network adapter" so in short I can't install the drivers becausi can not get my computer connected to the internet. I can't get my computer connected to the internet, because I need to install the drivers. Any help would be greatly appreciated.

  I tried calling the support number microsoft product, but the guy gave me the run around trying to sell me a CD pack for $ 200, and then to buy a service that would supposedly help me with my problem. He wouldn't even give me his name.

  Also, you will need to click 'Start' , 'system' type, click System in the list. In the left pane, click on "advanced system settings" , click the "Advanced" tab in the performance box, click settings, click on the 'Visual effects' tab make sure that the boxes "Enable aero peek" and "enable transparent glass" are checked.

• Tecra A3 (PTA30E) - some missing drivers after reinstalling XP

  Hello

  Ive had my tecra A3 PTA30-E for some time now and the built-in wireless has always worked.

  Last month, I got a fatal error on my XP SP3 (damaged or missing ntoskrnl.exe) and wouldn't boot, I finally followed the fault to a sector corrupted on my HARD drive. After a complete format and reinstallation of XP SP3, I have my laptop in service again but less my wireless and my wired network adapters and a couple of other devices. I used the pilot site to download all my drivers and BIOS update toshiba and installed it all. Ive got most of the work including my ethernet devices so that I could connect to the net via a cable.

  Then I wanted to install the drivers on the wireless but when I look in device manager theres no wireless option and its not in "network adapters" either. The switch at the front of the laptop for the wireless is on and the light is lite and fn + f8 does nothing

  I even tried the Toshiba diagnostic tool and comes as all the drivers and cannot do not regiester built theres in wireless is

  I have still 4 devices that were not installed ("other devices"? ") and they are"
  ? multimedia audio controller
  ? network controller
  ? video controller
  ? video controller (vga compatible)

  I tried to download all possible wireless LAN drivers and place them in a folder and then said he's looking for the driver for the '? network controller "in this folder, but it is not installed as no driver found."

  Is it '? network controller "my case, nothing to do with the wireless or wireless card?"

  Suggestions welcome as I exhausted on this one

  Thank you very much

  Nick

  Toshiba Tecra A3 - XP SP3... Toshiba Tecra A2 - LinuxPuppy

  Hello

  First network controller can mean both LAN or WLAN card. If you check the vendor and device ID in Device Manager, you identify which device it is exactly. So please check the Web from Toshiba site for drivers:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  As far as I know multimedia audio controller means that the audio driver and the display driver video controller.

  But just one question: why you n t use the Toshiba Recovery disk? There are all the pre-installed drivers.

• Missing drivers after downgrading to Windows 7

  Can someone help me?

  Miss me the drivers after downgrading to windows 7 (from 8.1).

  The drivers I need is:

  -Bluetooth controller

  -Ethernet controller

  -Network controller

  PCI device-

  SM Bus controller-

  -Controller universal Serial Bus (USB)

  My HP 15-g030s0 notebookis

  I would be very grateful for help.

  Best regards / by

  First, install the amd chipset driver and reboot:
  
  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

  Audio: Accept the agreement, download and install the driver for the second on the list. "
  
  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownT...
  
  Ethernet: Download and install the 3rd driver on the list.
  
  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTy...
  
  USB 3.0: Install both.
  
  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417&SP...
  
  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417&SP...

  Media of Realtek PCIe Card Reader Driver:

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359407&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_125075_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Don't know what wireless card you have since HP use various brands. If these do not work, you will need to get the hardware id to the device in Device Manager.

  IF you have Atheros QCA9000 Wireless Qualcomm:

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359407&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_128686_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Atheros Bluetooth:

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359407&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_125590_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• HP pavilion dv7-6111eo: various missing drivers after having reinstalled Win7 64 bit on hp pavilion dv7-6111eo

  Aloha

  First of all... I'm not grumpy, geek or nerd... And I want to say these words to those who are at best.

  In this case, you need to see me as a kid in kindergarten, being taken by the hand and what to do, down on every detail. Sad but true.

  Without me know why, I've known several DLL files missing, and often obtained on those error messages.

  A pain in the neck, so I re-installed Windows 7 64 bit, because I didn't want to mess with these missing dll.

  After this relocation, I couldn't have the internet connection to my router. Fortunately, I have a fixed 10 year and longer, where I eventually found the driver I needed, so it works now.

  But now it seems that there are several other drivers missing or not installed.

  I got a little info, another post, it must provide information and hope that will be enough. If this isn't the case, then please let me know additional information which may be required, and where I can find those on my PC, so I can provide these.

  Missing drivers:

  Network controller;

  Hardware ID: PCI VEN_8086 & DEV_008B & SUBSYS_53158086 & REV_34

  SM Bus controller.

  Hardware ID: PCI VEN_8086 & DEV_1C22 & SUBSYS_1659103C & REV_05

  (USB) Universal Serial Bus controller.

  Hardware ID: PCI\VEN_1033 & DEV_0194 & SUBSYS_1659103C & REV_04

  I have 4 USB ports, but only work, others do not react, and I need all four at the same time. In addition, I would like to have everything in order after I had to reinstall Win 7.

  Thank you in advance for any help I can get. Just have in mind that I need the things dug into the paper.

  Hello:

  You need these drivers...

  SM Bus controller.  Install this first and then restart.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102010-2&cc=us&DLC=en&LC=en&OS=4063&product=5154607&sw_lang=

  Network controller;

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99014-2&cc=us&DLC=en&LC=en&OS=4063&product=5154607&sw_lang=

  (USB) Universal Serial Bus controller.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100294-2&cc=us&DLC=en&LC=en&OS=4063&product=5154607&sw_lang=

  You will also need this bluetooth driver.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99500-2&cc=us&DLC=en&LC=en&OS=4063&product=5154607&sw_lang=

• Fresh windows install missing drivers

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=&sw_lang=&product=517779...

  ^ This is my product with its pilots.

  I managed to install a few of them:

  Driver Audio of IDT high definition (HD)

  Intel HD Graphics driver

  Synaptics Touchpad Driver

  Validity fingerprint sensor driver

  Broadcom wireless LAN

  Realtek LAN Local Area Network

  But when I go to Device Manager I get still lack drivers:

  

  I'm not sure of what those who are... I tried to analyze it now on the site of HP to leave HP to scan my system for out-date and missing drivers, but after that I installed the extension for Chrome, nothing happens when I hit Scan... It's as if the button has no effect.

  If anyone knows what drivers it is I need to DL?

  My research indicates that it is the Renesas Electronics USB 3.0 driver that is necessary.

  Please send Bravo

• missing drivers after new installation of w7 Ultimate 64 bit on HP Pavilion

  The title says:

  "pilots missing after the new installation of w7 Ultimate 64 bit on HP Pavilion.

  It is a Pavilion dv6 1341eo.

  The missing drivers from, said hwat Device Manager is:

  Base system device

   

  " Bus PCI 6, device 0, function 1 "

  Hardware ID:

  PCI\VEN_197B & DEV_2382 & SUBSYS_3628103C & REV_00
  PCI\VEN_197B & DEV_2382 & SUBSYS_3628103C
  PCI\VEN_197B & DEV_2382 & CC_088000
  PCI\VEN_197B & DEV_2382 & CC_0880

   

  Peripheral basic system (2)

   

  " Bus PCI 6, device 0, function 3 "

  Hardware ID:

  PCI\VEN_197B & DEV_2383 & SUBSYS_3628103C & REV_00
  PCI\VEN_197B & DEV_2383 & SUBSYS_3628103C
  PCI\VEN_197B & DEV_2383 & CC_088000
  PCI\VEN_197B & DEV_2383 & CC_0880

   

  Peripheral basic system (3)

   

  " Bus PCI 6, device 0, function 4 "

  Hardware ID:

  PCI\VEN_197B & DEV_2384 & SUBSYS_3628103C & REV_00
  PCI\VEN_197B & DEV_2384 & SUBSYS_3628103C
  PCI\VEN_197B & DEV_2384 & CC_088000
  PCI\VEN_197B & DEV_2384 & CC_0880

   

  Unknown device

   

  ' on Intel (r) "ICH9M LPC-interfacecontroller - 2919".

  Hardware ID:

  ACPI\ENE0100
  * ENE0100

   

   

   

  Anyone please... Here is the driver for these devices?

   

   

   

  Hello:

  The first group of ID you posted with 197B is the JMicron card reader.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-75661-1&CC=US&DLC=en&LC=en&os=4063&Product=4049954&sw_lang=

  The other is the ENE CIR receiver that needs a driver.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-75664-1&CC=US&DLC=en&LC=en&os=4063&Product=4049954&sw_lang=

  Paul

• Missing drivers after recovery

  Dear HP,

  I just had the unfortunate experience of having to re - install Windows 7, but not through the recovery option, because it did not work.

  It seems my PC works with the exception of some drivers, including ethernet drivers. Without internet, it is very difficult to get the updates and other drivers. I am currently working for my wife's PC in the hope of resolving the problem quickly.

  Data sheet:

  HP Pavilion - Windows 7

  Missing drivers

  Ethernet controller
  Hardware ID
  PCI\VEN_10EC & DEV_8168 & SUBSYS_2ABF103C & REV_06
  PCI\VEN_10EC & DEV_8168 & SUBSYS_2ABF103C
  PCI\VEN_10EC & DEV_8168 & CC_020000
  PCI\VEN_10EC & DEV_8168 & CC_0200

  PCI Simple Communications controller
  Hardware ID
  PCI\VEN_8086 & DEV_1C3A & SUBSYS_2ABF103C & REV_04
  PCI\VEN_8086 & DEV_1C3A & SUBSYS_2ABF103C
  PCI\VEN_8086 & DEV_1C3A & CC_078000
  PCI\VEN_8086 & DEV_1C3A & CC_0780

  SMBus Controller
  Hardware ID
  PCI\VEN_8086 & DEV_1C22 & SUBSYS_2ABF103C & REV_05
  PCI\VEN_8086 & DEV_1C22 & SUBSYS_2ABF103C
  PCI\VEN_8086 & DEV_1C22 & CC_0C0500
  PCI\VEN_8086 & DEV_1C22 & CC_0C05

  Many thanks in advance,

  Rob

  You can find your driver page using the link at the top of this page entitled "Support and drivers". Enter your PC model number to find the correct page.

• Looking for missing drivers after downgrading

  I got a new HP Envy 700 - 030qe CTO of Windows 8 for Windows 7.

  First question: is there a place I can get ALL the compatible drivers for this machine on Win7?  I'm sure that HP sold this machine exactly (or almost exact) a few months ago with Win 7 on it?  If someone can tell me the model number then I could order the recovery for her disc, hopefully.  I have a legal copy of Win7 with license key, all I need is the drive to recover to Win7.  Even if this is not correct, it would be closer to that you are looking for a bunch of missing drivers one by one.

  Second question:

  I could find most of the drivers except something that presents itself as a USB controller (although most of the USB ports seems to work, maybe all of them).  Any idea what to try for this HP drivers:

  CONTROLLER USB - Hardware ID

  PCI\VEN_8086 & DEV_8C31 & SUBSYS_2AF3103C & REV_04

  PCI\VEN_8086 & DEV_8C31 & SUBSYS_2AF3103C

  PCI\VEN_8086 & DEV_8C31 & CC_0C0330

  PCI\VEN_8086 & DEV_8C31 & CC_0C03

  Pointers are greatly appreciated!

  Thank you.

  Hello:

  You need the USB driver.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=3467&DwnldID=22824&keyword=Intel+USB+3.0+Extensible+host+controller+driver&lang=eng

  There are no models with the motherboard in your PC with W7 drivers.

  Even if there were, the recovery of one of these models discs would not work on yours.

  W7 drivers you need:

  First install the chipset driver and restart.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=816&DwnldID=20775&keyword=chipset+installation&lang=eng

  Graphics card:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=22842&ProdId=3720&lang=eng&OSVersion=%0a%09%09%09%09%09%09%09%09%0a%09%09%09%09%09%09%09&DownloadType=drivers

  Try this audio driver:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-119074-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0028

  Wired network.  Download and install the driver 4th on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

• Windows 7 - clean install - missing drivers

  Hello

  I recently installed Windows 7 Ultimate on a machine that was previously running Windows 7 Professional.  I opted for a new installation instead of an upgrade installation.  The problem I am running into is that some of my drivers are missing.  I tried to get the drivers in the folder Windows.old\Windows\inf, and it seems to find them.  However, when I try to intall the drivers I get a message saying "Windows found driver software for your device but encountered an error when installing it...» Windows cannot find the specified file. »

  I was wondering if there was a way to get this to work, or if I should just look on the Internet and try to find the drivers.

  Another note, when I try to automatically find the drivers, I get no results.

  If it helps, my computer is a Toshiba Satellite S850 and my missing drivers are:

  • Network controller
  • SM Bus controller
  • USB Bus controllers
  • CRW - USB2.0

  Thank you

  Eric Carlton

  Technically, they are not missing. Whenever do a clean install (the best option) you always
  to install the drivers for the motherboard, dedicated graphics card (when there is one), options and peripherals such as printers and keyboards with profiling.

  Download the drivers from the motherboard of Toshiba's web site. The drivers in your list are commonly
  called the chipset drivers, because they are all functions of the chipset motherboards (Notrh bridge
  and the South Bridge).
  There was also the CPU drivers and it is Intel HD integrated graphics card. Windows does
  install a generic graphic VGA driver, but you need the Intel drivers for all of the features of the
  Integrated HD graphics card.

  While you're at it install all Windows updates. Configure the option Windows updates so it
  do not download and install automatically, so you can install them is small. There are
  less likelihood of corrupt updates if you do it this way. You should not have more option
  updates.

  Also update DirectX-
  Download details: DirectX end-user performance

  .

• network card and other missing drivers after you have installed windows 7 ultimate on my elitebook 8540w

  HP Elitebook 8540w, model WH137AW #ABA - this laptop and was previously running a trial version of windows 7 Professional 64-bit. I wanted to install windows 7 ultimate 64-bit. I chose to install instead of upgrade that I assumed that the demo version was not expandable. Before the installation, I was able to connect to a wireless network with success. After you have installed windows 7 ultimate successfully, I was more able to connect or see all the networks. The diagnosis error indicates that I can miss a network card, or if I don't have one, the driver may need to be reinstalled. I saw a previous post and answer that looked very similar, but the difference is that I am out of my network card driver, so I'm not able to download any other drivers. -help me please!

  Yes... you can do. If you get confused on what to install, please provide the hardware ID.

  HardwareID: (open start, type devmgmt.msc and press on enter.) Double-click on a device. Choose the Details tab, then the hardware in the menu ID drop-down).

• Install the missing drivers after cleaning to Windows 7 from XP

  Hello. I have a custom computer I upgraded from xp to Windows 7 Home Premium. Everything worked perfectly before the upgrade. After the upgrade, my multimedia card, PCI, has stopped working and The Geek Squad, nor the built-in convenience store could find the drivers for it. It says "code OxC004C008 and 28 for the NTativrv01". then another message said: "PCI simple communications controller - no driver; then "Mlti-media conroller does not have a pilot.  appreciate any help I can get. Thank you

  1 a helpful to take before step same you've solved these problems is to create two alternative accounts protected by password Admin-level.

  • Accounts of users & their safety are taken much more seriously in Windows 7 so the tricks we learned under XP can not help us any more.
  • [No matter what account can suffer from corruption of the profiles user and if it's your main account and you have no spare Admin account to access the system, then you have a serious problem that we are not even allowed to advise you in this forum other than to suggest a complete reinstall of Windows 7].
  • If you have these two alternative accounts then, because they are rarely used, they are less likely to suffer from the corruption that is in use.
  • So even if you have problems in your account you can then log in as one of them and solve the problem.
  • You must write the passwords and ensure the safety of the sheet of paper.  You could do 'Password' reset disks instead, but they are not more effective than a piece of paper and they will also have to be stored somewhere in the place safe.

  2. did you run the Windows 7 compatibility checker before the upgrade?  You can start now and its results will always help you.  See Windows 7, 8.1, 10 compatibility tests for Windows XP, Vista - WiKi

  3 then see where to find the hardware drivers to treat your problems with your multimedia controller etc.

  4 once you get these things sorted, then you want to probably ensure that you get a Windows 10 forced update before you're ready - see disable Windows 10 improvement and ignore someone who starts to tell disable you updates specific Windows or turn off Windows update itself because it's all nonsense.

  5 like many of us when we arrived first of XP, you reach not used 'images of the system' which is worth doing as soon as you have a system worth preserving - so you probably want to turn it off until you have fixed your problem with drivers hardware.

  • You can make an image of the system in less than half an hour.
  • You can restore an image system in less than half an hour and thus replace problems based on software, including problems of drivers, who have appeared on your computer.
  • Search for create a system image using Windows to get an introduction to & use,
  • Then go into Control Panel, [view by - small icons, if necessary], Backup & Restore for the link on the left side to create a system image to run the utility.
  • Note that you should not make the system repair disc which will find references to your Windows 7 installation disc can do what a system repair disc can [etc.].
  • Target the most convenient & reliable to record images of system on is an external hard drive.  An image of the system does not have the external hard drive to any target, so it can also be used for other purposes such as the storage of your current file backups.
  • Rewritable DVD is not as reliable and you need several whenever you made a new image.
  • Utility of third to party system images can be better that the built-in Windows utility I use Acronis TI which has a very good reputation.  Macrium Reflect free edition also has a good reputation.  But you can start with the built-in utility, and then you worry about the alternatives later.

  All the best,

  Denis

• Missing drivers after installing Windows 7 Enterprise

  HW IDs:

  1. base system device

  PCI\VEN_197B & DEV_2392 & SUBSYS_17AB103C & REV_30
  PCI\VEN_197B & DEV_2392 & SUBSYS_17AB103C
  PCI\VEN_197B & DEV_2392 & CC_088000
  PCI\VEN_197B & DEV_2392 & CC_0880

  2 PCI Simple Communications Controller

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_17AB103C & REV_04
  PCI\VEN_8086 & DEV_1E3A & SUBSYS_17AB103C
  PCI\VEN_8086 & DEV_1E3A & CC_078000
  PCI\VEN_8086 & DEV_1E3A & CC_0780

  3. USB controller

  PCI\VEN_8086 & DEV_1E31 & SUBSYS_17AB103C & REV_04
  PCI\VEN_8086 & DEV_1E31 & SUBSYS_17AB103C
  PCI\VEN_8086 & DEV_1E31 & CC_0C0330
  PCI\VEN_8086 & DEV_1E31 & CC_0C03

  4 unknown device

  ACPI\HPQ6000
  * HPQ6000

  Help, please!

  Thank you!

  Hello

  The pilot, you need are:

  1 JMicron card reader

  2 Intel Management Engine Interface

  3 Intel Chipset Driver

  4 HP 3D drive guard

  You should be able to locate these on your product Page which you can search laptops here.

  If you have any problem to find these drivers, post back with the complete model number and Nr of the laptop (from under your laptop service tag)-see here for an explanation and if you have an installation of 32-bit or 64-bit Windows 7.

  Kind regards

  DP - K

• HP Pavilion m6 - 1068ca: missing drivers after windows reinstall (hard drive failure)

  Hi, I had to reinstall windows in a new hard drive after the failure of my hard drive by default. I couldn't find any drivers. Please help me find the drivers for my PC. The ID of material for the missing parts are the following:-

  Standard VGA graphics card

  PCI\VEN_1002 & DEV_6840 & SUBSYS_18A7103C & REV_00
  

  PCI\VEN_1002 & DEV_6840 & SUBSYS_18A7103C

  PCI\VEN_1002 & DEV_6840 & CC_030000

  PCI\VEN_1002 & DEV_6840 & CC_0300

  BCM20702A0

  USB\VID_0A5C & PID_21E3 & REV_0112
  

  USB\VID_0A5C & PID_21E3

  Ethernet controller

  PCI\VEN_10EC & DEV_8168 & SUBSYS_18A7103C & REV_0A
  

  PCI\VEN_10EC & DEV_8168 & SUBSYS_18A7103C

  PCI\VEN_10EC & DEV_8168 & CC_020000

  PCI\VEN_10EC & DEV_8168 & CC_0200

  PCI device

  PCI\VEN_10EC & DEV_5289 & SUBSYS_18A7103C & REV_01

  PCI\VEN_10EC & DEV_5289 & SUBSYS_18A7103C

  PCI\VEN_10EC & DEV_5289 & CC_FF0000

  PCI\VEN_10EC & DEV_5289 & CC_FF00

  SM Bus controller

  PCI\VEN_1022 & DEV_780B & SUBSYS_18A7103C & REV_14

  PCI\VEN_1022 & DEV_780B & SUBSYS_18A7103C

  PCI\VEN_1022 & DEV_780B & CC_0C0500

  PCI\VEN_1022 & DEV_780B & CC_0C05

  (USB) Universal Serial Bus controller

  PCI\VEN_1022 & DEV_7812 & SUBSYS_18A7103C & REV_03

  PCI\VEN_1022 & DEV_7812 & SUBSYS_18A7103C

  PCI\VEN_1022 & DEV_7812 & CC_0C0330

  PCI\VEN_1022 & DEV_7812 & CC_0C03

  Unknown device

  USB\VID_138A & PID_0018 & REV_0078

  USB\VID_138A & PID_0018

  Thank you.

  Hello:

  For the smbus and usb controllers, try the AMD chipset driver.  The first file listed.  Install and reboot.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  Standard VGA graphics card

  This package provides the AMD graphics driver high definition (HD) and Catalyst Control Center for models of laptop computers that are running an operating system supported. For laptops equipped with switchable graphics modes, this package contains the drivers for the two graphics (GPU). Switchable graphics allow users to switch between a graphical power mode (normally used under the power of the battery) and a mode of graphics performance. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp57269.exe

  BCM20702A0

  This package contains the Broadcom Bluetooth driver and software for models supported that are running a supported operating system. Broadcom Bluetooth 4.0 driver is required to enable the Broadcom Bluetooth 4.0 devices and is compatible with Broadcom Bluetooth 3.0 and earlier versions.

  File name: sp56715.exe

  Ethernet controller

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp56952.exe

  PCI device

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp56956.exe

  Unknown device

  This package contains the driver that allows the validity fingerprint sensor in the notebook models that are running a supported operating system. The fingerprint sensor analyzes fingerprints for use with biometric security applications.

  File name: sp56957.exe

• Having trouble installing new drivers after installing a new hard drive and Windows Vista.

  I just installed a new hard drive on my computer of dell inspiron 1525. I managed to do it and it worked. I had a disc from dell to reinstall windows vista edition Home premium 32-bit and had drivers and utilities dvd. However I couldn't connect to the internet. I understand I'm missing some drivers but I rebooted the computer, but it goes to the black screen asking you to start in safe mode, safe mode with network, normally and something else. But after trying all of them, it goes straight to this same screen. What can I do? Or I can clear the new hard drive and start over? Any ideas?

  original title: new installation from hard drive problem

  Hello

  I suggest that you run the Startup Repair tool and check if it solves the problem:

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  I suggest Download driver network card on another computer, and then transfer the file using any flash drive and even install in the computer you have challenged.