Wait (ms) function and Cicles

Similar Questions

• Resolution of delay function and the borough

  A small question about the delay () function.  The resolution is apparently 1ms according to the help file.  What happens if I pass a value with a fraction of a mlliseconds, say something like:

  Delay(0.0128);
  

  For 12.8ms.  Does round to the top and the 13th month of delay?  Or round to 12ms?  Undefined?  Something else?

  Thank you.

  Hey tstanley,

  I did some research on the function and it seems that the feature is for timer trying to get closer to the 12.8ms, but because the resolution is only 1 ms, it could still be +/-1ms to the value that you enter. So in some of our tests, it was waiting for 13.8ms, since it is in the accuracy of the clock 1ms.

  Because Windows is not a real-time operating system, there are several factors that could keep the timer delay for 13.8ms - other processes can run on the machine and anticipate the process timer, for example. If this level of accuracy is required, you can consider using the CVI RT module on a system in real-time.

• HP ProBook 4530 s gives two option to connect, without biometric features or wait 30 seconds and try again

  Whenever I connect to my laptop, a HP ProBook s 4530, it gives me two options. I have to either open a session without biometric feature or wait 30 seconds and try again. I'm guessing this has something to do with the journal of fingerprints or something. I don't have that. I've had this laptop for a few years and it just started this about 2 weeks ago. I doesn't have any log information or anything else in the laptop. Can someone help me please?

  Hello

  Check with HP support, their documentation online and ask in their forums.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• difference between functionality and corresponding geometric base edge

  Can someone help me with the difference between a function and a corresponding based edge geometric model?

  I understand that:

  o geometric based function corresponding directly uses the intensity of pixels and reason for research and their settings

  o edge based geometric matching first calculates the gradient of the image and then uses this gradient to find features with generalized Hough transformation...

  More information here: documentation OR

  I hope this helps...

• HP Touch Smart calendar and Notes cease to function and give me a notification so I end the program but it gives me immediately the notification even happening?

  HP Touch Smart calendar and Notes cease to function and give me a notification so I end the program but it gives me immediately the notification even happening?

  the notification said that the problem caused blocking the program works correctly.
  Windows will close the program and notify you if a solution is
  available.
  [Exit]
  I closed the program and this notification will appear back again.

  Hello

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  I would be grateful if you could answer the following questions:

  1. Since when are you facing the issue?

  2. you have any anti-virus installed on the computer program?

  3 are you aware of any changes made to the computer before the show?

  I would say you runa full scan using the Microsoft Safety Scanner and look for any infections.

  Note: there is a risk of data loss if all the files are infected and which can be removed in the cleaning process.

  If the problem persists, you can start the computer in safe mode and perform a clean boot. Clean boot helps eliminate any conflict of third party software.

  Note: when you are finished troubleshooting, follow step 3, mentioned in the article to start the computer to a normal startup.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• Cannot print the usatoday crossword, a message appears saying wait while data and graphics are responsible for printing, but it prints ever

  Original title: usatoday crossword print

  Using Vista and an HP C7280 printer a message saying wait while data and graphics are responsible for printing, but it prints ever.

  Hello

  You are able to print all of the other files stored on the computer?

  See the bottom of the articles that might help you resolve this problem.

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Unable to wait 30 seconds and then call the TCL Script as Action?

  Hello and good afternoon all!

  I was browsing through different threads and did some research and I am unable to get my applet to wait 30 seconds and then call a script TCL to a succession of 'action '.  Here is the Basic script I am trying to run:

  Event Manager applet track-loopback1
  Event track 10 down state
  command action 1.0 cli 'enable '.
  Action 1.1, «config t» cli command
  Action 1.3 cli command "event manager applet-counting backwards.
  action 1.4 cli command 'event timer countdown 30 '.
  action 1.5 cli command "action 1.0 wait 30.
  Action 1.6 cli command "end".
  Action 1.7 cli command "tclsh Loopback1 - Notification.tcl.

  The goal of this applet is simply wait interface Loopback1 go down, and then launch the applet "-Countdown ' which waits 60 seconds before calling end my TCL script.  The pattern of ' countdown time 30 "and the" action 1.0 wait 30 "is my (lack of?".  :-)) understand that after counting 30 I need to a trial of the action - but I'm not 100% clear on this?  Ironically, he does, in fact, call the TCL script, it does not wait 30 seconds.  My current workaround is to simply throw a statement "after 30000' in the TCL script, but I'm really curious to know why it does not work as expected (well, as I expected to work anyway!).  Any help would be GREATLY appreciated.  Thank you very much!

  See you soon,.

  Travis

  See my response to https://supportforums.cisco.com/discussion/13009231/eem-applet-wont-fire... .  What you do not work, so you should not call tclsh to EEM anyway.

• When I try to download apps on windows store, it shows that they are waiting for download and they keep showing pending

  Original title: Windows store does not work

  Hi... when I try to download apps on windows store, it shows that they are waiting for the download but they never download at all, they keep showing waiting... and apps are never download... and internet works also very well... so, what was the problem with the windows store? ...

  Hello

  I recommend you download and install Windows App troubleshooting using link:
  http://www.kapilarya.com/download-Microsoft-accounts-Windows-apps-troubleshooters-to-fix-casual-issues-for-Windows-8
  Also makes us say that it shows any code or message?

• Hi, I'm developing a simple mobile app in DW CC 2015 using JQuery Mobile. LIKE I need the list view with description of the product, functionality and image, I would like to connect with database instead of "writing" all the tables in the bearings inside

  Hi, I'm developing a simple mobile app in DW CC 2015 using JQuery Mobile. LIKE I need the list view with description of the product, functionality and image, I would like to connect with database instead of "writing" all the tables in the bearings inside the Jquery page. In the future I would also be able to add, to remove the DB records. Any help, tutorial... Thanks TG

  I would like to connect with the database instead of "writing" all the tables in the bearings inside the Jquery page

  This is usually done with a CMS (content management system). There are commercial products CMS like WordPress, Joomla and perch. You create one or several layouts and then create pages of these page layouts using the CMS. In this way, it is possible to have hundreds of pages, each with unique content, but a page layout that can be managed in a place of sharing.

  CMSs on shelf don't require programming skills. Otherwise, some of us write our own CMS with custom functions, but this requires back-end, as with PHP programming.

• I just renew my creative cloud with a new card and waited 15 minutes and it still says that I have to renew it... Please help

  I just renew my creative cloud with a new card and waited 15 minutes and it still says that I have to renew it... Please help

  Please you bought online to your Adobe.com account.

  Concerning

  Stéphane

• How to move the functions and procedures of packages in a schema?

  Hello

  I have less than the needs for a work at home and my question is if anyone can point me in the right direction to find documentation that can help me solve below. Any information will be appreciated. Thank you.

  Write procedures and functions (included or not in packets) as .txt or .sql scripts. Once they have been launched in Developer SQL they should, in addition, the functions and procedures of packages in the current schema. If the current schema contains only 2 packages, pac1 (p11, p12 procedures and functions f11, f12, f13) and pac2 (contains the p21 following procedures, p22, p23 and f21 and functions f21 (case of overload), running the scripts produce the following effects:)

  • Procedures p11, p12, p21, p22, p23, and f11, f12 and f13 functions will be created in the current schema.
  • PAC2 will contain 2 instances of the function of overload-f21; they will be kept in the package, without be created in the current schema. If all overloaded procedures/functions will be kept in their original packaging
  • If pac1 contains variables, cursors, and public types, keep us only the details of the package (and remove the body); usually if the packages contain no overloaded functions or procedures the body will be removed and if no variable, cursors, types of public then we will remove the header.
  • If in the triggers, procedures and functions we will call procedures/functions packages (procedures and functions moved into the current schema) they reference will need to be updated (via editing the body or recompilation) for example if pa1.p12 will be replaced with p12.
  • Scripts must have numbers in the next series (01... n) and the characters that explain the content.

  My only advice would be to remember that these are public forums and if YOU can find them, therefore cannot your instructors.

  In addition, those are horrible procedure names and function

  This mission seems to be around to overload the pl/sql objects and... prioritize a research on Oracle documentation around overhead and legacy
  http://docs.Oracle.com/CD/B28359_01/AppDev.111/b28371/adobjplsql.htm#i21148

• function and packages

  Hi friends,
  
  I have a requirement where in I need decode my source table values while inserting in my target table. I usually do my task by performing functions (don't use case and decode). My first question is
  
  (1) is using the function to accomplish these tasks is good. I have several of these conversion requirements.
  (2) Clubbing subprogrammes togther in packages is a good habit. But what should be the number of these subprogrammes. I can club togther 100 of this togther functions (a function of the average is 50 lines)? If this is not the case, what should be the thoughts of segregation?
  (3) are the oracle integrated like sqrt, length etc. deterministic functions?
  
  This code represents a typical requirement of the mine where in I map my name of source country in the target
  ID of country when migrating my data from the source to the target.
  
  

  create table source 
  (
  emp_id number,
  empname varchar2(100),
  sal number,
  country varchar2(100)
  );
  
  
  insert into source values (1,'ALEX',1000,'US');
  Insert into source values (2,'RAHUL',2000,'IND');
  Insert into source values (3,'KARTIK',3000,'IND');
  Insert into source values (4,'SHADOW',5000,'US');
  insert into source values(5,'LOUI',1500,'JAP');
  
  
  Create table source_country_code
  (
  country varchar2(100),
  abbrv  varchar2(100),
  area number,
  climate varchar2(100)
  );
  
  insert into source_country_code values ('UNITED STATES','US',10000,'COLD');
  insert into source_country_code values ('INDIA','IND',100000,'HOT');
  insert into source_country_code values ('JAPAN','JAP',1000000,'MODERATE');
  
  
  
  
  Create table target_country_code
  (
  country_id number,
  descr  varchar2(100),
  density number,
  weather varchar2(100)
  );
  
  insert into target_country_code values (101,'this is descrition txt 1',1001,'COLD');
  insert into target_country_code values (102,'this is descrition txt 2',1001,'HOT');
  insert into target_country_code values (103,'this is descrition txt 3',1001,'MODERATE');
  
  
  
  create table target
  (
  emp_id number,
  empname varchar2(100),
  sal number,
  country_id number
  );

  I generally functions for this kind of mappings. I have several of these requirements as indicated above and the
  cardinality of data is high.

  create or replace function transform (in_src_country varchar2) return number deterministic
  as
  l_country_id number;
  l_climate varchar2(1000);
  begin
  
  select climate into l_climate from source_country_code
     where upper(abbrv)=upper(in_src_country);
     
  select country_id into l_country_id
  from target_country_code
  where upper(weather)=upper(l_climate);
  
  return(l_country_id);
  exception 
  when no_data_found then
  return null;
  end;

  last step,
  
  so, what I usually do is
  
  insert into target
  Select emp_id, empname, sal, transform (country) in the source;
  
  
  
  As always, thank you
  
  Rahul
  
  Published by: Rahul K on 5 June 2013 10:51

  No technique is universally good or bad universally. You must understand your needs, the compromise and what you're trying to optimize for.

  If you don't care anything else you are looking for the absolute fastest performance, reduce what you have to do in PL/SQL is a good idea. Most of the people and most of the systems, however, prefer to have code that is a bit slower if it makes the code easier to maintain and easier to write or minimizes the number of places that the code is duplicated. If you attempt to load a data warehouse of company with billions of new lines every night, you're as almost exclusively worry about raw performance. And, if you design correctly, there is that one way to load any particular item of data, you don't have to worry about code duplication because there will always be an INSERT statement that inserts data in a particular table. If you build an OLTP application, on the other hand, it is very likely that there will be many places where you want to do something like search for a value and you are much less concerned about raw performance you're on maintainability and ensure that you do not duplicate the code. In these cases, well-designed functions and procedures are well worth the return miners (so if you do a query of single line as most OLTP systems are generally easier to treat if you write DSS queries that return millions of processing lines billionr lines.

  Justin

• APEX 4.2 translate data 'function and Global Variable declaration '.

  Hello everyone,
  
  I use APEX 4.2.1.00.08 and I wonder if there is a way to translate "Function and Global Variable declaration" textarea. Any other script text box is available for translation, but not this one.
  I know what the code is loaded on the header, but may contain important alert messages of global functions.
  
  Thanks in advance.

  Hi Grandmaster,

  "Function and global variables declaration" contains the JavaScript code, that is why it is not wise to include in the standard translation process.

  In my opinion, you have several options to access your translated messages:

  -) Use Application-> Substitutions or
  -) Store your message in the form of component shared-> SMS and and assign it to an application with the APEX_LANG element. Api MESSAGE (http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35127/apex_lang.htm#CHDBCEAB)

  In 'Function and Global Variable declaration' use substitution syntax to replace the value. For example:

  var myDeleteMessage = "&G_MY_DELETE_MESSAGE.";
  ...
  alert(myDeleteMessage);
  

  where G_MY_DELETE_MESSAGE would be a part of the application or the request for Substitution.

  Concerning
  Patrick
  -----------
  Member of the APEX development team
  My Blog: http://www.inside-oracle-apex.com
  APEX Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• What is the difference between size function and aggragate function?

  Hi Experts,
  
  In OBIEE 11.1.1.6.0, what is the difference between size function and aggragate MDB measure column function?
  If it contains material or detail information, I am very grateful to you.

  Hello

  Good example with screenshots-

  http://www.clearpeaks.com/blog/Oracle-BI-EE/aggregation-based-on-dimensions

  Mark this reply / helped.

  Concerning
  Young

• Oracle form functions and procedures in the APEX, how?

  I'm working to recreate in the APEX, already existing read only forms in Oracle Forms. Report features interactive APEX among other things, in fact worth as well as to target a different audience than utilizies versions of Oracle Form. Versions of Oracle Forms use a lot of pre and post query triggers, PLSQL functions.
  
  In Oracle Forms that places, these functions can be found in the "Units of program" section of the form. A feature typical of this kind, based on a particular Mission ID route, collecting names of regular passengers, is shaped with a comma and a space after each of them, in a single string that is returned and displayed the list of passengers of a line.
  
  I have all of this written code so I can move most of the main request of the Oracle form in an interactive report. These functions and triggers called in the form of the "Units of program" section of the Oracle form rather than stored in the database schema in a package, where they would go inside the APEX? Can I create a 'shortcut' in the APEX and call it from the interactive report "Source Région"? I can create the PLSQL function at the level of the region of the interactive report or page level? Or, my best bet creates a package that is stored in the database, all these functions and/or proecedures I might need the original form of Oracle?
  
  Some advice would be greatly appreciated.

  RLBickham wrote:
  I don't think I've been pretty clear in the description of the specific thing I want to do, simply, it does not reach the level of forms of conversion of the APEX. It is basically a problem of PLSQL function.

  I have an interactive report which is currently 90 percent of what I want however, each line, which represents a Mission may have several feet. Each arm has two places or ICAO codes attached to it. Based on the number of Mission, I want to loop through the array of leg, collect all the codes of ICAO for this Mission, put them together in 1 variable separated by a coma and add this variable to display the columns in this interactive report as the last column.

  In Oracle Forms, I have a function registered in the database, which is called in the main query. Maybe I ask a question that does not need to be asked, but anyway my question is can I put this function currently in the database somewhere within the interactive report and somehow reference it via Http, or should I just stick with set of functions and procedures in the packages stored in the database and called the conventional way?

  You could switch the function to the database and call it from the report query, but it sounds as if it were superfluous. In the report query using any form of Re: 4. How can I convert rows to columns? is appropriate for your version of the (unspecified) database.

  -----

  When you have a problem, you will get an answer faster, more efficient including information as much information as possible from the outset. This should include:

• Full version of APEX
  
• Complete operating system DB, version, edition, host
  
• Architecture of Web server (EPG, SST or APEX listener/host operating system)
  
• Browser (s) and version (s) used
  
• Theme
  
• Model (s)


• Region/section type (s) (particularly as to distinguish if a 'report' is a standard report, an interactive report, or indeed a 'update report' (i.e. a tabular presentation))

  With APEX, we also had the chance to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproduce things is the best way to solve most of the questions, particularly those relating to the layout and Visual formatting. If you expect a detailed response it is appropriate that you take on an important part of the effort by getting as much as possible with an example of the problem on apex.oracle.com before asking for help on specific issues, then we can see firsthand.