WAG320N very bad 5 GHz wireless signal.

Similar Questions

• How to connect my model 15-j053cl with the 5 GHz wireless signal

  my new 15-j053cl can't see 5 GHz Wireless ssid.

  Hello

  The Intel Centrino Wireless - N 2230 is a single gang adapter and works on the 2.4 GHz ONLY band. It doesn't have Bluetooth.

  He also mentioned its specs:

  http://www.Intel.com.au/content/dam/www/public/us/en/documents/product-briefs/Centrino-wireless-n-2230-brief.PDF

  Hope this is what explains why.

  Kind regards.

• WiFi connections: Laptop HP cannot find the 5 GHz wireless signal?

  Hello, this is my first post I just bought my first laptop and my first wireless router and have been setting them up.

  Laptop: HP touch laptop Pavilion 15 15-n088ca with windows (fully updated) 8.1

  Router: D-Link Dual Band AC1000-band 2.5 GHz & 5 GHz DIR - 810L

  I configured the router and worked out the kinks and updated the software.  My laptop detects and connects with the 2.5 GHz Band anywhere in the House.  My laptop does not even find or see the 5 GHz Band.  However my Galaxy Tablet concludes the two bands and can connect at once, thought the 5 GHz seems weaker.

  I noticed that my Galaxy tablet is much more WiFi networks that my laptop (that are in the houses around the street).

  I have need help troubleshooting and problem solving.  I think that my laptop would find the 5 Ghz band and be able to connect. So I hope that it is a software or driver problem and just a setting that needs to be adjusted.  Any help would be appreciated.  I don't know much about the WiFi drivers, but I'm a survivor of Vista, so I should be able to solve this problem.

  I don't know even what kind of program is running the WiFi software on my laptop? Or where to find it?

  Thank you

  Hello:

  Welcome to the HP consumer's Support Forum.

  I'm sorry that I'll have to disappoint you on your first post, but according to the specifications of the product on the link below your laptop comes with a single wireless card band (2.4 GHz) with bluetooth.

  http://support.HP.com/us-en/document/c03940371

  I can tell this by the description of the WLAN card.

  He is listed as a 1 x 1 802.11b/g/n WLAN.

  Whenever you see a closed wlan b/g/n card, it's a map of the only band (2.4 GHz).

  A dual-band card would be qualified bird a/b/g/n or a/g/n.

  When I look at the parts list for your laptop on the link below, the last listed item is the wireless card there.

  Atheros AR9485 wireless 802.11b/g/n 1 x 1 adapter

  http://PartSurfer.HP.com/search.aspx?SearchText=F0Q62UA

  Googling the specifications of the card, I found that will confirm what I wrote above.

  http://reviews.CNET.com/adapters-NICs/Atheros-ar9485-802-11/4507-3380_7-35558446.html

  So there is nothing wrong with the wireless card or router.

• Satellite M70 wireless very bad signal - Intel 2200 b/G card

  I'm very angry about this wireless, an Intel 2200 b/G card.
  The wireless card do not work very well. It connects to the AP, but the quality of the signal is very poor. It's the ping response from a robotics AP we:
  Ping 192.168.2.1 with 32 bytes of data:

  Reply from 192.168.2.1: bytes = 32 time = 2ms TTL = 255
  Reply from 192.168.2.1: bytes = 32 time = 2ms TTL = 255
  Reply from 192.168.2.1: bytes = 32 time = 510ms TTL = 255
  Reply from 192.168.2.1: bytes = 32 time = 7 ms TTL = 255
  Request timed out.
  Reply from 192.168.2.1: bytes = 32 time = 1ms TTL = 255
  Reply from 192.168.2.1: bytes = 32 time = 1ms TTL = 255
  Reply from 192.168.2.1: bytes = 32 time = 40ms TTL = 255
  Reply from 192.168.2.1: bytes = 32 time = 1ms TTL = 255
  Reply from 192.168.2.1: bytes = 32 time = 307ms TTL = 255
  Reply from 192.168.2.1: bytes = 32 time = 827ms TTL = 255
  Reply from 192.168.2.1: bytes = 32 time = 31ms TTL = 255
  Request timed out.
  Reply from 192.168.2.1: bytes = 32 time = 4 ms TTL = 255
  Reply from 192.168.2.1: bytes = 32 time = 433ms TTL = 255
  Reply from 192.168.2.1: bytes = 32 time = 2993ms TTL = 255
  Reply from 192.168.2.1: bytes = 32 time = 15 ms TTL = 255
  Reply from 192.168.2.1: bytes = 32 time = 288ms TTL = 255
  Reply from 192.168.2.1: bytes = 32 time = 3931ms TTL = 255
  Reply from 192.168.2.1: bytes = 32 time = 20ms TTL = 255
  Reply from 192.168.2.1: bytes = 32 time = 3ms TTL = 255
  Reply from 192.168.2.1: bytes = 32 time = 894ms TTL = 255
  Reply from 192.168.2.1: bytes = 32 time = 563ms TTL = 255
  Reply from 192.168.2.1: bytes = 32 time = 48ms TTL = 255
  Reply from 192.168.2.1: bytes = 32 time = 1ms TTL = 255
  Reply from 192.168.2.1: bytes = 32 time = 1ms TTL = 255
  Reply from 192.168.2.1: bytes = 32 time = 2649ms TTL = 255
  Request timed out.
  Reply from 192.168.2.1: bytes = 32 time = 5ms TTL = 255
  Reply from 192.168.2.1: bytes = 32 time = 1ms TTL = 255
  Reply from 192.168.2.1: bytes = 32 time = 315ms TTL = 255
  Request timed out.
  Reply from 192.168.2.1: bytes = 32 time = 1ms TTL = 255
  Reply from 192.168.2.1: bytes = 32 time = 1ms TTL = 255
  Reply from 192.168.2.1: bytes = 32 time = 1ms TTL = 255
  Reply from 192.168.2.1: bytes = 32 time = 59ms TTL = 255
  Reply from 192.168.2.1: bytes = 32 time = 7 ms TTL = 255
  Request timed out.
  Reply from 192.168.2.1: bytes = 32 time = 1ms TTL = 255
  Reply from 192.168.2.1: bytes = 32 time = 1ms TTL = 255
  Request timed out.
  Request timed out.
  Reply from 192.168.2.1: bytes = 32 time = 3748ms TTL = 255
  Request timed out.
  Reply from 192.168.2.1: bytes = 32 time = 140ms TTL = 255
  Request timed out.
  Reply from 192.168.2.1: bytes = 32 time = 1195ms TTL = 255
  Reply from 192.168.2.1: bytes = 32 time = 106ms TTL = 255
  Reply from 192.168.2.1: bytes = 32 time = 1ms TTL = 255
  Reply from 192.168.2.1: bytes = 32 time = 177ms TTL = 255
  Request timed out.
  Reply from 192.168.2.1: bytes = 32 time = 3ms TTL = 255
  Reply from 192.168.2.1: bytes = 32 time = 1ms TTL = 255
  Reply from 192.168.2.1: bytes = 32 time = 1ms TTL = 255
  Reply from 192.168.2.1: bytes = 32 time = 235ms TTL = 255

  Ping statistics for 192.168.2.1:
  Packets: Sent = 55, received = 45, Lost = 10 (18% loss),
  Time approximate round trip in milli-seconds:
  Minimum = 1ms, Maximum = 3931ms, average = 434ms

  What should I try? I'm using the latest drivers, change the transmitting power, try to manage the connection with MS Application and software for Intel wireless, I have the latest version of the bios, I change the default MTU for this connection. Nothing help me.
  The access point works very well, if I use a Wireless USB stick connection is ok, no lost package or 3 sec ping response

  Hello

  I've heard that Intel has a problem with this wireless network card, but I'm not sure if they have yet set.
  Have you tried the driver here:
  http://Downloadcenter.Intel.com/scripts-DF-external/Filter_Results.aspx?strTypes=all&ProductID=1637&OS FullName = Windows * + XP + Home + Edition & lang = eng & strOSs = 45 & submit = Go %21

  Good bye

• Weather a barrier on the power of the wireless signal?

  FREE WI - FI, RAIN & SNOW

  If a Protocol "N" dual-band WI - FI adapter which is connected directly to the USB port of a laptop computer inside the House and the router is in the garage about ten feet, should there be a weakening of the reception quality in the good House when it happens to be raining or snowing in the area of 10 feet between the garage and the House?  In other words, in addition to METAL interference or microwave OVENS or WIRELESS PHONES... not the weather elements possibly hinder these network connections?

  I thank very you much for any information.

  Joe

   

  Hello

  The weather could affect the signal strength. Radio transmission uses digital spread spectrum. Even if a small problem can spend because of lightning nearby, the packet will be retransmitted, you won't notice a difference. (Unless the lightning blew your 2.4 GHz wireless system telephone and microwave ovens are generating more effective disruption.

  In addition, check out the link below and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-low-wireless-signal-quality-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

  It will be useful.

• Wireless signal strength

  Hello.    OK my devices using im is a network adapter WUSB600N V2 with a router WRT320N wireless.    I'm under 50 ft away the router but im get the intensity of the "very weak" signal "low" at all times I changed the multiple settings changed bands 2.4 to 5 and even changed the settings I found that people claimed to be "optimal" updated the firmware for the router tried to update the drivers.

  There are about 10 total networks that I am able to locate because I live in an apartment complex and I get the best strength signal to some of them that I do on my own, which is confusing for me.    What can I do to change this becouse right now im pretty aggrivated down there and im ready to throw things out the window.

  Thank you.    Mike

  If you are able to locate your nearby networks with a good Signal strength, so I think you should check the settings of your router wireless. But if there is no inbetween walls the router and the computer in this case, you may lose the Signal wireless due to interference.

  As you have already updated the firmware on your router, the first thing you need to do is reset your router and reconfigure all the settings of your router from scratch.

  Here is the wireless settings that you can configure your router and it will improve the signal strength wireless on your computer.

  Connect to the router configuration page and click on the Wireless tab and change the display of the Configuration for Manual.Select 2.4 GHz Wireless Network.Assign a Unique network name and below to change the width of the channel at 20 MHz and channel 11 and that the broadcast of the SSID should be activate and click on save settings.

  Select the personal WPA Wireless Security Mode and enter your security key and click on save settings.

  Now you have to click the sub-tab slot below change the 'rate of emission N 15-130Mbps"and wireless"Advance Wireless Settings"and change the tag to 75 interval, change the Fragmentation threshold to 2304, change the RTS threshold to 2304 and click on save settings...

  Now let's see if you can locate your wireless network and try to connect...

• On Satellite M70 low wireless signal

  I have a satellite m70. It worked very well with the excellent signal until yesterday.

  now, the signal dropped to very low levels. my wireless router is working fine (I checked with a friend)
  is my wireless card faulty? How will I know?

  Help, please...

  Hello

  This happens to you just on the mode of feeding with AC adapter or battery too? In any case has the power management of the WLAN card also at the highest level.

• Pavilion dv6-6113tx frequency 5 GHz wireless network has not detected

  Hello

  My HP Pavilion dv6-6113tx Entertainment Notebook PC does not detect the signals of frequency of 5 GHz. I tried to verify my update of the software of wireless network and it is also up to date. I asked my colleague to help, they suggested me to attach a double external dongal wireless broadband. Is this the only solution? Or is it possible to replace the network adapter with a double band if this machine does not have this one. Please help me, I'm really annoyed with my computer laptop wifi. He works with 2.4 GHz wifi signal, ut due to problem of interference as indicated by the internet provider that doesn't have the right speed and speed fluctuates a lot.

  Pending a possitive response,

  Thank you

  Hey @arbab92 ,

  Welcome to the HP Forums!

  I understand that you're looking for more information about the 5 GHz wireless connectivity computer laptop dv6.

  The adapter supplied with your laptop is not a dual band card and does not support the frequency of 5 GHz.

  Generally (RFI) Wireless interference can be solved by changing the channel on your router wireless. The default value for most router manufacturers is channel 6, which runs on 2,437 GHz. You can change the channel on your router to channel 1 wireless (2.412 GHz) or 11 (2,462 GHz) away from the bloated channel 6 if there are several wireless networks and devices in your area.

  If changing the channel is not an option, or does not resolve the problem, you can buy a wireless network for your laptop adapter. The only 5 GHz compatible card that is compatible with your laptop is the Intel Centrino Advanced-N 6230. The part number for this is 631956-001. You should be able to order it on the HP part Surfer Web site or third party like Amazon or eBay resellers.

  You can see how to install this map on page 67 of the HP Pavilion dv6 Notebook PC - Maintenance and Service of Guide.

  I hope this is the information you're looking for.

• EA 6200 wireless signal disappears momentarily and returns

  I have a 6200 EA (EA6200), new with a computer, an apple TV and 4 Iphones/Ipads, all within walking distance.

  My problem: every once in a while, the wireless signal disappears for a minute or two and then returns to normal.

  During the navigation of the user interface, I was unable to find out if there is an event log to show what is happening, so that I'm flying blind.

  Which never happened with my much more old linksys wireless adapter.

  Thank you!

  Hi elnuevohomero,

  This may be caused by interference. Ensure that the 2.4 GHz and 5 GHz networks have different SSID. Try changing channels as well.
  You can try using 6,3,9 or 1. It is also recommended to place the router on a higher location, where it can broadcast wireless signal properly.

• E4200 v2 wireless signal power is intermittent

  Just updated firmware for 2.1.39.144146

  have 5 GHz mode - mixed, WPA2, 40 mhz, channel 161 channel width

  the rule 2.4 GHz mode - mixed, WPA2, 20 mhz, Channel 6 channel width

  Online technical support said it could solve my problem, but my old e1000 had a stronger and more coherent (fluctuating) broadcast signal.

  My PC and the router are in the family room at the back of the House. The signal strength is Ok in the first room, but 2nd room in front of the House (30 feet and two walls away) it is 3 bars to nothing all the time. We have a guest who stay with us two days a week. There has never been a problem with the signal strength of the e1000 for recent years, but the v2 e4200 behaves like a piece of * beep *. I spent over 60 minutes with an online support person whose answer was to upgrade the firmware (which of course now removes a direct access to the router via the browser.)

  I hope that someone knows what I need to do to make this work, or it goes back to Amazon and I'll buy another brand of dual band N router.

  Change the channel of your router to 1, 9 or 11 to optimize your wireless signal. Maybe this link can help http://www.howtogeek.com/howto/21132/change-your-wi-fi-router-channel-to-optimize-your-wireless-sign....  If still the same, I think this device needs to be replace.

• Bad speed of wireless internet on EA4500

  Hello everyone. I have an ea4500 wireless router, I tested the speed at speedtest.net and wireless, I get around 9 Mbit/s. My speed is 23 MB/s when I hard wired the pc.

  I check the speed on a Tablet (), pc and a mac about 5 feet away from the router with no walls or something between the two devices.

  I checked all the settings, but I don't see anything wrong, I've changed to N mode just to make sure that I use the top speed.

  All my devices are able to use N.

  My experience on this is not good and that's why I ask your help, thanks a lot.

  Redefine the Mode Wireless on joint. 2.4 GHz settings, change the width of the channel to 20 MHz only and select a specific channel. Recommended channel would be 1, 6 or 11. Download inSSIDer to find out which channel is not too crowded. Follow the link provided by jlbjlb.

  Another thing that could affect the wireless connection is the location of the router. Make sure that it is on an open and superior location. Make sure it is not next to a metal object or other device which transmits/receives/frequency of the wireless signal. Also, make sure that it is not too close to your modem.

• Wireless signal detection

  I have a WRT160N router that I currently use. When I'm doing a my computer wireless signal, my router does not show up on top of the list. It is therefore on the list when I put up like WEP, but will not be displayed when I went back to WPA2. Does anyone have any ideas as to why this is happening? It happens even with my Google phone mytouch.

  Well, I think that in this case you have to modify some additional settings on your router. Follow the steps below and change the settings of your router.

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...

  For wireless settings, follow these steps: -.

  Click on the Wireless tab

  -Here, select manual configuration... Wireless network mode must be mixed...

  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...

  Please take note of the name of the wireless network (SSID) because it's the network identifier...

  For wireless security: -.

  Click the sub-tab under wireless > Wireless Security...

  Change the mode of WPA wireless security, encryption, select AES... Password input your desired WPA key. For example, MySecretKey, this will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone.

  NOTE: The password must be more than 8 characters...

  Click the settings advanced wireless

  Change the tag to 50 interval > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...

  Now let's see if you can locate your wireless network and try to connect...

• Wireless printer when ENVY, PC keeps looking for wireless signal. Help!

  After installation of the software of printer ENVY, it prints fine wireless. But, when I turn off the printer my computers appear to continue to pick up the wireless signal. Arrow and circle continue. A PC XP and Vista 2.

  Can someone help me please?  Having the dizziness of all this spinning. When I turn printer on it stops turning.

  Help!

  Hey, Hey,.

  Thank you very much!!! You'll never know how much time I spent on this issue and I do not either.

  I had to enter the printer software to access the scan mode, but works fine on my 2 computers and my husband.

  We're going on a trip tomorrow and I just started thinking about our trip turns all the time on computer.

  Thanks again, Vicki:

• Cisco Aironet 1131AG and measure access points to the power of the wireless signal?

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-marge-top : 0 ; mso-para-marge-droit : 0 ; mso-para-marge-bas : 10.0pt ; mso-para-marge-left : 0 ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ;}

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-marge-top : 0 ; mso-para-marge-droit : 0 ; mso-para-marge-bas : 10.0pt ; mso-para-marge-left : 0 ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ;}

  We have about forty points of access Cisco Aironet 1131AG spread over four floors and they all have a static IP (BVI1) on the same SSID, customers will be on its own virtual local area network (dhcp on 3750 switch) and they use several channels (1,6,11).  Cisco Wireless Control System is pending. This wireless network should support roaming for customers (there will be Wi - Fi tags of multiple AeroScout and wireless laptops). To measure the strength of the wireless signal and wireless coverage on each floor. My questions are:

  1. How to measure the strength of the wireless signal: we must meet at least three APs available with signal excellent (I guess for the WCS needs that will determine the position of the client in the building)? We thought to use NetStumbler and a few laptops with wifi and measure as many points as we can as simpler thing. Or should we use something like Cisco Aironet Client adapters for our mobile phone and then use Cisco Aironet Client Utility (is it worth buying for our analysis and measurement)? Any other idea?
  2. What signal level should we consider for a good wireless (dBm)?
  3. That we should propose for authentication, authorization and management accounting? What happens to the roaming wireless? I did not quiteunderstand WCS, WDS and WLC-that should be used for above tasks?

  Thanks in advance.

  "Use the command on the AP" sh dot11 associations "will give you the clients associated with success.  If you add the MAC address of the client at the end of the command, you will get detailed information.  Look under "Signal Strength" and "Signal to noise".  Under the strength of the Signal, you want a value of-75 dBm or lower (lower values the better).  -76 dBm and is bad.  Under Signal-noise, you want a value of 25 dBm or more (values higher the better).

  To measure the strength of the signal, I use Airmagnet, but you can use Netstumbler or Cisco Wireless Site Survey.

• Ethernet cable to connect my windows laptop 7 to the internet. connection is very bad. It works but only for 30 minutes max.

  My internet does not work correctly. I use an ethernet cable to connect my laptop (using windows 7) to the internet. However the connection is very bad. Sometimes it works but only for 30 minutes max, and other times it does not at all, connect saying that the cable is disconnected. I tried 3 different cables to 2 different ports, then maybe the problem comes from my laptop. It connects to the wifi networks fine but not with the cable. Does anyone have any suggestions as to what could be the problem and how can I solve this problem?

  Hello

  1 did you changes to the computer?

  2 did you receive an error message?

  Method 1:

  I suggest to check and make sure that all cables are connected correctly.

  Method 2:

  Check the link and try to run the troubleshooter to check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet