Photosmart HP 7520: Cartridge Incompatible NO support for HP in Singapore

Similar Questions

• HP Photosmart D110 print cartridge incompatible

  I bought a new cartridge black today and when I installed it, I got an error message saying "Incompatible print cartridge". He says refer to the status screen on the computer, but it is not a. I put the old cartridge back in and I have no problem but there is no ink to print. I installed the once many new, reset the printer, cleaned the contacts, tried some troubleshooting and I even downloaded the updated driver. Nothing has worked. Just make the cartridge to where I bought it, or is there something else I can try?

  Thank you for your response.

  I had already read and followed everything on the document you provided. I have to go to the retailer, I bought and exchange it. I made sure that the new cartridge was not the same dates as the first. I installed it and it worked fine.

  Again, thank you for taking the time to answer.

• Photosmart HP 7520: 10 Windows Error Message update for HP 7520

  Daily I get this message. This message started when I got a netbook XP approximately 1-1/2 years he is a. I was hoping that this message would have disappeared when I bought my new laptop running Win 10, but it didn't. I don't even have anymore of this printer.

  « Il problems were installing updates, but we will try again later. If you keep to see this and you want to perform an Internet search or contact support for further information, this can help:

  • Hewlett-Packard - hardware imaging, on the other - Null Fax - HP Photosmart 7520 series - error 0 x 80070490

  • Hewlett-Packard - hardware imaging, on the other - Null Print - series HP Photosmart 7520 - error 08024200 b ×"

  Until now what I was doing. I went into Device Manager, printers, and I uninstalled it. Then I went into settings, equipment and removed from the appliance.

  Upddate messages still appeared.

  In Device Manager, I noticed 6 unknown devices listed. When I went in their properties; events; There are mentions making reference to 7520 printer the latest in yesterday something on the installation of the printer. Should I uninstall these too?

  I do not know why this error message won't go away since I have no more of this printer.

  Helen

  Hello

  You simply uninstall the unknown device and the issue of the update of Windows no longer is, it's a reminder of the printer:

  http://support.HP.com/us-en/document/c05214529

  Kind regards

  Shlomi

• Photosmart HP 7520: Is a driver for Windows 10 available for printer HP Photosmart 7520?

  I think in current and installing Windows 10 but was told that there may be a driver for my printer.   I have connected by wire to the tower which is wireless.   Please give advice.

  Paul.

  Drivers and software of printer features complete e-all-in-one HP Photosmart 7520

  Fix and improvements

  • Added support for Windows 10
  • The most recent version of the software includes all previous fixes and improvements.

• Mac osx support for photosmart premium c309g mountain?

  I have a HP Photosmart Premium 309 g and recently updated for Mac OS x Mountain Lion.  While the printer still prints, there is no support for the scan function.  Currently, HP is not an updated driver for the new OS.  Any suggestions on how to restore my ability to scan?

  Download and install this: http://support.apple.com/kb/DL907

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  Scan using Capture of Image in your Applications folder.

• Incompatible error Photosmart 2575 color cartridge

  Hello

  I'm trying to settle a problem with printer Photosmart 2575 of my daughter.

  Operating system: Windows 7 64-bit

  Printer: HP Photosmart 2575 (Malay), MY65N1119Q, Q7211L

  She needed a new color cartridge and was sold a 344 HP cartridge, who had told him was compatible with his printer and cartridge replaces the original 342. The problem is rejects him by saying that it is NOT compatible with the Photosmart 2575 printer cartridge. I checked online and note HP 344 cartridge IS compatible. I followed the suggestions on the help page, IE. re-installed the cartridge, cleaned the contacts of the cartridge, etc. without result; the printer always reports that the cartridge is not compatible.

  Replacement of the original cartridge (empty) the printer reports everything in order and try to print. Of course print documents of W & B is very good with the place empty color cartridge.

  Everyone knows about this problem?

  Does anyone know if there is a updated firmware for Photosmart 2575? If it is available I have not found it.

  I have to say that I'm pretty bummed. at nearly £ 30 once, it's an expensive way to discover the recommended HP print cartridge does not work!

  Hi Nermski

  Following the advice of HP, I returned cartridge of my daughter to them for a refund. Maybe you should contact them also?

• VCB Incompatible device specified for the '1' device support

  I'm trying to use vcbmounter to perform a full backup of a virtual machine. After the snapshot is run, I get the following error:

  2009-02-06 14:54:56.503 "vcbMounter" 2428 error: failure hot remove SCSI disk: Incompatible device support specified for the '1' device.

  2009-02-06 14:54:56.503 "vcbMounter" 2428 error an error has occurred, cleaning...

  I've narrowed the problem to a second disc which I configured on 90% of my virtual machines. The second disc is where I placed the OS swap file. If I move the swap file and remove the second SCSI disk, hey presto, it works.

  VCB does not save the second SCSI disk? Is this something unique to me? Any advice would be helpful. Thanks in advance!

  Your problem is probably have two files vmdk bearing the same name. This happens usually if the second disc is on a different data store. You must rename the second disc with vmkfstools.

  Dave

  ************************

  The surest way for the world to be destroyed, most experts agree, is by accident. That's where we come in; We are the professionals. Cause us accidents.

  Nathaniel Borenstein

• Forgotten password HP photosmart printer 7520 a-1

  I try to connect my Samsung Android Smartphone with WIFI to connect to my PRINTER HP PHOTOSMART 7520 and my phone is to send a message to log on using a password. I don't remember the password for the printer. On scan my phone WIFI, indicated for my printer name is HP-Print-36-Photosmart 7520. When I click on that name, on what he's going to another screen for me click to connect. The name of the same printer listed on the previous screen but it says under the name of security and this word says WPA2 PSK. When I type in what I thought that the password is the password that I typed is removed and in its place is (no change). Please help if you can I need to know how to recover my password.

  Hi @davidnbeckys,

  Thanks for joining the Forums of HP Support for a solution to your problem of password.

  I understand that when you connect your Samsung device you network it is called HP-Print-36-Photosmart 7520 and then try to connect it asks for a password. I would like to help.

  Looks like you are trying to connect to the printer using the Direct wireless signal. If it is the Direct wireless, you try to connect to, you can get the password by using the control panel of the printer.

  1. press on the Wireless icon on the control panel of the printer.

  2. tap settings at the bottom left.

  3. tap on Wireless Direct.

  4. tap show password.

  Here is a document of support to use when printing with HP wireless Direct - printing with HP wireless Direct.

  Please let me know if that solves the problem, or if you need assistance.

• Photosmart HP 7520: Do not copy

  Highest shown work in the office and our Photosmart HP 7520 will not copy. Used the automatic feeding system and the setting on the glass. I tried to color and BW. Document will display in the preview, but will be a blank page when you select copy. Tried a difficult start - same results. Printer scans very well. Printer can get documens sent to her very well. Just empty pages on the copy function.

  Is there a bulb or something grilled, which is required to copy? Any suggestions? Is this something that deserves to fix or just get a new printer?

  Appears more like a printing problem. Please try to print any page of the printer test. If she is still a Virgin, most likely related to the ink cartridges. Try following the below document and check if that helps

  http://support.HP.com/us-en/product/HP-Photosmart-7520-e-all-in-one-printer-series/5199461/document/c03369392

• Problem installing HP Photosmart C4780 ink cartridge

  I just installed new ink cartridge in my HP Photosmart C4780. I ran the test cleaning and alignment and my

  print is fine except that everything is obscured. What I forget? Thank you very much!

  Hi CherylBean,

   

  (1) what a filled cartridge or a new cartridge?
  (2) who is the operating system installed on your computer?
  (3) did you change on your computer recently?

  This usually occurs because of three reasons-

  (a) if cartridge is defective.
  (b) the ink and toner levels are not suitable.
  (c) If fuser on the printer is broken.

  You can try to remove the cartridge and the seat of again.

  Method 1-

  You need to check the ink and toner levels cartridge.
  To do this, you must refer to the article mentioned below.

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-change-my-ink-or-toner-levels

  Note: you can use the link mentioned above just for reference, if it does not apply to your operating system.

  Method 2-

   

  You should post your question in the forums of HP support and contact HP support for help.
  To do this, you can check the below link-

  http://h30434.www3.hp.com/ - HP support forums.

  http://www8.hp.com/us/en/support-drivers.html - Support HP

  In addition, you can see the article mentioned below that addresses a similar issue-

  http://h30434.www3.HP.com/T5/printing-issues-troubleshooting/J4680-with-shadowed-text-this-happened-after-replacing-the/TD-p/1177863

  Note: the printer described in the article mentioned above is of a different model. But it applies to your printer as well.

   

  Hope this helps!

• Photosmart HP 7520: Scan lost PC connection

  My HP Pavilion is connected to my 2.4 Ghz wireless network, as is my printer.  When you try a scan PC for my printer, I see the message "no computer."  This just started a few days ago. If I scan to email, it works fine. The printer, I reset the IP address and the password.  The computer prints to the printer via the wireless network. In addition, a laptop in another room remotely connects and prints well. I ran two times printing and scanning doctor.  Both times he concludes that the connection is good. Yet, no scanning of the printer.  The box in the toolbar at the bottom of the PC continues to say "Scan of the computer is currently unavailable.  From there I try enable and check the autostart box, but no change. I also downloaded the latest version of the software updated 12/15 no change. However, I found that if I use the HP Scan application on my PC now I have added to my office, it works very well (to the PC).  It's a little more "awkward", but it does the job. I'd rather eat the scan from the printer.  It was quicker and easier. Does anyone know why the printer is unable to 'see' the PC while it is connected to the network and all the functions the scanning started work on PC?

  Hi @Javaunoand welcome to the Forums of HP, as you know it is a good place to ask for assistance from members of the community! I'd love to help you with your Photosmart 7520. If I understand your description you can scan when you start scanning from the printer software, but when you try to scan from the front of the printer, the analysis did not make for a lack of connectivity.

  Be able to scan from the computer leads me to believe that the connectivity is not the root cause of the problem. However, I found something that might help.

  This document contains information on the possible causes of an interruption of the connection wireless, tips to avoid the question, tips to maintain a connection and troubleshooting to help you re-establish the connection Wireless on your printer; The printer keeps Wi-Fi connection.

  In addition to the solutions proposed in the document and you've probably already tried, please make sure that the printer is connected directly to a wall outlet, not a surge protector / power bar. Questions when it is connected to an uninterruptible power supply/Strip/surge protector power

  In this document, you will see:

  QUESTION:

  Questions or problems may arise when a HP LaserJet printer is connected to a UPS (UPS), a power strip or a surge protector

  ↑ This is not limited to the Laserjet printers.

  It is also good if you already haven't, to be sure the printer firmware is up to date. This Firmware update improves and addresses the following issues:

  • Update the firmware of the modem FAX to avoid false failures FAX Test
  • Solves problems in networking that can cause the printer not responding
  • Improves the reliability of the cloud print
  • Improves the reliability of printing using HP ePrint and printable applications
  • Improves the reliability of the printer, automatic updates
  • Improves support for AirPrint™
  • Corrects the minor defects

  Update firmware to improve the functionality and performance.

  Disabling UPnP can be worth it too if the problem at this point. Follow the steps below to disable UPnP in the EWS printers,

  1 type the printers assigned to IP address in the Internet Explorer address bar. (you can get this report you would have printed everything by following the steps described in the document that I posted above)

  2. click on the network at the top tab

  3. Select the option of networking on the left

  4. click the UPnP option on the left

  5 Select the option 'Disable UPnP'

  6. click on 'apply '.

  And finally, I would like to disable IPv6 on the printer. This setting can sometimes cause problems. Follow the instructions below to disable IPv6

  • On the front panel of the printer, press the wireless icon, this is the second of the four icons on the top.
  • Navigate through the Wireless advanced settings menu and go to the IPv6
  • Disable IPv6

  Please let me know if that solves the problem, or if you need assistance. In fact, if this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. I'll look for a response on your part, thank you.

• Photosmart HP 7520: Storage of printer

  If a Photosmart HP 7520 must be kept for up to six months, what precautions should be taken?

  The cartridges must have all ink (at least somewhat) and remain installed in the printer.  Make sure that the printer is off since its own power switch and then wait for all the internal movements to stop before removing power.  Store the printer in a cool place, not subject to extreme fluctuations in temperature if possible.

  When starting the ORS printe after six months, you may need to run through a few cycles as described in the post here for cleaning.  If above does not solve the problem post here can help to retrieve your impression of good quality after long-term storage.

• HP Photosmart print 7520 all in one printer each time I receive error USB device

  My product is a printer all-in-one Photosmart HP 7520.  I bought on Wednesday, July 30, 2014.  Whenever I have print something a yellow triangle with an exclamation point appears on the screen of the printer and it says "USB device not compatible or not disk hard/mass storage mode.  Remove device or insert into the disk drive.  It still prints well.  A I mess something up during the game?

  Hi maggie101952,

  Thank you for the information on the computer.

  I would like to run a few things with you and with a little luck, we can get to the bottom of this issue.

  You have a memory card or a USB key connected to the printer?  If Yes, please remove and restart the printer.  Try printing without anything cards or USB connected.

  If is not the case, I'll give you the link for HP Photosmart 7520 series firmware update.  If the error is still popping up, the issue could be with the product it self.  I suggest you then call HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thank you for your time.

  See you soon,.

• HP Photosmart 5510 564XL cartridge error

  I just went to OfficeMax and bought a XL 564 cartridge "Black" replacement for my photosmart 5510.

  I was careful not to get the black cartridge that said it worked only with the 5 printers cartridges.  On the side of the box shows the 5510 as being compatible.

  I removed the black cartridge which was in my printer and installed a new.  Now my printer shows me an error that says that you cannot use a cartridge configuration once the printer is already initialized.

  True, the replacement cartridge is labeled on the barcode of the cartridge as a "Setup" however I replaced that was also labeled "setup."

  From what I read, install cartridges are not supposed to be sold as a replacement.  What can I do now?

  Then contact the retailer or HP support for the replaced cartridge.

  If necessary you can find contact information by selecting region yoru and continued technical support after purchase below:

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  Shlomi

• HP Photosmart AIO 7520: Scanning under MacOS Sierra is no longer working.

  Recently upgraded to MacOS Sierra (MacOS 10.12).  Since then, my Photosmart HP 7520 is no longer will allow me to scan or save the scans to the computer.  The "Save" button is grayed out and cannot...  HP must send the updated drivers that resolve the problem very soon.

  Trash the older Scan Utility as he said? Who did it for me. Maybe try to restart after that? And restart the printer too?